CCMS Agent Issue in Central Monitoring System

Dear Guru's,
We are configuring the CCMS Agent in our landscape, while registering the CCMS Agent we're facing some issue.
CEN system - Only ABAP Stack - ECC 6.0 Ehp3
Target System - Double stack (ABAP + JAVA, Netweaver 2004s)
After completing the Visual Admin settings. Service file SAPCCMSR.99 has
been generated automatically. As per the help.sap the service file should
be SAPCCMSR.<Instance No.>, our instance no. was 00 but its was generated
with 99 (SAPCCMSR.99).
Two RFC has been created in Double stack system and one RFC has been
created in ABAP system.
RFC in ABAP system :
SAPCCMSR.HOSTNAME.00 - its not working
(Error Details, ERROR:program hostname.sapccmsr.00 not registered)
RFC in Dual-stack System :
SAP.CCMS.J2EE.SID - its working
SAPCCMSR.HOSTNAME.00 - its not working
(Error Details, ERROR:program hostname.sapccmsr.00 not registered)
While testing the Remote System Topology, we're getting communication
error.
In RZ21, Topology - Agents for Remote Systems - Display Overview, Agent
for SAP System SID tab, Agents for Remote SAP Systems, selecting the
available system (Dual stack system) and give Test Connection means
its throwing Error opening an RFC connection - SAPCCMSR.HOSTNAME.00
Could you please suggest, what we're missing.
regards,
Guna

Hi,
Thanks for your reply.
What your said was rite, but I'm unable to get J2EE (Java Stack) alert information in RZ20 of the same system, coz., its dual stack system. If we don't have any issue in Java means it should be updated in RZ20 of the same system.
In Dual-stack System:
RZ20 -> CCMS monitor sets -> SAP J2EE Monitor Template -> All Systems -> SID -> J2EE Engines, J2EE Applications, J2EE Log files... these are not updating here.
Could you kindly suggest for above issue.
regards,
Guna

Similar Messages

Solution Manager and external Central Monitoring system

We have a Solution Manager system SOL and a Central Monitoring system
CEN. The monitored system SDS is configured to report CCMS data to CEN
and I wanted SOL to be able to access this data. After configuring SDS
to CEN, CEN that the following entry in RZ21:
SDS#SDS_RZ20_COLLECT#SDS_RZ20_ANALYZE
After performing the wizard in SOL, SOL now has the following entries
in RZ21:
SDS2#SM_SDS2CLNT200_READ#SM_SDS2CLNT200_TRUSTED
This would indicate to me that SOL is reading the CCMS information
directly from the monitored system, rather than via CEN.
In the 'Setup System Monitoring' of Solution Manager the Central
Monitoring System and CEN destination are SOL and NONE respectively.
Is this configuration correct, and if not how do I correctly configure
it?
Is the monitored system now only reporting data to SOL, or is it
reporting to both CEN and SOL?
Regards,

Issue closed

Java Stack for Central monitoring system

I believe for central monitoring with only ABAP stack is sufficient to monitor both remote ABAP and JAVA stacks. For this purpose CCMS and GRMG can be used. My questing is there any need to have JAVA stack in central monitoring system? If yes, what are the things that only ABAP stack can not do alone and JAVA stack is required in central monitoring system?

Hi,
>
> it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
>
You should created this user in working client.
> Can you guys please help me to configure properly?
>
> One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
>
You can use RZ21 or System monitoring through work center. From Solution manager 7.1, you need to use work center only. So, I would suggest you to use work center only.
Thanks
Sunny

Xi3.0 Monitoring using a Central Monitoring system

Hi Guys
Has any of you managed to integrate XI3.0 SLD into Solution Manager 3.10 SLD or is it just not possible?
Have you figured out how to setup XI3.0 and Alert management to integrate that into a Central Monitoring system?
/tobbe

Hi Guys
I guess the obvious solution to my very own question would be to...
1. Install a 640 J2EE instance as a MASTER SLD
2. Configure both XI and Solution Manager to call "MASTER SLD" for info.
I will produce a document and publish it here as soon as I am done with the installations and configurations
Thanks for a great TechED
/Tobbe

How to explain that CCMS Agent doen't effect for system perfformance ?

Hi All,
My customer worries that installation of ccms agent in their production system will be effecting overall system performance.
is that any explanation that i can use to explain that ccms agent doen't burden the production system because they have internal mechanizem to collect all the performance data.
Thank You and Best Regards
Fernand

Office 2011 Removal
Office 2011 Removal (2)
MacKeeper Removal
MacKeeper Removal

Configuration for Central Monitoring System in SAP Solution Manager.

Hi Folks,
I am trying to setup Central System Monitoring in SAP Solution Manager, I am following the document which mention the step by step instructions.
There are couple of items on which I am really confused.
In the documentation it says to activate Background Dispatching & Central System dispatching in 000 client of Solution Manager,
it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
Can you guys please help me to configure properly?
One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
Also, is there any document which clearly explains the setup of Central System Monitoring in SAP Solution manager using both approaches and also to test the monitoring?
I have SAP Solution Manager 7.0 EHP1.
Thanks.
Jennifer

Hi,
>
> it also mentioned about creating CSMREG user, but it did not say in which client this activity needs to be performed, and there are lot many steps in which there is no mention about the client of solution manager in which we have to perform the configuration.
>
You should created this user in working client.
> Can you guys please help me to configure properly?
>
> One set document which I saw talks about the configuration using RZ21 and other document discuss about Configuration using System Monitoring Work Center, which one do we need to follow, are both methods are 2 different options doing the same thing, can you please clarify?
>
You can use RZ21 or System monitoring through work center. From Solution manager 7.1, you need to use work center only. So, I would suggest you to use work center only.
Thanks
Sunny

Error while registering CCMS Agent !!!!

Hey,
I was trying to configure the SAPCCMSR agent in the development PORTAL which is a JAVA (Non ABAP) stack through "J2ee Visual Administrator".
I am getting the following error:
1 ) ERROR: DSR: Dynamic Library dsrlib.o is Non-Unicode.
Cannot load this library
2) ERROR: Cannot open Monitoring Segment 0 rtc = 245
3) Error during registration of CCMS Customizing destination
User not authorized. Session terminated
Please guide me on this.
Regards,
Ashish .A. Poojary
Edited by: Ashish Poojary on Nov 6, 2008 11:20 AM

Hi Ashish,
refer this link.
http://help.sap.com/saphelp_nw04/helpdata/en/48/6a76607a7c91409474ad6c7b6f5a26/frameset.htm
Re: CCMS agent registration on central system
Regards
Supraja

Cannot stop and start CCMS agent

Hi experts,
I'm new to SAP and here we have problem on sapccmsr agent not running. Previously the sapccmsr was running fine until one day it is not. When i tried to start the application, it says that theres another CCMS agent running with the profile:
bcuser> code/libs/sapccmsr -DCCMS pf=saploc/oscol.pfl
INFO: CCMS agent sapccmsr working directory is /sbdc/sapbc47/Server/packages/SAPMonitoring/saploc/PRFCLOG/sapccmsr
INFO: CCMS agent sapccmsr config file is /sbdc/sapbc47/Server/packages/SAPMonitoring/saploc/PRFCLOG/sapccmsr/csmconf
INFO: Central Monitoring System is [M04]. (found in config file)
INFO: Checking shared memory status of sapccmsr
Another CCMS Agent is already running with this profile.
EXITING with code 0
bcuser> ps -ef | grep sapccmsr | grep -v grep
bcuser>
And when i tried to stop the sapccmsr manually, it failed:
bcuser> code/libs/sapccmsr -stop pf=saploc/oscol.pfl
INFO: CCMS agent sapccmsr working directory is /sbdc/sapbc47/Server/packages/SAPMonitoring/saploc/PRFCLOG/sapccmsr
INFO: CCMS agent sapccmsr config file is /sbdc/sapbc47/Server/packages/SAPMonitoring/saploc/PRFCLOG/sapccmsr/csmconf
INFO: Setting Stop Flag for sapccmsr
INFO: Waiting for background process to stop...
INFO: Background process has not stopped after 10 seconds.
INFO: Process might be busy..
INFO: Please try again.
EXITING with code -1
bcuser>
Yeah i think it is because there is no sapccmsr processes running!
My question is; how to force the sapccmsr to start? I already delete the sapccmsr.pid but no success.
The last resort would be to restart the box but unfortunately, thats not the feasible option... for the time being...
Please help....
Thanks in advance

try to execute execute ./sapccmsr pf=/usr/sapSID/SYS/profile/PROFILE -j2ee -initshm
filter on
INFO: Attached to Shared Memory Key 73 (size 60000000), no pool used
so you see the size of the shared memory is 60000000
then execute on solaris
ipcs -ma |grep 60000000
this will result in keys with size 60000000
m 108039 0x4761 rw-r--- eppadm sapsys eppadm sapsys 1 60000000 4955 20441 11:40:28 11:40:28 8:30:38
m 5744 0x3d9d rw-r--- yppadm sapsys yppadm sapsys 1 60000000 29224 29224 15:22:23 15:22:24 15:22:23
m 30323 0x3f91 rw-r--- yppadm sapsys yppadm sapsys 1 60000000 29480 29480 15:22:33 15:22:35 15:22:33
m 150522485 0x46fd rw-r--- eppadm sapsys eppadm sapsys 4 60000000 21181 5909 12:05:31 12:05:31 17:03:39
in this case there are 4 with size 60000000 our instance EPP both ccms agents had a problem so we cleaned those 2 entries
ipcrm -m 108039 -m 150522485
afterwards the agents were able to start

CCMS agent installation

Hi Experts,
I am doing SAP CCMS agent installation to monitor a non-SAP system which will be monitored by a Central monitoring system.
I have followed all the steps as:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/adf7409b9d8531e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/e2/eff640fa4b8631e10000000a1550b0/frameset.htm
1. communication user CSMREG in Central monitoring system.
Created the CSMCONF start file for CCMS agents in monitoring system.
2. CCMAGENT.SAR , SAPOSCOL.SAR , INSTALL_WIN.SAR
And done the configurations required in the monitored system.
3. Register the CCMS agent with CEN and start the agent. By following this step:
<hostname>\saploc\prfclog\sapccmsr.exe -R*
while registering the CCMS agent ,
I ma getting this...
This CCMS agent program sapccmsr is able to actively report alert data into the monitoring system[CEN], which is the central monitoring system.
to enable this feature, you have to setup the user CSMREG in [CEN].
After entering the RFC logon info for the user,
client:001
user:CSMREG
language:EN
host name:
load balancing:n
system number:01
router sting :optionla
trace lavel:0
password for CSMREG user:********
Its showing this error:
ERROR: RFC error during logon: 105 DESTINATION_NOT_EXIST
How to solve this?
Do I have to do any RFC configuration in the Central monitoring system(as I want to monitor a non-SAP system)?
urgently required.
Any help will be appreaciated.
Regards
Manisha

Hi Manisha,
Yes you will have to create a RFC and a suitable RFC user in the Central Monitoring System (CEN) via txn RZ21 to monitor these remote systems.
Please follow this link:
http://help.sap.com/saphelp_nw04/helpdata/en/a8/adf7409b9d8531e10000000a1550b0/frameset.htm
Please award suitably if helpful.
Regards, Dibya

Installing CCMS agent fails: calling SALS_MS_GET_LOCAL_MS_INFO via RFC

Hi All,
I'm trying to connect our SolMan development to the CEN. However when registering ccmsr within J2ee admin it gives the following errors.
Does anybody have an idea?
Output for : /usr/sap/DSM/SYS/exe/run/sapccmsr(-j2ee,-v,pf=/usr/sap/DSM/SYS/profile/DSM_DVEBMGS00_ijmdsm01)
CCMS version 20040229, 64 bit, multithreaded, Non-Unicode
compiled at Oct 28 2006         systemid 324 (IBM RS/6000 with AIX)
relno 7000
patch text patch collection 2006/4, OSS note 914721
patchno 83         intno 20050900
running on ijmdsm01 AIX 3 5 00C97C6E4C00
Logfile for : /usr/sap/DSM/SYS/exe/run/sapccmsr(-j2ee,-R,-f,/tmp/csm53771.conf,pf=/usr/sap/DSM/SYS/profile/DSM_DVEBMGS00_ijmdsm01)      [Thr 01]   Mon Mar 26 13:29:05 2007
INFO: CCMS agent sapccmsr working directory is /usr/sap/ccms/DSM_00/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/ccms/DSM_00/sapccmsr/csmconf
INFO: Central Monitoring System is . (found in config file)
INFO: additional Central Monitoring System is . (found in config file)
INFO: found ini file /usr/sap/ccms/DSM_00/sapccmsr/sapccmsr.ini.
INFO: Checking Distributed Statistical Records Library dsrlib.o
INFO: checking version an Unicodeness of dsrlib.o
INFO: DSR: Dynamic Library dsrlib.o (version 22) successfully loaded.
INFO: DSR: Dynamic Library dsrlib successfully loaded.
INFO: DSR: Path /usr/sap/ccms/DSM_00/dsr for Distributed Statistical Records.
INFO:         CCMS version 20040229, 64 bit, multithreaded, Non-Unicode         compiled at Oct 28 2006         systemid 324 (IBM RS/6000 with AIX)         relno 7000         patch text patch collection 2006/4, OSS note 914721         patchno 83         intno 20050900         running on ijmdsm01 AIX 3 5 00C97C6E4C00         pid 479452         profile /usr/sap/DSM/SYS/profile/DSM_DVEBMGS00_ijmdsm01
INFO: Attached to Shared Memory Key 73 (size 40000000), no pool used
INFO: Connected to Monitoring Segment           segment status WARM_UP           segment started at Thu Mar 22 08:58:40 2007           segment version 20040229
INFO: DSM:000:999999 connected to DSM, host ijmdsm01, System Nr. 00, traceflag
INFO: DSM release is 700 , (kernel release 700 )
ERROR: DSM:000:CSMREG calling SALS_MS_GET_LOCAL_MS_INFO via RFC failed, can not get version of DSM. RfcRc = 2, C_CALL_FAILED</b>
INFO: SLM:000:999999 connected to SLM, host rthuas50, System Nr. 10, traceflag
INFO: SLM release is 700 , (kernel release 700 )
INFO: SLM:000:CSMREG connected to SLM, host rthuas50, System Nr. 10, traceflag   INFO: SLM release is 700 , (kernel release 700 ), CCMS version 20040229      INFO: RFC logon info for SLM:000:CSMREG can be updated at any time with -R option:        sapccmsr -R           INFO: Updated saprfc.ini in agent work directory /usr/sap/ccms/DSM_00/sapccmsr
ERROR: Registration failed: Can't get version of DSM. RfcRc = 2, C_CALL_FAILED RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO message: status: EXCEPTION C_CALL_FAILED RAISED intstat:      Mon Mar 26 13:29:10 2007   INFO: dsr: dsrlib unloaded.
...closing this logfile...
Registration of CCMS Customizing Destination
Error during registration of CCMS Customizing destination
Source system cannot be set to Unicode

Hi,
Check these notes.
641339 - RZ20: CCMS monitoring context loses client assignment
558608 - Correction: Starting/stopping LDAP Connector via CCMS
827843 - Access Alert Analysis Methods that are Defined Locally
Feel free to revert back.
--Ragu

CCMS Agent

Dear All,
I want to know how to check if the CCMS Agent is already installed in my ECC Version?
My current Version is-ECC6.0 EHP4 with single ABAP Instance.
As I heard CCMS Agent is Installed by default with this ECC Version.
Please help me out.
Thanks & Regards
Ajitabh

Hi Anil,
I am sending you the log file of the ccms agent registration status.
As you can see it is running without profile.
Can you please tell me the is it necessary to register with profile?If yes how to do it?
sapccmsr -status
INFO: CCMS agent sapccmsr working directory is /usr/sap/tmp/sapccmsr
INFO: CCMS agent sapccmsr config file is /usr/sap/tmp/sapccmsr/csmconf
INFO: Central Monitoring System is [ABC]. (found in config file)
INFO: Agent is running (actual pid file is detected)
CCMS agent running on this machine: ********
     sapccmsr without profile
     registered at central system ABC
     CCMS version 20040229, 64 bit
     Process Id    24290
     relno         7010
     patchno       32
     intno         20020600
EXITING with code 0
Thanks & Regards
Ajitabh

Error while configuring CCMS Agent

Hello Gurus,
I am trying to install CCMS agent on our BI Dev system, but it gives me below error.
Error Message -
ERROR: Cannot open Monitoring Segment 0 rtc = 245
Last reported error: [249] CCMS monitoring segment has wrong EYE CATCH: CCMS mo
nitoring segment belongs to a non-ABAP instance.
SAPCCM4X of release 7.00 is to be used only to monitor ABAP instances of kernel
release 7.00 (NW04s) or 6.40.
EXITING with code 1
Error Message -
I am trying to run the command S:\usr\sap\SID\SYS\exe\uc\NTAMD64>sapccm4x.exe -R pf=S:\usr\sap\SID\SYS\profile\profile_name
I have downloaded the file as discribed on the help.sap.com link
http://help.sap.com/saphelp_nw70/helpdata/en/ca/118110ff542640b7c86b570cc61ae3/frameset.htm
I have configured CCMS Agent on our ERP Dev system, but on BI/BW I am getting this error.
Could you guys please help me on this.
Best Regards,
Amit Vaij

Perhaps your BI system is dual stack, or even java only?
In that case you should install the sapccmsr agent (as well).
Regards,
David

Registering a CCMS Agent SAPCCMSR (Double-Stack)

Hello,
In our landscape, we are implementing the Central Monitoring System (CEN) functionality on NW2004s system.
Here are the landscape details:
F41 Instance - Dual Stack (ABAP + JAVA)
R3H - ABAP Stack
F31 - JAVA Statck
What we are trying to accomplish is, we would like to go-ahead and use the F41 ABAP instance as a Central Monitoring system.
Here is my question:
1. ABAP Instance F41 is a CEN. By default, I am able to see the F41 ABAP performance stats under ST03G transaction code.
If I want to monitor the Java Stack of instance F41, do I have to register the F41 JAVA stack using the agent SAPCCMSR?
or I should see the F41 JAVA stack stats with out making any settings/registration???
I really appreciate your response.
Thank you,
Nikee

Hi Srinikesh Cheella,
You must register the sapccmsr agent in Visual Administrator. The procedure is given on the SAP Help Portal at the following address:
http://help.sap.com/saphelp_nw2004s/helpdata/en/56/e2f74021addd50e10000000a1550b0/frameset.htm
Kind regards,
Christophe

CCMS Agent registeration issue in Satellite system

Hi
I am doing CCMS alert configuration for my ECC system. Solution Manager is the system we are using for alert monitoring and ECC is Satellite system. I have created the CSMREG user in solman system also successfully placed the generated agent file in satellite system. When I trying to register the SAPCCM4X agent, it is giving the following error :
INFO: trying to register service SAPCCM4X.00 at Windows Service Control Manager
      starttype of service:             manual/[auto] : auto
      DomainName\UserName or [<LocalSystem account>] : itlinfosys\e01adm
      password                            : ************OpenSCManager failed...
ERROR: service registration failed
HINT: Windows Service Manager may be locked.
      Close "Services" window and try again.
INFO: Updated config file D:\usr\sap\E01\DVEBMGS00\log\sapccm4x\csmconf.
EXITING with code 1
Can you please help me on this issue.
Regards,
Mounika

Hello,
When you start the command prompt do as , Start -> Programs - Accessories -> right click on Command prompt, select either Run as and give administrator user / select Run as Administrator
Regards
Jose

CCMS agent is not registered at central CCMS system

Hi,
I have standalone DB (AIX) and CI (AIX) with 4 application servers. (only Abap - unicode system)
In CI sto6 and OS07 i am not getting any info regarding DB server and also in EWR in solution manager.
I came to know that ccms agent not registered.
plz help in CI which client i want to create the user csmreg and config file.( in 000 or working client)
After creating config file in which path should i copy the config file in OS level in AIX.
and how to start it.
Please suggest me.
Thanks,
Hari

Hi,
Check below link:
http://help.sap.com/saphelp_nw04/helpdata/en/48/6a76607a7c91409474ad6c7b6f5a26/content.htm
Thanks
Sunny

CCMS Agent Issue in Central Monitoring System

Similar Messages

Maybe you are looking for