CCMS - Alert Monitoring

Dear All,
I have just installed IDES 4.7 Release SR 2.0
Now I want to configure Alert Monitoring using RZ20. Can you please explain step by step as I am new person in the CCMS area.
Thanks in advance
LK

Hi,
Please check this link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c8ecb690-0201-0010-4e88-f8f56d2b8d65
With Regards,
Saurabh

Similar Messages

XI Alert Categories in CCMS alert monitor

We defined an alert category through ALRTCATDEF and we generate alerts using SALRT_CREATE_LOCAL in the Graphical and Java mapping. We would like these alerts to be visible in CCMS alert monitor in addition to XI alert inbox. We have done config specified in the SAP documentation to get the RWB alerts in CCMS alert monitor, but only the alert categories for which alert rules are defined in RWB are visible, at the moment. IS this because we dont have an alert rule for the alert categories called by SALRT_CREATE_LOCAL,we are not able to see them in CCMS? Is there a way to get around this problem and get these alerts also in the CCMS ?

HI,
See the below links may be helpful..
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 -- ccms alerts - 1
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 -- ccms alerts -- 2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 -- ccms alerts --- 3
Regards
Chilla

CCMS Alert Monitor (edit monitor-configuration.xml. ?)

Hi Friends
I'm trying to change the default polling time for the CCMS Alert Monitor, 5 minutes instead of 30 minutes.
In http://help.sap.com/saphelp_nwpi71/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/content.htm you can read:
Accuracy
The default polling period for the monitor is 30 minutes. If you want to have shorter polling periods, you can change them in the SAP NetWeaver Administrator as follows:
1. Choose Availability and Performance Management ® Resource Monitoring ® Java System Reports (alias: /nwa/java-sys-reports).
2. Select an arbitrary Number of errors entry in the monitoring tree of the Adapter Engine (leaf node).
3. Choose Configuration in the right-hand pane.
4. Choose Edit in the dialog box that appears.
5. Change the polling period to 5 minutes, for instance.
6. Choose Save and wait until saving is finished (be patient, since this may take a while).
7. Choose Configuration Management ® Infrastructure Management ® Java Configuration Browser.
8. Choose apps ® sap.com ® com.sap.aii.af.app ® Monitoring Configurator ® monitor-configuration.xml.
9. In the xml file, change the polled-by-template period to the same value as above, for example, 5 minutes.
10. Save the modified xml file.
11. Choose Operations Management ® Infrastructure Management ® Start & Stop ® Java EE Services to restart the Monitoring service to apply the changes.
But in step 9, the xml file I've found in my PI 7.1 (SP6) is this:
<monitor-configuration>
<monitor-semantics />
<monitor-tree />
</monitor-configuration>
Also, there is no way to modify that file, you can only display it or download it.
can anyone tell me how to edit the file.
regards
raja

Hi Raja,
This is the same as doing the following:
You can locate the monitor-configuration.xml file in the SDA com.sap.aii.af.app.sda (inside META-INF folder). You can find this SDA in the install directory of PI installation. In this XML file please locate and edit the following tag:
<template-info template-name="SAP_XIJ2EE_RCRDS">
                        <polled-by-template period="30" unit="MINUTE">
                            <generating-resource
                                name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
                            <template-attribute-mapping>
                                <invoked-resource-method name="getMonitoringRecords"/>
                            </template-attribute-mapping>
                        </polled-by-template>
                    </template-info>
Change the above to the following *************
<template-info template-name="SAP_XIJ2EE_RCRDS">
                        <polled-by-template period="5" unit="MINUTE">
                            <generating-resource
                                name="com.sap.aii.utilxi.rtcheck.mx.standard.XIJ2EEComponentMBean" type="APPLICATION"/>
                            <template-attribute-mapping>
                                <invoked-resource-method name="getMonitoringRecords"/>
                            </template-attribute-mapping>
                        </polled-by-template>
                    </template-info>
The main change is the polled-by-template value from 30 mins to 5 mins as per your req ******
Construct back the SDA (you can search SDN for that) with this edited XML and then redeploy this SDA with the help of JSPM tool.
This will re-start the PI Server for the changes to come into effect.
I hope this helps.
PS: You can consult your BASIS consultant to locate this sda and re-deploy it on PI Server.
Regards, Gaurav.

CCMS - Alert monitor configuration

Hi
We are configuring the CCMS Alert monitor for monitoring the R/3 systems. We are referring sap help and sap notes, but also we are looking for document which instructs the complete configuration, will be appreciated if share the same.
regards,
rajesh

Hi rajesh,
Have you checked the iTutor files in
http://service.sap.com/rkt --> SAP Solution Manager 4.0 --> Technology Consultants and System Administr
These are really good documents with step by step instuctions and screen
Thanks
Prince Jose

CCMS Alert Monitor

Hi guys,
is the alert monitor (RZ20) used
to configure email so as to alert
if a PC error occurs, does it
work as a central hub of monitoring?
Thanks,
Due points will be assigned

Hi Vijay,
RZ20 Tcode is used for CCMS maintanence.
and to configure mails to alert you to know any errors in PC is done through setting up distributionlist in SO23, and create message using context menu from the process type in PC.
Check your mailbox and you a good document on this...
Hope it helps...
Best Regards,
DMK
*Assign points if it helps...

CCMS alert monitoring data for ORACLE is not visible in Central system

Hello,
I have installed sapccm4x agents in the CI of the Satellite System and it shows in the Central System as sucessfully registered under Agents for remote System and the RFC Connection test is also successfull. When i check in RZ20 in Central System not all the predefined monitors are visible of the Satellite System in the Central System and mainly the MTE element ORACLE. The database,CI and other instances on the Satellite System are installed on separate hardware. As said the database is installed not with the CI but a standalone.
Please let us know what needs to be configured in order to get the MTE element of ORACLE to show in the Central System.
Thanks,
Vinod Meno

Bhudev,
Thanks for the quick respose..
1.Sapccmsr agent is installed on Java standalone server and it has been sucessfully registered and running and we can grep the process to see its state as well as in the Central System i can see under ccms agents for remote systems it shows and the RFC connection test is also sucessfull.
2.Yes we are sending the data from the DB to CI first,but we also want the data visible in the Central System mainly for the MTE element Oracle.The filesystem of the Satellite Systems shows up in the Central System but i am intrested to capture the MTE element Oracle since we plan to monitor the tablespaces threhold .
I am thinking of opening an SAP message but i am trying to see if i can get some info that can give me the result.
Regards,
Vinod Menon

CCMS alert on XI interface monitoring : Error status of XML Messages

Hello Everyone,
Please can anyone let me know on how we can setup ccms alert monitoring on tcode: SXMB_MONI for XML messages which are in error status. Do we have any MTE class available in XI system ?
Please share your expertise on this ..
thank you !
Regards,
Tushar Rathi
Edited by: Tushar Rathi on Mar 23, 2011 9:24 AM

Hello Everyone,
Please can anyone let me know on how we can setup ccms alert monitoring on tcode: SXMB_MONI for XML messages which are in error status. Do we have any MTE class available in XI system ?
Please share your expertise on this ..
thank you !
Regards,
Tushar Rathi
Edited by: Tushar Rathi on Mar 23, 2011 9:24 AM

CCMS Alert

Hi all,
i want to know what is ccms alert monitor what is the use of it
Regards,
Ravi

Ravi
you should read, can't be explained so generic question
http://allian.uclv.net/saphelp/helpdata/EN/c4/3a7d94505211d189550000e829fbbd/content.htm

Unable to configure CCMS alerts

Hi All,
I'm trying to configure alerts in RZ20.
e.g. whenever there is an error in Mapping (EXCEPTION_DURING_EXECUTE), I can see the alerts in rz20, but I cannot trigger an alert to Alert Inbox.
I tried to follow the following weblog:
/people/sap.user72/blog/2005/03/03/alert-management--use-it-in-ccms-to-shorten-response-times-for-business-critical-situaltions
But it's not working.
Any help?
Regards,
Puloma.

Hi Puloma,
Please check these..
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/dirk.jenrich/blog/2006/06/28/event-log-monitoring-using-ccms-agents
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
http://help.sap.com/saphelp_nw2004s/helpdata/en/f0/04983c6e577546e10000000a11405a/frameset.htm
cheers,
Prashanth
P.S Please mark helpful answers

Alert Monitoring and Notification Mails

I have a requirement to configure CCMS in XI system in such a way that the alerts trigger mails to the outlook users.
This is required in J2EE engine also.
Please tell the T-Codes and Steps.
Thanks

Hi Asad,
When your CCMS is not configured you can only do individual monitoring.
To configure the same you must decide which system is to be the central system for the SCR.
To know what SCR is and to know more about it please go through this link.
https://help.sap.com/saphelp_nw04s/helpdata/en/1e/ec9e38f0d92936e10000009b38f8cf/content.htm
After doing the same please follow these steps.
Log on to the system that is to contain the central repository.
- Choose CCMS ® Configuration ® Alert Monitor, or call transaction RZ21.
- Choose Technical Infrastructure ® System Repository ® Set Repository Role.
- The system displays the Set Repository Role in Central System Administration screen. Choose Central Repository.
And also go through the following links. This I guess will help you solve your problem and I guess it answers your question.
https://help.sap.com/saphelp_nw04s/helpdata/en/e5/15a0380d134f6fe10000009b38f8cf/content.htm
/people/sap.india5/blog/2005/12/06/xi-ccms-alert-monitoring-overview-and-features
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Regards,
Abhy
PS: Award points for helpful answers.

CCMS IDOC Monitoring

HI All,
I've configured CCMS alert monitoring for IDOCs and Batch job failures. In case of any IDOC failures, in CCMS tree it just shows that there is an alert with description "Outbound: Error in IDoc interface". But it doesn't shows the details of the IDOC failure means complete Status record of the IDOC. Is it possible to display detail level IDOC display in CCMS.
with Regards

Check it via BDMO - usually Computing Center Management System (CCMS) will have Test option which may give you the detailed view of IDOC(error).
Thanks!

TMS - CCMS Alert domain doesn't appear

On my training system when I go into STMS, then CCMS Alert Monitor,(The "Bell" icon") the domain doesn't appear under change and transport system. It also won't allow me to create it in rz20. I've tried redistributing and activating the stms configuration and it still won't appear. Ideas?
Thanks,
Daniel

Your Problem is not with STMS configuration.
Based on what you have explained i am thinking because of the system copy you have performed the MTE classes of target system have been over written from source system (of your system copy)
But it is not a big deal to bring the MTE classes again.Below is the procedure.
Logon to the Solman - RZ21 --> Configure Central reaction ---> Assign Central reaction
Under System ID - Select SID of your satelite System --> +MTE Class from the system.
Once you do that you should get following message ### MTE Classes were collected by <Satellite System>
Hope this helps

CCMS alert notification - sending an SMS on a mobile number.

Hi,
We have set up central CCMS alert monitoring for the systems in our landscape.
Now we want an auto reaction method which can send an SMS to a specific mobile number.
Can it be done using any existing auto reaction method or we need to develop a program in ABAP
specifically to achive this functionality ... ?
We want some reaction method which can respond to the color change in the CCMS alert monitoring attributes .
For eg - as soon as the color value in the alert is set as red , the sms should be triggered.
has anyone achieved this type of functionality .
It would be realy helpful.
Thanks in advance.
Regards
Prince .

SAP Alert Management (ALM) functionality comes into play when business-critical problems occur. Within ALM, conditions for critical situations are predefined. When an alert is triggered in ALM that meets these conditions, responsible or interested parties are determined and informed immediately you need to configure SCOT accrodingly. please check this link:http://help.sap.com/saphelp_nw2004s/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
Scenario 1)
As of Release 6.20, you can send and receive fax and SMS or paging messages using SMTP. These are packed in e-mails for this purpose. please check Note 455140 - Configuration of e-mail, fax, paging or SMS using SMTP
Scenario 2)
Starting with the SAP Web Application Server 6.20, it is possible to transfer pager and SMS messages via HTTP to a third-party software or to a pager/SMS service provider please check Note 455142 - SAPconnect: Configuration paging/SMS via HTTP.
Note 455127 - E-mail (SMTP) in different SAP releases
Note 455129 - Paging/SMS in different SAP releases
Thank you,
Shyam

Configuring CCMS alerts for Availablity Monitoring

Hi All,
We are in the process of configuring availablity monitoring in central system (solution Manager 7.0 with SP stack 23) to monitor all systems (ABAP,Java,Dual Stack, Trex,DMS,etc) in landscape.
As a first step, we have registered CCMS agents in monitored (ABAP) system and connected to central system (Solman)
All the required RFCu2019s have been defined for data transfer between monitored and central system
In RZ20,i could see the availablity as 100% for the defined moniored system under SAP CCMS Technical Expert Monitors>All Contexts on Local Application Server>CCMS self monitoring >CCMS agents>CCMSPING.hostname
Not sure whether above path is the place where in we look for alerts
Please clarify the below points
i) how to configure the email alerts (in RZ20) from the central system when monitored system is down
ii) the path in which I can find the alerts in RZ20 for that monitored system or how to add the monitored system incase if that doesnt exists
iii) MTE class under which analysis, auto reaction method to be assigned ?
iv). data collection method and frequency
v). Which MTE class to be used to assign the Autoreaction method (CCMS_test_mail alredy defined)
Appreciate your quick response on this
Thanks,
vadi

Hi All,
Thanks a lot for your reply.
Still i m having an issue in handling the RZ20 alerts managemnent
In RZ20,
i) i able to see the added monitoried system id under the node CCMS Monitor templates>Availablity & performance overview>Availablity-->monitored sys id
ii) When i click on open staus for the above node turns to green color
ii) when i click on current status the node turns to grey color
I am not sure whether the data collection is being passed since it doesnt turn red when the system is down
However the dispatching jobs are active in both CEN and monitored (000 client) systems
Appreciate your response
Thanks,
Vadi

CCMS agents, alert monitoring, SNMP traps

Hi Guys,
I have a question. There is a requirement about monitoring. Any documenation or links will be really appreciated.
My client needs me to use CCMS agents, alert monitoring for both ABAP and JAVA stacks, SNMP traps, sending SNMP traps, interface CCMS with third party monitoring tools. Mostly, the ,monitoring is done thru RZ20.
Anybody can point me in right direction or material.
Thanks
Venky

Hi,
Check these CCMS Weblogs. Really good ones...
/people/federico.babelis2/blog/2006/04/26/ccms-rule-based-monitors-configuration-guide-for-dummies
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Feel free to revert back.
--Ragu

CCMS - Alert Monitoring

Similar Messages

Maybe you are looking for