CCMS: Monitoring data through RFC or Agent?
Hi,
I have a question of understanding:
When I open a monitor on my CEN system (ta RZ20), it starts collecting data from the remote systems.
To do this, the CEN system uses a RFC connection, which has an account and a password from the remote system.
From time to time I have the situation, that this account has been expired.
Then, when opening the monitor in RZ20, I get a Login dialog for that system. I always skip this dialog.
When the monitor finally shows up, in some cases the MTE of the system with the expired account shows up and in some other cases the MTE does not show.
How can the CEN collect monitoring information of the remote system, even if the account that it has to use is locked out? I have systems, where that account has been locked out for several weeks ...(Is the agent sapccm4x used instead?)
Rigas
Hi Yoganand,
thanks a lot for your helpful answer!
I did not know that CEN first calls the sapccm4x agent and only in case of inactivity it uses the RFC based data collection method.
I never could find that info anywhere in the SAP help.
From time to time I have the following situations with a system, who's built-in RFC account has been locked out:
When I open the monitor in RZ20, the login account shows up. I cancel and finally the monitor comes up and the data of this system is included!!
That could be something like a timeout effect: after a certain number of seconds, CEN tries to get data over the RFC in addition to still trying the agent ... and then the agents finally answers and delivers the MTE data (the RFC cannot authenticate and therefore will never deliver anything ... )
Rigas
Similar Messages
-
Get the CCMS monitoring data to the Java
I want to get the monitoring data from the CCMS/RZ20 transaction to the Java environment. Please tell me what are the possibalities we can do.
Has it ever worked? If it has worked and stopped could be a memory issue that would be fixed with a restart/reset? Is it hanging on one particular item?
http://support.apple.com/kb/HT1430 -
CCMS monitoring data collection
Hi,
I have set up CCMS to show alerts for inbound IDOC errors.
This seems to be working correctly, but the status is not being updated when the data collection method is being run. The data collection is set to run once per hour.
best regards,
Jason.Hello Jason,
the IDOC monitoring functionality in CCMS is somewhat limited and cumbersome to set up via transaction BDMO. Far more sophisticated is the corresponding capability in Business Process Monitoring where you can monitor IDOCs regarding certain status and there it is also possible to monitor with a higher frequncy than just one hour.
More information on IDOC monitoring and other interface monitoring capabilities can be found in the corresponding Setup Guide from Q4/2008 that you find under
https://service.sap.com/bpm --> Media Library --> Technical Information.
Regards
Volker -
Hi ABAP gurus,
I have a RFC function module. It brings back data in an internal table from remote system. Now the problem is the data from the remote ststem is very huge, something like 1,00,000 records. So it takes a lot of time and bandwidth. Sometimes the program has to wait really long hous.
Please give me a solution so that the connection failure can be evaded. Because if we wait for 2-3 hours and there is a failure then all data is lost.
ABAPer,
Sonu.Okay one step at a time, what is your RFC doing? Is it logging into an external system's tables and getting the data? Is it calling an external API which in turn gets the data for you?
What Ferry and myself are suggesting is that the external system where the data resides should extract the data and put it on a file. That file needs to be FTPed to your application server. You can write a normal report program that uploads the file into internal table and processes it. Look at OPEN DATASET, CLOSE DATASET and READ DATASET commands.
You can then schedule this program to run periodically to pull the file and process. -
OSB Monitoring data through JMX
Hello,
I would like to know if there is a way to access Proxy and Business Services statistics through JMX. I understand that is possible using the JMX APIs in Java - as in this example [http://docs.oracle.com/cd/E14571_01/doc.1111/e15867/app_jmx_monitoring.htm#CEGFFBFG] but is there a way to obtain the same information using, for instance, JConsole?
I understand that it is not possible.
Thanks
Lucianoit should be a matter of going to the ServerRuntime, then WebAppRuntime, then invoke this method and count the ids:
http://docs.oracle.com/cd/E23549_01/apirefs.1111/e13945/weblogic/management/runtime/WebAppComponentRuntimeMBean.html#getServletSessionsMonitoringIds%28%29
I can't test it right now...no weblogic running around me... -
Dears,
We are using ECC 6.04 .
In which we are planning to gererate a report daily that will fetch all CCMS monitoring data to get review of all system Monitoring daily.
For it I need to know the all table names,CCMD use to fetch data.
Please suggest the table names for it.
Regards,
Shivam MittalDears,
We are using ECC 6.04 .
In which we are planning to gererate a report daily that will fetch all CCMS monitoring data to get review of all system Monitoring daily.
For it I need to know the all table names,CCMD use to fetch data.
Please suggest the table names for it.
Regards,
Shivam Mittal -
RFC issue with TREX CCMS monitoring
Hello,
I have a TREX 7.10 instance (running on a Windows Server) and a SAP Solution Manager System 7.01 (on Unix Server) which is used as central CCMS monitoring system.
I have configured CCMS Monitoring for TREX according to the pdf document that is attached to SAP note 897226 ('Monitoring TREX with CCMS. Alerting seems to work, the autoreaction method that I defined for e.g. unavailabitlity of TREX processes is triggered when I test it.
In SolMan system, transaction RZ21, agents for remote systems, I see that the agent for the TREX instance is in status 'Online'.
But when I highlight this agent and click on the button 'Test Connection' I get 'Error when opening an RFC connection'.
In TA SM59 of SolMan system I am doing connection check for the two TCP/IP RFC destination related with that TREX instance
N3STAT.<hostname>.<Nr> and
SAPCCMSR.<hostname>.<Nr>
For both I get the error 'program <hostname>.n3stat.<Nr> not registered' respectively 'program <hostname>.sapccmsr.<Nr> not registered'
I am a little bit confused how to fix this. Can somebody help ?In the meantime I could solve the issue.
The solution is that the registration command on TREX host had wrong parameters.
I only have a pure TREX instance, no ABAP instance, no Java instance on the same host.
In this case you have to register your agent at central SolMan system this way:
sapccmsr -R pf=
Don´t use the -j2ee parameter if you don´t have a java instance there.
Please see the screenshot and the legend under:
http://help.sap.com/saphelp_nw70ehp2/helpdata/en/e2/eff640fa4b8631e10000000a1550b0/frameset.htm -
Monitoring data sent/received through any port
Is there any software that allows one to monitor data that is being sent from or received by the computer through any/all active connection(s)?
Though a bit of detail as to what was being sent or received, and through what, would be desireable, even raw hex would be helpful.tcpdump allows you to dump all network traffic to a file. That is, if your hard drive can keep up!
Wireshark can do this, too -- and it'll also present parsed traffic in human-readable form. (Wireshark is the successor to Ethereal.) -
Send data to ECC table through RFC Call function from SAP B1 via b1if
Hi,
I have created scenario in B1if which triggers from SAP B1, now I have to send this data in to ECC table, so I have created scenario for that with inbound SAP B1, outbound void and in process RFC Call atom is there but I am not getting data in receiver and also how to write xml to send data in RFC function. Function for RFC has configured from ECC end and have access of that function.
So please help me to send data to ECC table through RFC Call function from SAP B1 (9.0) via b1if
ThanksSolved by my own.
-
How to monitor Data downloaded, bandwidth used, Url hit in Client machine through SCOM
Hi,
Is there is any way which can monitor Data downloaded, bandwidth used, Url hit in Client machine(windows 7 and Windows 8.1) through SCOM.adawson wrote:
Hi,
I installed and running ebusiness suite 12.1.1 in Oracle Linux server 6.3, below is the url I used to run ebs in the Linux Server,
http://aserver.localdomain:8000/OA_HTML/AppsLogin
Can you access this URL on the server itself? Do you see the login page on the server?
I need to access the ebs from my laptop which is having windows 7 operating system.
My laptop (with IP Address 10.0.0.4) is connected to network and I can ping with my linux server's IP Address- 10.0.0.2 (ping 10.0.0.2 works)
but when I ping from my laptop with the server 's hostname ( ping aserver.localdomain) it says "ping request could not find host aserver.localdomain" .What if you access http://10.0.0.2/OA_HTML/AppsLogin from the client, can you see the main login page then?
when I tried to access the url "http://aserver.localdomain:8000/OA_HTML/AppsLogin" from the laptop ebs page is not opening.
Please post the contents of the hosts file on the server and the client.
Is there any configuration to be made in Linux server where ebs is installed or tell me what things to be done to access ebs from another system.Just make sure the firewall is disabled on the Linux server.
I also have static ip configured in my router, So tell me what settings to be made to access this same ebs through internet.You do not need an internet access here since your server and client on the same network.
Thanks,
Hussein -
Pulling Data from r/3 to BW through RFC connection
Hi Experts,
We have a requirement of replicating a custom report in R/3 in BW..
I have heard that we can pull the direct report from R/3 through RFC.
Could you please help me with regards to this.
Thanks in Advance ..This functionality is made with a "Remote cube".
You need to define a particular cube based on the RFC.
More info on how to...
http://help.sap.com/saphelp_nw04/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm -
Monitoring users through the CCMS
Is there some transaction to access directly some area from CCMS to monitor the memory´s consumption of each user on the environment???
Thanks.Hi Carlos,
By standard, we don't have, we need to build the custom one
CCMS Monitoring: Solution for Extended Memory Average Monitor for the Server Instances in a Given System
or you can just use SM04-> select users Goto memory
Thanks
Jansi -
CCMS monitoring a remote server on a ditributed system that is not an R3 in
CCMS monitoring of a remote server using RFC-SAPOSCOL on a distributed system that is not an R3 install but just an DB server. Has anyone any idea how to set this up? I've read SAP note that refer to it and where to download the files but nothing on how to set it up.
Sorry to make that clear we have a distributed system with a SAP CI on one server and a SQL DB on the other. I would like to monitor the os through CCMS on the DB server.
Message was edited by:
Chris Soden
Message was edited by:
Chris SodenThanks Gary,
I haven't seen this no where would I find it. Had a quick look on the market place and can't find it!
Chris
Just to add were using Netweaver 2004s
Message was edited by:
Chris Soden -
Ccms monitoring single definition under and MTE class
Hi Guys
For CCMS monitoring under RZ20 i am looking for a way to define a node that allow me to monitor a specific definition for those mte that dinamically create those definitions from the source system, for instance
if you select MTE class: filesystem you get the list of all the filesystems, like
/db2/SM1/sapdata1
/db2/SM1/sapdata2
/var
So lets says I just want to monitor /db2/SM1/sapdata1 and not to display the rest of the filesystems on RZ20
is there a way to configure this? maybe using some kind of filter for the name.
I want to configure this for the j2ee connector service but i get a buch of connector Applications RZ20 and I just want to monitor one of those Applications
Thanks for your help.Thanks for this good document but I think it is not enough for me. I had registered the sapccmsr agent with J2EE option but it is not monitor the database correctly on the same physical server. In the Monitoring node of server process in Visual Admin i can't find a relevant object to activate database free space monitoring. In posted document I can't find the detailed information, too. Please provide me with a detailed specific information. Many thanks.
Which service is relevant to collect database relevant data to monitor non ABAP databases like single J2EE instances oder non-SAP Databases.
Edited by: Rene Schulz on Nov 19, 2008 3:16 PM -
CCMS Monitoring of Java Engine
Hi Guys and Girls,
I have configured a central system for CCMS monitoring.
I am able to see the paramters for abap part.
I have uploaded a J2ee scenario and it is running in GRMG Tcode. I have also activated ccms service in SICF.
But i am unable to see my java server nodes in RZ20 -> j2ee template monitor set.
The j2ee template looks like this.
Allsystem
-> <SID>
|
-> J2EE Engine
-> J2EE Applications
-> J2EE Logfiles
+-> CCMS Selfmonitoring
+ ->Operating System
I can see parameter details for CCMS Selfmonitoring and Operating System.
But J2EE Engine, Applications and Logfiles and just there with no sub nodes.
am i missing some setting. Request your help on this.
Thanks and Regards,
RaghavanHi Raghavan,
Can you please check the note 1065754 as this can cause similar problems to what you have. Can you also check the following
CCMSPING is able to monitor if a system is accessible and if the instances are up and running (ABAP and JAVA instances)
GRMG is able to monitor if a HTTP application is up and running.
You have to install the SAPCCMSR agent to view the J2EE monitor information via the RZ20 transaction in the ABAP system
You have to install SAPCCM4X agents, to improve the CCMS monitor concept or for additional monitor functionality like using central auto-reaction methods or log file monitoring.
The J2EE availability didn't work because the old CCMSPING functionality was still used. All the systems in the availability configuration in the transaction RZ21 may be using the RFC destination "CCMS_SYSTEM_PING_
Can you change this to the new agent.
And after this please re-initialized the whole availability structure by executing the function module
SCSM_AVAILABILITY_STARTUP_METH one time manually in the transaction SE37 and activate the new CCMSPING technology in your system.
First of all I think the problem is related to the availability and you don't need the sapccm4x agent or sapccmsr to have the availability alerts in RZ20. If you want to extend this functionality, let's say
you want to get email alerts whenever one of your system is down you should install the sapccm4x agent for ABAP or sapccmsr for non-ABAP.
We have to focus only on ccmsping at this stage.
The ccmsping program (agent) only exists as Non-Unicode version and is able to work with Unicode and Non-Unicode instances.After registering the ccmsping agent it is necessary to restart the instance (or at least to reset the monitoring segment into warmup status) so the startup method for availability monitoring is able to
determine if there is an agent running registered with push option or not, because in this case other function modules have to be used.
Once check whether ccmsping is working fine?
If you get the error message when you check ccmsping like Message No. RA100
This message means 'Neither instance nor logon groups found' and it means that the ccmsping registration wasn't successfull.
its better to register with the newest version of ccmsping as per note 1013331 CCMS agents and kernel: Patches 2007
Also PLease review the Note 1065754
I hope the above helps you.
Thanks & Regards,
Pradeep Srigiri
Maybe you are looking for
-
Swing applet view problem in IE
Hi, I am new to Java and have to develop a web enabled tool where the servlets in my Solaris-Tomcat web server is manipulating with data in an oracle database. The client code is on Swing Applet, which is to be opened in Internet Explorer 5.5 from Wi
-
Blocking an Invoice for Tolerence Key BR (Percenatge OPUn variance)
Hi Gurus, I am testing a new scenario in Invoice Tolerence Limits. I need to create a scenario for Invoice getting blocked due to tolerence key "BR". I am able to block the invoices but i am not sure that it is getting blocked due to the tolerence ke
-
Using airport Express on a hotel ethernet to create a wireless network
Hi there, yesterday I bought an airport express as I was lead to beleive it was the perfect device and simple to set up with regards to creating a wireless network from a ethernet connection in a hotel room. I seem to get a green light and seem to aq
-
Lion... Seems to be slowing my iMac Down? Tips and Tricks?
Hey everyone, this is my first post so go easy on me I installed lion as soon as it came out. I'm really impressed so far, loving the new features (except my inverted mouse, that had to be changed pretty sharpish). My only problem is, is that it seem
-
Cannot use system rollback segment for non-system tablespace 'TEMP
Hi everyone! I encountered this error: "Cannot use system rollback segment for non-system tablespace 'TEMP" So this is what I did to check if the undo stuffs are online. SQL> select tablespace_name,status from dba_tablespaces; TABLESPACE_NAME