CCMS Agent registeration issue in Satellite system

Hi
I am doing CCMS alert configuration for my ECC system. Solution Manager is the system we are using for alert monitoring and ECC is Satellite system. I have created the CSMREG user in solman system also successfully placed the generated agent file in satellite system. When I trying to register the SAPCCM4X agent, it is giving the following error :
INFO: trying to register service SAPCCM4X.00 at Windows Service Control Manager
      starttype of service:             manual/[auto] : auto
      DomainName\UserName or [<LocalSystem account>] : itlinfosys\e01adm
      password                            : ************OpenSCManager failed...
ERROR: service registration failed
HINT: Windows Service Manager may be locked.
      Close "Services" window and try again.
INFO: Updated config file D:\usr\sap\E01\DVEBMGS00\log\sapccm4x\csmconf.
EXITING with code 1
Can you please help me on this issue.
Regards,
Mounika

Hello,
When you start the command prompt do as , Start -> Programs - Accessories -> right click on Command prompt, select either Run as and give administrator user / select Run as Administrator
Regards
Jose

Similar Messages

How to explain that CCMS Agent doen't effect for system perfformance ?

Hi All,
My customer worries that installation of ccms agent in their production system will be effecting overall system performance.
is that any explanation that i can use to explain that ccms agent doen't burden the production system because they have internal mechanizem to collect all the performance data.
Thank You and Best Regards
Fernand

Office 2011 Removal
Office 2011 Removal (2)
MacKeeper Removal
MacKeeper Removal

CCMS alerts of the satellite system

Copying CCMS alerts available on the satellite systems to Solution Manager. Is this functionality workable to monitor from Solution Manager?
Cheers
Roger

Yes.. Please search for the documents related to System Monitoring funcationality in SolMan. You can get a lot of documents about that in SDN. As well as seach for a .sim file for this in service.sap.com/rkt-solman.
Rajeev

Error while configuring CCMS Agent

Hello Gurus,
I am trying to install CCMS agent on our BI Dev system, but it gives me below error.
Error Message -
ERROR: Cannot open Monitoring Segment 0 rtc = 245
Last reported error: [249] CCMS monitoring segment has wrong EYE CATCH: CCMS mo
nitoring segment belongs to a non-ABAP instance.
SAPCCM4X of release 7.00 is to be used only to monitor ABAP instances of kernel
release 7.00 (NW04s) or 6.40.
EXITING with code 1
Error Message -
I am trying to run the command S:\usr\sap\SID\SYS\exe\uc\NTAMD64>sapccm4x.exe -R pf=S:\usr\sap\SID\SYS\profile\profile_name
I have downloaded the file as discribed on the help.sap.com link
http://help.sap.com/saphelp_nw70/helpdata/en/ca/118110ff542640b7c86b570cc61ae3/frameset.htm
I have configured CCMS Agent on our ERP Dev system, but on BI/BW I am getting this error.
Could you guys please help me on this.
Best Regards,
Amit Vaij

Perhaps your BI system is dual stack, or even java only?
In that case you should install the sapccmsr agent (as well).
Regards,
David

CCMS Agent Issue in Central Monitoring System

Dear Guru's,
We are configuring the CCMS Agent in our landscape, while registering the CCMS Agent we're facing some issue.
CEN system - Only ABAP Stack - ECC 6.0 Ehp3
Target System - Double stack (ABAP + JAVA, Netweaver 2004s)
After completing the Visual Admin settings. Service file SAPCCMSR.99 has
been generated automatically. As per the help.sap the service file should
be SAPCCMSR.<Instance No.>, our instance no. was 00 but its was generated
with 99 (SAPCCMSR.99).
Two RFC has been created in Double stack system and one RFC has been
created in ABAP system.
RFC in ABAP system :
SAPCCMSR.HOSTNAME.00 - its not working
(Error Details, ERROR:program hostname.sapccmsr.00 not registered)
RFC in Dual-stack System :
SAP.CCMS.J2EE.SID - its working
SAPCCMSR.HOSTNAME.00 - its not working
(Error Details, ERROR:program hostname.sapccmsr.00 not registered)
While testing the Remote System Topology, we're getting communication
error.
In RZ21, Topology - Agents for Remote Systems - Display Overview, Agent
for SAP System SID tab, Agents for Remote SAP Systems, selecting the
available system (Dual stack system) and give Test Connection means
its throwing Error opening an RFC connection - SAPCCMSR.HOSTNAME.00
Could you please suggest, what we're missing.
regards,
Guna

Hi,
Thanks for your reply.
What your said was rite, but I'm unable to get J2EE (Java Stack) alert information in RZ20 of the same system, coz., its dual stack system. If we don't have any issue in Java means it should be updated in RZ20 of the same system.
In Dual-stack System:
RZ20 -> CCMS monitor sets -> SAP J2EE Monitor Template -> All Systems -> SID -> J2EE Engines, J2EE Applications, J2EE Log files... these are not updating here.
Could you kindly suggest for above issue.
regards,
Guna

Configuration check error: The SMD Agent is not able to connect the Satellite System (J2EE stack)

Hi friends,
Getting the below error in step 10 (configuration check) in managed system configuration.
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this
System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
The SMD log file referred to in the log above gives the same information and not anything much useful.
Any idea what could be the reason for the above error?
Thanks,
Arindam

Hi All,
Thaks for your suggestions. I chcked the note 182020, but the issue described in the note is for error byte code adapter installation whcih is not my case. The byte cde adapter intallation has been successful in our solman system All the steps from 1 to 9 are green. Only in step 10, check cniguration I am getting the above error.
The logon test wth the user id in step 3 "Enter system parameters" is successful. The message server port is also correct.
Hi Khaja,
I went to the links as suggestedby you but there its about a ifferent error message "Invalid Response Code: (401) Unauthorized.". I am not getting any such kind of error.
All I am getting is this -
The SMD Agent is not able to connect the Satellite System (J2EE stack).
Please check the JAVA Connect Parameters provided in the Managed System Setup Wizard for this System.
java.rmi.RemoteException.P4 Connection failed -
P4AuthorizationException -
com.sap.smdagent.plugins.connectors.p4.exceptions.P4AuthorizationException:
Access is denied to SAP System sid [XYZ/null]: check the connection
credentials.More details about the error in agent 'xyz' log file
(SMDAgentApplication.X.log).; nested exception is:
com.sap.engine.services.security.exceptions.BaseLoginException: Cannot
authenticate the user.
Thanks,
Arindam

How to install CCMS agent in MSCS cluster system?

Hi,
We just migrated our WAS 7.0 system from a single to a MSCS cluster system and we need re-install CCMS agent on it. New cluster system have two nodes. Each node we have local SAP instances. We have central instance for message server running on a shared drive, which can failover to one of the nodes. My question is when I install CCMS agent, where I should I install it? Each node of the cluster on local drive or only shared drive or I have to install on three places?
Thanks you.
Yujun Ran

Hallo.
Did you solve your issue?
I followed Oss note 536954, but I am not sure that it is for new cluster system.
Furthermore, the CCMS agent that you installed, point to a CEN system (as Solution manager for example) and as second system to the central instance ?
Thanks.
Mario

How to log an issue in solman system through satellite system

Hi all,
Please this is very urgent.
My functional team is doing integration testing and they want that all the errors that come during testing in satellite system(in my case development system) should be logged in Solution Manager.I have already configured the solution manager systema nd registered my development system in that.Can anyone please tell me about that and how to configure this issue.
I am highly thankful to you.
Thanks
Praveen

Please follow SPRO - Service Desk Configuration
Markus

Error when registering CCMS agent SAPCCMSR on ECC 6.0 ABAP only system

I need to start the agent sapccmsr on SAP ECC 6.0 system to monitor ABAP proxies for separate MDM system.
I already have the sapccm4x agent running.
When I try to register using:
CALL PGM(<kernel_lib>/sapccmSr) PARM('-r' '-f' '/usr/sap/<sid>/<inst>/log/sapccmsr/csmconf' 'pf=/usr/sap/<sid>/SYS/profile/<inst_host>')
I get the error message:
ERROR: cannot open Config
File /usr/sap/D12/DVEBMGS12/log/sapccmsr/csmconf fo
r registration
I cannot see any issue with authorizations. I have modified the csmconf file with the appropriate passwords. The sapccmsr.install.logs are empty.
Has anyone run into this issue? Can I start the agent on an ABAP only system? If so has anyone done this successfully & have the cmd to do so?
There is probably a very simple solution to this but I just have not been able to find it!
Any information would be greatly appreciated.
Regards,
Diane Szmurlo

Hello Nish,
Have you done SGEN already?
Anyways first try this out Check through SE11 if the tables exist in the new client. For example check for A001. If it shows up there try to activate the table and see if you get any errors. Let us know the results.
Regards.
Ruchit.

Solution Manager ChaRM Issues when Upgrading Satellite System

When upgrading a satellite system that is connected to Solution Manager's Change Request Management, is there anything that we need to be aware of?
Will Change Documents still be able to go to completion (Production status) if we modify the landscape from the time the Change Document is In Development to the time it is moved to Production?
1. Normal Correction (In Development) Development (ECC 5.0) -> Quality (ECC 5.0) -> Production (ECC 5.0)
2. Landscape is changed to Development (ECC 6.0) -> Quality (ECC 6.0) -> Production (ECC 5.0)
3. Normal Correction moved to To Be Tested -> Consolidated -> Production
Will the Normal Correction be in error because the landscape changed for the iBASE?
Are there any other lessons learned that anyone has experienced with Change Request Management or Implementation during and after an upgrade?
Thank You,
Carlen
Edited by: Carlen Yuen on Jan 13, 2009 1:50 AM
Edited by: Carlen Yuen on Jan 13, 2009 1:51 AM

Thanks Subhashini!
We had issues updating the Task List in the past. After we update the landscape and refresh the project and update the Task List, do you foresee any other problems?
Are there any additional items we should look out for? For example, we understand it is a requirement to release all transports prior to beginning the upgrade. However, since the release of the transport locks the change into the cycle for the next production move, this will present a problem if the change is not yet ready to be moved into Production. Do you have any further insight to any additional issues such as this?
Thanks again!
Carlen

CCMS agent is not registered at central CCMS system

Hi,
I have standalone DB (AIX) and CI (AIX) with 4 application servers. (only Abap - unicode system)
In CI sto6 and OS07 i am not getting any info regarding DB server and also in EWR in solution manager.
I came to know that ccms agent not registered.
plz help in CI which client i want to create the user csmreg and config file.( in 000 or working client)
After creating config file in which path should i copy the config file in OS level in AIX.
and how to start it.
Please suggest me.
Thanks,
Hari

Hi,
Check below link:
http://help.sap.com/saphelp_nw04/helpdata/en/48/6a76607a7c91409474ad6c7b6f5a26/content.htm
Thanks
Sunny

CCMS agent - segment name issue

Hello,
Does anybody know where the CCMS agents get their segment name (visible in RZ21 transaction) ?
I have a problem with one of my agent that doesn't have the right segment name and it's causing a lot of other problems.
If someone has any idea on this, it would help me a lot.
Thank you very much

Rouger,
I am not sure whether i understand your issue.But anyway try these steps to register and unregister the ccms agents...Please explain next time if doesn't works.
ABAP -- sapccms4x agent
Registering the agent -
>   sapccm4x -R -f /usr/sap/SID/ccms/log/sapccm4x/csmconf pf=/sapmnt/SID/profile/SID_DVEBMGS00_hostname
starting the agent -
>   sapccm4x -DCCMS pf=/sapmnt/SID/profile/SID_DVEBMGS00_hostname
status of the agent -
>   sapccm4x -status pf=/sapmnt/SID/profile/SID_DVEBMGS00_hostname
unregistering the agent -
>   sapccm4x -U pf=/sapmnt/SID/profile/SID_DVEBMGS00_hostname
Java -- sapccmsr agent
sapccmsr -DCCMS -j2ee pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS00_hostname
sapccmsr pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS00_hostname -j2ee -initshm
( To clear shared memory )
Try this SAP Note 883361 - CCMS Agent does not start
Hope this will help you.
Thanks
Kalyan
Pls reward if answer is helpful.

Missing CCMS sub tree in satellite system

Hi,
I am setting up monitoring in Solution Manger for different SAP systems.
On one satellite system in the CCMS tree there is a branch for MaxDB Monitoring.
In another satellite system in the CCMS tree there is no branch for MaxDB Monitoring.
How can I insert the MaxDB Monitoring branch in the latter satellite system so I can copy the properties of the MTE classes to use in alerts in Solution Manager?
The SAP CCMS Monitor Templates monitor set in the satellite systems is used in the Solution Manager.
Best Regards,
Kjell Aarhus

Hi Mikael,
Thanks for your clearifying answer.
Now, in the system I have taken over, the SAP CCMS Monitor Templates have been used as source to provide Solution Manager with data. Is that an unfortunate solution? And is it possible to change that now after everything is set up?
/Kjell

System Monitoring for Satellite System in Solution Manager

Hi,
I configured satellite system in solution manager through SMSY,and i created solution in dswp.I want to configure system monitoring through ccms agent,how to install ccms agent,how to configure system monitoring for satellite system in solution manager .Please guide me.
Thanku

Hi,
In Solution manager I did below steps. :
1) Activated background dispatching in Rz21 (Client : 000).
2) Created CSMREG user (In RZ21)
3) Generated the configuration file for agent (CSMCONF).
I down loaded the ccmagent_35-20001346.sar file.
What are the steps i have to do in satellite system.
Thanku

Monitoring a non-SAP satellite system in Solution Manager

Hi Folks,
I have two quick questions.
1.) What is the proper procedure/tool for monitoring a non-NW system in Solution Manager? Should I be able to use sapccmsr and saposcol on these systems?
2.) What is the proper way to connect a non-NW system to the SLD? Should I be able to use saposol and sldreg for these?
Background:
- My Solution Manager system is a NW70 EHP1
- Solution Manager Diagnostics is installed and monitoring my ABAP and Java systems
- I have my CCMS agents registered back to my CEN for the ABAP and Java systems
Satellite systems:
- Multiple Wintel servers (both IA32 and x64) that are running;
o standalone SQL server databases
o BOE/BOBJ
o BPC for Microsoft
Section 4.8 of the Monitoring Setup Guide (CEN SAP Netweaver 7.0 SPS18) states that I should be able to monitor a standalone database.
My confusion isu2026 in the absence of an SAP filesystem (kernel) and the standard SAP environment variables that get set during an install, how do I register the agents? The executables do not want to launch.
Thank you,
Bill

Dear William,
Monitoring of NON-SAP systems is not actually done on the solution manager system itself. The solution manager system gets its feed of alert information from the satellite, specifically CCMS. For SAP systems, alerts from CCMS are set up and activated by default. For Third-Party systems you have to be ablke to set up the interface to feed monitoring information from your non-SAP software to SAP's CCMS infrastructure.
You can get more information on CCMS agents via the website at http://service.sap.com/monitoring.
Go to "system Monitoring and Alert Management" > "Monitoring in Detail".
I hope this information is helpful.
Regards,
Paul

CCMS Agent registeration issue in Satellite system

Similar Messages

Maybe you are looking for