CCMS ALERT for SCC4 t-code

Hi ,
I want to set CCMS alert in SOLMAN for t-code SCC4 in satellite system ,Please advice.
Thanks
Chander

Hi,
As far as I am aware no CCMS monitor exists for this. What you can do is to set parameter rec/client = ALL in DEFAULT.PFL this will then enable you to at least go and look who and when it was opened using report SCC -> Utilities -> Change logs
This will also only be helpful if everyone used individual and no generic user makes the changes.
Also refer to link this monitors the table where the change entries are made and changes can then in turn be alerted on.
http://scn.sap.com/thread/931751
Kind Regards,
Johan

Similar Messages

CCMS Alert for Backup DB2 on OS390

Experts
We would like to configure CCMS Alert for backup failures on the Db2 database which resides on z/OS. I have an option in RZ20 to configure , but it tell me which tablespaces needed fort the backup. it dosent tell you whether the backup is success or failed. I can see the status from the backup history in db2 t code. So how do we configure?do we really have an option to use the same.
Regards,
Mahesh Shetty

Hi,
did you check this SDN Document regarding your monitoring problem?
[SAP DB Admin Guide for DB2|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/5a6c489b-0501-0010-7ab2-80450fc6ce60?quicklink=index&overridelayout=true]
Kind regards,

CCMS Alert for J2EE in Solman

Hi All,
I need to set CCMS alert for J2EE monitoring in solman. Could any one help me in this regard. I guess for this we need to configure GRMG monitoring. Could anyone suggest how to do this.
Thanks & Regards,
Sundara.

Hello Sundara
You can setup CCMS for J2EE in the following ways
1. Setup system monitoring in DSWP as you do for ABAP systems
2. Installing and Registering sapccmsr agents
3. Availability Monitoing by GRMG Lite and GRMG
4. Setting up Central Autoreaction
5. E2E analysis (Solution Manager Diagonostic)
Four options are excellently elaborated in the following link
Setting Up your Central Monitoring [original link is broken]
and E2E
http://service.sap.com/diagnostics
If you face any problem in any of these, revert back
thanks
Bhudev

CCMS Alert for missing filesystem

Hi Experts,
We are facign an issue in transports as /usr/sap/trans mount went missing after last server reboot and did not get mounted.
For this we will have to schedule another maintenance to remount this. To avoid such scenario in future; we need to set up ccms alert so that we receive alert if any filesystem is missing. We are already getting ccms alerts for filesystem size, CPU usage etc using hostagent and saposcol.
Please help if its possible to have alert if any filesystem is not mounted. If yes; please help is proceeding in that direction
Thanks
Varun

Hi Varun,
Please check SAP help http://help.sap.com/saphelp_nw73/helpdata/en/4c/0e863be3047e19e10000000a114084/content.htm
You may look for File system monitoring option
Hope this helps.
Regards,
Deepak Kori

Restrict Authorization in SAP_ALL & SAP_NEW for SCC4 T-CODE only display

hi,
I want to restrict 'Change' mode for SCC4 T-CODE to devuser having complete authorization with profiles SAP_ALL and SAP_NEW. Only 'Display' should be allowed for SCC4. For devuser no roles are assigned.
For Other Users Roles are assigned with restriction in Authorization at "Basis: Administration-> Table Maintenance (via standard tools such as SM30)> Activity" for authorization object S_TABU_DIS only 'Display' is allowed.
Abhijit.

Jurjen Heeck wrote:>
>... something else to make a part of SAP_ALL not work?
2 ideas:
- If the regeneration of SAP_ALL could check that the user running it does not have any SAP_ALL authorizations? Meaning, they would need to know exactly which non-SAP role authorizations (their technical names) have that authority in it. Many folks who only work with SAP_ALL don't know how to do that
- If there were some way to isolate the program parts which are required to change SCC4 such that they can only be run with root priveleges, then you do not need to give your SAP system (with SAP_ALL) root access...?
Disclaimer: Just ideas! Complete overkill!!
=> Does restricting the user's access sound like a much easier idea now?
Cheers,
Julius

CCMS alert for update deactivation

Hi,
we are planning to set one CCMS alert to get upon deactivation of update in SM13. Any help would be appreciated..
Thanks
Dash

HI ,
You can use the below MTE Class "CCMS_UpdateStatusClass" and assign the autoreaction method for the same.
Please revert incase you required more details on the same.
Regards,
T.Narsimha

CCMS Alert for Stuck Queue

Hi
I want to setup alert for any ABAP Dump or any Failed XML Message.
Requirement is that it should come to me as an email like:
System:SID
Client:xxx
Text:a brief description of the Dump or XML message
I have setup CCMS and GRMG but I am receiving mails regarding GRMG Heartbeats only and not related to other CCMS alerts.
I have seen the weblogs available in the SDN.
Thanks in advance

Hello Sundara
You can setup CCMS for J2EE in the following ways
1. Setup system monitoring in DSWP as you do for ABAP systems
2. Installing and Registering sapccmsr agents
3. Availability Monitoing by GRMG Lite and GRMG
4. Setting up Central Autoreaction
5. E2E analysis (Solution Manager Diagonostic)
Four options are excellently elaborated in the following link
Setting Up your Central Monitoring [original link is broken]
and E2E
http://service.sap.com/diagnostics
If you face any problem in any of these, revert back
thanks
Bhudev

Ccms alert for RFC service

I have a simple task that i was told to monitor.
There is RFC to a remote non-sap system that is setup in SM59. This non-sap system some times stops responding. I would like to setup a CCMS alert specific to this RFC. I have tried creating all kinds of alerts and methods but have not been successful.
Does anyone have a simple steps on how I go about creating a simple alert specifically monitoring a particular RFC connection?
I have looked at sdn ccms page and help on ccms from sap help, but they have not 'helped'.

HI
For any application server with a single instance,whenever it would stop working, would mean that the message server has gone down.In such a case, how is a system suppose to respond?
Do correct me if I am wrong here.
Regards
Chen

CCMS Alerts for MDM 7.1 distribution folder solman 7.01

Hi All,
I want to configure the alerts for the number of files present in distribution folder of MDM. In our landscape the no. of files in distribution folder are in lakhs Is it possible system will trigger an alert when it grows to 50K?
Please help experts.
Regards,
Ankit

Hi Ankit,
Yes, this can be done. But for that you have use a script, schedule in cron with 10 mins daily, which will count the number of file and save it log file with some KEYWORD.
For eg, if the number of file are more than 50 then the log file will contain a message, "warning".
Now, as soon as agent finds this message in this file, an auto reaction method will be triggered and emails can be sent for notification.
You can refer below link for more information.
535199 - CCMS agents: Monitoring log files
https://help.sap.com/saphelp_nw04s/helpdata/en/65/f3156d443e744abe15dbe14e4e32b5/content.htm
Regards,
Divyanshu

Central CCMS Alert for Java instance server node crash

Hi,
Is it possible to trigger an alert of an Java system server node crash using central CCMS alerts.
J2EE instance CCMS alert does show some MTEs, however they do not trigger alerts. I got this info from below link
http://help.sap.com/saphelp_nwce711/helpdata/en/46/11aaf352da14dce10000000a155369/frameset.htm
Any idea how to trigger the alert for server node crash.
I understand that server node crash should be investigated for permanent fix, however we need this as a proactive measure to know the crash if they happen.
Thanks
Imtiaz

Hi Imtiaz,
Do you see any error on the view>status auto-reaction? Have you been able to assign an auto-reaction to this MTE?
Cheers,
Maurício

CCMS alert for Bckground Job

Dear Experts,
I need to configure mail alert through solman for failed backgrougnd job in R/3 system. Please can anyone share configuration guide.
Regards,
Sampath

Hi Sampath,
please visit http://service.sap.com/solutionmanagerbp. There you'll find a link to the Best Practice document "Background Job Monitoring with SAP Solution Manager" (number 064). The document is mainly about job monitoring as part of Business Process Monitoring (which I would actually recommend). Nevertheless at the beginning of the document also the CCMS job monitoring is briefly explained.
Best Regards
Volker

Configuring CCMS alerts for Availablity Monitoring

Hi All,
We are in the process of configuring availablity monitoring in central system (solution Manager 7.0 with SP stack 23) to monitor all systems (ABAP,Java,Dual Stack, Trex,DMS,etc) in landscape.
As a first step, we have registered CCMS agents in monitored (ABAP) system and connected to central system (Solman)
All the required RFCu2019s have been defined for data transfer between monitored and central system
In RZ20,i could see the availablity as 100% for the defined moniored system under SAP CCMS Technical Expert Monitors>All Contexts on Local Application Server>CCMS self monitoring >CCMS agents>CCMSPING.hostname
Not sure whether above path is the place where in we look for alerts
Please clarify the below points
i) how to configure the email alerts (in RZ20) from the central system when monitored system is down
ii) the path in which I can find the alerts in RZ20 for that monitored system or how to add the monitored system incase if that doesnt exists
iii) MTE class under which analysis, auto reaction method to be assigned ?
iv). data collection method and frequency
v). Which MTE class to be used to assign the Autoreaction method (CCMS_test_mail alredy defined)
Appreciate your quick response on this
Thanks,
vadi

Hi All,
Thanks a lot for your reply.
Still i m having an issue in handling the RZ20 alerts managemnent
In RZ20,
i) i able to see the added monitoried system id under the node CCMS Monitor templates>Availablity & performance overview>Availablity-->monitored sys id
ii) When i click on open staus for the above node turns to green color
ii) when i click on current status the node turns to grey color
I am not sure whether the data collection is being passed since it doesnt turn red when the system is down
However the dispatching jobs are active in both CEN and monitored (000 client) systems
Appreciate your response
Thanks,
Vadi

CCMS - Alert for Email-Errors in the SOST

Hello everybody,
is there a way to set an Alert in the CCMS for checking Email sent with errors from the transaction SOST?
We´ve also connected an externe Fax Programm: this service is build over a RFC and functions successfully. We´d like to check all faxes with errors in the CCMS Monitoring, too.
In our SCOT the Node for the SAPConnect was already activated:
- Utilities - Alert Monitoring - Start Data Collection Method:
Data collection method for SAPconnect ran with no errors.
Now i can see it:
- Utilities - Alert Monitoring - Display - SAPConnect.
Into my custom Monitor i´ve put a MTE SAPconnect node, with name:
- ACTIVE
RFC system error: Function SMON_COMP_STATE_RETRIEVE is not available
What does this error mean? How can i easy configure the monitoring of the SOST?
Do i have to create a custom or is there any method which i can use as analyse method for the checks of the sapconnect?
PS: the same error appears also if as test i send one fax to a false address: this isn´t the error that i expected to receive.
Please on reply.
Thanks as alwalys.
Alberto

Hi Gagan,
thanks for the reply, i had already seen this link in internet but i´d like to know if there´s a way which use only the standard methods in the CCMS, without changes in any programs.
Not implemented Steps: B, E (autoreaction method not needed for this alert at the moment), F.
I have also created a analyse method with name SOST and assigned to the node.
But after starting the Data collection method for SAPconnect i see in CCMS the alert error:
RFC system error: Function SMON_COMP_STATE_RETRIEVE is not available
I didn´t send any fax or email yet, i´m still by the the configuration...
Where does this error come from?
Thanks.
Alberto

CCMS Alerts in PI 7.1 for adapter engine

Hi Experts,
Looking for a step by step process to configure CCMS alerts for adapter engine in PI 7.1

Hi Shweta,
>>>Looking for a step by step process to configure CCMS alerts.
Please see the belog blogs, it might be helpful to you.
Part u2013 1:
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
Part - 2:
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
Part - 3:
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Regards,
P.Rajesh
Edited by: Rajesh_1113 on Mar 22, 2011 12:58 PM

Problem with the mail generation for the CCMS alert

HI ,
I have created CCMS alert for the RFCdestination in the system and is working fine, and now i would like to configure mail for the same alert for that i have did the following
1.copied the method CCMS_ONALERT_EMAIL_v2 in RZ21 and created the new method .
2. And then assigned the same in the CCMS alert in the autoreaction tab.
But still iam unable to generate mails.Mail configutation is ok and am able send mails to external addresses.
Can any one please let me know if iam missing anything and guide me .
Any help is appreciated

Hi Vamsi,
Please check below thread and go through suggested documentation.
Automatic Email for CCMS Alerts
Revert for any queries.
Regards,
Rajesh

CCMS ALERT for SCC4 t-code

Similar Messages

Maybe you are looking for