CCMS Configuration in ECC6.0

Hi ,
how to configure CCMS monitoring for ECC6.0?
how to use RZ20 t-code?
Please Help.
Thanks,
Mohit

Hi
You can find lot of documentation in the following link for configuration and working with CCMS.
https://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
Also please check Note 939616 - CCMS auto-reactions: Help with troubleshooting
Note 429265 - CCMS monitor architecture: Central auto-reaction
Note 176492 - Automatic email when an alert occurs (RZ20)
SAP Note 939616 - CCMS auto-reactions: Help with Troubleshooting
Also, excellent SIM file guides at sdn
Setting Up your Central Monitoring [original link is broken]
Regards
Uday

Similar Messages

  • Troubleshooting of CCMS Configuration in SAP-PI 7.1

    Hi
    I have configured the CCMS configuration in PI 7.1 My intention to raise the email alerts if anything goes wrong
    I have done it using the below weblogs....
    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
    /people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/3187. [original link is broken] [original link is broken] [original link is broken]
    I have done the following steps in 000 client
    1. activated the central Dispatching job
    2. Configured the SCOT
    3. created the RFC destination to target client (200 in my case ) .. as per note 0176492
    4. Specified the parameters in CCMS_OnAlert_Email_V2 .Sender id existing user in 000 client.
    Below are the parameters i have specified in Auto reaction method
    SENDER- SAP*
    RECIPIENT- mentioned mail address
    RECIPIENT-TYPEID- U
    Here i do have one doubt on sender id. do we need to specify the dialog user or does SAP* serve our purpose.?
    I hope everything as per procedure and now i do see alerts in RZ20 t-code dnt get any email alerts
    Can someone through some light on this.. and guide how to troubleshoot my configuration.
    Thanks in Advance.
    Regards,
    Deep

    You can use any dialog/system user, the user must have a valid e-mail address populated on the user master though.
    Regards
    Juan

  • CCMS Configuration ?

    Hello all.....
    Please tell me how to do CCMS Configuration ?
    My environment is MS SQL, SAP4.7, WINDOWS 2003 Server
    Gayatry.

    Hi,
    Check this....
    http://help.sap.com/saphelp_nw70/helpdata/en/72/e670375fbf307ee10000009b38f8cf/frameset.htm
    Refer this also...
    Here is the link for the file you uploaded:
    http://download.yousendit.com/F7A778914F4FE3B9
    Note: Points always encourage me reply!!

  • How to down load CCMS configuration to a file

    Dear Experts
    We have configured CCMS in solution manager for system monitoring. I want to down load all the CCMS configuration to a spread sheet, Basically i need to MTEs, auto reaction methods assigned, threshold values , description etc
    Please let me know if there is any standard report or any other way to down the entire CCMS configuration to a file,
    Thank you
    Bimal

    Hi Bimal,
    Sadly there is no such feature (although you are not the first person to want it!).  As long as you assigned your autoreaction methods at the MTE class level instead of the MTE level, you can get this directly from the tables:
    CSMTOOLASG - central ARM assignments in the central monitoring system
    ALCLASTOOL - local method assignments in each satellite system (use query WHICHTOOL = 030 to only see ARM assignments)
    The threshold settings are always stored in the satellite systems, check the tables:
    ALGRPCUSPF Alert: Group Customizing data performance class
    ALMTCUSPER Alert: MT-specific Customizing Performance-Class
    Another approach would be to create a custom tree in RZ20 containing only the nodes that you are interested in.  From that tree it would be easy to go to Views --> Threshold Values and Views --> Status Autoreaction.  This would give you a LIVE view of the current threshold values & ARM assigments (which you could print or save as a local file for your records if desired).  True, it would not be in a table form, but actually CCMS is hard to put in a table form anyways, because of the tree structure of the MTEs.
    Jon

  • CCMS Configuration Guide of ECC 5.0 and BW 3.5

    Hi,
    Can anyone send me the CCMS configuration Guide (Step by Step) for ECC 5.0 and BW 3.5.
    Regards
    Chandu

    Hi,
    Try this,
    https://www.sdn.sap.com/irj/sdn/docs?rid=/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
    http://service.sap.com/monitoring
    Thanks
    DST
    Message was edited by:
            DST

  • CCMS configuration question - more than one sapccmsr agent on one server

    Hello all,
    this might be a newbie question, please excuse:
    We have several SAP systems installed on AIX in several LPARs. SAP aplication server and SAP database is always located in different LPARs, but one LPAR can share application server of several SAP systems or databases of several SAP systems.
    So I want to configure SAPOSCOL and CCMS-Agents (sapccmsr) on our databse LPARS. SAPOSCOL is running - no problem so far. Due to the circumstance that we have DBs for SAP systems with kernel 4.6d, 6.40 (nw2004), 7.00 (nw2004s) I want to use two different CCMS-Agents (Version 6.40 non-unicode to connect to SAP 4.6d and 6.40 + Version 7.00 unicode to connect to SAP 7.00).
    AFAIK only one of these can use shared memory segment #99 (default) - the other one has to be configured to use another one (e.g. #98) but I don't know how (could'nt find any hints on OSS + Online Help + CCMs-Agent manual).
    Any help would be appreciated
    regards
    Christian
    Edited by: Christian Mika on Mar 6, 2008 11:30 AM

    Hello,
    has really no one ever had this kind of problem? Do you all use either one (e.g. windows) server for one application (e.g. SAP application or database) or the same server for application and database? Or don't you use virtual hostnames (aliases) for your servers, so that in all mentioned cases one CCMS-Agent on one server would fit your requirements? I could hardly believe that!
    kind regards
    Christian

  • Barcode configuration in ECC6.0

    Dear Friends,
    We have urgent client requirement to configure barcode functionality in ECC6.0 version. Please guide me technical and functional configuration need to configure the sytem.
    Best Regards

    Hello Jaya,
    Are you using Warehouse Management?
    I think this url will help, it talks about the Barcode activation.
    http://help.sap.com/saphelp_46c/helpdata/en/60/0691384ec60126e10000009b38f8cf/frameset.htm
    Also, check with your hardware provider (RF device) on how to integrate with SAP.
    Regards
    Arif Mansuri

  • XI CCM Configuration Scenario

    Hi,
    In the CCM Cookbook there are two business scenario sections, 'configuration for uploading supplier data' and 'master data transfer to connected SRM server'. I'm not sure what these two are actually used for as well as which one would you use if you want to upload or load the catalog with your own materials using SRM program BBP_CCM_TRANSFER_CATALOG?
    Regards,
    Jerry

    Hi Jerry,
    some ellaboration:
    uploading supplier data' :
    Here you get information/content from suppliers in one of the formats (CSV/XML/Ecx/BME catt.You upload the same in CAT (catlog authoring tool) of CCM with Cat_Manager role.
    'master data transfer :
    Here yr SRM product masters are transferred to CCM-CAT by running the said report which generated the catalog SRM_EXTRACTED_CATALOG in CAT automatically.
    BR
    Dinesh

  • CCM configuration.

    Hi
    We are in SRM4.0, we plan to configure CCM .
    Do we need to define logical systems in SPRO for CCM as well.
    Regards
    Ashish

    Hi,
    If you have different client/system for CCM then you need a different logical system, we used both CCM and SRM in same client so logical system for CCM is same as SRM system.
    Hope this answers your question.
    Regards
    Sreedhar Vetcha

  • CCMS configuration for historical data of a new application server

    Out CI & app servers are configured in CCMS before I joined the team. Around months back a new application server added but it seems for that CCMS is not capturing histrorical data.
    In ST6N, I get all app servers name including the new one. When I click on the new app server and click on Snapshot then detailed information for CPU,memory etc are displayed but when I click on resources under "Previous hours" or "History" to get CPU,memory etc details then an error pop-up is displayed i.e. "No Performance MTEs  availbale for category CPU" or "No Performance MTEs availbale for category MEM" [availbale <- SAP typo].
    How to make sure that we can get previous hours and as well historical cpu,memory use informations ?

    Hi, the data you are trying to see is collected by saposcol.
    1) Log on to the specific application server and verify that everything is working correctly with saposcol:
    ST06->Operating System Collector->Status
    ST06->Operating System Collector->Available days
    ST06->Operating System Collector->Log file.
    2) Installing an additional App server should have configured the statistical data setup automatically:
    ST03N - check if the the app server is listed.
    ST03N->Collector->Performance Monitor collector->Log
    3) Check transaction RZ03 that there are no conflics in the Operation Mode.
    4) Run the program RSCOLL00 manually on that app server.
    This should give you a starting point .....

  • CCMS Configuration - Central Monitoring and Email Alerts with Solution Mgr

    I am trying to configure my CCMS alerts on my satellite systems to be linked into the Solution manager system (acting as the CEN monitoring node). If I have already setup my RZ20 alerts, is there a way I can just link these into Solution Manager.
    Thanking you for your suggestions

    Try setting up the monitoring RFC connections in SMSY. Once those are setup, you can pull the CCMS data in and view within tran SOLUTION+MANAGER.
    If you need more detail, just update this message.
    Thanks,
    J. Haynes

  • Help Configuration in ECC6.0

    Hi All
    We have a ECC6.0 ABAP stack system. Now we have to configure the help on it. I have gone through some posts on SDN regarding this and came to know that the SAP Library DVD has to be downloaded. I am not able to find this under
    Downloads-> Installation and Upgrades-> Entry by Application Group->ERP->6.0-> installation and upgrades.
    Think i am not searching for it in the right place.
    Could anyone tell me where to find this.
    Thanks in advance.

    There's a link to this on the help.sap.com site which points to this download area
    [here.|http://service.sap.com/~form/handler?_APP=00200682500000001943&_EVENT=RESULT&BAS=&TITLE=&HIDE=&HIDE_EXPERT_SEARCH=X&SEARCH_STRING=50080964&SEARCH_METHOD=ALL&SEARCH_MAX_RESULT=20&RESULT_PER_PAGE=10&SEARCH_TA=&SEARCH_V=&SEARCH_CD=X&SEARCH_BPAT=X&SEARCH_SPAT=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X]
    Hope that helps.
    J. Haynes

  • CCMS Configuration RFC Error

    Hi
    I am trying to configure CCMS in our landscape.
    In RZ21 - Technical Infrastructure - Configure Central System - Create Remote Monitoring Entry
    When I try to Create a new ABAP system RFC connection, I am recieving an error
    "Error when opening an RFC Connection"
    "Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function:"
    I was using client - 000, User - csmreg.
    SOLMAN 7 Ehp1.
    Please help me in resolving this error.
    Thanks and Regards
    laxmikanth

    Hi
    Thank you for your replies.
    I am working on SOLMAN 7 EhP1.
    I have logged into SOLMAN using my User ID and not CSMREG
    In RZ21 - Technical Infrastructure -->Configure Central System -->Create Remote Monitoring Entry
    In EhP1 the screen is modified so that we can create RFC Connections SID_RZ20_COLLECT & SID_RZ20_ANALYZE without using SMSY or SM59. We have to give the entries for
    1. Type of System ( In drop down list) - ABAP, JAVA, DualStack, etc.
    2. SID
    3. Hostname
    4. Client Number
    5. User for RFC Connection. (here I am using CSMREG of the Monitored ABAP System)
    As we give the above entries RFC Connections to monitored systems are automatically created.
    For this I am getting errors:
    "Error when opening an RFC Connection"
    "Error during remote call of SAL_MS_GET_LOCAL_MS_INFO function:"
    KIndly help.
    Thanks and Regards,
    Laxmikanth

  • Re: CCMS Configuration Query

    Hi,
    I have dought in configuration of CCMS. We need to define RFC Designation in CEN. Is there any configuration to be made in remote system(ABAP system).
    Regards,
    vivek

    Hi,
    Plese check the link below
    http://help.sap.com/saphelp_nw70/helpdata/EN/76/e670375fbf307ee10000009b38f8cf/frameset.htm
    Hope it helps you.
    Rgds,
    Suman

  • CCMS configure

    Hi gurus
    could you please provide me with an information or documentation about configuring CCMS  from the beginning? I really want to read about it but step by step from the beginning. What i have to do to have it set up at my system? Which steps i have to preform first before starting configuring the CCMS? If you have some documentation form me (the dummey) ) i will be happy
    thanks a lot guys
    vladi

    hi,
        stsrt the CCMS T code:SRZL.
       CCMS should be regularly used and maintained by the system administrators both of keeping a smooth operation and making the most out of the available sources.
      if you cinfigure the CCMS.first do these ones.
    1.configure the instances and operetional modes.(RZ04)
    2.alert thresholds
    3.configure and submit the performance collectors.
    4.configure logon groups.
    USES for CCMS:
    1.online alert monitoring.
    2.performance problem analysys.
    3.importing and maintaining the SAP system profiles.

Maybe you are looking for

  • IPod classic not recognised by iTunes on Mac

    I have an 80Gb iPod classic video. It has suddenly stopped being recognised by iTunes on my iMac. It IS recognised by the iMac though. iTunes does recognise my iPhone and iPad. I've restarted the Mac and reinstalled iTunes but no difference. I tried

  • MacBook Pro Retina - Images in PS look great, but when uploaded to web too big and distorted

    Part of the reason I hated using my Mac for graphic and web design is that when I create images in adobe photoshop everything looks amazing. However, when I upload them to the web, they are way too big and look distorted, this includes text. I'm tryi

  • Having problems with some websites like justin.tv

    I'm using the beta and i can't submit feedback i get this when i try to Forbidden (403) CSRF verification failed. Request aborted. when i go to www.justin.tv i have to refresh the chat for it to update and i have to refresh to see new messages and to

  • Since upgrade my ringtones don't work

    ringtones don't work on my iPhone since upgrade.  It shows them on my contacts, but I get normal ring when I get a call.

  • Camera RAW and Nikon D800/CS6

    I upgraded to Photoshop CS6 from CS5.X and I can not open RAW files in Camera RAW for my Nikon D800.  It functioned properly in CS5 with the latest RAW release but won't work in CS6.