CCMS Auto-Reaction for custom Local Monitor Set in RZ20

Since I am not able to modify any SAP made monitor sets I have had to make a copy of them and place them under a new heading and then I can add the systems I want to monitor.
Once I make that copy though, I want to add an auto-reaction to the set but once I hit properties it uses my RFC connections and takes me to that system. It is unlike the SAP made ones were once I click Properties it stays within the Solution Manager system and allows me to choose an auto-reaction that I have setup.
Either one of these will work for me, can I add systems to the SAP made sets or can I set an auto-reaction within Solution Manager to a copied set?
Thanks.

Hi,
You can go to t-code RZ21-> Technical Infrastructure and disable the Central Monitoring. Also you can assign auto-reaction methods to your own monitor sets.
Let me know which method you want to copy and I will send you the steps.
Thanks and regards,
Rinkal
Edited by: Rinkal Salia on Dec 29, 2009 7:58 AM

Similar Messages

Central auto-reactions for individual MTEs, not entire MTE classes

Hello.
I am trying to set up central autoreactions on a Sol Man system (CEN) to monitor certain MTEs on a satellite system (soon to be many more satellite systems and other MTEs). I know that auto-reactions can be assigned to a satellite system and specific MTE class in RZ21 on CEN, but I don't want auto-reactions for every MTE in a specific class. For example, I want to monitor the percentage full for a specific file system, which has the class "FilesystemPercentageUsed", but there are many other MTEs in the parent "file systems" branch which also have the same class. I only want a central auto-reaction for the one--not all of the MTEs in that class.
Has anyone else achieved this? If so, I'd love to hear your recommendations. Any help is appreciated!
Thanks!

Hello Matthew,
central autoreaction is only possible for MTE classes.
> For example, I want to monitor the percentage full for a specific file system, which has the class "FilesystemPercentageUsed", but there are many other MTEs in the parent "file systems" branch which also have the same class. I only want a central auto-reaction for the one--not all of the MTEs in that class.
In this case: change the MTE class. As you use already agents (otherwise central autoreaction would not be possible) you can configure the agent to use MTE classes different to the default ones.
The Online documentation for the agents describes this: [Monitoring Operating System Data with CCMS Agents|http://help.sap.com/erp2005_ehp_03/helpdata/EN/2b/6dcd06dc6b084a840f209e027e39b1/frameset.htm].
Regards, Michael

CCMS AUTO REACTION METHOD

hi all,
i hope u all r fine and in the best of ur health.
i have a problem regarding CCMS Auto reaction method , i want to use my own copy of this method
SALO_EMAIL_IN_CASE_OF_ALERT_V2 , but i am recieving a fatal error when ever i try to execute
auto reaction method manualy in RZ21.The reason that i am using this custom copy of this funtion module is that i want to display my own data when ever i recieve the email.
if any body could help me in this regard, thanks in advance.
regards,
Umer Malik
Edited by: Umer Masood Malik on May 19, 2009 1:10 PM

hi Sean / Bhudev,
i have done that but was not working . but later on i find the answer and the solution.
actualy i am working in 100 client and data supplier program was running though in 100 cleint but
the select statement used in was reffering the 100 client tables so thats why when i used the select
cleint specified statement in my report and then tried again , the data collection method was running properly but was not having the data because earlier it was reflection towards the 100 cleint, but now
its pointing to the 000 cleint so its running....
any way thankssss alott for such help...
regards,
umer

CCMS auto reaction methode

Hi guys,
can anybody explain me how I get an email for every alert within the same MTE (ccms)
Auto reaction method is CCMS_ON_ALERT_EMAIL
Thanks
Christian

Hi
Very simple>
set up transaction SCOT
Set up tr. rz20 and rz21
Check this web page
http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/elearning/nw/configuring%20the%20sending%20of%20e-mails%20as%20an%20auto-reaction.sim
this is sim file you need SAP Player installed to be able to see it.
and also check this document>
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f03a64de-1427-2e10-3a9c-f88ab4829623?quicklink=index&overridelayout=true
Best regards,
Peter
Edited by: Peter Nechala on Sep 13, 2011 9:30 AM

CCMS Auto-Reaction Method Disappearing?

Bonjour a tous et a toutes!
Is anyone has their CCMS Auto-Reaction Method Disappearing?
We are in an HA configuration (3 nodes: #1:SCSASCSdb #2: CI +DI #3:CI only)
For some (i.e.: queue blocking) CCMS MTE, we have configured the ZCCMS_Send_Alert_to_ALM_V2 auto-reaction method.
So, with the proper (XI/CCMS) configurations, we get alerted when queues are blocking.
But for some unknown (as least to me) raison, the ZCCMS_Send_Alert_to_ALM_V2 auto-reaction method disappeared when (either we gracefully swith from node #1 to node #2) and-or we crash a node (node #2 or node #3).
Anyone have seen this ?
Thank in advance !

help help !
Anyone have had this error ?

Add a custom alert monitor set in Central Reports of NWA 2004s

Hi,
I installed recently netweaver administrator 2004s to use central monitoring. I created a new CCMS monitor set with RZ20 and was hoping to see this set in the Monitoring -> Central Reports view set of the NWA (drop down box with all the Alert monitor sets defined in the CEN), but it wasn't there. Is there a way to add custom alert monitor sets created with RZ20 in the Central Reports "View Set" of the NWA ?
Thx
Bart

> Hi,
>
> you see all the Monitor Sets of transaction RZ20 of
> the central monitoring system with an activated
> "public" flag (you set it during the creation of the
> monitor set in RZ20).
>
> But:
>
> The application reads the monitor sets only at
> startup. So, if you create a new (public) monitor
> set, you have to restart the application.
>
> You achieve this by restarting the engine, or in the
> Visual Administrator. Go to "Server --> Services -->
> Deploy", "rutime" tab rider, choose "Application",
> and stop and start the application
> "sap.com/tclmwebadminmonitorprovider_ear".
>
> HTH
> Dirk
That helped indeed.
Thx

How to format CCMS auto-reaction email ?

Hi,
I have setup CCMS auto-reaction with solution manager. Please advise whether i can formatted the email more nicely because the standard email format is very basic.
Thank you and best Regads
Fernand

Hi Fernand,
when using the "classic" mailing method, you can not change very much, especially the header leaves unchanged.
But - before changing any function modules - have a look at the delivered method CCMS_OnAlert_Email_V2.
There you have various possibilities for changing the header directly in method definition (RZ21). The way ahead looks like this:
1.) copy CCMS_OnAlert_Email_V2 to Z_MailTest01 (or whatever you like ..--))
2.) Customize your copy, have a look at the parameters SUBJECT_ALERT and SUBJECT_ALERT_CONT. Here you can place your own header text.
3.) Extending the header text by variables: the method supports dynamic values for several MTEs, e.g. $SID, $NODENAME
Further possibilities:
4.) Having done 1-3, you have mails from the same sender (the CEN system). Here you can copy the method and change the sender...
5.) If you want to change the body, you need to create your own alert messages. The effort doing this is little, the effect is great!
Have a look at SE91 and create your own message class (example: Z_CCMS).
And all this without any change in standard coding. Enjoy CCMS!!
Any further questions? Just post!
Hope this helps you!
Kind regards,
Dirk

CCMS Auto Reaction Methods in XI AlertFrameWork

Team,
I have setup my XI box to report all CCMS errors to the ALM framework. The scot tcode has been also setup to receive email.
With MBA (Message Base Alert), such as mapping error, receiver not found, etc, I have access to a list of "containers variable" to report detail about the error.
How can I do the same with all errors I get in CCMS ? The errors get replicated to my ALM framework (and thus can be seen in the AlertInbox), but I have no handle on variables container ...
Thank in advance !
A+

Hi Jose,
yes i have tried to changed to P and to whatever you can imagine but no success, could it be because im trying to do this on IDES?
a bit summarizing of what have I done till now.
I have created in client 000 a shared folder called CCMS_ALERTS, I have configured in RZ20 in menu SAP CCMS Monitor Templates --> Syslog --> Security in this way
Everything has been done in client 000
In General Tab i have:
Message Class: RT
Message Number: 079
Severity of alerts to be triggered: 255
Maximum numbers of alerts kept: 10
Which alerts should be kept: ALL
In Log Attribute Tab i have:
Maximum alerts
Always
As many as possible
In Filter Tab I have:
System log message is selected (ticked)
the i have filter
from ID - US1 to ID US1 at Red (ticked) with severity 255
In the method tab i have:
My Own method that i have created and here it is:
Method (rz21)
Execution Tab:
as Functional module - SALO_EMAIL_IN_CASE_OF_ALERT
on any server
Table fo several MTEs
Control Tab:
Periodically in dialog process (short running program)
Parameter Tab:
SENDER: my user (existing in any of the clients with administrator rights)
RECIPIENT: CCMS_ALERTS
RECIPIENT-TYPEID
Release Tab:
Auto-Reaction Method
Please advice what have I done wrongly
Vladi,

Central auto-reaction for weinqueue and weoutqueue - which MTE Class

Hello,
In my CEN system (SAP Solution Manager), I want to assign a central auto-reaction method - for all my managed systems - regarding :
1. IDoc Inbound Queue - weinqueue
2. IDoc Outbound Queue - weoutqueue
In SAP Solution Manager, from RZ21, Technical Infrastructure, Configure Central System, Assign Central Autoreactions,
you choose the managed system SID, the MTE Class and the "Central Autoreactions".
Do you know what is the MTE Class for both "IDoc Inbound Queue - weinqueue" and "IDoc Outbound Queue - weoutqueue" ?
Thanks
Best regards
PC

Hi PC,
it is ALEIDcMTClass but its common for both Inbound and outbound idocs (Generic).
the other option is ALEIDcMTAttCl but it s generic and is specific to a object you are looking at.
You have to manage/configure the autoreaction according to the object you are looking at.(Monitoring object).
Thanks,
jagan
Edited by: jagadheeshan govindasamy on Aug 31, 2009 6:32 PM
Edited by: jagadheeshan govindasamy on Aug 31, 2009 6:33 PM

Iweb auto adjust for different computer monitor settings

Nobody has the same display settings on their monitor, so how can I get iweb to auto adjust to different computer monitor settings?

Are you referring to screen size? If so many prefer to have their browser window set to the size they want unlike PCs in which the browsers usually always fill the screen blocking out the desktop.
Why not set your site width to a size that can be utilized by all, desktops, laptops and mobile devices. Apple recommends 980 pixel width for that.
There was a post about this some time ago with, if I recall correctly, some code to do that. I think Cyclosaurus posted it but am not sure.
I know its a personal preference but when I land on a site that forces my browser to fill the screen I leave and don't go back.
OT

Possibility to use self created CCMS monitor sets in DSWP

For monitoring we have created a CCMS monitor set in RZ20. To use DSWP
for monitoring, we need to recreate such a set in DSWP; Is it possible
to use the self created CCMS monitor sets in DSWP? Is there f.e. a way
to import sets from RZ20 to DSWP?

Hello Thiago,
There is no possibility of importing Monitoring Sets from RZ20 to DSWP.
Both the transactions are designed in different way and cannot be synchronized via Import / Export.
Infact the way DSWP would display and classify alerts is totally different from RZ20.
I am sorry but there is no way you could acheive this in any Standard SAP Solution Manager System.
Regards
Amit

Auto-reaction method not sending e-mail

Hi everyone,
We are trying to set-up email notificacions for cancelled jobs. So far I've configured SCOT and RZ20 succesfully. The alerts are triggered and the auto-reaction method is active and ready but it's not sending automatics e-mails. If I click on the auto-reaction method status and manually start auto-reaction method it sends the e-mails, but I haven't been able to make it work automatically.
So far I've read every possible thread in SAP forums about the issue and I also have checked the following notes:
Note 671780 - Only trigger auto-reaction method with certain alerts
Note 502959 - RZ20: External e-mail as auto-reaction
Note 939616 - CCMS auto-reactions: Help with troubleshooting
Note 760821 - Auto-reactions no longer work with email
Note 939616 - CCMS auto-reactions: Help with troubleshooting
Note 176492 - Automatic email when an alert occurs (RZ20)
I have tried all the possible control options for method CCMS_OnAlert_Email (currently is executed as a periodically job). I have checked all the jobs generated in RZ21 and still can't get it to work.
This e-mails alerts are to be triggered locally by each SAP productive system. I've already tried to configure this monitoring alert in two of our developing system with similar behaviour: no automatic e-mail is getting send.
Please, advice me on what I should do. I know I'm missing some
configuration but I can't figure out which one.
Best regards

Is the job SAP_CCMS_MONI_BATCH_DP running?
Please note the run time status: "Run required" means,
the alert was triggered, but the auto-reaction method does not start until the next time the CCMS method dispatcher (SAPMSSY8) runs. This can last up to 5 minutes if alerts are generated asynchronously (for example, by an active data collector).
However, the next time the CCMS method dispatcher runs, the auto-reaction method should be executed and the status of the node should be READY.
If the RUN_REQUIRED status does not disappear, it could be for a number of reasons:
- If MTE is present on the local system:
The auto-reaction method must not be defined as the central auto-reaction method.
- If MTE is present on another monitored system and a central auto-reaction method was defined:
Is one of the above true in your case?
An agent from the monitored system must be logged on to the central system, and this agent must be active. Please check whether these agents are active or not in Rz21 and try Re-Registering it.
You can also refer to SNOTE: 939616, 1265906
In the below link search for "RUN required"
http://help.sap.com/saphelp_nwpi71/helpdata/en/49/945f2b9ee72222e10000000a42189d/content.htm
Regards,
Arjun

Auto-Reaction Method - External Operating System Command

Hello ,
I am trying to run a script (test.cmd) on a monitored java system out of solution manager via ccms auto-reaction method, but without success.
I have created a RFC Connection to the java system in transaction sm59, defined an external operation command in transaction sm69 (/usr/sap/test.cmd) and an auto-reaction method using that command. But when I test the command in transaction sm49 with the RFC connection as target destination, the command is executed on the local CEN system (SolutionManager system) instead of the monitored java system. I have no clue where's the problem???
Thanks for any help (points, points, points)
Mirko

Hi Anand,
can you please send me that doc too pleae.
[email protected]
I really appreciate your help.
Thanks,

Central auto reaction....

Hi,
I have configured solution monitoring for R/3 system 4.6C in my solutin manager 3.2. I can see the CCMS alert data using the RFC connection of user CSMREG. Now I want to activate the autoalerts from solutioin manager if any alert comes on R/3 side I should receive a mail with alert information. Tried some things but never get alerts. Some of the documnets says...
The monitored mySAP.com components with SAP Basis are linked with the CEN using the SAPCCM4X agents.
Not sure what does that mean do I have to install CCMS agent ? which are already installed on bot the systems....or is there a way to connect solman agent to R/3 agent....
Can any one please put some light on how it will work..
Regards,
Milan

Hi Milan,
Yes, you need to install the CCMS agents in all the satellite systems, so that the alerts are forwarded to the solution manager (CEN) system. You can then assign the central auto reaction for the alerts.
Hope this helps.
https://websmp202.sap-ag.de/~sapidb/011000358700004459292006E
Regards,
Ravi.

Auto-reaction email with SOLMAN

Hello,
i have configured the the satellites in solution manager (monitoring, EWA...). Now i want configure auto-reaction emailing such availavility, but in the rz20 of SOLMAN i don't find the monitoring parameters of satellites. My question is: if i want auto-reaction configuration for each satellite, i have to configure it in each satellite, otherwise, i can configure it centrally from SOLMAN?
Thanks in advance
Regards
Carlos

Hi Carlos,
As Thomas mentioned , if you are intrested only in availability checks of satellite systems , you have to install only CCMSPING . SAPCCMS4x isnt required.But if you like to monitor other alerts like system logs , job failure , table space monitoring etc etc and want to set up auto reactions you have to install sapccms4x.
For CCMSPING isntallation , go through
http://service.sap.com/monitoring --> Monitoring in Detail -->Availability Monitoring and Agent CCMSPING
Thanks
Prince Jose

CCMS Auto-Reaction for custom Local Monitor Set in RZ20

Similar Messages

Maybe you are looking for