CCM we are getting timeout error.

Hello Gurus
In CCM2.0 & SRM4.0 we are having issue while creating shopping cart from CCM.We are getting timeout error.
When we checked report /CCM/CHECK_TREX it's not showing the master catalog file too.
We have tried full & delta publishing also but it didn't resolved the issue.
Can any have any suggesstion for it.
Best Regards.
Sandip.
Edited by: Saha Sandip on May 19, 2011 11:38 AM

Hi Sandip,
Please close this thread, it is already created on the SRM General forum.
Thank you
Lisa

Similar Messages

  • When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code".

    Hi Experts,
    When we post Inbound Invoice IDocs, we are getting an error message "Enter a tax jurisdiction code". As checked, we have configured OBCD and OBCA for the vendor and we are passing the Tax Jurisdiction code in E1EDP04 SAL segment. Can anybody give us some idea to resolve this issue.
    Regards,
    Sameek

    Hi Sameek,
    Please refer the below link. Hope it helps.
    http://scn.sap.com/thread/1435286
    Regards,
    Chandan.

  • Trying to upgrade to ISO 5 but always get timeout error

    Trying to update via PC/itune but get timeout error everytime. " network connection timed out " but nothing wrong with the connection.
    Any solution?

    Thks it went a bit longer but same error - using Kaspersky which I closed
    I am now trying it on my XP laptop (kaspersky closed) & it is downloading but 'time remaining is 2hrs!
    not happy to have an open system for that long

  • We are getting following error in test environment

    Hello, need suggestions. We are using wls 10.3.3. We deployed the application in one of the managed servers. We got stuck thread. I am not able to find the reason for stuck thread. I need help from any one.
    Here is the stack trace for stuck thread:
    ]", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
    Thread-20 "[STUCK] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, suspended, parked, priority=1, DAEMON> {
    sun.misc.Unsafe.park(Unsafe.java:???)
    java.util.concurrent.locks.LockSupport.park(LockSupport.java:156)
    java.util.concurrent.locks.AbstractQueuedSynchronizer.parkAndCheckInterrupt(AbstractQueuedSynchronizer.java:747)
    java.util.concurrent.locks.AbstractQueuedSynchronizer.acquireQueued(AbstractQueuedSynchronizer.java:770)
    java.util.concurrent.locks.AbstractQueuedSynchronizer.acquire(AbstractQueuedSynchronizer.java:1114)
    java.util.concurrent.locks.ReentrantLock$NonfairSync.lock(ReentrantLock.java:183)
    java.util.concurrent.locks.ReentrantLock.lock(ReentrantLock.java:262)
    oracle.adf.model.dcframe.DataControlFrameImpl.lock(DataControlFrameImpl.java:286)
    oracle.adf.model.dcframe.DataControlFrameImpl.beginRequest(DataControlFrameImpl.java:336)
    oracle.adf.model.BindingContext.setCurrentFrame(BindingContext.java:2102)
    oracle.adf.model.BindingContext.setCurrentDataControlFrame(BindingContext.java:2005)
    oracle.adfinternal.controller.util.model.DCFrameImpl.makeCurrent(DCFrameImpl.java:125)
    oracle.adfinternal.controller.state.ViewPortContextImpl.makeCurrent(ViewPortContextImpl.java:994)
    oracle.adfinternal.controller.state.RequestState.setCurrentViewPortContext(RequestState.java:151)
    oracle.adfinternal.controller.state.ControllerState.setRequestState(ControllerState.java:884)
    oracle.adfinternal.controller.state.ControllerState.synchronizeStatePart1(ControllerState.java:227)
    oracle.adfinternal.controller.application.SyncNavigationStateListener.beforePhase(SyncNavigationStateListener.java:95)
    oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.beforePhase(ADFLifecycleImpl.java:536)
    oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchBeforeEvent(LifecycleImpl.java:89)
    oracle.adfinternal.controller.lifecycle.LifecycleImpl.dispatchBeforePagePhaseEvent(LifecycleImpl.java:141)
    oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.dispatchBeforePagePhaseEvent(ADFPhaseListener.java:112)
    oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.beforePhase(ADFPhaseListener.java:58)
    oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.beforePhase(ADFLifecyclePhaseListener.java:44)
    oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:244)
    oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:157)
    javax.faces.webapp.FacesServlet.service(FacesServlet.java:246)
    weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:224)
    weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:108)
    weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:206)
    weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
    oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:134)
    weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
    oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:69)
    org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:411)
    oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:44)
    org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:411)
    org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:210)
    org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:126)
    org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:91)
    weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
    oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:94)
    oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:299)
    oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:406)
    oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:82)
    oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:70)
    weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
    oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:147)
    weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
    oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:114)
    weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
    weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:25)
    weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:55)
    weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3656)
    weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
    weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:308)
    weblogic.security.service.SecurityManager.runAs(SecurityManager.java:117)
    weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2204)
    weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2126)
    weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1412)
    weblogic.work.ExecuteThread.execute(ExecuteThread.java:198)
    weblogic.work.ExecuteThread.run(ExecuteThread.java:165)

    Hello Rene,
    We are using wls 10.3.2.0. We have one application deployed in one of the managed server. User is getting the error pop-up window with a message "Because of
    inactivity, your session has timed out and is no longer active. Click OK to reload the page". Even at the time of working continuously the user gets the message.
    Kindly provide any suggestions on this.
    Following are the settings in weblogic.xml file :
    <session-descriptor>
    <timeout-secs>3600</timeout-secs>
    <invalidation-interval-secs>60</invalidation-interval-secs>
    <cookie-name>ADMINCONSOLESESSION</cookie-name>
    <cookie-max-age-secs>-1</cookie-max-age-secs>
    <cookie-http-only>false</cookie-http-only>
    <url-rewriting-enabled>false</url-rewriting-enabled>
    </session-descriptor>

  • Getting timeout error while executing my report

    Hi experts,
    I need to get data from a Ztable which is having more than 64 millions of records. That query itself is taking more than 20 min to execute. I have used package size while retrieving tha data but still taking same time to execute, Giving me the TIMEOUT error .
    Provide some suggetions to use different types of SELECT quries that can be used to improve the performance.
    Thanks & Regards,
    Bhanu

    Hi ,
    I am working as an abaper for Service Management module.
    I need to show the prmise details inthe output of alv. Before that i need to get the meter reading details and need to do some calculations, by which i need to show idle one (Here only i need to hit a ZTABLE which is having more than 64 million records). For that idle premise user can select multiple pemises by using check boxes and can create notification by pressing a pushbutton 'CREATE IS NOTIFICATION' which exist on the application toolbar . So i can not run this report in background.
    Thanks & regards,
    Bhanu.

  • While posting the parked document, we are getting the error Message No.0034

    Dear Experts
    First we created Parked Document.
    After that when we try to post above said parked document, we are getting the below error:
    "Field BSEG-BUDGET_PD. does not exist in the screen SAPMF05A 0302
    Message no. 00349
    Diagnosis
    The specified field does not exist on the screen.
    Procedure
    Check your batch input data."
    Can any of you please provide the solution.....
    Thanks and Regards
    PVSRG

    But if you clearly observe the error which you have got, it says the Budget period is not on the screen.
    Check and try once again
    "Field BSEG-BUDGET_PD. does not exist in the screen SAPMF05A 0302
    Message no. 00349
    Diagnosis
    The specified field does not exist on the screen.
    Thanks

  • We are getting CX_SY_DYNAMIC_OSQL_SEMANTICS error

    When we run BEx queries (not all), we are getting a dump error shown above with the name of a temporary table.
    The table exists in the data dictionary but not in the oracle database.  We have been running prepare for an eminent upgrade, but we have been told that that can not be causing this problem.
    we have moved no changes into our Production environment.
    any help would be greatly appreciated.

    You don't understand - this error comes up when we run specific BEx queries.  It was working yesterday, but today it is not.  Our support package did not change from yesterday.  We did not apply any OSSnotes.
    We are however doing pre-prepare on our Prod system.
    The temporary table is used to store SIDs for use in the join.  the table exists in the dictionary, but not at an Oracle level.

  • Rest calls are getting 406 error with beta refresh

    We are seeing that our REST API calls are getting http 406 error. We have not made any changes on the REST Service. In Console, i see following messages that might be related to this issue.
    8/31/12 9:33:23.259 PM TAOMobile: -JSONValue failed. Error trace is: (
    "Error Domain=org.brautaset.JSON.ErrorDomain Code=11 \"Unexpected end of string\" UserInfo=0xc0ab830 {NSLocalizedDescription=Unexpected end of string}"
    8/31/12 9:33:23.265 PM TAOMobile: -JSONValue failed. Error trace is: (
    "Error Domain=org.brautaset.JSON.ErrorDomain Code=11 \"Unexpected end of string\" UserInfo=0xaec1590 {NSLocalizedDescription=Unexpected end of string}"
    Here is how we make the call.
    RestServiceAdapter restServiceAdapter = Model.createRestServiceAdapter();
    restServiceAdapter.clearRequestProperties();
    restServiceAdapter.setConnectionName("TAORestWebService");
    restServiceAdapter.setRequestType(RestServiceAdapter.REQUEST_TYPE_GET);
    restServiceAdapter.addRequestProperty("Content-Type", "application/json");
    restServiceAdapter.setRetryLimit(0);
    restServiceAdapter.setRequestURI(argRequestURI);
    String response = "";
    // It's a GET request, so there's no payload
    response = restServiceAdapter.send("");
    System.out.println("Response from the server: " + response);

    Added this after looking at one of the forum entry.
    restServiceAdapter.addRequestProperty("Accept", "application/json; charset=UTF-8");
    And issue is resolved. Documentation update in sample code would help others.
    Edited by: Chandresh on Sep 4, 2012 2:36 PM

  • Getting timeout error while updating a record from c#

    Hi,
    I have around 30k records in a tables. When I update that record inside the Transaction (Enterprise Data Library, c#) , it takes long time and throws timeout error.
    But I am able to update the same record via Toad.
    In the morning I tried same updating the record, it works without any change in the code or script.+
    is it due table lock or db related issue? please adivse, how to resolve if occurs again.
    anand

    Code:
    private static void Save()
    using (DBTransactionManager dbTransactionManager = new DBTransactionManager())
    try
    DataTableDAL.Instance.ExecuteDML("Update Voyage SET BallastBonus = 30000 WHERE ID = 'AE53B610BEA743EC8AFBAED0C8349BF8';");
    //commit database
    dbTransactionManager.Commit();
    catch
    dbTransactionManager.RollBack();
    throw;
    Table
    Column Name     ID     Pk     Null?     Data Type     Default     Histogram     Encryption Alg     Salt
    ID     1     1     N     NVARCHAR2 (32)          None          
    CALCNUMBER     2          N     NUMBER (10)          None          
    CURRENCYID     3          N     NVARCHAR2 (32)          Frequency          
    CALCTYPE     4          N     NUMBER (5)          Frequency          
    ESTIMATEDESCRIPTION     5          Y     NVARCHAR2 (200)          None          
    ESTIMATEGROUPDESCRIPTION     6          Y     NVARCHAR2 (200)          None          
    BALLASTBONUS     7          Y     NUMBER (12,2)          None          
    BALLASTBONUSCOMMPCT     8          Y     NUMBER (6,3)          None          
    ISESTIMATE     9          N     NUMBER (1)          None          
    ADDITIONALSTEAMVALUE     10          Y     NUMBER (8,4)          None          
    ISADDITIONALSTEAMPCT     11          Y     NUMBER (1)          None          
    ADDITIONALPORTVALUE     12          Y     NUMBER (8,4)          None          
    ISADDITIONALPORTPCT     13          Y     NUMBER (1)          None          
    CREATEDBY     14          N     NVARCHAR2 (32)          Frequency          
    CREATEDDATE     15          N     DATE          None          
    UPDATEDBY     16          Y     NVARCHAR2 (32)          None          
    UPDATEDDATE     17          Y     DATE          None          
    LUMPSUMCARGOCOST     18          Y     NUMBER (1)          None          
    BUNKERPRICEMETHOD     19          Y     VARCHAR2 (30 Byte)          None          
    INCCONTCALCRESULT     20          Y     NUMBER (1)          None          
    FINAL_EST     21          Y     NUMBER          None          
    SPOT_VOYAGE     22          Y     NUMBER (1)          None          
    ISRUNCOSTEDIT     23          Y     NUMBER (1)          None          
    Index
    Table doesnt have any index, except primary key index.
    Total Records
    35,000
    Hope this input might sufficient to help me.

  • Hello, we are using Lab View, to run testers, for checking our production parts. At different times during testing we are getting an error message with a number indicating something.

    The number appears to be different every time. The error will stop the test. Sometimes, the test will complete, but instead of passing or failing, we get an error message. Most times these keep comingup every other or every 3rd part.Most times we can reset the problem, and at least get rid of the errors for a while, by shutting down the whole system, including the main disconnect. Then powering back up. HELP!! This has been going on too long!!

    What's the error number and message? Is it a LabVIEW error code or a user created one?

  • HT1222 I have to keep getting error messages when downloading the IOS 7.  All my Apple devices are getting the error message.  I tried several times to download.

    How is that I'm already experiencing a problem downloading the updated software on my Apple products?

    The servers are getting slammed. Tonsof people trying to download at the same time.  Give it time and keep trying.

  • We are getting ODBC Error while connection to Universe?

    HI,
    While creating a report i am getting following error. Please give me solution for that.

    Check your system ODBC Data source administrator.
    Control panel-->administrative tolls-->ODBC Data source administrator.
    If your data source not added earlier, then add now. You will not get any error.
    Regards,
    Chandrakanth.

  • Getting Timeout Error when running web performance Webtest using App-Insights

    Hi All,
    I have created web performance test using VSTS 2013. When I am running this test using App-Insights (Azure Version) I am getting error "Web Test exceeded the configured timeout (00:02:00) and was aborted." In webtest property I set timeout limit
    is 300 Sec. still webtest is timeout in 2 min. Kindly let me know Is this problem of App-Insights (Azure Version) or webtest?
    Regards,
    Sandip

    Sandip, Application Insights (both the Azure and VSO versions) override the timeout internally to a max of 2 minutes. No web tests in AI can run for longer than 2 minutes.
    This posting is provided "AS IS" with no warranties, and confers no rights. Use of included script samples are subject to the terms specified at http://www.microsoft.com/info/cpyright.htm

  • I have just restored data from an external hard drive, but half of my iTunes songs are getting the error "original file cannot be located."  Where are these files?

    My Windows 7 PC just had to be reformatted, and I have retrieved all of my files from an external hard drive.  About half of my iTunes library is working fine, the other half pop up the error statement "original file cannot be located."  If they haven't come off my external drive, where are they?

    This happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
    Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
    Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
    tt2

  • Uploaded a video in my site but users are getting an error message on the screen.

    Has anyone else experienced this type of problem? I created a video and uploaded to my website at: http://www.moulinrougeclothing.com I received feedback that my members were not able to view it. They saw on screen "The Adobe Flash Player or an HTML5 supported browser is required for video playback."
    Can someone clarify what I need to do to get this working for them?
    Thanks!

    I don't see any Flash content on the link you provided.

Maybe you are looking for

  • Need help regarding Linked List

    I'm a beginner who just spent ages working on the following code.. but need help on re-implementing the following using a linked list, i.e. no array is allowed for customer records but you still can use arrays for names, address, etc.. Hopefully I've

  • I'm having trouble with using Calculated-User Can Override, it will not honor my overide

    I'm having trouble with using Calculated-User Can Override, it will not honor my overide.  I'm using LiveCycle Designer ES v.8.2

  • CAD Client Configuration on UCCX 8 Question

    I have a brand new install of UCCX 8.0.2 ES1 stand alone Premium Packaged System installed with CM version 7.1.3. I'm having issues getting the desktop monitor to work. CAD Supervisors keep getting the pop up error "Supervisor has failed to start dev

  • Color profile doesn't match print output

    Why do my prints come out much darker than they appear on the monitor? I edit in Adobe 5 and print from Lightroom 3  with monitor calibration (Spyder software), and ICC profiles for my Epson paper, printed on my Epson printer. 

  • Drop down image problem

    I am designing my web page with Dreamweaver. I'm on a Mac and using Safari as my primary browser. However, when I check a drop down menu for a series of buttons, I get a duplicate "ghost" image of the menu when I check with Foxfire. It is in a positi