CCMS for XI----- Urgent

Hi all,
I am trying to configure CCMS for XI.If anyone have a document and have a idea means please provide so that it will be very helpful for me.
Thanks and Regards
Vijay kumar G

Hi Vijay
Check this doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
Cheers !!!
Satish Kumar
Reward points if useful

Similar Messages

For one Urgent Change during performing the Approval(chnging the status to 'To be Tested') system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.

For one Urgent Change while performing the one of the Approval before changing the status to 'To Be Tested'
We are getting below error.
The system does not recognize any changes using the CTS WBS BOM in the development system. The transaction is therefore incorrect or the status was reset by the system.
COuld anyone please help us to know, How it can be resolved?
We also have this below error.
System Response
If the PPF action is a condition check, the condition is initially considered as not met, and leads to another warning, an error message, or status reset, depending on the configuration.
If the PPF action is the execution of a task in the task list, and the exception is critical, there is another error message in the document.
Procedure
The condition cannot be met until the cause is removed. Analyze all messages in the transaction application log.
Procedure for System Administration
Analyze any other messages in the task list application log, and the entries for the object /TMWFLOW/CMSCV
Additional Information:
System cancel RFC destination SM_UK4CLNT005_TRUSTED, Call TR_READ_COMM:
No authorization to log on as a trusted system (Tr usted RC=0).
/TMWFLOW/TU_GET_REQUEST_REMOTE:E:/TMWFLOW/TRACK_N:107
For above error Table /TMWFLOW/REP_DATA_FLOWwas refreshed as well but still the same error.

If you are in Test System, you can use function module AA_AFABER_DELETE to totally delete the depreciation area (tcode SE37, specify chart of depreciation and depreciation area), After that recreate your depreciation area and run AFBN. But before you do that, have you created a retirement transaction type that limits the posting on your new depreciation area? If not create one.
Hope this helps.
Thanks!
Jhero

New Note: 990602 FAQ CCMS for MaxDB/liveCache

There is a new FAQ note which answers questions about CCMS for MaxDB and liveCache.
Don't hesitate to contact me when you are missing information in the note.
<a href="https://websmp104.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=DISPL_TXT&_NNUM=990602&_NLANG=DE>">Note: 990602 FAQ CCMS MaxDB/liveCache</a>
Message was edited by: Christiane Hienger

Correct link would be of course
<a href="https://websmp104.sap-ag.de/~form/handler?_APP=01100107900000000342&_EVENT=DISPL_TXT&_NNUM=990602&_NLANG=DE>">Note: 990602 FAQ CCMS MaxDB/liveCache</a>

I am suspicious about my billing. What am I going to do? Awaiting for your urgent reply.

I am suspicious about my billing. What am I going to do? Awaiting for your urgent reply.

These are user-to-user forums, you are not talking to Apple here.
As you don't say what you are supicious about it's difficult to know what problem it is that you think that you have.
You can check the purchase history on your account via the Store > View My Account (Store > View My Apple ID on iTunes 11) drop-down menu option on your computer's iTunes), though I'm not sure if that shows in-app purchases and/or auto-renewing subscriptions . If you haven't purchased anything and you haven't added or changed your credit card details (when you do then a small temporary store holding charge may be applied to check that the details are correct and valid, which should disappear within a few days) then you can contact iTunes support via this page if you have charges that you don't think that you should have : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

CCMS for MTE Class CCMS_DB_mcmtc

Hello!
I would like to set up CCMS for satellite systems with SAP DB (MTE class: CCMS_DB_mcmtc)
The very interesting elements from this MTE are:
- Used Log Space
- Last successful Complete Data Backup
- Last Complete Data Backup Return Code
The problem is, if I save this I get the warning:
<SID> : MTE class CCMS_DB_mcmtc : No MTEs currently available
How can this be solved?
Thank you very much indeed!

Hi Thom,
Did you get a solution to your problem? I am having the same problem!
Please share your solution if you got one.
Thank you,
Nic

How to add pictures in CCM for items in SRM_EXTRAXTED_CATLG

Hi guys (and girls of course),
Best wishes for 2007 for all of you.
I've got following issue I've been struggling with: I'm trying to add a picture to items in CCM, but for items coming from R3 (replicated to SRM). I want to use the standard PICTURE/URL field for this ('complex' data type)
(procedure for uploading R/3-materials is currently already working)
I've been checking out following BADI's:
/CCM/IF_EX_CTLG_ENRICHMENT~ENRICH_ITEM
I have found an example for implementing this in another thread and this seems to work for 'simple' characteristics, eg /CCM/CONTRACT_ID as mentioned in the example)
IF_EX_BBP_CCM_CHAR_MAINT~VALUATE_PRODUCT
for additional customer-characteristics this works fine, also for simple standard characteristics (eg /CCM/MPN) this works fine.
But in both cases i seem to be unable to fill the complex characteristic /CCM/PICTURE (subfield /CCM/URL). I tried to use the same syntax as in the CSV-load file (ie /CCM/PICTURE#/CCM/URL) but it's not working as i expect.
When i add this info manually to the field, the picture shows as expected. (But adding this info manually is not an option of course.)
Any thoughts or hints would be greatly appreciated.
Some additional information
SAP_ABA 700 0009 SAPKA70009
SAP_BASIS 700 0009 SAPKB70009
PI_BASIS 2005_1_700 0009 SAPKIPYJ79
ST-PI 2005_1_700 0001 SAPKITLQI1
SAP_BW 700 0009 SAPKW70009
SAP_AP 700 0006 SAPKNA7006
CCM 200_700 0005 SAPK-27005INCCM
SRM_PLUS 550 0006 SAPKIBK006
SRM_SERVER 550 0006 SAPKIBKT06

Hi ,
I was not active on SDN for some time hence did not see yr thread.
We had used SRM_EXTRACTED_CATALOG in our earlier project and managed to get pictures for all the items in shopping.
The path we took:
with the report BBP_CCM_TRANSFER_CATALOG get the SRM_EXTRACTED_CATALOG in CAT
map the relevant categories in SRM_EXTARCTED_CATALOG to /CCM/MASTER_CATALOG.
import all the picture JPEG files for all the items in the MIME of server
SE80->MIME repository -> drill down to BSP/SAP/BC/CCM (sorry i don't remember the exact path and I don' t have the system now) -> create yr own folder-> import all the JPEG files to this folder.
now derive a URL for each item in a format: http:
server name.domain name\services (sap\bc\bsp\cat\yr folder name\file name)
validate this URL in IE
it should derive the picture from the MIME of yr server and show you on screen
now go to mastrer catalog ->open the chara "image" for each item -> paste this url and type (JPEG) -> and save the item
this should give picture of each item when you are shopping in EBP as preview and in detail also
it's somewhat cubersome to paster those URLs but it's one time activity.
Helpful?
BR
Dinesh
reward if helps

OIM with EBS HR for recon and UM for provisioning - urgent

Hi All
I am trying to setup OIM with EBS HR mod as the trusted source and EBS User mod for user provisioning. I am using the OOB EBS connector version 90430 with OIM 9.1.0.1. I have configured the reconcialiation and provisioning as per the oracle documentation. But only few of the parameters are reconciled into the OIM->USR table. When I go to Reconciliation Manager, I can see only few data fields in the processed data region and rest are in the unprocessed data region. The recon engine is able to pick up the corresponding values from the HR system but is not able to process the same.
Please let me know where can be the problem reside.
Also when I provision a record into Oracle EBS User mod, even if I give all the required data in the direct provisioning form, an account is created in the EBS system with partial data e.g. email is not getting provisioned.
Please help me in setting up recon and provisioning in OIM - EBS.
This is really urgent.. please help !!!
Thanks

The standard suggestion for that is:
- What's the reeson for using EBIZ connector version *9043*. That's an older version and may be these things which you are referring to could not be part of that connector.
- Use the ORCL_EBS_UM_91000 and ORCL_EBS_ER_91000. You can download it from OTN. This should resolve the outstanding issues for you.
Thanks
Sunny

CCMS for application errors in SAP R/3

Hi Experts,
I am working on File->ABAP Proxy scenario.
My client has configured CCMS in solution manager system to receive alerts from PI as well as from SAP ECC system.
One thing which is not clear to me is how to capture the application errors raised in ABAP proxy (server proxy) in CCMS. I am not clear on below points.
1. Is it required to trigger SALERT_CREATE explicitly in ABAP proxy to trigger alerts in case of application errors?
2. Where to define the alerts using ALRTCATDEF? Is it in SAP ECC or in SAP PI?
3. Do I need to create alert rule in PI RWB for alerts related to application errors occurring in SAP ECC?
I have read the blogs and referred the threads related to CCMS but I could not get much on above mentioned points. Could you please help me in this regard?
Thanks a lot.
Regards,
Prasad

CCMS alerting is different than the alerting available with SAP PI. Therefore when you already have a CCMS setup, there is no need for ALRTCATDEF, PI RWB setup.
Regards,
Prateek

How can we handle for german special characters for EXCEL -----URGENT

HI All,
I have report like to display data in more than one operating unit like german,us,spain.... etc
I used the xml version like
<?xml version="1.0" encoding="ISO-8859-1"?>
and
<?xml version="1.0" encoding="ISO-8859-2"?>
In the above versions I am able to view the output well,but problem with the german/Spain letters.
in place of germna letters .. it is displaying somethign others
eg: 1.NYMPHENBURGER STR. 14 MÜNCHEN BAYERN 80335 Germany
in excel report it is showing as
NYMPHENBURGER STR. 14; MÃ?NCHEN;BAYERN;80335;GERMANY
I registred the template with English Language and terrritory as United States..
Result: I am able to view the ouput without any issues
Issue: displaying other characters in place of German/Spain letters
The report has the Customer Ship To address and Short descriptions ..
please how can we fix this isssue.. it is very urgent for me
Thanks,
HTH
Edited by: user9135824 on Nov 29, 2010 5:07 AM

Hi All,
Any body can provide the solution for this.
Thanks in Advance

Grant Access to folder for everyone - URGENT!!!!

I've created a folder with the "wwsbr_api.add_folder" function, and I want to add privileges to another group or user. The problem arises when a user, different from the one who created the folder, tries to access to the documents contained in that folder. He/she won't be able to access this documents as there is no grant access for them.
Can I give a grant access in that folder to another group or user with another API function?
Version Portal 3.0.9.8.0
It is very urgent so I would appreciate some help from you,
Thanks in advance
kind regards,
Enrique

Just a suggestion:
This question has been asked several times on this forum, and there are some good answers out there. Please try to use the search function before posting a question.
Hint: search on the the word "privilege".

BAPI FOR BOM - URGENT

Could anybody please give me the coding for uploading BOM by BAPI ? Please it is very urgent.
                                                         Regards,
                                                         SAURAV LAHIRY

Hi Saurav,
Try the following Code.
REPORT ZTEST_BOM_BAPI.
DATA:
   it_bomgroup LIKE bapi1080_bgr_c OCCURS 0 WITH HEADER LINE,
   it_variants LIKE bapi1080_bom_c OCCURS 0 WITH HEADER LINE,
   it_items LIKE bapi1080_itm_c OCCURS 0 WITH HEADER LINE,
   it_matrel LIKE bapi1080_mbm_c OCCURS 0 WITH HEADER LINE,
   it_itemas LIKE bapi1080_rel_itm_bom_c OCCURS 0 WITH HEADER LINE,
   it_return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
* Fill the data
* Material BoM Group Header Data
CLEAR it_bomgroup.
it_bomgroup-bom_group_identification = 'BAPI_SMP_COL1'.
it_bomgroup-object_type = 'BGR'.
it_bomgroup-object_id = 'SIMPLE1'.
it_bomgroup-bom_usage = '1'. " YOU COULD CHANGE THE BOM USAGE TO YOUR
*nEEDS
*it_bomgroup-created_in_plant = '0001'.
it_bomgroup-ltxt_lang = sy-langu.
it_bomgroup-technical_type = ' '.
it_bomgroup-bom_text = 'Simple BoM - FM'.
APPEND it_bomgroup.
* Header Details of the different variants
CLEAR it_variants.
it_variants-bom_group_identification = 'BAPI_SMP_COL1'.
it_variants-object_type = 'BOM'.
it_variants-object_id = 'SIMPLE1'.
it_variants-alternative_bom = '01'.
it_variants-bom_status = '01'.
it_variants-base_qty = '1.000'.
it_variants-valid_from_date = sy-datum.
it_variants-function = 'NEW'.
APPEND it_variants.
* Details of the items of the variants
CLEAR it_items.
it_items-bom_group_identification = 'BAPI_SMP_COL1'.
it_items-object_type = 'ITM'.
it_items-object_id = 'SIMPLE1'.
it_items-item_no = '0010'.
it_items-item_cat = 'L'.
it_items-component = '000000000000000078'.
it_items-comp_qty = '1'.
it_items-valid_from_date = sy-datum.
APPEND it_items.
CLEAR it_items.
it_items-bom_group_identification = 'BAPI_SMP_COL1'.
it_items-object_type = 'ITM'.
it_items-object_id = 'SIMPLE1'.
it_items-item_no = '0020'.
it_items-item_cat = 'L'.
it_items-component = '000000000000000076'.
it_items-comp_qty = '2'.
it_items-valid_from_date = sy-datum.
APPEND it_items.
* Details of the materials of the different variants
CLEAR it_matrel.
it_matrel-bom_group_identification = 'BAPI_SMP_COL1'.
it_matrel-material = '000000000000000077'.
*it_matrel-plant = '0001'.
it_matrel-bom_usage = '1'.
it_matrel-alternative_bom = '01'.
APPEND it_matrel.
* Linking items to the corresponding variants
CLEAR it_itemas.
it_itemas-bom_group_identification = 'BAPI_SMP_COL1'.
it_itemas-sub_object_type = 'ITM'.
it_itemas-sub_object_id = 'SIMPLE1'.
it_itemas-super_object_type = 'BOM'.
it_itemas-super_object_id = 'SIMPLE1'.
it_itemas-valid_from_date = sy-datum.
it_itemas-function = 'NEW'.
APPEND it_itemas.
* Create variants
CALL FUNCTION 'BAPI_MATERIAL_BOM_GROUP_CREATE'
EXPORTING
   all_error         = 'X'
TABLES
   bomgroup          = it_bomgroup
   variants          = it_variants
   items             = it_items
   materialrelations = it_matrel
   itemassignments   = it_itemas
   return            = it_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
LOOP AT it_return.
WRITE:/ it_return-type, it_return-id, it_return-number,
         it_return-message.
ENDLOOP.
Reward if useful.
Thanks and Regards,
Maddineni Bharath.

Purch.Order for Assets - Urgent

Hii all of u
Can any one plss explain me how to do Purchase orders for Assets and the required configuration if any...
Plsss help me it is very urgent to me..
I will assign full points
Thanks & Regards
Ramki

Hai,
while creating purchase order, you should assian Account assainment category (A).
In Line item level , in Account assainment category we have to give Asset no and Gl a/c.
ok
Regards
ram

Settings for ME32L(Urgent)

Hi Experts,
I have got an urgent and serious issue.
When we change price for a scheduling agreement item,first we select item and then go for condition tab.Then system will popup a screen by saying "Overview of Condition Screen" ..then we select condition type and press enter....Then it will give a screen by saying "Validity Period for Condition Type"...
Here we maintain new validity period for changed price...
But in our plant when we do for scheduling agreement changes for an item,directly system will show condition types screen rather than showing like above...
Can anybody tell me where to do settings to get those pop up screen when i do change scheduling agreement transaction....
Please do reply me...
Thanks and Regards
MK

Dear MK,
yes , in the Define document type under SA. You can use document type from SAP standard (ex:LPXE) which already use time dependent
Please check below guide :
Definition: time-dependent condition
Purchasing (MM-PUR)
A condition for which a validity period and a scale are defined.
Conditions in info records and contracts are time-dependent. In the case
 of quotations and scheduling agreements, the document type determines
 whether the conditions are time-dependent or time-independent.
The conditions in purchase orders are time-independent.

Activate CCMS for SAP SRM with SAP DB

Hi!
I would like to monitor SAP SRM 5.0 (OS: Windows, DB: SAP DB, Version 7.6.04.11) from SAP Solution Manager.
I have the following problems:
a) it is not posible to execute the tocde DB50 on SAP SRM.
b) it is not possible to see the DB monitor of SAP SRM in SAP Solution
(SAP CCMS Monitor Templates --> Database --> empty)
c)The database is integrated in tcode DB59.
Unfortunately when I execute the connection test I get:
General Connection Data
Connection Name....: SRM
Database Name......: SRM
Database Server....: olda8002
tp Profiles........: no_longer_used
DBM User...........: CONTROL
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: olda8002_SRM_00 (Windows NT)
1. Connect. test with "dbmcli db_state"
Successful
2. Connect. test with command mode "dbmrfc db_state"
Unsuccessful system_failure
Name and Server : SRM - olda8002
DBMRFC Function : DBM_EXECUTE
Command : db_state
Error : System Error
Error Message : timeout during allocate / CPIC-CALL:
'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout during connection setup
3. Connect. test with session mode "dbmrfc db_state"
Unsuccessful
communication_failure
Name and Server : SRM - olda8002
 DBMRFC Function : DBM_CONNECT
 Error : Communication Error
 Error Message : Error when opening an RFC connection
 4. Connect. test with "native SQL" ( SRM )
Successful
What I have done:
I have upgraded the server as well the client software to the version 7.6.04.11
Can someone help me with suggestion?
Could it be the issue with independent path on windows or do I miss some programs?
In tcode DB59 in Connection test the following values could not be determined:
DBMRFC Release (empty)
DBMCLI Release (empty)
Thank you
regards
Thom

Hello Thom,
"a) it is not possible to execute the tocde DB50 on SAP SRM."
-> Run /ndb50n with the database connection SRM created in /ndb59.
 Please give more details about errors.
"b) it is not possible to see the DB monitor of SAP SRM in SAP Solution
(SAP CCMS Monitor Templates --> Database --> empty)"
-> First fix the database connection in /ndb59.
 Please let me know the version/SP of the SAP Basis on SAP Solution Manager system.
"c)The database is integrated in tcode DB59."??
You posted that you created the database connection for the database.
On the application server < Application Server: olda8002_SRM_00 > run ::
/nsm49 ->dbmrfc -> execute -> post results
/nsm59 -> SRM connection -> test connection ->
1) What are DBSL Release/DBSL Patch on the appl. Server?
2) Update with output from the /nsm49 -> dbmcli tool ::
 dbmcli -s dbm_getpath IndepProgPath
3) Check that Path env. Variable of the srmadm on olda8002 adjusted with
 <IndepProgPath>/bin & <IndepProgPath>/pgm
4) Test TCP/IP connections in /nsm59::
 SAPDB_DBM SAP DB dbmrfc server
 SAPDB_DBM_DAEMON SAP DB dbmrfc server daemon
< According your information the test connection in /ndb59 failed for :
 Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
 & Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode) >
 Run /ndb59 -> Connection test -> select the appl. Server -> Connection test
=> /nst11 && check errors in dev_rd at the end.
 /nsm21 -> check the system errors.
 /nst11 -> check the errors in the corresponding dev log of WP.
 Do you have blank space in the IndepProgPath path name?
Thank you and best regards, Natalia Khlopina

CCMS for XI

Hi,
 I am trying to install and register the CCMS on XI system. I am following the document CCMS Agents: Features, Installation, and Operation as suggested by SAP. Found this in the market place at https://websmp108.sap-ag.de/monitoring -> System Monitoring and Alert Management -> Monitoring in Detail. I also saw the web blogs in the SDN related to this. I have a few questions regarding this. Briefly I am giving the procedure that I followed :
1. Download the CCMS agent for the Unicode kernel for my OS.
2. Register the agent sapccm4x for ABAP instance
3. Register the agent sapccmsr for J2EE instance.
This is what the document also says.
But the document assumes we have a central monitoring system ( CEN ). Only then the agent sapccm4x can be registered. But I havent configured any CEN and dont want to. How do I now proceed ? Since I dont have any CEN, I specified the same system on which I am trying to register, as the CEN ( i.e. generated the start file CSMCONF from the same system ). I tried to register sapccm4x, registration exits with error saying that
Monitoring segment belongs to central system
 CCMS Agent SAPCCM4X may only be run for remote segments
 that do not belong to central system I can just leave this and directly proceed with registering the agent sapccmsr for the Java instance ? Then, what should I register for the ABAP instance ? Please clarify the things to me..
Please suggest me how I can proceed with out the central monitoring system.

Hi Vijay
Check this doc
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
Cheers !!!
Satish Kumar
Reward points if useful

CCMS for XI----- Urgent

Similar Messages

Maybe you are looking for