CCMS monitoring for CIF-queues

Hello,
we would like to monitor the number of queue entries in the qRFC in/outbound queues (smq1/smq2). The number of queue entries should be checked every 15 minutes.
We then would like to store the data in the central performance history to get some kind of a load profile for the queues.
We could not find a data collector in the ccms or st03n.
Do you know if there is something available to solve the issue?
Thanks in advance,
Matthias

Hi Matthias,
The smq1/smq2 entries changes randomly. So the work around can be
Schedule report RSTRFCM1 for smq1 & RSTRFCM3 for smq2 after every 15mins.
Then from sm37 for those job --> spool tab
In this you can get Display of Queue entries.
Award Points if helpful

Similar Messages

  • CCMS monitoring for adapter engine

    Hi,
    We have configured CCMS monitoring for Adapter Engine for our client.
    In RZ20 im able to see the alerts come up,with the default data that the system provides.
    1. I need to send  a mail when the alert is triggerred, but if I try to set the autoreaction method, it is greyed out and I get a info saying that the adpter engine node cannot be changed.  How do I get over this?
    2. Incase im able to set the autoreaction method , I want to send additional information like communication channel name etc in the alert message. How can I change the text in the alert email?
    Thanks
    Shakthi

    Hello!
    Please check the blog entry below
    Configuration for forwarding Alerts as Emails
    Configuration for forwarding Alerts as Emails

  • CCMS monitoring for Queues(SMQ1/SMQ2)

    Hi,
    How do we monitor Queues(SMQ1/SMQ2) in CCMS. My requirement is to monitor Queues(SMQ1/SMQ2) in CCMS based on the Queue name. I want to create different nodes in CCMS and I want queue name falling under certain criteria should come and sit in the respective node of CCMS.
    Means queue with name High_priority should come n sit under node say Test1, queue name with medium_priority should come n sit under node say Test2 and queue name with medium_priority should come n sit under node say Test3.
    Is it possible to do so.

    Hello,
    also for queue monitoring the easier and more flexible way to monitor is via Business Process Monitoring. The configuration is easier than CCMS where you have to use transaction RZ21 and need to transport objects. And the qRFC monitoring is more flexible than in the CCMS. Basically all customers knowing both standard CCMS qRFC monitoring and qRFC monitoring in BPMon chose the later or exchange their existing CCMS monitoring by BPMon.
    See also the SDN blog /people/johannes.fleig/blog/2008/06/11/new-business-process-monitoring-functionalities-in-sap-solution-manager-150-qrfc-monitoring
    and check out the Interface Monitoring Setup Guide under http://service.sap.com/bpm > Media Library > Technical Information.
    Best Regards
    Volker
    Edited by: Volker von Gloeden on Jul 2, 2010 4:48 PM

  • CCMS monitoring for SAPconnect based on Error Message Numbers

    Hi,
    We are trying to use the CCMS monitoring to produce alerts for SAPconnect based specific Error Message Numbers for emails for example, however the monitoring function or data collection method for SAPconnect (BCOMAL_SXDS) does not provide that level of granularity.  Has anybody faced this same problem and can provide a recommendation for this?
    Thanks,
    Javier

    Hello,
    You can see the message details in SE91.
    In FI, you can control the message number in OBA5. Normally message numbers are issued like this
    AA165
    First two digits (alpha) is called application area next digits are called message number.
    Sometimes, you may not be able to see the messages in OBA5, in such case you need to go to OBMSG transaction code and include the message number to your application area, then you need to come to back to OBA5 to make it information / warning / switch off / error (as the case may be)
    Regards,
    Ravi

  • CCMS Monitoring for specific tcodes

    Hello All,
    Hope someone can help me out. I have a list of tcodes for a daily check which are:
    SM21
    ST22
    SM37
    SM50
    DB02
    I have configured CCMS correctly and its working to send out alerts via email but only for ST22. I can't seem to find the right MTE class to use for any of the rest listed above. Does anyone know which class I should be using or point me in the direction of how to include these?
    Any help would be greatly appreciated
    Thanks
    Stephanie

    Hi Faisal,
    Here's an approach to answering the question "does CCMS monitor X".  It's not perfect but it will help you find a starting point:
    - think of what you want to monitor, not in terms of transaction codes ("how do I monitor transaction SM13") but in terms of the functionality you want to monitor ("how do I detect failed updates?")
    - in RZ20, open  SAP CCMS Technical Expert Monitors -->  All Monitoring Contexts. 
    - Expand the whole tree with the "Expand all" button.  This will show you the entire tree of everything that is currently monitored in your system
    - do a text search of the tree for useful keywords (for example "Update").  In this case you will find several possibilities including AbapErrorInUpdate, which I think is the one that you want
    - highlight the node and press Properties to get the MTE class, in this case R3AbapErrorInUpdate
    There is no exhaustive list anywhere that I can find, that lists every possible thing that CCMS monitors.  But the approach above will catch most scenarios.  You will come up short in a few scenarios where optional monitoring components are not enabled by default (for example, SAPConnect monitors). 
    Also be forewarned that often CCMS will not monitor exactly what you want, and you'll have to find ways to monitor around the edges of your true intention.  For example, there is no monitor for determining if a background job ran between midnight and 02:00, but you can monitor delay and runtime which can come close to what you want.  Part of the art of CCMS monitoring is finding the right combination of monitors that come closest to achieving your objective.
    Good luck and happy monitoring,
    Jon

  • CCMS monitoring for DB2/400 database backup.

    Hi,
    sap on iseries experts,
    We need a good monitoring for the alerts from DB2/400 database backup failure with CCMS for a solution manager management.
    Actually I don,t see a specific node (or MTE class) inside CCMS for this alert;
    But DB12 display well the daily backup status . . . . . . . .
    Can anybody help me ?
    Kind Regards
    Fabio

    Hi all,
    I'm searching also for such an possibilty.
    When running Oracle there is following MTE:
    RZ20 -> SAP CCMS Technical Expert Monitors -> All Monitoring Contexts -> Oracle -> Backup/restore -> Backup status -> Last succ
    Does anybody know a method to monitor the backup with SAP on Iseries?
    Tobias

  • CCMS Alert for Stuck Queue

    Hi
    I want to setup alert for any ABAP Dump or any Failed XML Message.
    Requirement is that it should come to me as an email like:
    System:SID
    Client:xxx
    Text:a brief description of the Dump or XML message
    I have setup CCMS and GRMG but I am receiving mails regarding GRMG Heartbeats only and not related to other CCMS alerts.
    I have seen the weblogs available in the SDN.
    Thanks in advance

    Hello Sundara
    You can setup CCMS for J2EE in the following ways
    1. Setup system monitoring in DSWP as you do for ABAP systems
    2. Installing and Registering sapccmsr agents
    3. Availability Monitoing by GRMG Lite and GRMG
    4. Setting up Central Autoreaction
    5. E2E analysis (Solution Manager Diagonostic)
    Four options are excellently elaborated in the following link
    Setting Up your Central Monitoring [original link is broken]
    and E2E
    http://service.sap.com/diagnostics
    If you face any problem in any of these, revert back
    thanks
    Bhudev

  • CCMS Monitoring for Average HTTP response time

    Hi guys ,
    Is it possible to monitor Av. response time for HTTP(this is based on ST03) using CCMS ?
    Thanks in advance
    George

    hi
    As per my understanding you tried to view the responsetime comp as same like in sto3 by ccms, the way as below, RZ20-> SAP CCMS montior templates- >Entiresystem-><sid>->application server -><server>R3 services ->  DIalog you can get all the response time as same in the ST03.
    else in otherway if you looking for monitoring Java and webdynpro, you can do this by GRMG.chk this for to knw http://help.sap.com/saphelp_nwpi71/helpdata/en/45/4ee37fea5917eae10000000a155369/content.htm|http://help.sap.com/saphelp_nwpi71/helpdata/en/45/4ee37fea5917eae10000000a155369/content.htm]
    for configuration,[GRMG-config guide|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/106a4d88-2a36-2c10-549b-dc549d00b8b9?quicklink=index&overridelayout=true]
    chk and update
    jansi

  • CCMS Monitor for SMTP-Service via ICM SMTP-Plugin

    Dear all,
    we configured our SAP System for sending emails with the help of transaction SCOT. We are using the SMTP-Plugin brought in by the ICM. Everything works fine. Now we want to report how many emails are sent through that connection. For that we want to connect the SMTP-Plugin to the CCMS. Since I havn't found any documentation of that (the existing documentation is discussing how to configure an ordinary SCOT connection for CCMS), I'd like to ask somebody for help. 
    thanks in advance
    best regards
        Thomas Wetzler

    http://www.spamhaus.org says:
    Mail servers only run spam filters such as Spamhaus PBL on port 25, so if you find you are being blocked by the PBL when you try to send mail to your mail server that means you are not communicating with the mail server on the 'authenticated' port 587 but you're still on port 25. This means your 'SMTP Authentication' is not working correctly.
    http://wiki.gandi.net/en/mail/standard-settings#smtp-account says:
    SMTP Account
    Name server : mail.gandi.net
    Port : 25, 465 (with SSL) or 587 (try one or the other)
    TLS or SSL: yes
    SMTP Authentication : yes, using the same settings as for the POP / IMAP account
    I was trying to use the same settings I have used for several years with Thunderbird and Apple Mail, ie SSL on port 465.
    Is there something wrong with my settings which could be preventing mailx from using port 465?
    A few debug tips would be appreciated.
    Your link causes me to ask:  Does the mailx on Leopard support SMTP directly?

  • Missing "SAP XI Adapter engine" in CCMS Monitor

    Dear all,
    we try to configure PI CCMS monitor but we can't find the subtree "SAP XI Adapter engine " in Visual admin.
    In detail:
    the subtree "SAP XI Adapter engine "is not displayed in Visual administrato under
    server->service->monitoring->Monitor tree ->Root application .
    So we have set to true the value "CCMSEnabled" of seervice "SAP XI AF core" , and we have restarted the instance.
    After the restart i DO NOT find the "SAP XI Adapter engine " in
    SAP NetWeaver Administrator,
    'System  Management' -> 'Monitoring' -> 'Java System Reports' -> 'Reports'. From the dropdown list 'Report' choose 'Monitor Browser', and display all monitors
    So I can't activate the monitor.
    and if the subtree is not present , i can't see the MTE in "SAP XI Adapter engine " RZ20.
    Additional info:
    - In RZ20 I have my system under SAP J2ee Monitor template->All system
    but the MTE "J2EE Applications" is grayed.
    - In file application.xml under /usr/sap/ccms/XIT_10/j2ee<server0> i do not find the tag:
    <app name="application sap.com/com.sap.aii.af.app">
        <node>\XIT\XIT 10 Appl .... sp30t0\SAP XI Adapter Engine</node>
      </app>
    I think this is the correct procedure that we have done in other different landscape whithout problems.
    Is there something else to check ?
    I've alredy checked following Blogs
    /people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
    /people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
    Thanks in advance
    Steven

    Hi Sekhar,
    I am using PI 7.0 instead so I have followed the instruction in (http://help.sap.com/saphelp_nw70/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm) instead.
    The problem is, Adapter Engine is still not listed as one of the application avaialble for Monitoring in Visual Admin even though the SAP XI AF Core has definitely been set with CCMSEnabled = true.
    Any further suggestions?
    Thanks,
    Wi

  • CCMS monitoring of SRM's own XI integration engine

    I have CCMS problems when monitoring XI integration engine of a SRM system. The integration engine will not appear in CCMS. I opened a question on SRM solution forum, could somebody have a look at it there. Here is the link to original question and earn your points there:
    CCMS monitoring of SRM's own XI integration engine
    background: I have previously managed to successfully set up CCMS monitoring for a plain XI system, but there seem to be some difference while SRM's XI only has integration engine and not J2EE engine running. SRM XI Integration engine is in place due to ABAP Proxies used by SRM.
    best regards,
    Kimmo

    You have to follow the note <a href="https://websmp110.sap-ag.de/~form/handler?_APP=00200682500000002442&_EVENT=DISPLAY&_OBJECT=012006153200000552232003&_NNUM=634771&_NLANG=EN">634771</a>
    and following this document <a href="https://websmp110.sap-ag.de/~sapdownload/011000358700004422742005E/XIMonitoringHowTo_01aSR.pdf">How To Monitor Exchange Infrastructure 3.0</a> pay attention to page 34, for the use of a Central Monitoring (CEN) System.
    Of course you have to adjust the GRMG in order to have only the ABAP part under monitor.
    Best Regards

  • CCMS Activation for SAP XI

    Hi SAP XI experts!
    I implemented a simple File to IDOC scenario with SAP XI 7.0 for SAP ECC 6.0 system.
    Now I set up Business Process Monitoring within SAP Solution Manager.
    There I can monitor the Interface Monitoring.
    Here I am able to give Application Monitor, CCMS Monitor,  Analyse & Monitoring Tools, Monitoring Activities.
    Question:
    What are the steps to activate CCMS monitoring for SAP XI?
    What is the CCMS path to monitor the XI messages from SXI_MONITOR?
    Thank you very much!
    regards
    Holger Thomasson

    Hi!
    Many thanks!
    I mean how can monitor the following issues?
    a) on XI side: tcode SXI_MONITOR
    Are there some undelivered messages?
    b) on SAP ERB sind: tcode BD87
    Are there some IDOC that have the status other than "green"
    Thank you!
    regards

  • CIF Queue naming

    Hi,
    Can anyone guide me to any link where I could find the naming conventions for CIF queues (Like CFSTK* = Stocks queue, CFSLS* = Sales Orders queue etc..)
    Ashutosh Kulkarni

    Hi Ashutosh,
    Here are few of them with naming convention:
    Initial Data Transfer          CF_ADC_LOA
    Stocks                         CFSTK*
    Purchase Orders and Purchase R CFPO*
    Planned Orders/Production Orde CFPLO*
    Sales Orders                   CFSLS*
    Manual Reservations            CFRSV*
    Confirmations                  CFCNF*
    Planned Independent Requiremen CFPIR*
    Requirements Reduction of Plan CFMAT*
    Production Campaigns           CFPCM*
    Master Data for Classes        CFCLA*
    Master Data for Characteristic CFCHR*
    Shipments                      CFSHP*
    Planning Tables                CFCUVT*
    Hope this is what you require?
    Pramod

  • CCMS monitoring

    Hello,
    We want to configure CCMS monitoring for one our systems.
    But we don't want to configure CEN using Solution manager.
    After searching, I found that every source describes the process for configuring CCMS using CEN.
    I know that we can configure CCMS on individual systems also. But I am unable to find the right set of steps for it.
    Any help would be appreciated.
    Thanks.

    To configure CCMS on the single system (not as CEN) Please follow the steps below.
    1. Got to RZ20
    2. Select "SAP CCMS Monitor Templates"
    3. Drill down the MTE which you need to monitor and select that.
    like to monitor table space:
         SAP CCMS Monitor Templates->Database->Oracle->Space Management-> table space name->used space
    4. click on properties
    5. assign the autoreaction method which you already copied from  CCMS_OnAlert_Email
    you would need to provide the info in autoreaction method before assigning it to any MTE like email distribution list, sender user id and releasing this method as autoreaction.
    Email distribution list should be created in SBWP in client 000, send user id should also be created in client 000 and email should be configured in client 000 under SCOT transaction for auto reaction method working properly.
    Thanks,
    Best Regards,
    Prabhat Sharma

  • RFC issue with TREX CCMS monitoring

    Hello,
    I have a TREX 7.10 instance (running on a Windows Server) and a SAP Solution Manager System 7.01 (on Unix Server) which is used as central CCMS monitoring system.
    I have configured CCMS Monitoring for TREX according to the pdf document that is attached to SAP note 897226 ('Monitoring TREX with CCMS. Alerting seems to work, the autoreaction method that I defined for e.g. unavailabitlity of TREX processes is triggered when I test it.
    In SolMan system, transaction RZ21, agents for remote systems,  I see that the agent for the TREX instance is in status 'Online'.
    But when I highlight this agent and click on the button 'Test Connection' I get  'Error when opening an RFC connection'.
    In TA SM59 of SolMan system I am doing connection check for the two TCP/IP RFC destination related with that TREX instance
    N3STAT.<hostname>.<Nr>   and
    SAPCCMSR.<hostname>.<Nr>
    For both I get the error 'program <hostname>.n3stat.<Nr> not registered' respectively 'program <hostname>.sapccmsr.<Nr> not registered'
    I am a little bit confused how to fix this. Can somebody help ?

    In the meantime I could solve the issue.
    The solution is that the registration command on TREX host had wrong parameters.
    I only have a pure TREX instance, no ABAP instance, no Java instance on the same host.
    In this case you have to register your agent at central SolMan system this way:
    sapccmsr -R pf=
    Don´t use the -j2ee parameter if you don´t have a java instance there.
    Please see the screenshot and the legend under:
    http://help.sap.com/saphelp_nw70ehp2/helpdata/en/e2/eff640fa4b8631e10000000a1550b0/frameset.htm

Maybe you are looking for