CCME Call Forward from one Hunt Group to another Hunt Group Failure
Hi I have a couple of hungroups in Cisco Call Manager Express. I am trying to configure a Call Forward no answer from one hunt group to another. Does anybody know if this is possible? If so, is there a config available? Here is my config, but it is not working.
Thanks,
Derek
voice hunt-group 20 parallel
final 2290
list 2201,2251,2252
timeout 30
pilot 2209
Hi Derek,
This is supported with the restriction shown below;
final number
Router(config-voice-hunt-group)# final 8888
Defines the last extension in a voice hunt group.
If a final number in one hunt group is configured as a pilot number of another hunt group, the pilot number of the first hunt group cannot be configured as a final number in any other hunt group.
From;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmecover.html#72373
Cheers!
Rob
Similar Messages
-
Moving Pages from one Page Group to Another Group
Hello,
How do you move pages, styles, or items from one page group to another page group?
On the same machine, I have three page groups called Production, Acceptance, and Test. Once I set up a page that I like on the page group Test, what is the best way to move the page(and its items, portlets,etc) to the page group Acceptance, and then move it into Production?
Also, how does security and approvals affect this? There is only limited amount of people that are able to get into the Test Page Group, or Acceptance Page Group. Would any copying process make sure the page approvers be copied across correctly? Or will manual intervention be needed.
I'm using Oracle Portal Release 2 (9.0.2) running on a solaris machine.
Much thanks for your assistance.
Ansonhi There,
As far as i know, the pages can only be moved within the page group but not from one page group to another page group.
Regards,
Deepak -
Stopping call forwarding on one of two numbers?
HI,
I have two Sype numbers, the main one for the UK and a new one that I bought a couple of months ago, a Hong Komg number.
The HK number used to be used by a tourism website, and although they have changed their main number on their website, references to the old number still exist in a few places and I get calls, sometimes several a day to the number.
I have contacted the company in HK twice and asked them to clear up the problem, but I suspect that the calls come from external websites that they don't control and are unable to remove the numbers.
So, I would like to stop call forwarding on one of my numbers, but it doesn't seem like this is possible, which is obviously ridiculous but hey ho.
I am therefore trying to cancel the HK number, but when I go to the cancel page and hit cancel the page just reloads without doing anything. I also believe that the number stays valid until the yearly payment runs out.
Questions then, can I cancel the number and peoperly kill it, so I stop getting these calls?
Many thanks,
Tom.Hello and welcome to the Skype Community.
Checking your options. Canceling the HK Number wouldn't be effective until it expires on February 16th 2016, Which error message [if any] do you receive when you try to cancel call forwarding to the HK Number?
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you. -
How to access the screen from one function group to other function group
Hi Experts,
How to access the the screen from one function group to other function group.
Please help me on this , Bcoz it is client requirement i need to finish this urgently.
Please
Thanks
BasuHI ,
You can do a call transaction or submit and return
Regards,
Sooness. -
Free Goods from One Material Group to Another Material Group
Salute Masters!!
I need your valuble suggestion, please provide.
I need to configure Free Goods of Material Group to Material Group.
User want:
1) Free Goods from one Material Group to another Material Group, like F010 to F040
2) User should have option to change from one Material Group to Other Material Group, which He / She want, like F010 or F020, F030, F040 any one of them.
Suppose;
Line Item Material Belongs to One Group Quantity in Gallons Free Goods from Any Material Group Quantity in Gallons
1 A 3 F010 4
2 B 3 F020
3 C 4 F040
Any No. of Line Item Any No. of Material
from One Group Total 10 From Any Material Group
(Comprising of 3-4 Different Material from 1 Group, they should be able to choose/provide Free Goods from other Material Group)
3) While creating Sales Order what Quantity (Gallons/No./Ltr) to be put?
How I can configure this scenario?
Please suggest, is it possible through KEY COMBINATION?
Rgds.
Srivastav
+91 7829755109
Skype ID: sanjai.srivastav1Hi,
if you want to give free goods from other group it can be possible only for EXCLUSIVE free good type
In exclusive free goods, a material different from the orignal material can be specified as the free goods.
Example: A customer who buys 200 crates of beer, gets 5 boxes of glasses free.
In VBN1 >> Exclusive
See column ADD FREE MATERIAL
While creating Sales Order what Quantity (Gallons/No./Ltr) to be put?
Maintain alternative units in material master >> Additional data >> Material master,BUT it is only main item
Those item u want to give free that items unit is derived from free goods condition record and it CANNOT be change in order -
How to transfer the tables from one file group to another file group in SQL 2008.?
Hello all,
I have few issues regarding the transfer of the tables from one file group to another file group in SQL 2008 and also How can we backup
and restore the particular database based on file group level.
Let’s say I have a tables stored within the different FG. such as
Tables
File group
Dimension tables
Primary
Fact tables
FG1
FG2…
zzz_tables
DEFAULT_FG
dim.table1 DEFAULT_FG
dim.table2 DEFAULT_FG
Here all I want to transfer the dim.table1 ,dim.table2 from DEFAULT_FG to the Primary File
group .So is there simple methods for transfer the dim.table1,2 from one FG to another .I have tried somewhat but I couldn’t get the exact way .So if someone have better idea please share your knowledge that would be really appreciated.
Secondly after moving those dim.table1 ,dim.table2 from DEFAULT_FG to Primary ,All I want to backup and restore the database only containing the Primary and FG1,FG2… not
a DEFAULT_FG.Is it possible or not.?
Hope to hear from the one who knows better approach for this kind of task .Your simple help will be much appreciated.
Regards,
Anil MaharjanWell after all my full day research on this topic had paid off, I finally got the solution and am so happy to research on these things. It makes
us feel really happy after all our research and hard work doesn't goes as waste.
Finally I got what I am looking for and want to make sure that I am able to transfer the tables from DEFAULT_FG to another FG without tables
having clustered index on that tables .
With the help of the link below I finally got my solution where Roberto’s coded store procedure simply works for this.
Really thanks to him for his great post and thanks to all for your response and your valuable time.
http://gallery.technet.microsoft.com/scriptcenter/c1da9334-2885-468c-a374-775da60f256f
Regards,
Anil Maharjan -
Move a query to from one user group to another user group
Hi,
it's possible to move a query (SQ01) from one user group to another user group ??
Thank you.Hi,
You can copy queries only if you have the authorization to make changes. Within your current user group, you can copy all queries. However, queries of other user groups can only be copied if the InfoSet used to define the query is assigned to both user groups.
To copy a query, proceed as follows:
1. Choose the name of the query you want to copy on the initial screen.
If you do not know the name, use the directory functions to display the query directories and then choose a query to copy from there.
2. Choose Copy.
3. Enter the name and the user group of the query that you want to copy in the dialog box. Furthermore, you must enter a name for the copied query. The system proposes values for this.
4. Choose Continue.
This takes you to the initial screen. The query is added and appears in the query directory. You can now continue.
Regards,
Amit -
How to move Tablespace from One disk group to another disk group in RAC
Hi All,
I have 11gR2 RAC env on Linux.
As ofnow I have problem with disk group. I have 3 disk group which is almost full - 98%. I have added one NEW disk group and want to move some of the Tablespace(TBS) from OLD disk group to NEW diskgroup and make some free space in OLD disk group.
Can any one suggest me how to move TBS from one disk group to another disk grup without shutting down the instance.
DB is in Noarchive mode.
Thanks...user12039625 wrote:
Hi Helios,
Thanks for doc id but I am looking for noarchive mode solution. becaues I got ORA-
"ORA-01145: offline immediate disallowed unless media recovery enabled " when run alter database datafile '...' offline.
Hence I am trying something and findout below steps but not sure how useful it is:
1- put tablespace offine
2- Copy the file to new diskgroup using Either RMAN or DBMS_FILE_TRANSFER.
3- Rename the file to point to new location.
4- Recover the file.
5- Bring the file online.
I had move 240M TBS from OLE to NEW.
These steps run successfully so I think this is valid for noarchive mode.Hence want to confirm..so inform me please.
Thanks :)I have doubt in my mind:
1. You database is in noarchivelog mode
2. You're taking tablespace offline
3. Suppose you're moving a file of size 10GB(or any larger filesize) to another disk group
4. Now after moving the file, you're trying to bring the tablespace online............NOW
tablespace will need recovery. if the required data is inside the SGA then it is ok. But if the data has been flushed, then?
if step 2 and 3 has taken significant time, then most probably you'll not be able to bring that tablespace online.
Regards,
S.K. -
Copy a page from one page group to another
Hi
Is it possible to copy a page from one page group to another?
Regards,
LeneHi ,
Through Portal it is not possible to copy a page from one page group to another .
There is a feature in Portal WebDav .
Through a DAV client you can copy page to your local system as a folder and then drag the page to the pagegroup you want to copy .
Regards
Medini -
Copying page from one page group to another
I need to copy one page or multiple from one page group DEV to page group TEST. I thought of using Portal Export/Import feature for the same, but it will ask for same page group at import.
Requirement is to keep one set of page group for DEV stage, when it got completed move it to TEST page group in same instance.
How we can achieve this functionality using single portal instance?
Thanks & regards,
PreetI did not understand this and isn't working for me. :(
The message I receive when I click on the Copy link on the Navigator is:
Click "Copy Here" next to the page under which you want to create a copy of your page. Click the link next to the page group to create the copy under the root page of the page group. You can create a copy of a page only under a page in the same page group as the original page.
And it only displays the current page group with a tree structure of all the pages in the current page group (page group name being the root).
Please help me on this as I have a similar requirement and am using 10.1.2 version of Oracle Portal. -
Transfer Employee From one Business group to another
Hello,
As per my understanding we do have a functionality of transferring employee from one business group to another. Can any one tell me the exact steps for the same. It is there from 11.5.10 and the profile setting we have to set is HR: Propagate Data. Can anyone tell what from here I need to do for a transfer for employee between business group.
Thankshello Pdelapena,
Benefit tab is not available for all BG responsibility, like india is not having the benefit tab.
Secondly if i want to go for some Long range compensation say an employee has worked for 2 yrs then he is eligible. Now technically speaking the the transfer employee should be eligible for the same. But if we terminate him and then hire him back in the new BG only the thing that is same is Party_ID apart from that is nothing same. Can you please put some suggestions.
Eg: Person Hired on 10 Jul 2007 in US BG
Person Transferred to India BG on 20 Jul 2008
Now the company plans to give a compensation to all the employee who have been part of the company for 2 yrs or plus till 20 Jul 2009
Now this particular employee will not be pulled out in the eligibility criteria.
Can any one please pass there comments
Thanks
Nitin -
Copy wage type from one country grouping to another
Hi,
How can I copy a wage type on transaction PU30 from one country grouping to another, where wage type group is 00TR (Trip costs)? I need this copy for Finland, because it doesn't have this wage type group.
Thanks.
SóniaHi Sonia,
we are facing a similar issue. Kindly let us know how you were able to copy the wage type group 00tr and also the model wage types for travel expenses.
would appreciate your immediate reply.
thanks & regards
rao -
Copy a group of cost centers from one controlling area to another
Hello,
is it possible to copy a group of cost centers from one controlling area to another?
Or a group of internal orders?
Thanks
JasminaNo. If you used any upload tools like LSMW, perhaps you may use that for uploading the second controlling area.
-
Move group of pages from one InDesign file to another InDesign File using VB.Script
Dear team,
I am trying to move group of InDesign pages from one indesign file to another indesign file using vb.script.
I have written the code like
Dim Pages=IndDoc.Pages
Dim Mytype=TypeName(Pages)
Pages.Move(InDesign.idLocationOptions.idBefore,IndDoc1.Pages.LastItem)
but it is giving an error as method Move is not a member of Pages
please give mme the solution to move the Multiple pages or a group of page from one Indd to another Indd.Hey Peter, if I wan to move several page that part of Auto Flow text, I checked the "delete page after moving" but the content still there, not deleted.
Is there any way to delete it automatically, just to make sure I have moved that autoflowed page? -
Moving the Individual Protection group from one SAN Volume to another SAN Volume
Hi Professionals
Dudes !!! There is no much information about migratedatasourcedatafromdpm.ps1
script on the technet. My question is that I need to move Individual Protection group in an orderly manner from one SAN Storage to Another. I have more than 30 protection groups. I want to move individually 2 to 3 protection groups at one time from
Old SAN Storage to New SAN storage. Is it possible that I mention protection group individually and move each protection group bit-by-bit to the new SAN Storage.Hi,
you can use this GUI Option, to move a whole Disk.
in the next Version, hopefully published this Week, you can select a whole Protectiongroup to move
http://gallery.technet.microsoft.com/Migrate-DPM-Disk-or-dea8d4e9
Seidl Michael | http://www.techguy.at |
twitter.com/techguyat | facebook.com/techguyat
Maybe you are looking for
-
Why can't I use the scroll wheel in Photoshop CC 2014?
Hi, I have Photoshop CC 2014 on my laptop. It was working perfectly but then I had to reinstall Windows. Once I had reinstalled Windows and Photoshop I discovered that I could no longer use the scroll wheel on my mouse to move around documents in Pho
-
Someone please help me out, this is for a project and i'm clueless on what i should do.
-
My mom passed me her phone as she couldn't get it to restart. I got it to charge and restart in recovery mode. However, I've tried all steps on this and many other forums and it is stuck in "trying to restore". On the phone, it will blink a white
-
Prime Infrastructure 2.0 email alerts with hostname?
I have configured email alerts however in the message it shows up with the IP address instead of hostname. Is there a way to configure the hostname to be added? Custom text or adding the switch differently (added by direct IP search)? Thanks, Chris
-
Rename 'Work Instruction' in PI Sheet
Hello All: Is there any way to rename the "Work Instruction' that appears at hte beginning of every Web Based PI sheet ? PPPI_INPUT_GROUP works only with repated data requests table names