CCMS Alerts keep coming for the system which was removed from System Monito
Hello SOLMAN Experts,
Iu2019ve noticed quite strange behavior of my SOLMAN CCMS Alerts: CCMS Alerts keep coming for the system which was removed from the System Monitoring.
Have you ever experienced this?
Please advice
Thank you
123
Hi 123,
Please ensure that autoreaction methods are deleted for those systems.
You can verify system to autoreaction method assigments via RZ21 --> Technical Infrastructure --> Configure Central system -->Assign Central Autoreaction
also check if that system is appearing as online as follows
RZ21-> Topology --> system overview --> Monitored and Remote SAP systems
if yes , make it offline to stop triggering alerts.
I hope this information will help you.
Thanks,
Rupali
Similar Messages
-
Is it possible to create a customs declaration for the document which is cleraed from customs
Hi Experts,
I want to generate a custom declaration for the declaration which is cleared from customs.
Is there any function module for this requirement.
Please post your suggestions ASAP.
Thanks
Srinivashi Srinivas,
It’s not possible to create a new declaration for a declaration that is
already accepted by customs. There could be below 2 possible options
1. U need inbound cancellation messages in the respective activity sequence,
and then u can request customs by mail or phone to send the cancellation
message. Once the cancellation message is received document gets cancelled and
u can create new declaration
2. U need a new optional activity sequence that will have outbound
cancellation message. once u trigger the cancellation message, customs will
reply back with the cancellation confirmation message and u can create a new
declaration
Hope this helps...
Regards,
Santosh -
Is it possible to know when the sim card was removed from iPhone after been stolen?
My iphone got stolen and I could see that my ipad got trouble with itunes and icloud. Is it possible to know when the sim card was removed from iphone?
no,
-
The only user was removed from Administrators Group
Hi Experts
We are using Office 365 based Project Online and Project Server Security Mode was applied, also the Active Directory sync was switched to 'OFF' for Administrators Group in PWA. There was only one user which was in the Administrators Group and hence was the
lone user to have access to Project Server 'Groups & Categories' section.
Now I do not know how it happened, but the person logged into the PWA Site, went to Administrators Group and removed his name from the Group and clicked on Save.
As soon as it happened the access right were removed from that user also Now no one has the access to 'Server Settings' page as an administrator. Hence all the admin work is stopped.
My concern was is it possible that by any means can we add any user (or the same user) to the Administrator Group?
Thanks
ManishHello,
If no user has access to do this then the only option you have via the UI is to switch permission modes (to the SharePoint permission mode then back to the Project Server permission mode - this add the Company Administrators (global admins) the Admin group).
Do bear in mind this will remove all of the users from the security groups and reset ALL security so probably not an ideal option. The only other option is to open a support query via your Office 365 tenant and see what Microsoft suggest..
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS |
MVP | Downloads -
CCMS alert monitoring data for ORACLE is not visible in Central system
Hello,
I have installed sapccm4x agents in the CI of the Satellite System and it shows in the Central System as sucessfully registered under Agents for remote System and the RFC Connection test is also successfull. When i check in RZ20 in Central System not all the predefined monitors are visible of the Satellite System in the Central System and mainly the MTE element ORACLE. The database,CI and other instances on the Satellite System are installed on separate hardware. As said the database is installed not with the CI but a standalone.
Please let us know what needs to be configured in order to get the MTE element of ORACLE to show in the Central System.
Thanks,
Vinod MenoBhudev,
Thanks for the quick respose..
1.Sapccmsr agent is installed on Java standalone server and it has been sucessfully registered and running and we can grep the process to see its state as well as in the Central System i can see under ccms agents for remote systems it shows and the RFC connection test is also sucessfull.
2.Yes we are sending the data from the DB to CI first,but we also want the data visible in the Central System mainly for the MTE element Oracle.The filesystem of the Satellite Systems shows up in the Central System but i am intrested to capture the MTE element Oracle since we plan to monitor the tablespaces threhold .
I am thinking of opening an SAP message but i am trying to see if i can get some info that can give me the result.
Regards,
Vinod Menon -
Application which was removed from MacBook Pro Dock will not open. Why?
I dragged the Photoshop Elements (PSE) 11 Editor icon from the Dock on my MacBook Pro (Mavericks) because I had recently installed PSE 13. I still wanted to keep the version 11 Editor but not in the Dock. It dissolved in a puff of smoke as expected. When I went to Launchpad and the Applications folder in the Dock, PSE 11 Editor would not open. There was a question mark over PSE 11 Editor icon in Launchpad. The error message was that there were parts missing and I should reinstall it. When I go to Finder > Applications and click on PSE 11, where the icon used to be is a blank icon. It is named "Alias." When I click on the icon, the error message is "The operation can't be completed because the original item for "Adobe Photoshop Element 11" can't be found." I then when back to Launchpad and opened the PSE 11 Organizer icon. After it opened it, I opened the PSE 11 Editor from the Organizer. The Editor was fine and was functional. I then saved it to the Dock. I went back to Finder and the PSE 11 Editor is still not available. What the heck is going on??? I would like to be able to remove Apps from the Dock and still be able to open them from Launchpad or the Applications Folder. HELP!
Thanks, Bob"The PSE 11 Editor I restored to the Dock from PSE 11 Organizer today works also."
Yes, sometimes that's all it takes. It's usually a matter of finding the original application nor the alias.
I'm still suspicious of Adobe since they seem to be going the way of Microsoft. If you muck about w/ the folders the application often stops working:
"___ __ cannot open because elements are missing from the application folder". -
Hey guys,
I am pretty sure, my subject is kinda confusing. Sorry about that. Here is what happened.
1. 4510r with Supervisor V 1000BaseX, switched over to standby Sup, then reseated Active SUP, once reseat complete, switched again to get the reseated SUP up and running as Active SUP.
2. a simple maintenance which was supposed to cause no outage and it did not cause any outage as well.
3. however, what i did not notice was, even though the voice vlan was configured to access 2353, they were accessing vlan 453.
4. the change was made 2 weeks prior to this maintenance where voice vlans were previously accessing 453 and they were all changed to access 2353. configs were saved.
5. however, after the maintenance, the running config showed that they were acessing 2353 but when checking the mac address on the interface, it was seen accessing 453.
6. the fix was to remove the config and re add it , that fixed it.
Has anyone else experienced the issue ? What really happened there ?
software version: Version 15.0(2)SG5
#sh module
Chassis Type : WS-C4510R
Power consumed by backplane : 40 Watts
Mod Ports Card Type Model
---+-----+--------------------------------------+------------------+-----------
1 2 Supervisor V 1000BaseX (GBIC) WS-X4516
2 2 Supervisor V 1000BaseX (GBIC) WS-X4516
3 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V
5 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V
6 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V
7 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V
8 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45V
9 48 10/100/1000BaseT (RJ45)V, Cisco/IEEE WS-X4548-GB-RJ45Vconfigs were saved many times prior to the maintenance. i did a " write mem ".
-
while operating my iPad 2 it keeps asking for icloud.com password which I do not remember. Caption keeps coming on the screen. Very frustating.
Hello monanikhil,
Welcome to Apple Support Communities.
It sounds like you’ve forgotten your Apple ID password, which your iPad is prompting you to enter. The article linked below outlines both the process and options for resetting your Apple ID password.
If you forgot your Apple ID password - Apple Support
Cheers,
-Jason -
When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)
Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e -
On my iphone 5 i have two iTunes ID, one is no longer in use, but keeps asking for a password which I no longer have, whilst the other is still being used. How do I delete the old ID?
Hello steveod2
The main thing to do is to sign out all services on your iPhone, like iCloud, iTunes & App Store, iMessage and FaceTIme. Check out the article below for more information.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G. -
can not sign in to Icloud it keeps coming up the maximum number of free accounts have been activated on this ipad 1st generation
Error Message: "Cannot sign in. The maximum number of free accounts have been activated on this ipad/iphone"
I encountered the same problem when I purchased a used iPad for my elderly father and couldn't set it up for him. I called Apple Support...
Apple support could NOT help me. I was told there is no way to circumvent the 3 icloud setup limit on iOS devices at their end. I was told to use a different mac or iOS device that hadn't met the 3 x limit.
So, using MY iPad I tried to do that. At first I went to Settings/iCloud. But that is your PRIMARY iCloud account (and this was MY iPad and I didn't want to screw up my own settings!) which you don't want to trash.
After some online research (iMore to be exact) I discovered you can setup a secondary iCloud account using:
Settings/Mail,Contact,Calendars --> Add Acount... -->iCloud --> Get A Free AppleID --> Birthday Q then Security Question - then Name - then Get a free iCloud email address....
After you get to the new iCloud settings page at the end of the signup process - I deselected all the tabs which made the new account "inactive" on my iPad.
Next I went to the used iPad that had the initial problems, and tapped on Settings/iCloud. I signed in with the iCloud account that was newly created and was able to then get an iCloud account to work!
I left the new iCloud account showing on my own iPad (under Mail,Contacts,Calendars) as it is inactive. I am not sure what would happen if I deleted it - it may stop working on my father's iPad then. -
trying to rent or purchase a movie. System keeps asking for my password (which I check everytime to be correct) but you keep asking for it. Sometimes it happens and some times not.
Please note that you are addressing a user forum and not apple themselves.
Honestly, from experience however, if it asks you for the password again, the previous one was likely incorrect. Maybe a typo... -
I need the Log Report for the Data which i am uploading from SAP R/3.
Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nileshHi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob -
Hi, I need help and advice. Basically me and my ex partner both had iphones and synced it with the same computer under the same ID. We split up and now im trying to get all my apps and info onto my new laptop with a new account but it keeps asking me for the old apple ID which she is still using and she changed the password. i tried backing it up but still nohing. When i try to back up purchased items being apps etc its keeps asking for the old one. help
See Recover your iTunes library from your iPod or iOS device. But you'll still need the password.
Once you have the computer authorized to use the account she could change the password again to stop you buying apps on her card (assuming it's not on yours!). It would lock you out of upgrading them too but they should work unless she uses the deathorize all feature.
It depends on how amicable the split is...
tt2 -
I know there are loads of posts with same issue and most of them were related to proxy and connectivity .
This was case for me as well (few months back). Now the same error is back. But I've confirmed that FW ports and proxy are fine this time around.
server is configured on http port 80
ERROR
Sync failed: UssCommunicationError: WebException: The underlying connection was closed: Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid
according to the validation procedure.~~at System.Web.Services.Protocols.WebClientProtocol.GetWebResponse(WebRequest request). Source: Microsoft.SystemsManagementServer.SoftwareUpdatesManagement.WSyncAction.WSyncAction.SyncWSUS
I've checked proxy server connectivity. I'm able browse following site from WSUS server
http://catalog.update.microsoft.com/v7/site/Home.aspx?sku=wsus&version=3.2.7600.226&protocol=1.8
I did telnet proxy server on the particular port (8080) and that is also fine.
I've doubt on certificates, any idea which are the certificates which we need to look? And if certificate is expired then (my guess) we won't be able open the above mentioned windows update catalog site?
Any tips appreciated !
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCMHi Lawrence ! - Many thanks for looking into this thread and replying. Appreciate your help.
Your reply ("SSL is enabled/configured, and the certificate being used is invalid
(or the cert does not exist or cannot be obtained), or the SSL connection could not be established.") is very helpful.
I've already tested CONTENT DOWNLOAD and it's working fine. WSUS Sync was also working fine for years with proxy server configured on port (8080) and WSUS server on port 80.
My Guess (this is my best guess ;)) is this something to do with Firewall or Proxy side configuration rather than WSUS. However, I'm not finding a way to prove this to proxy/firewall team. From their perspective all the required port communication open and
proxy server is also reachable. More over we're able to access internet (Microsoft Update Catalog site) over same port (8080).
Any other hints where I can prove them it's a sure shot problem from their side.
Thanks again !!
Anoop C Nair (My Blog www.AnoopCNair.com)
- Twitter @anoopmannur -
FaceBook Forum For SCCM
Maybe you are looking for
-
[Mac OS X 10.4.9] Server Admin Can NOT manage localhost
a.t.t first i delete the X509Anchors And X509Certificates then i found that SERVER ADMIN app Cannot Manage the LOCALHOST it said: ========== There is no server available at the address ou entered All services failed to aceess the address you provides
-
MPG movies, can they play on an iPhone???
I have several movies that are in MPG format. I cannot load these onto my iPhone. Do they have to be in a different format? What formats actually will play on the iPhone. Is there a way to convert mpg files to a compatible format?
-
Need to increase the Time out parameter for executing BI queries
Folks, We are publishing BI Query on portal , we are getting Time out error while executing the quries , please let me know how to increment the time out parameter Thanks Manish
-
If i install the Crystal Reports Server on server machine
i have CR XI R2 edition ,if i intigrate with VS.Net will i be using VS Designer or crystal reports designer Edited by: kolahalam kathyaini on Nov 25, 2008 12:04 PM
-
Controlled messages send from WLC to Syslog
Customer' WLC4402 S/W is 4.1.0171 they do not uncontrolled messages send to their Syslog.I already set messages log level=critical failure, but uncontrolled messages is still received on the Syslog.