CCMS MAIL ALERT FOR STANDBY DATABASE

Hi All,
I've configured the CCMS alert monitor in my entire landscape & I'm successfully getting alert mails from CCMS alert monitor (T-codes involved are RZ20 & RZ21).
I want to activate the same functionality for my standby database. At least I want to configure the CCMS alert monitor for File System Utilization in my Standby database.
Can any one guide me about the configuration setting for file system utilization in Standby Database through CCMS monitor.
Regards,
Neehir Bhatt

Hi,
Highlevel steps:
- Install the sapccm4x agent on the standby host
- Register the agent to the CEN
- In the agent home directory create a file like oscolfilter.ini In this file enter the filesystems you would like to monitor
- Add the oscolfilter.ini file into the sapccmsr.ini file This is also located in the agent home directory
- Create a MTE for filesystem monitoring in your CEN. Add the relevant monitor attribute there.
- Assign autoreaction via RZ21
For more information, see OSS Note 522453 - RZ20: Monitoring operating system data

Similar Messages

How to set automatic e-mail alert for 90% threshold reach for MAXDBdatabase

Hi,
I want to set automate e-mail alert for 90% threshold reach for MAXDB database i.e. data area. I want to know where i can set the automate e-mail alert for data area in MAXDB database? As i have already have script for oracle tablespace alert if tablespace reaches 90% it sends me an auotmated e-mail.
Please let me know where to do the settings or any script available for MAXDB database data area automate e-mail alert....
Thanks,
Narendra

Hello,
What is the version of your database?
Are you SAP customer?
Please see the MAXDB documentation,
Review the Standard Events at:
http://maxdb.sap.com/doc/7_7/default.htm
-> Glossary -> Event
And u201CMonitoring Free Memory in the Data Areau201D section at:
http://maxdb.sap.com/doc/7_7/default.htm
-> Database Administration
-> Monitoring Databases
see example at:
http://maxdb.sap.com/doc/7_7/default.htm
-> Tutorials ->Database Manager CLI Tutorial
-> Using the Event Dispatcher Function
-> Event-Controlled Sending of E-mails
Thank you and best regards, Natalia Khlopina

SAPOSCOL for standby Database

Hi ,
To read the SAPOSCOL information of DB system ( distributed environment) from SAP Applicaiton, I have created the SAPOSCOL destination SAPCCMSR.<<Hostname>>.99 with below utility
/sapmnt/<SID>/exe/sapccmsr -R pf=/usr/sap/tmp/sapccmsr/sapccmsr.pfl
However, I cannot use this to read OS information when system is running on standby database.
I have searched lot and gone through many links to setup destination for standby DB OS information and no luck.
Can any one help me by providing some information how to setup destination.

Hi Murugesan,
You can configure CCMS monitoring on the standby database .
You can do the following to achieve the same
install the sapccm4x agent on the standby host
- Register the agent to the CEN
- In the agent home directory create a file like oscolfilter.ini In this file enter the filesystems you would like to monitor
- Add the oscolfilter.ini file into the sapccmsr.ini file This is also located in the agent home directory
- Create a MTE for filesystem monitoring in your CEN. Add the relevant monitor attribute there.
- Assign autoreaction via RZ21
For more information, see OSS Note 522453 - RZ20: Monitoring operating system data
Hope this helps.
Regards,
Deepak Kori

E-mail alert for sales managers.

Dear all,
We are using SAP CRM 6.0. I was configuring e-mail alert for the managers whenever a transaction is created in crm. The mail is delvering but iam not able to send the object id and transaction category. Please help.

I have the same problem!
I bought this phone specifically for this feature and I can't for the life of me get any alert for my Yahoo mail account.
I've downloaded the Yahoo App from the Nokia store and have checked the "activate e-mail alerts" box and that doesn't work.
I've logged into my Yahoo account and tried to connect it that way but there are no options to do so.
I've followed the link on the Yahoo site where they have sent a link to me via text to sync it that way and no joy.
Aaahhhh, its driving me crazy!!!!!
Please help!!!!!!!

Different mail alerts for each email account

Just got the new Verizon iPhone. Used BlackBerry for years. One feature of the BB that I think is missing from the iPhone is the ability to set different mail alerts for each email account. For instance, I would like to turn off alerts for my corporate Exchange account (for which I get 100 emails a day), but receive alerts for my Comcast and Gmail accounts.
Am I correct that there is only one on or off feature for the iPhone for all accounts?

That turns the account off for receiving mail as you provided, which I'm fairly certain the OP is not interested in.
The OP wants to be able to turn the new mail alert sound off for one account while leaving it on for another account while all accounts are still checked for new messages.
For instance, I would like to turn off alerts for my corporate Exchange account (for which I get 100 emails a day), but receive alerts for my Comcast and Gmail accounts.

E-Mail alerts for queues in SMQ2

Hi,
In a asynchronous IDOC->ABAP Proxy scenario, some of the messages are getting stucked in the transaction SMQ2 in PI system.This happens only when we send 100 IDOCs to PI at the same time and only 5-10 messages are getting stucked with status as "Running". The remaining messages are processed and send to the target system.
I would like to know a solution to trigger an E-mail alert to a specific Mail id if any messages gets stuck in the queue for more than 5 minutes.
Do we need to configure CCMS to achieve this? If so, please let me know the steps.
Thanks and Regards,
Sakthi

Hi Just check for
configure E-mail alerts
Configuring scenario specific E-mail alerts in XI-CCMS: Part-2 By Aravindh Prasanna
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2
XI : Configuring CCMS Monitoring for XI- Part I By Naveen Pandrangi
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
XI : GRMG Customizing for XI CCMS Heartbeat Monitoring Part II By Naveen Pandrangi
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Configuring scenario specific E-mail alerts in XI-CCMS: Part 3 by Aravindh Prasanna
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Regards
Abhishek

Archive apply issue for standby database in Standard Edition.

We have setup standby database in Oracle standard edition. the archive log cannot be send by oracle automatically. So we manually send the archive over. But do not see the database apply the archive log file. What could be wrong and where should we check on it?
We also used following when finishing the standby DB after running "recover standby database;" for a few archive log file:
alter database recover managed standby database disconnect from session;
======================================================================================
This is the status:
SQL> select OPEN_MODE, SWITCHOVER# ,REMOTE_ARCHIVE ,ARCHIVELOG_CHANGE#,SWITCHOVER_STATUS, DATABASE_ROLE from v$database;
OPEN_MODE SWITCHOVER# REMOTE_A ARCHIVELOG_CHANGE# SWITCHOVER_STATUS DATABASE_ROLE
MOUNTED 495550636 ENABLED 1.2201E+13 SESSIONS ACTIVE PHYSICAL STANDBY

The DB version is 10.2.0.5
I can do this to apply at standby DB:
SQL> set autorecovery on
SQL> recover standby database;
Then I tried to run this to leave the session:
alter database recover managed standby database disconnect from session;
Do not seen any apply.
=============================
Here is the last lines of alert log:
Errors in file /oracle/admin/cntus/bdump/cntus_mrp0_12389.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u03/cntus/redolog/redo01b.log'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 1 thread 1: '/u02/cntus/redolog/redo01a.log'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Thu Sep 06 15:08:34 EDT 2012
Errors in file /oracle/admin/cntus/bdump/cntus_mrp0_12389.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u03/cntus/redolog/redo01b.log'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 1 thread 1: '/u02/cntus/redolog/redo01a.log'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Clearing online redo logfile 1 /u02/cntus/redolog/redo01a.log
Clearing online log 1 of thread 1 sequence number 10158
Thu Sep 06 15:08:34 EDT 2012
Errors in file /oracle/admin/cntus/bdump/cntus_mrp0_12389.trc:
ORA-00313: open failed for members of log group 1 of thread 1
ORA-00312: online log 1 thread 1: '/u03/cntus/redolog/redo01b.log'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
ORA-00312: online log 1 thread 1: '/u02/cntus/redolog/redo01a.log'
ORA-27037: unable to obtain file status
SVR4 Error: 2: No such file or directory
Additional information: 3
Thu Sep 06 15:08:34 EDT 2012
Errors in file /oracle/admin/cntus/bdump/cntus_mrp0_12389.trc:
ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 1 thread 1: '/u02/cntus/redolog/redo01a.log'
Clearing online redo logfile 1 complete
Media Recovery Waiting for thread 1 sequence 10166
Thu Sep 06 15:08:35 EDT 2012
Completed: alter database recover managed standby database disconnect from session
======
We have the directory /u02/cntus/redolog and /u03/cntus/redolog. But nothing in there. Should we create redo for it? Is this a separate issue?
Thanks!

Incoming messages - E-Mail Alerts for Application Errors?

Dear C4C Community,
We are integrating C4C and our SAP ERP. Sometimes the business partner replication is not working due to unmapped entries or due to other reasons. Currently we are checking the web service message monitor manually for incoming message with status "Application Error".
Is there any way to setup an automatic e-mail alert when new incoming message errors appear? I do not like the manual monitoring process.
Looking forward to your feedback.
Best Regards
Matthias

Hello Matthias,
Try checking the below questions in your project scope.
Hope this should help you achieve what you want.
Regards,
Chandan

Different e-mail alerts for different contacts

Can I have only certain e-mails alert me with a tone and let all others remain silent in iOS5? I use my phone for work and want to assign e-mails from specific people to audibly alert me and let all the rest remain silent so I'm not bothered by unimportant e-mails. My old Blackberry let me do this for years but so far can't get my iPhone to do it. Is this available with iOS5?

How to create custom notification tones in iOS 5
Users of iOS 5 for iPhone, iPad and iPod touch devices can create free custom notification tones
http://www.pcworld.idg.com.au/article/404445/how_create_custom_notification_tone s_ios_5/

Problem on archivelog for standby database

Hi,
I have an RAC architecture on linux in standard edition.
I build a standby database on an other server in standard edition.
I have build my standby database and open in read only but when i do some modifications in my rac i can't apply my archive logs because in
RAC i have the thread notion and the apply give me an error:
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
/db/RSAPRODS/FRA/RSAPROD/archivelog/2011_03_30/thread_1_seq_166.354.747075275
ORA-00325: archived log for thread 2, wrong thread # 1 in header
ORA-00334: archived log:
I don't know how to do to generate an archive log for my standby.
Thanks

$ oerr ora 325
00325, 00000, "archived log for thread %s, wrong thread # %s in header"
// *Cause: The archived log is corrupted or for another thread. Can not
// use the log for applying redo.
// *Action: Find correct archived log.Make sure you have transfered archived redo logs in binary mode if using ftp and that they are not corrupted : you can try to use cksum or md5sum on source archived redo log and on target archived redo log.

Procedure for Standby Database for SAP ERP 6.0

Hello All,
We are using SAP ERP 6.0 with Oracle 10g with AIX 5.3.
We are planning to setup a standby database for our SAP ERP 6.0 production system as part of remote DR site using Oracle Data Guard.
I was under the assumption that i can first install an erp 6.0 (ABAP) system using homogeneous system copy from my erp 6.0 (ABAP) production system and then start configuring oracle dataguard.
But the System Copy Guide "System Copy for SAP Systems Based on SAP NetWeaver 7.0 SR3 ABAP" has mentioned that "You cannot create standby systems with a system copy".
Please suggest the best practise or the procedure for creating standby database for SAP ERP 6.0 system. Iam not looking at the steps for creating a pure oracle 10g standby database, but with SAP instances as well.
Thanks in advance.
CVS

Hi,
Please refer the below mentioned link for configuring data guard.
http://www.stanford.edu/dept/itss/docs/oracle/10g/server.101/b10823/create_ps.htm
Below mentioned are the sequence of stpes, which needs to be followed for setting up data guard.
3.1 Configuring the Primary Database
3.1.1 Enable archiving and define a local archiving destination
3.1.2 Create a password file
3.1.3 Configuring the Oracle networking files
3.1.4 Set initialization parameters on the primary database
3.1.5 Take Offline/Online backup of the primary database
3.1.6 Create a control file for the standby database
3.1.7 Prepare initialization parameter file for the standby database and start the primary database with the changed pfile.
3.1.8 Copy all files from the primary host to the standby host
3.2 Configuring the Standby Database
3.2.1 Configuring the Oracle networking files
3.2.2 Create a INIT parameter file for the standby database
3.2.3 Copy the standby controlfile to the appropriate location
3.2.4 Create Oracle Password File
3.2.5 Start the physical standby database
3.2.6 Initiate log apply services
Regards,
Ranjith

Best way for standby database?

hi,
I heard that DataGuard and Streams are two ways to have a standby database ready in case your normal database fails?
Can someone please share their experience of using either of these so that I can decide which one I should research into?
thanks

I am not very good in streams but whatever little I know , based on that , DG is a block by block copy of the production over the standby making it sure that in the case of the disaster, if you would do failover, there won't be anything that you would be missing. That's why physical standby is the best and if I can say, the only way to do take care of a disaster. Further enabled with Broker, it can be done completely without the dba's intervention which would happen in 20seconds maximumly ( I hope the timing is correct) making it an idle solution for the HA. With 11g enhancements of Active Dataguard and Snapshot Standby, it has really become a useful entity for normal functionality/working of the databases as well.
Streams, on the other hand is a replicaton tool based on some rules that you define. Compared to DG, it can be just a part of the production system which is replicated over the other side. So I won't consider this as an ideal to take care of disasters.
Just my 2 cents.
Happy new year and belated merry Christmas as well :-) .
Aman....

Autorecover for standby database....

Does anyone know if there are plans to allow the autorecover function to apply log files to a standby database without bringing the database online? It would seem like a logical option to have and greatly simplify the management of log files on the standby server.
Alternatively, does anyone have any template scripts (RHEL4) that they could post for applying log files on a standby server. I don't believe in re-inventing the wheel if I don't have to.
Thanks,
George M-A

Hello George,
we are in the same situation of not to re-invent the wheel.
So I used the forum search and some google and found the following link:
http://lists.mysql.com/maxdb/24407
In this thread a script for autorecovering is discussed.
We are now trying to verify the script and to customize it for our environment.
Regards,
Thomas

Force logging at tablespace level for standby database

Hi
Can we create a standby database by enabling force logging at tablespace level instead of enabling it at database level.I want to out the tablespace containing indexes in nologging mode so that when I rebuild the indexes no logs will be generated.

Technically, you can create a Standby without having set FORCELOGGING at the Primary database.
You can also then selectively FORCELOGGING for all your important tablespaces (beginning with SYSTEM, SYSAUX, UNDO ....)
However, for a Physical Standby Redo Apply will mark the blocks (e.g. those populated by the CREATE INDEX .. NOLOGGING) as "corrupt". You will get Read Errors (ORA-1578 and ORA-26040) when you attempt to read the index (e.g. for a Table query).
So you have to monitor your NOLOGGING operations and the datafiles where NOLOGGING is applied. You can take Incremental RMAN Backups of such datafiles and restore them to the Standby immediately after the NOLOGGING operations.
Hemant K Chitale

Initial setup for standby database - doubts ??

Hi,
While creating a physical standby database from a primary database what is the initial setup in case of the standby database which will be created.
1.Is it that I will only install the oracle with no starter database and then continue with the steps for creating standby database.
2. The SID has to be the same for both the database or can it be different.
Waiting for your answer.
sl

1)
Fulfill the prerequisites
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14239/standby.htm#i58150
2) It has to be same.

CCMS MAIL ALERT FOR STANDBY DATABASE

Similar Messages

Maybe you are looking for