CCMS and DB2

Dear community,
I connected a system via CCMS Agent against or Solution Manager and wanted to configure RZ20 but I cannot see any data delivered for MTE Node Space Management on DB2. What can be the reason? Is there additional doing necessary? I don't have experience with DB2 because I'm a Oracle-Guy and there it works well after connecting a system.

Hey thanks for answering. That's right I embedded these MTE-Classes in my custom monitor set but here and in the standard templates all MTE's are grey. The data is missing. What I don't know is if there's maybe an collecting method that I have to activate before.

Similar Messages

Best Practice to Setup an application to work with both oracle and db2 db

Hi,
We have an application that currently supports both oracle and db2 databases . It is currently using JPA with eclipselink as backend mechanism and we want to move to ADFBc as our backend . So what is best practice to do this?
I came across an old post in https://groups.google.com/forum/#!topic/adf-methodology/UlJZSTu14Io that states to create two different model projects to support oracle and db2 .
Is this still the standard ? Is there a way that we could work around rather than creating multiple projects?
How do i get the view controller to work with multiple model projects if this is the case?
Thank you.

Thanks for the response .
The problem is i would have the same schema on both the databases (both in oracle and db2) .
I don't see a scenario where i want both the application model projects at the same time . What i meant is , Application will either be deployed with Oracle DB or DB2 but not with both on a production environment .
So is there a way where i just change the connection parameters alone rather having two different models ?
If i have to use two model projects , would it be possible say i built the view controller for Oracle , and use it for DB2 if i make sure the BC objects names are similar between model projects and switch just the model jar based on the deployment environment ?
-Sam

Installation on AIX and Db2 9

Hi,
I am due to start an upgrade project for 4.7 on AIX and DB2, the originating release of DB2 is 8.2.
But to save myself time I want to use the export of the SAP system to install it on a DB2 version 9 system, using SAPInst.
I know this is a valid operation on a Windows Oracle platform, but was wondering if there any limitations on the DB2 side of things.
TIA
Chris

That does not accomplish anything of what I wanted.
To reduce the complexity of the upgrade, I want to use the import process to facilitate a database upgrade.
What you are proposing is a system copy, and means I will have to do a database upgrade later.
If my idea is not workable then fine, I will do it that way but you have not addressed any of the requirements I have stated in my post.
Thanks
Chris

HA Installation of ERP EHP4 on AIX and DB2

Dear All,
I have to do a HA installation of ERP EHP4 system on AIX and DB2. I have followed the standard inst.guide from SAP but I want more information. Can anyone help me in understanding how to go about installing HA in detail. I would be very grateful if anyone can provide me a guide/document of what and how they have done. Can you pls explain me the steps.
I also have few questions
1. Shall i do a Central installation or distributed installation ( meaning CI, ASCS and DB in one server failover to other; CI,ASCS on one server and DB running on different server which in case of failure will move to other server)
2. I know that OS team will do the cluster configuration but is there any other software to be bought for an automatic switchover in case of failures?
3. Mainly, as a BASIS consultant what is our role in HA configuration? What file systems should be defined and nfs mounted?
Request you to take time and answer. Thanks in Advance.
Lastly, i hope this is the right forum. If not , please let me know.

Hi,
>
> 1. Shall i do a Central installation or distributed installation ( meaning CI, ASCS and DB in one server failover to other; CI,ASCS on one server and DB running on different server which in case of failure will move to other server)
>
I think you did not get basic of HA installation. Its neither central nor distributed installation. You need to install CI and Dialog Instance locally on 2 nodes. DB and ASCS instance on the disk that will move across 2 nodes.
> 2. I know that OS team will do the cluster configuration but is there any other software to be bought for an automatic switchover in case of failures?
>
OS team will do file system config so that file system having ASCS and DB should move across 2 nodes. And rest of the file system should be local.
After installation making cluster movement automatic both OS and SAP Basis guy have to work together.
> 3. Mainly, as a BASIS consultant what is our role in HA configuration? What file systems should be defined and nfs mounted?
>
I would say primary role in HA installation is of Basis guy. Because he is the person who will decide what approach will you take to install HA either active-active or active-passive. Its you on whom requirement OS guy will work.
Thanks
Sunny

Regd: CCMS and Alert ?

Hi @,
I have some doubts regd CCMS and Alert :
1.Whether CCMS config is mandatory to use alerts ?I havefound in some places tht it is not required then where will be alert available if i trigger
2.Steps to configure CCMS to include XI as it is not configured in my system?
REgards

1.Whether CCMS config is mandatory to use alerts ?I havefound in some places tht it is not required then where will be alert available if i trigger: AlertInbox
2.Steps to configure CCMS to include XI as it is not configured in my system?
Follow these guidelines:
Alerts
transaction handling in XI
/people/michal.krawczyk2/blog/2005/03/13/alerts-with-variables-from-the-messages-payload-xi--updated
Auto triggering of alerts
transaction handling in XI
SCOT
not sending email from alert inbox
CCMS ALERTS
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3

Jsp and db2 problem

Hi guys:
I installed tomcat4, db2 run time client on one red hat 7.2. Everything works fine. My jsp can access db2 database.
Now I am installing the same thing into another box, red hat 7.2, tomcat4 and db2 run time client.
I can write a java code to access the db2 database, and I can access db2 table in the command line. Jsp file is running fine. But when I use the jsp code which is working in another red hat box to access the db2 database, it can not go through and it stops in "Class.forName("COM.ibm.db2.jdbc.app.DB2Driver");" statement.
Does any body have any idea what could be the problem?
Regards,
David

hi,
could you please send me the jsp-db2 connection code.i am really distressed.i can't find it anywhere..must i install db2 run client. i have only db2 personal edition and the rest( tomcat,jre,jsdk,etc..)
Thx
(while tipping my e-mail in registration,i wrote it false)
My treu e-mail is [email protected]
please please send me this code....

OWB and DB2

I have connected Oracle 9i and DB2 v7 and query DB2 in SQL Plus is fine. However, it doesn't for the connection between OWB and DB2.
Anyone can help?
Thanks!

Try the following and use the database link as the source.
1. Copy inithsodbc.ora to initQA_DB2.ora in $ORACLE_HOME\hs\admin
HS_FDS_CONNECT_INFO=DNS_NAME_OF_YOUR_CONNECTION
HS_FDS_TRACE_LEVEL=0
2. Add the following lines to listener.ora in Oracle server ($ORACLE_HOME\NETWORK\ADMIN)
(SID_DESC =
(SID_NAME = QA_DB2)
(ORACLE_HOME = $ORACLE_HOME)
(PROGRAM = hsodbc)
3. Add the following lines to tnsnames.ora in Oracle server ($ORACLE_HOME\NETWORK\ADMIN)
DB= (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)
(HOST=localhost)
(PORT=1521)
(CONNECT_DATA = (SERVICE_NAME=QA_DB2)
(HS = OK)
4. Execute CATalog script for Heterogeneous Services in Oracle server ($ORACLE_HOME\RDBMS\ADMIN\caths.sql)
5. Create database link
drop public DATABASE LINK dwh_qa_db2;
CREATE public DATABASE LINK dwh_qa_db2 CONNECT TO "carlosmo" IDENTIFIED BY "E1Qual" USING 'DB2';
6. Test the connection
SELECT *
FROM SomeTable@dwh_qa_db2

OWB and DB2 connection

I have connected Oracle 9i and DB2 v7 and query DB2 in SQL Plus is fine. However, it doesn't for the connection between OWB and DB2.
Anyone can help?
Thanks!

Try the following and use the database link as the source.
1. Copy inithsodbc.ora to initQA_DB2.ora in $ORACLE_HOME\hs\admin
HS_FDS_CONNECT_INFO=DNS_NAME_OF_YOUR_CONNECTION
HS_FDS_TRACE_LEVEL=0
2. Add the following lines to listener.ora in Oracle server ($ORACLE_HOME\NETWORK\ADMIN)
(SID_DESC =
(SID_NAME = QA_DB2)
(ORACLE_HOME = $ORACLE_HOME)
(PROGRAM = hsodbc)
3. Add the following lines to tnsnames.ora in Oracle server ($ORACLE_HOME\NETWORK\ADMIN)
DB= (DESCRIPTION=
(ADDRESS=(PROTOCOL=tcp)
(HOST=localhost)
(PORT=1521)
(CONNECT_DATA = (SERVICE_NAME=QA_DB2)
(HS = OK)
4. Execute CATalog script for Heterogeneous Services in Oracle server ($ORACLE_HOME\RDBMS\ADMIN\caths.sql)
5. Create database link
drop public DATABASE LINK dwh_qa_db2;
CREATE public DATABASE LINK dwh_qa_db2 CONNECT TO "carlosmo" IDENTIFIED BY "E1Qual" USING 'DB2';
6. Test the connection
SELECT *
FROM SomeTable@dwh_qa_db2

Oracle 11G,10g and DB2 replication?

Oracle 11G,10g and DB2 replication?
=======================================
We are using Oracle 11gR2. We have a table in Oracle filled with partial data (over 200K+, it may grow to 1M). The rest need to be obtained from DB2. It is not from one DB2 table.
The DB2 is configured to run Oracle 10g within it. We have given http interface, where we need to supply(Push) the partial data using HTTP_UTIL package for each row, then DB2/Oracle 10g return the result as XML.
It is a network heavy, slow and not reliable.
Are we able to replicate tables between Oracle 11g and DB2/oracle 10g?
We like to leverage the features on 11gR2 effectively.
I find some interesting folks in this forum.
Did anyone face such situation?
I like to know the best approach with good performance options.
Any idea?
Thanks in helping.

qwe16235 wrote:
The DB2 is configured to run Oracle 10g within it. We have given http interface, where we need to supply(Push) the partial data using HTTP_UTIL package for each row, then DB2/Oracle 10g return the result as XML.
Any idea?http://en.wikipedia.org/wiki/Rube_Goldberg_machine
why is DB2 required to produce XML?

Which files are require for sap IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1

Hi professionals,
Please help me out which file are require to download for SAP IDES ecc6.0 ehp6 with windows 2008 and db2 LUW 10.1
My requirement is to install Windows2008 R2 Service pack 1 + ECC6.0 ehp6 + DB2 LUW
So according to this i found these files,please tell me which one i require. second thing i am not able to find instalation master DVD in it.So which file is best for my environment.
51044815_1           BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51041991_1                 BS2011 Java Components - NW 7.03 1 of 4
51041992                SAP ERP 6.0 EHP6 Components
51041988_6                 NW703 UC-Kernel 720_EXT Windows Server on x64 64bit
51041988_5
NW703 Kernel 720_EXT Windows Server on x64 64bit
51041988_7
SL CONTROLLER 700
51041988_8
SL CONTROLLER 720
51041991_1
BS2011 Java Components - NW 7.03 1 of 4
51048277_3
721 NUC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_7
SL CONTROLLER 700 for SWPM SP06
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048285_2
721_EXT NUC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_4
721_EXT UC Kernel for SWPM SP06 - Windows Server x64 64bit
51048285_5
SL CONTROLLER 700 for SWPM SP06
51048285_6
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
51041988_9
DB2 USER ENV
51041988_11
DB6 USER ENV
51041988_10
DB4 USER ENV
Thanks & Regards,
Bhipra Sakti

Hi Bhipra,
You need below DVDs for ERP 6.0 EHP6 IDES
51041985_11
DB2 USER ENV
70SWPM10SP06_4-20009707.sar
70SWPM10SP06
51044815_1
BD IDES SAP ERP 6.0 EHP6 Inst. Export 1 of 40
51044815_10
BD IDES SAP ERP 6.0 EHP6 Inst. Export 10 of 40
51044815_11
BD IDES SAP ERP 6.0 EHP6 Inst. Export 11 of 40
51044815_12
BD IDES SAP ERP 6.0 EHP6 Inst. Export 12 of 40
51044815_13
BD IDES SAP ERP 6.0 EHP6 Inst. Export 13 of 40
51044815_14
BD IDES SAP ERP 6.0 EHP6 Inst. Export 14 of 40
51044815_15
BD IDES SAP ERP 6.0 EHP6 Inst. Export 15 of 40
51044815_16
BD IDES SAP ERP 6.0 EHP6 Inst. Export 16 of 40
51044815_17
BD IDES SAP ERP 6.0 EHP6 Inst. Export 17 of 40
51044815_18
BD IDES SAP ERP 6.0 EHP6 Inst. Export 18 of 40
51044815_19
BD IDES SAP ERP 6.0 EHP6 Inst. Export 19 of 40
51044815_2
BD IDES SAP ERP 6.0 EHP6 Inst. Export 2 of 40
51044815_20
BD IDES SAP ERP 6.0 EHP6 Inst. Export 20 of 40
51044815_21
BD IDES SAP ERP 6.0 EHP6 Inst. Export 21 of 40
51044815_22
BD IDES SAP ERP 6.0 EHP6 Inst. Export 22 of 40
51044815_23
BD IDES SAP ERP 6.0 EHP6 Inst. Export 23 of 40
51044815_24
BD IDES SAP ERP 6.0 EHP6 Inst. Export 24 of 40
51044815_25
BD IDES SAP ERP 6.0 EHP6 Inst. Export 25 of 40
51044815_26
BD IDES SAP ERP 6.0 EHP6 Inst. Export 26 of 40
51044815_27
BD IDES SAP ERP 6.0 EHP6 Inst. Export 27 of 40
51044815_28
BD IDES SAP ERP 6.0 EHP6 Inst. Export 28 of 40
51044815_29
BD IDES SAP ERP 6.0 EHP6 Inst. Export 29 of 40
51044815_3
BD IDES SAP ERP 6.0 EHP6 Inst. Export 3 of 40
51044815_30
BD IDES SAP ERP 6.0 EHP6 Inst. Export 30 of 40
51044815_31
BD IDES SAP ERP 6.0 EHP6 Inst. Export 31 of 40
51044815_32
BD IDES SAP ERP 6.0 EHP6 Inst. Export 32 of 40
51044815_33
BD IDES SAP ERP 6.0 EHP6 Inst. Export 33 of 40
51044815_34
BD IDES SAP ERP 6.0 EHP6 Inst. Export 34 of 40
51044815_35
BD IDES SAP ERP 6.0 EHP6 Inst. Export 35 of 40
51044815_36
BD IDES SAP ERP 6.0 EHP6 Inst. Export 36 of 40
51044815_37
BD IDES SAP ERP 6.0 EHP6 Inst. Export 37 of 40
51044815_38
BD IDES SAP ERP 6.0 EHP6 Inst. Export 38 of 40
51044815_39
BD IDES SAP ERP 6.0 EHP6 Inst. Export 39 of 40
51044815_4
BD IDES SAP ERP 6.0 EHP6 Inst. Export 4 of 40
51044815_40
BD IDES SAP ERP 6.0 EHP6 Inst. Export 40 of 40
51044815_5
BD IDES SAP ERP 6.0 EHP6 Inst. Export 5 of 40
51044815_6
BD IDES SAP ERP 6.0 EHP6 Inst. Export 6 of 40
51044815_7
BD IDES SAP ERP 6.0 EHP6 Inst. Export 7 of 40
51044815_8
BD IDES SAP ERP 6.0 EHP6 Inst. Export 8 of 40
51044815_9
BD IDES SAP ERP 6.0 EHP6 Inst. Export 9 of 40
51048277_6
721 UC Kernel for SWPM SP06 - Windows Server on x64 64bit
51048277_8
SL CONTROLLER 721 for SWPM SP06
51048532
DB2 LUW 10.1 FP4 RDBMS Windows x64
51048533
DB2 LUW 10.1 FP4 RDBMS CLI/JDBC-Driver
Hope this helps.
Regards,
Deepak Kori

CCMS and PMI monitoring

Hi,
   I do have some doubts regarding CCMS and PMI monitoring..
   As of now we are plannig to configure CCMS.But i want to know about PMI.. when it comes to the picture in monitoring.
   How PMI is different from CCMS ? and which one is the better option to monitor
   Please clarify me...
Regards,
Sandeep

Hi,
Check the thread for details Re: Role of CCMS & PMI in Runtime Workbench?
Thanks!

XI and DB2

Good morning everybody,
I'm a junior in SAP (Just started) ...I would like to know what are the different steps to make interfaces between SAP R3 and DB2 with SAP XI?
Thanks in advance,
Muraii

Hi Murai,
For connecting to R/3, you can use IDoc adapter or RFC adapter. Please see the below links for configuring the above adapters..
/people/michal.krawczyk2/blog/2005/03/29/configuring-the-sender-rfc-adapter--step-by-step
File-XI-IDoc Scenario - File to Idoc
/people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
/people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
For connecting to DB2, you need to use the type 4 adapter for DB2 and connect using the normal JDBC code. The below link gives the details for configuring JDBC.
http://help.sap.com/saphelp_nw2004s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/content.htm
/people/sameer.shadab/blog/2005/10/24/connecting-to-ms-access-using-receiver-jdbc-adapter-without-dsn
/people/ajay.kumar/blog/2005/03/24/writing-bsp-for-sap-r3-version-46
/people/sugree.phatanapherom/blog/2005/08/14/configuring-sld-in-sneak-preview-sap-netweaver-04-sneak
/people/sanyam.kapur/blog/2005/04/30/custom-fields-and-bw-extractors-making-a-mixed-marriage-work-part-ii
Hope these help... Dont forget to reward points if this is helpful..
Also do get back to me in case you need further details...
Regards
Kiran..

Developer 6i and DB2 connectivity.

I am using Oracle8i with Developer 6i.
I need to connect to DB2/400 (running under OS/400) from Forms Developer 6i
i have IBM AS400 Client Access (version : 3, release : 2,
modification level : 0 ) installed on this machine, which
is working allright, i have checked it by using datatransfer from
AS/400.
the username on DB2 is ORACLE (password is same as username).
i have created ODBC system data source (named SYSDB2) for OCA connection
while i connect from sqlplus, it connects with some error messages as
shown below, however it works allright for querying.
SQL> CONN ORACLE/ORACLE@ODBC:SYSDB2 ;
ORA-00022: invalid session id; access denied
ORA-00022: invalid session id; access denied
ORA-00022: invalid session id; access denied
Error accessing PRODUCT_USER_PROFILE
Warning: Product user profile information not loaded!
You may need to run PUPBLD.SQL as SYSTEM
Server not available or version too low for this feature
ORA-00022: invalid session id; access denied
Connected.
SQL>
i have run PUPBLD.SQL but had no affect on these messages .
When i try to create data dictionary views for DB2 from this connection
by running script (Db4dmbld.sql) it does not create data dictionary.
its fine till this happens, the real problem is that i am
unable to connect to db2 by using odbc datasource from forms6i.
when i try to connect it shows some special characters in a
message box which can't provide any information.
please let me know if there is any fix to this problem.
regards,
aamir.

Hi,
the site where you can find it is http://technet.oracle.com/doc/gateways.htm
The gateway has no database functions. The gateway provides an interface by which the Oracle server can direct SQL operations to a DB2 database.
Using a database link, the gateway is identified to the Oracle server. The database link is the same construct used to identify other Oracle server databases.
Tables on the DB2 server are referenced in SQL as:
table_name@dblink_name
or
owner.table_name@dblink_name
If you create synonyms or views in the Oracle server database, you can refer to tables on the DB2 server using simple names as though the table is local to the Oracle server.
When the Oracle server encounters a reference to a table on the DB2 server, the applicable portion of the SQL statement is sent to the gateway for processing. Any host variables associated with the SQL statement are bound to the gateway and, therefore, to the DB2 server.
The gateway is responsible for sending these SQL statements to the DB2 server for execution and for fielding and returning responses. The responses are data or messages. Any conversions between Oracle datatypes and DB2 datatypes are performed by the gateway. The Oracle server and the application read and process only Oracle datatypes.
--Samson
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Aamir Muhammad ([email protected]):
Thanks Samson for you only reply on the
topic, would you kindly tell me where can i find Oracle's Transaction Gateway for AS/400?
Inspite all appreciation that i feel for you, What i think is that Gateways are used to establish connections between two databases not between a tool and a database like forms and AS400.<HR></BLOCKQUOTE>
null

Time Zone issue with 7.0 and DB2

Hi,
We are having a time zone issue with weblogic server 7.0 and DB2 database. I would really appreciate if somebody provides a solution for this issue.
Our db2 DB is located in PST time zone and weblogic server is located in EST time zone.
When we access current timestamp from db2, we are getting PST time converted to EST and EST time zone attached with timestamp value.
I tried to use resultset.getTimeStamp (1,<calendar>), unfortunately this method is not supported in the DB2 driver version I am using.
We want to get same value as returned by db2 with db2 time zone not weblogic server time zone.
And also when we add new record with timestamp column through web service, regardless the time zone value sent by web service client ".Net" ,
Weblogic server converts the java.util.Date value to weblogic time zone and stores in the db.
For example, client sent 17:00 hours CST, but when it gets stored in db through weblogic ws, weblogic converts 17:00 to 18:00 EST and stores in database as 18:00 hours without any time zone. When we read this value back, we are getting it 18:00 EST only not 17:00 CST.
This is fine as long as writing and reading by same weblogic server. If another weblogic server instance in PST time zone read this value, it takes as 18:00 PST.
Due to this our application always shows timestamp hours differently.
Could some body help me to fix this problem, we are getting this problem in production after we moved our DB2 location to different time zone.
Thanks
Balaji

Hi,
Check whether document in the link below is of any use for you..
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/CAGTFTIM/CAGTFTIM.pdf
Regards
K.M.Arun

WLS 6.1 sp3 and XA and DB2

          Our configuration is:
          WLS 6.1 with sp3 on Solaris and DB2 7.2.7 on AIX running on remote server. Local
          DB2 client is installed on Solaris (LD_LIBRARY_PATH and other DB2 related variables
          are set accordingly).
          In some parts of our system we decided to use message-driven beans to process
          some work off side. In some of them we interact with database and send JMS messages
          to trigger some other MDBs. And we need all these operation to be one unit of
          work. Since we have operation on JMS and DB stores, we were forced to use XA and
          DB2 XA JDBC driver type 2.
          Most of the time things work fine ( always in our dev environment where WLS, DB2
          runs on the same Win2000 box), but rundomly we get JVM to crash on Solaris - like
          once a day or two. We are about to roll out to production but with these crashes
          we are confident about stablity of our app. We found that in most cases (but not
          all) those were related to the situation when DB2 connection were dropped or become
          invalid.
          On BEA website I found the information that WLS does not work in XA mode with
          DB2 7.1, because "APP driver falls back to NET driver". Does this still apply
          to DB2 7.2.7? If yes then I do not understand why Java->JNI call would fall back
          to Java->JNI->Java? Besides on IBM site there is nothing which says that type
          2 driver (so called APP one) requires JDBC client running on the same machine
          as database. If BEA claims that this indeed is the case, then it poses severe
          limitation to XA JDBC driver of IBM. Well, it means it is pretty much useless
          (who runs DB and app server on the same box ?)
          Today we just found new information about additional setting for XA connection
          pools that apply to DB2 and Sybase. For DB2 you need to set KeepXAConnTillTxComplete
          to true in your config.xml. We do not know yet if it is going to make things better
          (any input from BEA?)
          Can we get firm statement answer from BEA whether our configuration is supported
          or if not how we can achieve data/JMS integrity without using DB2 XA driver. Would
          using regular DB2 driver in pseudo-XA mode be a best work around, provided that
          the regular one is stable.
          How precisely WLS behave when it needs to orchestrate distributed transaction
          using pseudo-XA JDBC driver and fully-XA JMS server? In second phase does it first
          as DB to commit and if it succeeds it commits JMS, otherwise it rollbacks everything?
          We are very anxious to get our questions answered please.
          Thanks,
          Waldek


Look for sometime around November. No exact date.
Eric
"Dominic Tulley" <[email protected]> wrote in message
news:[email protected]..
Thanks Eric,
you know what I'm going to ask next right?
Any ideas when SP4 comes out?
Cheers,
-Dominic
"Eric Gross" <[email protected]> wrote in message
news:[email protected]..
The next version of Apache that we will support will be 2.0.42/2.0.43
and
the module for that will be included in the next Service Pack for6.1(SP4)
and 7.0(SP2).
The problem with Apache 2 is that when a new release comes out a newmodule
needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
case.
Regards,
Eric
"Dominic Tulley" <[email protected]> wrote in
message
news:3da3f246$[email protected]..
I'm trying to set this up (initially just apache in front of a single
WLS
server but ultimately I want to put it in front of a cluster).
I've installed Apache 2.0.40.
I've copied the mod_wl_20.so file into the apache modules folder.
I've edited the httpd.conf file and added the line:
LoadModule weblogic_module modules/mod_wl_20.so
When I run apache -t to check the configuration I get the following:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache
Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
server: The specified procedure could not be found.
So what's going on here?
Looking at previous postings it sounds like there's an issue with
versions
of apache after 2.0.39 but I can't find a download for that version.Also,
it sounded like the issues were for WLS 7, not 6.1. Can this work
with
2.0.40 or am I wasting my time?
If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
message that has been mentioned in this group already.
Any suggestions appreciated,
-Dominic

CCMS and DB2

Similar Messages

Maybe you are looking for