CCMS Configuration - Central Monitoring and Email Alerts with Solution Mgr

I am trying to configure my CCMS alerts on my satellite systems to be linked into the Solution manager system (acting as the CEN monitoring node). If I have already setup my RZ20 alerts, is there a way I can just link these into Solution Manager.
Thanking you for your suggestions

Try setting up the monitoring RFC connections in SMSY. Once those are setup, you can pull the CCMS data in and view within tran SOLUTION+MANAGER.
If you need more detail, just update this message.
Thanks,
J. Haynes

Similar Messages

How to set alert threshold and email alerts?

Hi!
I have configured Solution manager 3.2 to monitor
our R/3 systems.
I want to be able to set the threshold for tablespace
usage and be able to send an email if the usage
of the tablespace is 80% full.
Could anybody tell how to implement it?
Thanks!

Hi Christy:
There are different approaches to configure alerts, if you are using Solution Manager; I think you can benefit if you choose SolMan and the Central System (CEN) to handle all the monitoring and email alerting.
If this is the case, you will need to install the CCMS Agents on every satellite system in order to trigger remote alerts.
Let me know what is your idea and I can follow with you with the required steps.
Best Regards,
Federico G. Babelis
NetWeaver Certified Consultant
GAZUM Technologies S.A.
Consulting Services and Software Solutions
http://www.gazum.com
...download FREE Marketplace Manager at: http://www.gazum.com/products

Central Monitoring and System Monitoring Setup Guide

Hi,
I need to configure solution manager central monitoring and system monitoring, please advise where i can find the sap document regarding central monitoring and system monitoring for netweaver 7.0.
Thank You and Best Regards
Fernand Lesmana

Hi
please check below link
http://help.sap.com/saphelp_sm40/helpdata/en/0b/160419162a476380b5608e7f27a742/content.htm
regards,
Srinu

Setting monitoring and SLA Alerts via Workspace studio

Hi,
Is it possible to set monitoring and SLA Alert rules via workspace studio. If yes, could you please help me how to do it.
Thanks
James

Hi..
Operational settings such as enabled, tracing, monitoring etc are easily set within eclipse by editing with the text editor rather than the proxy editor..
The SLA Alerts are possible to modify in the same way, but they're a bit more tricky to figure out..
..Mark.

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

Recently the sound on my Iphone 4 for texts, and email alerts started working intermittently. I have upgraded to the latest software and the Apple store even replaced the phone but safe issues

For each mail account, along with designating a primary SMTP server, you should be able to just turn off any and all other SMTP servers you have listed. In that case, if there is a problem with comcast, the message send should just fail.
Also make sure your comcast smtp settings are correct (port, likely 587 but might be something else for comcast, whether you should be suing SSL or not, do you need authentication or not).
You might find the comcast forums useful for getting the settings right - I found this:
http://forums.comcast.com/t5/E-Mail-and-Xfinity-Connect-Help/iphone-email/m-p/66 1151?view=by_date_ascending#M131151
The second poster notes, SSL should be on, authentication should be "password" and you should be using port 995

IPhone 5 iOS 8.1. Message and email alerts don't work. Help!

Message and email alerts are not working. Vibration working fine. Alerts also produce vibration. I've seen a number of similar posts. Thanks!

OK. Called my service provider today. Apparently razmee209 was right. Bell/Virgin network is experiencing LTE problems since September and it affects random people all LTE phones. They said they are working on it. And the solution for now is to turn LTE off and keep the phone on 3G network.
Hopefully it will be fixed soon.

HT204152 what if someone has forgotten icloud id password and email id with which one signed in an iphone

what if someone has forgotten icloud id password and email id with which one signed in an iphone

Find your AppleId: http://support.apple.com/kb/HT5625?viewlocale=en_US&locale=en_US
https://iforgot.apple.com/appleid
how to reset password:
https://iforgot.apple.com/password/verify/appleid

Why have my purchased text and email alerts vanished?

II'm not connected to I tunes and have purchased 2text alerts and email alerts. After assigning them, they disappear. Where are they?

Thanks for the reply. It was after the upgrade. I brought the same alerts again afterwards (it knew I had already purchased them and asked me if I wanted to buy them again). I did but within a day, they had vanished again! Be careful not to buy them again until Apple sort this costly issue out!! They now owe me money!!!!

Email alert from Solution Manager

Hi
I have configured both System and Business Process Monitoring in SAP Solution Manager.
I can catch all the errors and display them in the graphical view, I can see details and so on.
Unfortunately I don't receive any email alert from Solution Manager.
Could somebody provide me a check list to verify where's the problem and why I can't receive email alert?
Thank you
Alessia

Hi Alessia,
I´d like to help you, but could you plz provide me some more information about your configuration: auto reaction methods, scot, type of monitors etc.
Dom

Monitor an Apache service with Solution Monitoring

Dear all,
We are using Solution Monitoring and the Service Level Reporting and now I'd like to monitor an Apache Service to see its uptime.
I tried to create a GRMG scenario for this, however I noticed that a GRMG scenario always requires a port number in the URL.
Does anybody of you know if it is possible:
     1) to monitor an Apache Service with Solution Monitoring (TA DSWP)
     2) to make it part of the Service Level reporting
     3) any other technology to make the uptime of an Apache Service part of the Service Level Reporting
Thanks a lot in advance for your help!
It is highly appreciated...
Best regards,
Roel

Hello Joe,
If u do not want to import any Structure or BOR- Object, u can follow below steps :
1. Create ur data model by adding the properties manually in SAP GW service builder with correct Edm    types.Doing this would be pain in my opinion ( sometimes we are forced to do this but no other option    doing this way )
   Create associations & navigation needed.
2. U can generate run-time objects.
3. Go to appropriate classes and implement methods with ur Business Logic.
4. Register ur service & consume.
U can also import RFC to create data model and create mapping as per required by implementing correct method as well.
once u do this generate objects and register service and consume it.
Check this out for ur info :
Detailed step by step procedure for Creating Gateway Service with all the CRUD Operations and testing them in Service Explorer Part1
Regards,
Ashwin

CC4.0 - Management report and email alerts

Greetings-
1. In Abap based CC4.0, Managemnet Report tab is not showing any result.
2. Email alerts are not reaching out to monitors email id.
CC cockpit's config for enabling these looks ok. Pls suggest wat are the steps(and how to) required outside cc cockpit in this regard.
Would appreciate your quick response.

2. Email alerts are not reaching out to monitors email id.
Did you check with your basis guy on SMTP server configuration in ABAP client (tcode SCOT)?
Thanks
Himadama

Script to Find latest Modify date, and email alert if last modify is older than 4hrs or so

So, I want to monitor a directory, and get an alert if any file in the directory was not modified in the last, 4 hours or so.
I think I'm on the right track, but I'm missing some pieces here. Any suggestions?
Here's what I got so far:
::Set time and date to use later if needed
set currentTime_Date=%time% %date%
::For loop to pull the last file (I can't seem to pull the last modify time/date with it... this is where I need a hand)
FOR /F "delims=" %a IN ('DIR "*.*" /B /O:D') DO SET NewestFile=%a
::Email latest file using blat
blat.exe -to [email protected] -server [email protected] -f [email protected] -subject "File Checker" -body "test" -attach %NewestFile%
(Not sure if I can use the variable for my newest file here or not)
Any suggestions?

Upgraded to V4 PS, and same error with this script (Note you had the variables and first function doubled up)
$folder='C:\v1\temp'
$Logfile = "C:\PicksheetMonitoring\WhileLoop.log"
function logit($msg){
$msg='[{0}]{1}' -f [datetime]::Now, $msg
$msg|Out-File $logfile -append
logit 'Running check'
if([datetime]::Now - (Get-Item $folder).LastWriteTime -gt [timespan]'0:4:0:0'){
Send-MailMessage -to "Picksheet Analysis <[email protected]>" -from "Picksheet Alerting <[email protected]>" -subject "It's been at least 4 hours since last Automation run" -smtpserver "exch01.domain.com" ..
logit 'alert sent'
}else{
logit 'all files good'

Prime Infrastructure 2.0 email alerts with hostname?

I have configured email alerts however in the message it shows up with the IP address instead of hostname.
Is there a way to configure the hostname to be added? Custom text or adding the switch differently (added by direct IP search)?
Thanks,
Chris

I see now, this is a poor carry over from NCS. The option that says include "controller" in email does provide the switch hostname. Hopefully by version 3.0 they will have all the wireless naming fixed when it applies to converged.
Thanks Rob!

WRVS4400N - Logging and Email Alerts when I use a VPN client - Firmware bug?

Hi folks -
I've got a problem with my WRVS4400N that has been dogging me for a long time now, and I'm finally fed up with the email alerts.
My wife has a VPN client for her work, on her laptop. It is nothing fancy, normal IPSec VPN, details on it I can get if needed, but it's just VPN.
My WRVS4400N is running 1.1.03 firmware, latest on the site. I have all VPN pass-throughs enabled. VPN connectivity for the wife works great, no problems that I'm aware of for her functionally.
The problem is, that I have logging turned on with email alerts. When my wife uses her VPN connection, I get flooded with alerts from the router with all sorts of goobly goo information. It's almost like there is a bug in the router firmware that is parsing information incorrectly.
Log levels are set to 0,1,2,3. Email alerts enabled. DoS threshold is 50, Log Queue is 100, Log Time is 60. SMTP information for my mail server populated of course, and Local Log enabled.
Below is a sample of the email body that gets sent. My wife has been using her VPN connection for about 3 hours tonight, and already I've been flooded with over 1000 emails.
Here's some body content:
Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN05 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN07 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENv8 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENW9 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENf CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN20 CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN43 CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN† CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENy CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENb CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENu CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENH CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LEN=CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136 Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENI CID=054619136Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:21 - CTÃ8314c0, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENE CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=w GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136 Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN@3 CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENQ1 CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LENX CID=054619136Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 71.70.237.8 PRˆ0B LENq CID777216Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=iginal GRE: 192.168.0.206 -> 216.27.6.31 PRˆ0B LEN` CID=054619136
Jan 5 22:28:24 - CTÃ831e60, MasterÁceab60, DIR=ply GRE: 216.27.6.31 -> 7
Does anyone have any ideas? This seems like a code bug to me, but how do I go about reporting to Linksys?
Of course, I can turn off email alerts, but then that defeats the purpose of the router being able to tell me when something is awry.
Any help would be appreciated!
Thanks,
Jesse T.

hay,
Nobody can test this?
nobody has a 5520?

Configure ESS/MSS Approval Email Alert

Dear Gurus,
I'll using the ESS/MSS module for request a leave and claim.Can we do the configuration in SAP,if the requestor fill the application leave using SAP then send it,after that the Manager get the email alert from Outlook to approve the leave using SAP system.And also if rejected the requestor also get an email alert.See below;
1) Is there a way to send or inform the approver that their have to approve the leave via email like outlook.
2) And to inform the requestor that their leave is rejected via email using Outlook.
Many thanks
/Shah

Hi Shahril,
Your requirement can be very well handled in the system.
Please follow the given steps:
1) Go through the SPRO node documentation for all the nodes under:
Personnel Management->Employee Self-Service->Service-Specific Settings->Working Time->Leave Request->Processing Processes
2) Copy the std. workflow 12300111 to a custom one and insert the Send Mail activity in the workflow wherever required i.e., Send Mail to approver for approval intimation and Send Mail to leave requestor for Rejection intimation
3) Use the above custom workflow in the node:
Personnel Management->Employee Self-Service->Service-Specific Settings->Working Time->Leave Request->Processing Processes->Specify Processing Processes for Types of Leave
Picture will be clearer to you once you go through the config node documentation as suggested above.
Also, you will need a workflow consultant to do the required changes in the workflow.
Hope this helps.

CCMS Configuration - Central Monitoring and Email Alerts with Solution Mgr

Similar Messages

Maybe you are looking for