CCMS: CEN configuration - Registration Failed due to RFC : Issue Resolved.

Hi There!
I was trying for CEN-CCMS setup and I was bale to connect my other systems to the CEN, infact I was able to connect all the system, but somehow my DEV box is detached from the CEN box. When I try to run sapccmsr -R -j2ee pf= to register with CEN, at the end of when I enter the details of "csmreg" user of CEN, throws the following error.
INFO: Updated saprfc.ini in agent work directory /usr/sap/ccms/DEV_02/sapccmsr
ERROR: Registration failed: Can't get version of DEV. RfcRc = 2, C_CALL_FAILED
RFC Error Info for SALS_MS_GET_LOCAL_MS_INFO
message:
status: EXCEPTION C_CALL_FAILED RAISED
intstat:
INFO: dsr: dsrlib unloaded.
EXITING with code 1
Illegal instruction (core dumped}
In SM59, the TCP/IP rfc name with those program ID throws error. "Error when opening RFC connection". If I creadted the Program-ID in VA, then SM59 will pass the test connection, but its not the resolution, the DEV box is still detached from CEN.
I redo the configuration with new CSMCONF too
If I check the "monitored Remote System/RZ21 on CEN, it throws:
> Connection test to destination DEV_CCMS_COLLECT terminated with ERRORS
> Error when calling the underlying C function (function 'SALS_MS_GET_L..
I followed the SAP's monitoring guide for NW04s-SP-13
PI-7.0, SP-14
Thanks anyways
vipin
Issue Resolved.
Edited by: Vipin Sagar on Jul 22, 2008 4:08 AM

Hi All,
can any one share the solution for the above error.
I am getting the same error for one of the systems. other systems are working fine.
Thanks and regards,
Sunny

Similar Messages

Lync server call failed due to network issues

hi,
i receive an error while making a lync call to an internal user
"call failed due to network issues"
i have two ip's installed on My NIC but when i remove one ip of the ip's from
my nic, everything seems to work fine.
Kindly help

Hello Matt,
Hope you keeping well..!!
We are communicating with external customers lync server through federation option setup on our corporate lync server. We have received the federation setting from the customer with SIP address which has been setup on our corporate lync servers after
that we were able to browse the customer contact through corporate lync account.
We were also able to chat with external customer but however voice/video functionality are not working through same session. Whenever we try to dial out external customer lync account it ended with error message "call ended due to network issue".
We have checked the setting from corporate lync servers and network point of view but doesn't find any issue which cause the disconnection to voice/video over lync. Could you pl help or guide with the way.
Thanks

Call failed due to network issues

call failed due to network issues lync 2010 client. even when i'm trying to do a test call from my system, same error comes.

Please, share more details on error from logs. Also check firewall ports.
The Media Relay Authentication Service (MRAS) is responsible for notifying the Lync client of the STUN and TURN IP address for ICE. This service
run on UDP port 3478.
To check that the UDP port is open on the firewall between the Internal Lync clients and the Edge server running this service you can use the Microsoft tool PortQry
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

RMAN restore fails due to space issue

Hi,
My database size is 225 GB . I m restoring the backupfiles using RMAN from production backup to the test instance.During restore process rman failed due to space issue.When the error occurred rman restored around 122 GB.
Now i increased the free space in server.So now my doubt is i have to delete the restored files (122GB) and start the restore process again or RMAN will automatically skip the the restored file and resume the process from where it was failed ?
DB Version -11.2.0.2
RMAN error
channel CH2: ORA-19870: error while restoring backup piece /ebs/DEV/backup/GOLD_db_t801111628_s10788_p1.rman
ORA-19502: write error on file "/ebs/DEV/bin/db/apps_st/data/a_txn_data11.dbf", block number 3492608 (block size=8192)
ORA-27072: File I/O error
Linux-x86_64 Error: 28: No space left on device
Additional information: 4
Additional information: 3492608
Additional information: -1
Thanks

When you start the restore from the failure, RMAN knows whcih are restored and it will check file headers. if the headers match, it will skip restoring the files.
Hope this helps,
Regards,
http://www.oracleracexpert.com
RMAN Debug and Trace
http://www.oracleracexpert.com/2012/11/rman-debug-and-trace.html
Time for Change: Migrate your Non-RAC Database to RAC
http://www.oracleracexpert.com/2012/10/time-for-change-migrate-your-non-rac.html

Backup to remote stage failed due to RFC error

Hello!
Recently I have problem to execute a successful online Backup to the external source.
If I start backup from DB13 and analyse the work processes (Tcode SM50) I found the following:
The responsible BGD-WP:
status: On hold , reason: RFC, report: SAPLSSXP
The dev_w8 trace retrieves the following error:
Source RSCROSS10 Line 112.
Error Code DBIF_RSQL_SQL_ERROR.
Module $Id: //bas/700_REL/src/krn/runt/absapsql.c#6 $ SAP.
Function HandleRsqlErrors Line 761.
The DB13-protocol retrieves the following information:
BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3':
Connected to 192.168.200.3 Port 21.
220-FTP server ready. 220 This is a private system - No anonymous login 331 User sapbackup OK. Password required 230-User sapbackup has group access to: administrator 230-This server supports FXP transfers 230-OK. Current restricted directory is / 230-************************************************ 230-* Use SITE command to change client codepage: * 230-* ie, site codepage [client codepage] * 230 ************************************************ 200 TYPE is now 8-bit binary 200 PORT command successful 150 Connecting to port 2734 NiWrite error: -6, bytes to send: 32767 bytes written: 0
BR0280I BRBACKUP time stamp: 2007-10-20 03.08.23
BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkhbgq.ftp -b -c put E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 /sap/DEVB/bdwkhbgq/SR3.DATA3': 1
BR0222E Copying E:\ORACLE\DEV\SAPDATA1\SR3_3\SR3.DATA3 to/from /sap/DEVB/bdwkhbgq/SR3.DATA3 failed due to previous errors.
Can some one help me with this issue?
Thank you very much!
regards
Thom

Hello Eric,
unfortunately it is not possible to do it, because I have only remote access to the SAP system.
Is it possible to analyse the problem with the log files?
If yes --> which logs should I post here?
I went through the monitors in RZ20 and found a lot of errors/warning:
Database:
DBIF_SETG_SQL_ERROR
ORA-03106: fatal two-task communication protocol error
DB error 24909 in FET
SQL error 3106: WP in reconnect status
Background:
Job SAP_COLLECT_FOR_PERMONITOR terminated
Utilisation:
100% > 95% Background work process load exceeds threshold
BackgroundService: SystemWideFree BPWP: 1 WPs > 2 WPs Current value over threshold value.
Abap ErrorInUpdate
Syslog : BasisSystem
Operating system call recv failed (error no. & >E5)
The log file dev_cp retrieves the following information after execution of DB Check:
Trace file of control program (trace level 3)
< Function: BtcTrcInit> Function: main SAPXPG 700
2007-10-23--14-42-27 : Before BtcXpgDetach
> Function: BtcXpgDetach < Function: BtcXpgDetach Accept RFC connection from R/3 system
2007-10-23--14-42-27 : Before RfcAccept
2007-10-23--14-42-27 : RfcAccept returned OK
security check switched OFF
Install RFC call SAPXPG_START_XPG
Install RFC call SAPXPG_START_XPG_LONG
Install RFC call SAPXPG_END_XPG
Wait for RFC call SAPXPG_START_XPG or SAPXPG_START_XPG_LONG
2007-10-23--14-42-27 : Before first call of RFCDispatch
> Function: BtcXpgStartXpgLong
2007-10-23--14-42-27 : Beginning of BtcXpgStartXpgLong
> Function: BtcXpgStartXpgImportLong > Function: BtcXpgParam < Function: BtcXpgParam > Function: BtcXpgParam
Line Text
<No StdOut/StdErr output reported>
Target log table is not identical to source
ItGetLine terminated with NULL
<Function: BtcXpgItTransfer > Function: BtcTrcReset < Function: BtcTrcReset Call mode: VIA RF
Input arguments of BtcXpgStartXpg:
My WP settings are:
rdsip/wp_no_dia = 6
rdsip/wp_no_btc = 3
rdsip/wp_no_vb = 1
rdsip/wp_no_vb2 = 1
rdsip/wp_no_spo = 1
Thank you!
Thom

Oracle Application Server 10.1.3.0.0 OPMN Configuration Assistant Fails Due

I'm in the process of installing Oracle E-Business Suite 12.1 on RHEL.
This is where I'm stuck at: having trouble starting OPMN.
While looking up Metalink, I found Doc ID:ID 422562.1 close to solving my issue.However I'm not sure how to use the solution.
Here's the solution:
1. Install the 32-bit version of glibc-devel-2.3.4-2.19.i686.rpm.
Where can I download this file and any steps to install it would be great?
Note: To install 32-bit packages on a 64-bit system, you may need to use the force option and the nodeps option of the rpm utility.
2. The glibc-devel-2.3.4-2.19.i686.rpm installs the crt1.o into /usr/lib; confirm that this file now exists:
cd /usr/lib
ls -l crt1.o
3. Deinstall this failed installation.
Do I have to deinstall the entire EBS install or just the Oracle AS 10.1.3?
4. Remove contents of /tmp and /var/tmp.
5. Reinstall Oracle Application Server 10.1.3.0.0
How can I reinstall just the Oracle AS 10.1.3?
Please help.

I kindly advice you to move this thread to "Application Server" section of this forum...

Project Server Cumulative Update August 2013 install failed due to login issue/interruption

Hi all,
I was in the process of running the installer (exe) for the August 2013 Cumulative update "uber" hotfix for SharePoint 2013 and Project Server today (KB2817615) on three servers. I was connected to the servers via Remote Desktop, logged in as the
Farm account.
On one of the servers, somewhere during the installation, my Remote Desktop session got "hijacked" by another user who was not aware of the ongoing process..so he was logged in as the Farm account for a few minutes.
I logged back in and found that the install dialog was gone...apparently the install stopped due to the interruption in logins. So I attempted to re-run the hotfix installer, but it now says "There are no products affected by this package installed
on this system."
I've tried clearing the timer cache and running the installer using "PACKAGE.BYPASS.DETECTION.CHECK=1" but neither has worked.
Any ideas on how this can be fixed or re-run?
Thank you for your assistance!
Regards,
Kevin Worthington

Hi Kevin,
Were you able to resolve this issue. I didn't have any interruptions or login issue, the installation cancelled itself!
Any help will be highly appreciated.
Thanks
SJ

Whole online backup from DB13 failed due to processing error

Hello!
I have difficulty by execution of Whole database online backup from DB13 via FTP on the remote target. The backup goes very slow and breaks after a while.
The BRBACKUP action log looks as follows:
backup_mode ALL
backup_type online
backup_dev_type stage
stage_root_dir /sap/DEVB
compress no
stage_copy_cmd ftp
remote_host 192.168.200.3
remote_user sapbackup
#FILE..... E:\ORACLE\DEV\SAPDATA2\SR3_10\SR3.DATA10
#SAVED.... /sap/DEVB/bdwkuudu/SR3.DATA10 #1/6
BR0280I BRBACKUP time stamp: 2007-10-23 01.44.35
BR0063I 6 of 41 files processed - 12000.047 MB of 93092.766 MB done
BR0204I Percentage done: 12.89%, estimated end time: 23:06
BR0001I ******____________________________________________
BR0202I Saving E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6
BR0203I to /sap/DEVB/bdwkuudu/SR3.DATA6 ...
#FILE..... E:\ORACLE\DEV\SAPDATA2\SR3_6\SR3.DATA6
#SAVED.... /sap/DEVB/bdwkuudu/SR3.DATA6 #1/7
BR0280I BRBACKUP time stamp: 2007-10-23 02.38.05
BR0063I 7 of 41 files processed - 14000.055 MB of 93092.766 MB done
BR0204I Percentage done: 15.04%, estimated end time: 21:36
BR0001I ********__________________________________________
BR0202I Saving E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7
BR0203I to /sap/DEVB/bdwkuudu/SR3.DATA7 ...
BR0278E Command output of 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkuudu.ftp -b -c put E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 /sap/DEVB/bdwkuudu/SR3.DATA7':
Connected to 192.168.200.3 Port 21.
220-FTP server ready.
220 This is a private system - No anonymous login
331 User sapbackup OK. Password required
230-User sapbackup has group access to: administrator
230-This server supports FXP transfers
230-OK. Current restricted directory is /
230-************************************************
230-* Use SITE command to change client codepage: *
230-* ie, site codepage [client codepage] *
230 ************************************************
200 TYPE is now 8-bit binary
200 PORT command successful
150 Connecting to port 4977
NiWrite error: -6, bytes to send: 32767 bytes written: 0
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.37
BR0279E Return code from 'F:\usr\sap\DEV\SYS\exe\uc\NTAMD64\sapftp.exe -v -n -i 192.168.200.3 -u H:\oracle\DEV\sapbackup\.bdwkuudu.ftp -b -c put E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 /sap/DEVB/bdwkuudu/SR3.DATA7': 1
BR0222E Copying E:\ORACLE\DEV\SAPDATA2\SR3_7\SR3.DATA7 to/from /sap/DEVB/bdwkuudu/SR3.DATA7 failed due to previous errors 
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.43
BR0317I 'Alter tablespace PSAPSR3 end backup' successful
BR0056I End of database backup: bdwkuudu.ans 2007-10-23 03.08.37
BR0280I BRBACKUP time stamp: 2007-10-23 03.08.43
BR0054I BRBACUP terminated with errors
Any helpful information will be appreciated.
regards!
Thom

this post is duplicated at Re: Backup to remote stage failed due to RFC error
please only post your question once and only in 1 forum.
thanks.

Ecatt script fails due "Error in OLE API method Call" error

Hi ,
Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
Please help in solving this issue.
Thanks,
Asha

>
Asha Nagaraj wrote:
> Hi ,
>
> Ecatt scripts fails due to "Error in OLE API method Call" error, this error message occurs once a while.
>
> We are calling testpartner scripts from Ecatt using REFEXT command. At times this ECATT script fails due to above issue.
>
> Please help in solving this issue.
>
> Thanks,
> Asha
Hi Asha,
Are those components are connected and the necessay settings has been done?
Regards,
SSN.

"Enterprise manager configuration failed due to the ff... 11 g/windows 7

I get this error message, when using DBCA to create a database. Please help! Studying on my own for OCA.
Error message : "Enterprise manager configuration failed due to the following error - Listener is not up or database service is not registered with it. Start the listener and register database service and run EM Configuration Assistant again."
I did the following :
(1)Checked listener service properties and found that the path to executable was
driveletter:\app\product\11.1.0\db_2\bin\oracle.exeoca11g
I change the path above to what is listed below:
driveletter:\app\product\11.1.0\db_2\bin\tnslsnr
I updated :HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\OracleOCA11gTNSListener
image file to reflect the change .
I got the above suggestion from a blog. Not sure if it is right or wrong, but it seems logical. However, it did not resolve my issue
(2) I ran the emca script in db_home/bin directory as suggested by the warning message in DBCA wizard. Reboot my PC. Still no luck.
(3) I open DBCA to verify the database(via delete) is created, and yes it is .
I open EM and attempted to log into the tool as Sys/sysdba user. I get username and/or password are invalid error message. URL: https(strike-through)localhost://158/em/console/logon/logon
I can connect to SQl plus as either a sys/sysdba user but into EM.

Ok here is my listener status
C:\>lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 25-JAN-2013 14:01
:59
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 25-JAN-2013 07:12:48
Uptime 0 days 6 hr. 49 min. 13 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\Barbara\product\11.2.0\dbhome_2\network\admin\l
istener.ora
Listener Log File c:\app\barbara\diag\tnslsnr\Lenovo-PC\listener\alert\l
og.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "OCA11GXDB" has 1 instance(s).
Instance "oca11g", status READY, has 1 handler(s) for this service...
Service "OCA2XDB" has 1 instance(s).
Instance "oca2", status READY, has 1 handler(s) for this service...
Service "oca11g" has 1 instance(s).
Instance "oca11g", status READY, has 1 handler(s) for this service...
Service "oca2" has 1 instance(s).
Instance "oca2", status READY, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
This is the OracleoraDB11g_home1TNSlistner image file value is this
C:\app\Barbara\product\11.2.0\dbhome_2\BIN\TNSLSNR
Aaaah! I do not like the sound of this. Oracle enterprise edition does not support windows home edition and Oracle XE does not have DBCA included.
Ok, so this is a road block, please suggest alternative routes.
Thanks
Edited by: Ant13 on Jan 25, 2013 2:21 PM
Edited by: Ant13 on Jan 25, 2013 2:33 PM

"failed due to bad configuration"

I have a .air program running on nearly 400 pc's in the field. I have an upgrade I would like to release silently. I can get the new .air file to the machines automatically. I would like to run a batch file that will install it, and hit the "Replace" button when it notices that a older version is already out there.
So, I included the Adobe Air Application Installer.exe in the download, I created a batch file that does this:
"Adobe AIR Application Installer.exe" -silent -eulaAccepted -desktopShortcut "C:\Program Files (x86)\MascoVSC\vscassets\program\VSC.air"
THis runs perfectly when the old version is not on the machine, but if it is, I get the error: "failed due to bad configuration".
Any help would be greatly appriciated.

Hi Jeff,
Could you give the ARH tool a try and in the case of an update, do an uninstall first, then install?
Binaries:
Mac: http://airdownload.adobe.com/air/distribution/latest/mac/arh
Win: http://airdownload.adobe.com/air/distribution/latest/win/arh.exe
Linux: http://airdownload.adobe.com/air/distribution/latest/lin/arh
Documentation:
http://help.adobe.com/en_US/air/redist/WS485a42d56cd19641-70d979a8124ef20a34b-8000.html#WS fffb011ac560372f117f43a112b21f7d88d-8000
Thanks,
Chris

OpsMgr Management Configuration Service failed to execute 'DeltaSynchronization' engine work item due to the following exception with event id 29181

Hi , sometimes this error shows in event viewer:
OpsMgr Management Configuration Service failed to execute 'DeltaSynchronization' engine work item due to the following exception
Microsoft.EnterpriseManagement.ManagementConfiguration.Interop.ConfigManager.ConfigurationChangeException: Configuration change occurred during delta synchronization. Delta will be restarted
at Microsoft.EnterpriseManagement.ManagementConfiguration.SqlConfigurationStore.ConfigurationStore.WriteConfigurationDelta(IConfigurationDeltaDataSet dataSet)
at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.DeltaSynchronizationWorkItem.TransferData(String watermark)
at Microsoft.EnterpriseManagement.ManagementConfiguration.Engine.DeltaSynchronizationWorkItem.ExecuteSharedWorkItem()
at Microsoft.EnterpriseManagement.ManagementConfiguration.Interop.SharedWorkItem.ExecuteWorkItem()
at Microsoft.EnterpriseManagement.ManagementConfiguration.Interop.ConfigServiceEngineWorkItem.Execute()
thanks

For this issue, You can refer below link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=se&lc=sv&dlc=sv&tmp_geoLoc=true&docname=c03699441
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
Mai Ali | My blog: Technical | Twitter:
Mai Ali

CEN configuration should be done is which client?

Do I need to create most of the CEN and CCMS agent registration from Client 000?
The documentation isn't very clear on which client to create the registration of the CCMS agent and creating the CSMCONF Start file for CCMS agents.
I also created the CSMREG user under client 000, should it be created under any other clients??
I know the background dispatching in CEN needed to be setup in client 000, but after that the documentation doesn't mention anything about it.
Thanks for your help.
Stephane

Hello Stephane,
CEN Configuration should be done with Client 000
In each case, activate background dispatching in client 000.
In each case, activate central system dispatching in client 000.
Please refer to these links:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90567a7f-2636-2c10-2f8c-9b441f04e9b9?quicklink=index&overridelayout=true
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/d724f879-0901-0010-219b-af6665b95fee?quicklink=index&overridelayout=true
http://help.sap.com/saphelp_nw70/helpdata/en/9d/df1241c738f423e10000000a155106/content.htm
Hope this helps you move forward.
Regards,
Paul

Solution Managers System monitoring and CCMS/CEN

Hi.
Could anybody enlighten me on the Role of CCMS / CEN in the Solution manager Monitoring.
I have set up solution manager to Monitor my landscape. I have set up user defined limits and email alerts. These Alerts and the alerting agent - I assume - are carried out on the system being monitored.
Now the question - I want the Solution manager box to be the CEN and do the Alerting centrally (from the SM box) - Will the MTE's and Alerts that I have assigned and configured through System Monitoring use the properties set up though the CCMS?
I assume I will have to install the CCMS agents on all the target boxes - Will the Solution manager box process the Statics and send out the alerts from itself? If so How much workload does this place on the network and the box?
Why does the solution manager not act as the central processing and alerting box from the start? If we go through the effort of setting up the monitoring - why does it not set up Collection and Alerting at the same time?
Any feedback will be appreciated.
Thanks
Terry H.

Hi Terry,
Solution Manager System Monitoring is using CCMS infrastructure, so we have two different ways to collect data (alerts) from the satellite systems, first via CCMS agents as you mentioned or the option to use RFC destinations to read the alerts. This can be configured automatically by SMSY in Solution Manager. The second option produces higher network workload, because every alert will be checked every 3 minutes, with agents only new alert values will be pushed.
I hope this info helps you
Regards,
uDo

Auto Approval of Self User Registration Fails OIM 11g R2

Use Case : Auto Approval of Self User Registration
Steps followed
1. A New Approval Policy created with Auto Approval flag set as True for Request Level Approval.
2. A New Approval Policy created with Auto Approval flag set as True for Operation Level Approval.
3. The field Organization was pre populated using the Pre Population Adapter, as mentioned below.
+<AttributeReference name="Organization" attr-ref="act_key" type="Long" widget="ENTITY" length="256" required="false" available-in-bulk="false" entity-type="ORGANIZATION">+
+<PrePopulationAdapter name="OrgPrepopulateAdapter" classname="com.plugin.OrgPrepopulateAdapter"/>+
+</AttributeReference>+
4. A new user was created using the "Register New user" Link.
5. Log in as System Adminstration and under Track requests, found that the New request has failed.
6. On click of Request link, the request details shows the Organization field has populated with the expected value.
7. The Logs suggests that the Request failed due to Organization field going Null.
LOG
[2013-02-12T15:50:39.138+05:30] [oim_server1] [ERROR] [] [oracle.iam.request.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: e171ff3c1743d36a:6c2e4f90:13ccdc4a231:-8000-00000000000006f8,0] [APP: oim#11.1.2.0.0] Exception thrown java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
[2013-02-12T15:50:39.138+05:30] [oim_server1] [ERROR] [] [oracle.iam.request.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: e171ff3c1743d36a:6c2e4f90:13ccdc4a231:-8000-00000000000006f8,0] [APP: oim#11.1.2.0.0] Exception thrown Index: 0, Size: 0[[
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
 at java.util.ArrayList.RangeCheck(ArrayList.java:547)
 at java.util.ArrayList.get(ArrayList.java:322)
 at oracle.iam.requestactions.approval.operationlevel.OrgBasedMethodology.getOrgDetails(OrgBasedMethodology.java:215)
-------------

Use Case : Auto Approval of Self User Registration
Steps followed
1. A New Approval Policy created with Auto Approval flag set as True for Request Level Approval.
2. A New Approval Policy created with Auto Approval flag set as True for Operation Level Approval.
3. The field Organization was pre populated using the Pre Population Adapter, as mentioned below.
+<AttributeReference name="Organization" attr-ref="act_key" type="Long" widget="ENTITY" length="256" required="false" available-in-bulk="false" entity-type="ORGANIZATION">+
+<PrePopulationAdapter name="OrgPrepopulateAdapter" classname="com.plugin.OrgPrepopulateAdapter"/>+
+</AttributeReference>+
4. A new user was created using the "Register New user" Link.
5. Log in as System Adminstration and under Track requests, found that the New request has failed.
6. On click of Request link, the request details shows the Organization field has populated with the expected value.
7. The Logs suggests that the Request failed due to Organization field going Null.
LOG
[2013-02-12T15:50:39.138+05:30] [oim_server1] [ERROR] [] [oracle.iam.request.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: e171ff3c1743d36a:6c2e4f90:13ccdc4a231:-8000-00000000000006f8,0] [APP: oim#11.1.2.0.0] Exception thrown java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
[2013-02-12T15:50:39.138+05:30] [oim_server1] [ERROR] [] [oracle.iam.request.impl] [tid: [ACTIVE].ExecuteThread: '7' for queue: 'weblogic.kernel.Default (self-tuning)'] [userId: oiminternal] [ecid: e171ff3c1743d36a:6c2e4f90:13ccdc4a231:-8000-00000000000006f8,0] [APP: oim#11.1.2.0.0] Exception thrown Index: 0, Size: 0[[
java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
 at java.util.ArrayList.RangeCheck(ArrayList.java:547)
 at java.util.ArrayList.get(ArrayList.java:322)
 at oracle.iam.requestactions.approval.operationlevel.OrgBasedMethodology.getOrgDetails(OrgBasedMethodology.java:215)
-------------

CCMS: CEN configuration - Registration Failed due to RFC : Issue Resolved.

Similar Messages

Maybe you are looking for