CCMS monitoring data collection

Hi,
I have set up CCMS to show alerts for inbound IDOC errors.
This seems to be working correctly, but the status is not being updated when the data collection method is being run. The data collection is set to run once per hour.
best regards,
Jason.

Hello Jason,
the IDOC monitoring functionality in CCMS is somewhat limited and cumbersome to set up via transaction BDMO. Far more sophisticated is the corresponding capability in Business Process Monitoring where you can monitor IDOCs regarding certain status and there it is also possible to monitor with a higher frequncy than just one hour.
More information on IDOC monitoring and other interface monitoring capabilities can be found in the corresponding Setup Guide from Q4/2008 that you find under
https://service.sap.com/bpm --> Media Library --> Technical Information.
Regards
Volker

Similar Messages

IDoc Monitoring: Data collection not getting completed

Hi,
I have setup IDoc monitoring in Solution Manager 7.1 SP08 for managed systems which is on ST-A/PI 01Q. There are many IDoc being generated in the managed system but I am not getting any alert for it.
In the alert inbox I get the message that the data collection has not yet taken place since the last activation. and the last data collection time is shown as of 2009.
Also in the managed system the BPMon background job BPM_DATA_COLLECTION_2 get cancelled with run time error TSV_TNEW_BLOCKS_NO_ROLL_MEMMORY
What can be the issue?
Regards
Vishal

Hi Vishal,
Please check and implement below notes to fix the first issue:
1570282 - Advance Corr. BPMon ST-A/PI 01N
1946940 - ST-A/PI 01Q SP2: Advance Correction BPMon (Infrastructure and
EBO)
1869678 - Advanced Corrections for BPmon/Analytics Delivered with 01Q SP1
(framework)
Thanks
Vikram

Get the CCMS monitoring data to the Java

I want to get the monitoring data from the CCMS/RZ20 transaction to the Java environment. Please tell me what are the possibalities we can do.

Has it ever worked? If it has worked and stopped could be a memory issue that would be fixed with a restart/reset? Is it hanging on one particular item?
http://support.apple.com/kb/HT1430

CCMS: Monitoring data through RFC or Agent?

Hi,
I have a question of understanding:
When I open a monitor on my CEN system (ta RZ20), it starts collecting data from the remote systems.
To do this, the CEN system uses a RFC connection, which has an account and a password from the remote system.
From time to time I have the situation, that this account has been expired.
Then, when opening the monitor in RZ20, I get a Login dialog for that system. I always skip this dialog.
When the monitor finally shows up, in some cases the MTE of the system with the expired account shows up and in some other cases the MTE does not show.
How can the CEN collect monitoring information of the remote system, even if the account that it has to use is locked out? I have systems, where that account has been locked out for several weeks ...(Is the agent sapccm4x used instead?)
Rigas

Hi Yoganand,
thanks a lot for your helpful answer!
I did not know that CEN first calls the sapccm4x agent and only in case of inactivity it uses the RFC based data collection method.
I never could find that info anywhere in the SAP help.
From time to time I have the following situations with a system, who's built-in RFC account has been locked out:
When I open the monitor in RZ20, the login account shows up. I cancel and finally the monitor comes up and the data of this system is included!!
That could be something like a timeout effect: after a certain number of seconds, CEN tries to get data over the RFC in addition to still trying the agent ... and then the agents finally answers and delivers the MTE data (the RFC cannot authenticate and therefore will never deliver anything ... )
Rigas

Tables in CCMS Monitoring

Dears,
We are using ECC 6.04 .
In which we are planning to gererate a report daily that will fetch all CCMS monitoring data to get review of all system Monitoring daily.
For it I need to know the all table names,CCMD use to fetch data.
Please suggest the table names for it.
Regards,
Shivam Mittal

Dears,
We are using ECC 6.04 .
In which we are planning to gererate a report daily that will fetch all CCMS monitoring data to get review of all system Monitoring daily.
For it I need to know the all table names,CCMD use to fetch data.
Please suggest the table names for it.
Regards,
Shivam Mittal

CCMS Data collection

Hi,
I have configured central monitoring in CCMS for all systems.
I have a doubt here that is how the data collection happens for each methods in CCMS for every 5 min?
Is it done using SAP_CCMS_MONI_BATCH_DP, but this job is scheduled every 1hr. How does data collection happens?
I need to know the working concept in detail. I tried seaching in help.sap.com but unable to find. Help me.
Regards,
Dinesh.

Hi *,
Juan's response is accurate. To see the status of the SAP's cyclic control program, execute txn RZ03 --> utilities --> diagnostics --> control/status area.
To run manually execute txn RZ03 --> utilities --> diagnostics --> run sapmssy6.
Hope that helps.
Regards,
Riyaan.

Performance Monitor Remote Data Collection unable to get data

When attempting data collection of a remote Windows 2008 server (Server_B) from another W2k8 server (Server_A) I receive the following error: "When attempting to start the Data Collector Set the following system error occurred: No data to
return."
However remote real-time monitoring of Server_B is no problem. Also, local real-time monitoring and data collection of Server_A is successful.
Is the error due to security restrictions?

Hi Scott,
Would you please let me know whether have administrator rights on the server trying to collect data collector set?
Please type services.msc on RUN. When Services panel opened, please navigate to Performance Logs & Alerts
service and check if it started. Meanwhile, please temporarily disable firewall and monitor the result.
In addition, please refer to following KB and check if can help you.
The Data Collector Set may not start on a computer that is
running Windows Server 2008 or Windows Vista
Performance Monitor data collector set does not collect all
required performance counter data in Windows 7 or in Windows Server 2008 R2
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Monitor the data collection

How can we know if there is no data collected for a server on a specific monitor item/performance rules? Could there be an alert generated if there is no data collection from the server?

First of all, SCOM has no built-in mechanism in keep tracking the functioanality of performance data collection. SCOM agent stores performance data in local data store, c:\porgram file\Microsoft Monitoring Agent\Agent\Health Service State\Health Service
Store\healthserviceStore.edb. Then it will push data into SCOM DB. Once its data is transmitt to SCOM DB, its data is clear. As a result, it is not feasible to recover performance data from the client size.
1) no data collected: Usually, a grey agent under discovered inventory indicates that the agent loss connection to managment server and performance data cannot push into SCOM DB.
2) Database Corrupt: I think that you should recover from your backup and SCOM agent will store its performance locally until the DB is recovery.
Roger

RZ20 CCMS background job monitoring not collecting updated information

System: ECC 6
In RZ20 > background job monitoring, the jobs that I am monitoring show last data collection was on November 30, 2010. However, under "backgroud service" and "background processing servers" data collection shows current date and time. This is on a Production system, and in the QA system this is working correctly.
What could be the cause of the data collection not working for just the background job monitoring?
Edited by: Jayson Parker on Jan 27, 2011 10:13 PM

Monitoring segment needed to be reset to warmup status.

Unable to Data Collection Methods in CCMS/RZ20

Hi gurus,
There are lot of Montoring Objects for which there are no data collection methods already assigned which I am trying to do.
I am able to do method assignments only to data analysis and auto reaction methods but not " data collection " which remains in display only mode even after using the edit option,
Kindly let me know how to proceed.
Regards,
Sandeep.

Hi,
in the past there was the option to change the data supplier. After several customers accidentally entered analysis or auto-reaction methods, the changed that to read-only, because its completely preconfigured - no need to change. And: you cannot know the name of a data supplier to be entered.
NO METHOD does not mean: There is no data supplier. There are a lot of MTEs being refreshed with data, although there is NO METHOD being entered. These MTEs are refreshed by so called active data suppliers - they run independently from the CCMS Moni Infra.
Example: Syslog. Data collection method: NO METHOD. Real data supplier: The SAP kernel, which reports into syslog (when there is something to be reported) and into CCMS in parallel. All changes to that MTE would cause a problem in data supplying.
So please feel free to open a n SAP call, whenever an MTE in CCMS is white (no data), and you are interested in that information. Sometimes we disable data supplying by default - then we can tell you how to enable it.
Best regards
Christoph Nake
PM CCMS

Ccms monitoring single definition under and MTE class

Hi Guys
For CCMS monitoring under RZ20 i am looking for a way to define a node that allow me to monitor a specific definition for those mte that dinamically create those definitions from the source system, for instance
if you select MTE class: filesystem you get the list of all the filesystems, like
/db2/SM1/sapdata1
/db2/SM1/sapdata2
/var
So lets says I just want to monitor /db2/SM1/sapdata1 and not to display the rest of the filesystems on RZ20
is there a way to configure this? maybe using some kind of filter for the name.
I want to configure this for the j2ee connector service but i get a buch of connector Applications RZ20 and I just want to monitor one of those Applications
Thanks for your help.

Thanks for this good document but I think it is not enough for me. I had registered the sapccmsr agent with J2EE option but it is not monitor the database correctly on the same physical server. In the Monitoring node of server process in Visual Admin i can't find a relevant object to activate database free space monitoring. In posted document I can't find the detailed information, too. Please provide me with a detailed specific information. Many thanks.
Which service is relevant to collect database relevant data to monitor non ABAP databases like single J2EE instances oder non-SAP Databases.
Edited by: Rene Schulz on Nov 19, 2008 3:16 PM

CCMS monitoring for SAPconnect based on Error Message Numbers

Hi,
We are trying to use the CCMS monitoring to produce alerts for SAPconnect based specific Error Message Numbers for emails for example, however the monitoring function or data collection method for SAPconnect (BCOMAL_SXDS) does not provide that level of granularity. Has anybody faced this same problem and can provide a recommendation for this?
Thanks,
Javier

Hello,
You can see the message details in SE91.
In FI, you can control the message number in OBA5. Normally message numbers are issued like this
AA165
First two digits (alpha) is called application area next digits are called message number.
Sometimes, you may not be able to see the messages in OBA5, in such case you need to go to OBMSG transaction code and include the message number to your application area, then you need to come to back to OBA5 to make it information / warning / switch off / error (as the case may be)
Regards,
Ravi

File Systems are not shown in CCMS Monitoring

Hi Gurus,
We have installed all SAP components in Solaris 10 zones including Solution Manager.
Solaris File Systems are not shown in CCMS Monitoring under FileSystem. It looks like SAPOSCOL is not sending the OS data to CCMS. It does not show file systems in OS06 also.
The probles exists on Systems runnig in Solaris 10 zones only and NOT on systems running on individual Servers. [without Solaris zones]
Thanks,
Pj

Hi,
You need take some special considerations while installing SOLMAN on SOLARIS 10 zones. Check these notes
Note 870652 - Installation of SAP in a Solaris 10 zone
Note 724713 - parameter settings for Solaris 10
Hope this will solve your problem.
--Ragu

BCS - Data collection issue

Hi,
I'm using BCS 4.0. I'm working now in final testing and I have some question regarding to the data collection process using load from data stream method. I ran the task in consolidation monitor for 007.2007 period and for all companies without any error or warnings, but we have differences in financial information for that period.
I reviewed the content in my BCS cube (RSA1) and we don't have any data for that accounts, the only thing that I found was that all docs were created on same date
I deleted the ID request in RSA1in my BCS cube and I executed task again in consolidation monitor, but the result was the same.
Looking at log / source data, in the rows listed, these data is not taking from the infoprovider
Any idea which could be the problem ?
Thanks
Nayeli

Hi Nayeli,
I had to do this kind of job (reconciliation of data in the source basis cube and the totals cube) during the final testing a lot of times, with an accountant.
The only way to have the first clue what is happening is to compare every particular amount s in both cubes. Comparing and trying to figure out any dependencies in data.
The difference might arise because of ANY reason. Only you may analyze the data and decide what to do.
AFAIU, you compared only reported data and did no currency translation and eliminations?
Then, I'm afraid that you've made a very big mistake deleting the request from the totals cube. You have broken the consistency between totals and document data. For a transactional cube the request is yellow until the number of records in it reach 50000 records. Then it is closed and become green. As you may understand, in those 50000 records maybe contained a lot of data for different posting periods, for example, reported data for the previous closed period. Though, documents still contain eliminations for that period. - Inconsistency.

Too many BPM data collection jobs on backend system

Hi all,
We find about 40,000 data collection jobs running on our ECC6 system, far too many.
We run about 12 solutions, all linked to the same backend ECC6 system. Most probably this is part of the problem. We plan to scale down to 1 solution rather than the country-based approach.
But here we are now, and I have these questions.
1. How can I relate a BPM_DATA_COLLECTION job on ECC6 back to a particular solution ? The job log give me monitor-id, but I can't relate that back to a solution.
2. If I deactivate a solution in the solution overview, does that immediately cancel the data collection for that solution ?
3. In the monitoring schedule on a business process step we sometimes have intervals defined as 5 minutes, sometimes 60. Strange thing is that the drop-down of that field does not always give us the same list of values. Even within a solution I see that in one step I have the choice of a long list of intervals, in the next step in that same business process I can only choose between blank and 5 minutes.
How is this defined ?
Thanks in advance,
Rad.

Hi,
How did you managed to get rid of this issue. i am facing the same.
Thanks,
Manan

CCMS monitoring data collection

Similar Messages

Maybe you are looking for