CCMS monitoring of SRM's own XI integration engine

I have CCMS problems when monitoring XI integration engine of a SRM system. The integration engine will not appear in CCMS. I opened a question on SRM solution forum, could somebody have a look at it there. Here is the link to original question and earn your points there:
CCMS monitoring of SRM's own XI integration engine
background: I have previously managed to successfully set up CCMS monitoring for a plain XI system, but there seem to be some difference while SRM's XI only has integration engine and not J2EE engine running. SRM XI Integration engine is in place due to ABAP Proxies used by SRM.
best regards,
Kimmo

You have to follow the note <a href="https://websmp110.sap-ag.de/~form/handler?_APP=00200682500000002442&_EVENT=DISPLAY&_OBJECT=012006153200000552232003&_NNUM=634771&_NLANG=EN">634771</a>
and following this document <a href="https://websmp110.sap-ag.de/~sapdownload/011000358700004422742005E/XIMonitoringHowTo_01aSR.pdf">How To Monitor Exchange Infrastructure 3.0</a> pay attention to page 34, for the use of a Central Monitoring (CEN) System.
Of course you have to adjust the GRMG in order to have only the ABAP part under monitor.
Best Regards

Similar Messages

CCMS monitor, BPE is red

In CCMS monitoring RZ20, the node XI_system Business Process Engine -> Overall status -> Status of the automatic customizing is red. The text is BPE customizing not fully maintained.
When clicking this text, an information page is shown, and you can go directly to Automatic Workflow Customizing to Perform Automatic Workflow Customizing. Here, all the steps are green! A few days ago I had to manually execute the job scheduling for Packaging and Reorganization. They where grey before I did this. But now, they are all green.
So why is the status red in the CCMS monitoring?
BTW: The nodes Runtime -> Process scheduling -> Status of automatic clean up and Status of container definition buffer are also red!
Anyone with a suggestion of what the problem could be?
Edited by: Rune Johansen on Aug 19, 2008 2:39 PM
Edited by: Rune Johansen on Aug 19, 2008 2:41 PM

Hey Rune, how are you dude... long time no hear.. how are those shoelaces.
Let me just get your issue straight... your issue is in the CCMS monitor itself?
Becuase two things here:
1: I am sure there are two views... as in one with current alerts and one with previous alerts. (Open Alerts and Current Status). Check which one you are in...
2: When an error is solved I think you have to update it manually...
I am just taking a stab at this since it is a while since I last worked with CCMS...
Could any of these be your issue?
Edited by: Alex on Aug 19, 2008 4:05 PM

Set up own CCMS monitor sets

Hello!
I would to set up my own CCMS monitor sets in Tcode RZ20, in order to monitor some specific DB actions or SGEN, etc.
Can some one give me some technical information how to do this?
Thank you very much!
Regards
Thom

Hi Thom,
You'll find all info needed here,
http://help.sap.com/saphelp_nw04s/helpdata/en/49/6272376d3bfa2be10000009b38f8cf/frameset.htm
Regards
Juan
Please reward with points if helpful

Activate CCMS for SAP SRM with SAP DB

Hi!
I would like to monitor SAP SRM 5.0 (OS: Windows, DB: SAP DB, Version 7.6.04.11) from SAP Solution Manager.
I have the following problems:
a) it is not posible to execute the tocde DB50 on SAP SRM.
b) it is not possible to see the DB monitor of SAP SRM in SAP Solution
(SAP CCMS Monitor Templates --> Database --> empty)
c)The database is integrated in tcode DB59.
Unfortunately when I execute the connection test I get:
General Connection Data
Connection Name....: SRM
Database Name......: SRM
Database Server....: olda8002
tp Profiles........: no_longer_used
DBM User...........: CONTROL
Test Scope
1. Execute an external operating system command (DBMCLI)
2. Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
3. Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode)
4. Test the SQL connection (Native SQL at CON_NAME)
Application Server: olda8002_SRM_00 (Windows NT)
1. Connect. test with "dbmcli db_state"
Successful
2. Connect. test with command mode "dbmrfc db_state"
Unsuccessful      system_failure
Name and Server     : SRM - olda8002
DBMRFC Function     : DBM_EXECUTE
Command             : db_state
Error               : System Error
Error Message       : timeout during allocate / CPIC-CALL:
'ThSAPCMRCV' : cmRc=20 thRc=456#Timeout during connection setup
3. Connect. test with session mode "dbmrfc db_state"
Unsuccessful
communication_failure
Name and Server     : SRM - olda8002
   DBMRFC Function     : DBM_CONNECT
   Error               : Communication Error
   Error Message       : Error when opening an RFC connection
   4. Connect. test with "native SQL" ( SRM )
Successful
What I have done:
I have upgraded the server as well the client software to the version 7.6.04.11
Can someone help me with suggestion?
Could it be the issue with independent path on windows or do I miss some programs?
In tcode DB59 in Connection test the following values could not be determined:
DBMRFC Release (empty)
DBMCLI Release (empty)
Thank you
regards
Thom

Hello Thom,
"a) it is not possible to execute the tocde DB50 on SAP SRM."
-> Run /ndb50n with the database connection SRM created in /ndb59.
     Please give more details about errors.
"b) it is not possible to see the DB monitor of SAP SRM in SAP Solution
(SAP CCMS Monitor Templates --> Database --> empty)"
-> First fix the database connection in /ndb59.
    Please let me know the version/SP of the SAP Basis on SAP Solution Manager system.
"c)The database is integrated in tcode DB59."??
You posted that you created the database connection for the database.
On the application server < Application Server: olda8002_SRM_00 > run ::
/nsm49 ->dbmrfc -> execute -> post results
/nsm59 -> SRM connection -> test connection ->
1) What are DBSL Release/DBSL Patch on the appl. Server?
2) Update with output from the /nsm49 -> dbmcli tool ::
       dbmcli -s dbm_getpath IndepProgPath
3) Check that Path env. Variable of the srmadm on olda8002 adjusted with
    <IndepProgPath>/bin & <IndepProgPath>/pgm
4) Test TCP/IP connections in /nsm59::
     SAPDB_DBM                        SAP DB dbmrfc server
    SAPDB_DBM_DAEMON                 SAP DB dbmrfc server daemon
< According your information the test connection in /ndb59 failed for :
    Determine status using TCP/IP connection SAPDB_DBM (DBMRFC
command mode)
   & Determine status using TCP/IP connection SAPDB_DBM_DAEMON (DBMRFC
session mode) >
   Run /ndb59 -> Connection test -> select the appl. Server -> Connection test
=> /nst11 && check errors in dev_rd at the end.
    /nsm21 -> check the system errors.
    /nst11 -> check the errors in the corresponding dev log of WP.
   Do you have blank space in the IndepProgPath path name?
Thank you and best regards, Natalia Khlopina

Cannot see CCMS Monitor Templates - System is not configured

I just finished installing SAP Netweaver Trial, and I have been able to login using the SAP* and DDIC accounts.
I can see the standard tree via the SAP client GUI.
I am trying to take a look at the CCMS Monitor Sets, and I can see the standard collection of "Entire System", "Performance Overview", etc. all fine.
However, when I double-click to load any of the monitors, I see nothing inside.
No sub-trees, nothing.
I enabled "Display error nodes" and see a node that says
"NSP : System is not configured"
I have tried creating my own user, adding in profiles like SAP_ALL, S_A.System, etc.
I also notice everytime I access the CCMS Monitor Templates, there is an entry in the Syslog:
Severity: Warning
Process Type: D0
Transaction Code: RZ20
Client: 001
User: DDIC
Message ID: BYE
Description:
Database: Invalid parameter ObjTooLar transferred to database interface
Please let me know if I am missing any components, or if there is something I need to do.
Thank you.

Thanks Sunny.
That thread did indeed helped me to resolve the issue.
However, the thread did not really provide clear instructions to complete newbies like me.
For those who also have the same issue, this is what I did:
1. Execute RZ10 (Edit Profiles) via the SAP client GUI
2. Click on the menu Utilities - Import profiles - Of active servers
3. Edit the "Instance Profile" NSP_DVEBMGS00_{Your Computer Name}
Select Extended Maintenance, and select Change
4. Change the following two parameters:
alert/MONI_SEGM_SIZE from 0 to 60000000
rdisp/autoabaptime from 0 to 300
5. In the SAP MMC, right-click on NSP and select Restart
6. After restarting, login and you should be able to see the CCMS Monitor Template nodes

Technical monitoring of SRM system

Hi,
I would like to get a list of components to monitor in an SRM system. This is so that we can do weekly checks on the system to ascertain its health. For e.g. I should check whether IPC is up, similarly IGS, Integrated ITS, etc. etc.
Is there a standard template available for this?
Regards,
Sanket

Hi Sanket,
I don't know if it still helps, but there is a Best Practice document for technical monitoring of SRM. It concerns monitoring of EBP, ITS (standalone), IPC, Business Connector, Requisite Catalog, J2EE Engine as well as configuration of the engines, agents, etc.
Unfortunately, it doesn't say anything about monitoring the integrated ITS...
You can find it at https://service.sap.com/~sapidb/011000358700007362432002E
Just in case you're still looking for it.
Matthias

CCMS monitoring a remote server on a ditributed system that is not an R3 in

CCMS monitoring of a remote server using RFC-SAPOSCOL on a distributed system that is not an R3 install but just an DB server. Has anyone any idea how to set this up? I've read SAP note that refer to it and where to download the files but nothing on how to set it up.
Sorry to make that clear we have a distributed system with a SAP CI on one server and a SQL DB on the other. I would like to monitor the os through CCMS on the DB server.
Message was edited by:
        Chris Soden
Message was edited by:
        Chris Soden

Thanks Gary,
I haven't seen this no where would I find it. Had a quick look on the market place and can't find it!
Chris
Just to add were using Netweaver 2004s
Message was edited by:
        Chris Soden

Error in CCMS monitoring Batch job SAP_CCMS_MONI_BATCH_DP.

Hi All,
I am using a Sanbox system for CCMS Monitoring activities. I assigned a method CCMS_ONAlert_Email under auto reaction to the MTE class ABAP shortdumps on node System errors. So the requirement is when an alert triggered i have to receive an alert email. I just found there is an error in Batch job created for Alert monitoring, please find the error details mentioned below. Please let me know how to solve this error
Job started
Step 001 started (program RSAL_BATCH_TOOL_DISPATCHING, variant , user ID NBKIPXP)
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075617',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata1')
: ) AS FS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTIONin class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075633',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/log_dir/NO
: DE0000/') ) AS FS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075633',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata4/d
: b2es1/NODE0000/ES1/T0000003/C0000000.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata2/d
: b2es1/NODE0000/ES1/T0000003/C0000001.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata1/d
: b2es1/NODE0000/ES1/T0000003/C0000002.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata3/d
: b2es1/NODE0000/ES1/T0000003/C0000003.TMP') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata3/d
: b2es1/NODE0000/ES1/T0000004/C0000003.UTM') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
SYSID: ES1
SY-SUBRC: 1208
Message: ADBC error
SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata4/d
b2es1/NODE0000/ES1/T0000004/C0000000.UTM') ) ASFS_CONFIG
Database:
caused by
Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
Kernel Error ID:
DB Error: Yes
SQL Code: 444-
SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
/exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
on code: "4". SQLSTATE=42724
DB Object Exists: No
Duplicated Key: No
Internal Error: 1
Invalid Cursor: No
Unknown Connection: No
Connection Closed: No
xception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
Kernel Error ID:
SYSID: ES1
SY-SUBRC: 1208
Message: ADBC error
SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata2/d
: b2es1/NODE0000/ES1/T0000004/C0000001.UTM') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
:Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
: Kernel Error ID:
: SYSID: ES1
: SY-SUBRC: 1208
: Message: ADBC error
: SQL statement: SELECT '20110613075634',0 as DB6PMCF_PARTITION,FS_NAM
: E,'T','20110521174003','700',FREE_KB,USED_KB,TOTAL_KB,NUM_IUSED,PCT_IU
: SED FROM SYSIBM.SYSDUMMY1, TABLE(SAPTOOLS.DB6PMCF('/db2/ES1/sapdata1/d
: b2es1/NODE0000/ES1/T0000004/C0000002.UTM') ) ASFS_CONFIG
: Database:
:caused by
:Exception CX_SQL_EXCEPTION in class CL_SQL_RESULT_SET
: Kernel Error ID:
: DB Error: Yes
: SQL Code: 444-
: SQL Message: SQL0444N Routine "SAPTOOLS.DB6PMCF" (specific name "D
: B6PMCF") is implemented with code in library orpath "/usr/sap/ED2/SYS
: /exe/run/db6pmudf", function "Db6pmcf" which cannot be accessed. Reas
: on code: "4". SQLSTATE=42724
: DB Object Exists: No
: Duplicated Key: No
: Internal Error: 1
: Invalid Cursor: No
: Unknown Connection: No
: Connection Closed: No
Exception CX_DBA_ADBC in class CL_DB6_RDI method GET_SNAPSHOT line 431
Job finished

Hi Dinesh,
Please check the note is applicable for you [Note 978319 - DB6: Incorrectly cataloged table functions|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=978319]
so please check wheter db2<sid>user has enough permission
Thanks,
Jansi

File Systems are not shown in CCMS Monitoring

Hi Gurus,
We have installed all SAP components in Solaris 10 zones including Solution Manager.
Solaris File Systems are not shown in CCMS Monitoring under FileSystem. It looks like SAPOSCOL is not sending the OS data to CCMS. It does not show file systems in OS06 also.
The probles exists on Systems runnig in Solaris 10 zones only and NOT on systems running on individual Servers. [without Solaris zones]
Thanks,
Pj

Hi,
You need take some special considerations while installing SOLMAN on SOLARIS 10 zones. Check these notes
Note 870652 - Installation of SAP in a Solaris 10 zone
Note 724713 - parameter settings for Solaris 10
Hope this will solve your problem.
--Ragu

Integration Engine Monitor with PI Payload Search (Tcode: ZMONI)

Hi Team,
Good day.
I have been trying to search the internet on how to use the PI Payload Search (PIPS) functionality of the Integration Engine Monitor (Tcode: ZMONI) but so far I did not find one.
Does anyone know how to use every functionality of the PI Payload Search? Is there a manual or a how-to document for this function?
The PI Payload Search tab contains the following fields:
Sender
     Idoc Number
     Idoc Message Type
Message Version
     Message version
     Content To Be Searched
     Mime Type
     Payload Sequence Number
Message Size Selection
     Message Bytes
Content Search
     Namespace
     XML Element Name
     XML Search Value
Output Format
     Output to ZIP
     Filename
     GUI Download Path
     HTTP_POST URL
     FTP Server
     FTP User
     FTP Pwd (scrambled)
     FTP Directory
When executing Variant
     Change TVARV for dates
I could send you an email if you need more information or screenshot. Thank you in advance
KR,
Carlo
Edited by: Carlo Borja on Dec 23, 2011 5:20 AM

Hi. Carlo
Correct me if I wrong, this tx is customized , it's not standard.
However , you can search using
TREX . :
       http://help.sap.com/saphelp_banking60/helpdata/en/47/06b054c7750e8ae10000000a155369/content.htm
WithOut TREX :
       Payload Searching without TREX
Regards.
Luis Ortiz

CCMS monitoring for adapter engine

Hi,
We have configured CCMS monitoring for Adapter Engine for our client.
In RZ20 im able to see the alerts come up,with the default data that the system provides.
1. I need to send a mail when the alert is triggerred, but if I try to set the autoreaction method, it is greyed out and I get a info saying that the adpter engine node cannot be changed. How do I get over this?
2. Incase im able to set the autoreaction method , I want to send additional information like communication channel name etc in the alert message. How can I change the text in the alert email?
Thanks
Shakthi

Hello!
Please check the blog entry below
Configuration for forwarding Alerts as Emails
Configuration for forwarding Alerts as Emails

Missing "SAP XI Adapter engine" in CCMS Monitor

Dear all,
we try to configure PI CCMS monitor but we can't find the subtree "SAP XI Adapter engine " in Visual admin.
In detail:
the subtree "SAP XI Adapter engine "is not displayed in Visual administrato under
server->service->monitoring->Monitor tree ->Root application .
So we have set to true the value "CCMSEnabled" of seervice "SAP XI AF core" , and we have restarted the instance.
After the restart i DO NOT find the "SAP XI Adapter engine " in
SAP NetWeaver Administrator,
'System Management' -> 'Monitoring' -> 'Java System Reports' -> 'Reports'. From the dropdown list 'Report' choose 'Monitor Browser', and display all monitors
So I can't activate the monitor.
and if the subtree is not present , i can't see the MTE in "SAP XI Adapter engine " RZ20.
Additional info:
- In RZ20 I have my system under SAP J2ee Monitor template->All system
but the MTE "J2EE Applications" is grayed.
- In file application.xml under /usr/sap/ccms/XIT_10/j2ee<server0> i do not find the tag:
<app name="application sap.com/com.sap.aii.af.app">
<node>\XIT\XIT 10 Appl .... sp30t0\SAP XI Adapter Engine</node>
</app>
I think this is the correct procedure that we have done in other different landscape whithout problems.
Is there something else to check ?
I've alredy checked following Blogs
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Thanks in advance
Steven

Hi Sekhar,
I am using PI 7.0 instead so I have followed the instruction in (http://help.sap.com/saphelp_nw70/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm) instead.
The problem is, Adapter Engine is still not listed as one of the application avaialble for Monitoring in Visual Admin even though the SAP XI AF Core has definitely been set with CCMSEnabled = true.
Any further suggestions?
Thanks,
Wi

Message Monitoring Tool in RWB for Integration Engine Messages not working

Hi all
We currently work on a Pi 7.11 system. I f we start the runtime workbench and going to the message monitoring, we want to get in to a message in the integration engine. Normaly we should get the same sxi_monitor in the web browser, but we only get the soap envelope. The pipeline steps on the left side and also the payload cannot be seen.
We increased the rights of the user to sap_all but this did not changed anything. We also implemented the J2EE monitoring rule.
Seems to me as we forgot a setting after installation, but which??
Thanks in advance for your help.
Oliver

Hi Oliver,
I work on PI 7.0 and I know it's very different from 7.1x releases, but your problem sounds like a similar "problem" on 7.0.
Is your message sycronous? At PI 7.0 the default configuration is defined to remove the payload of sync messages. You can change it on JAVA Visual Administrator.
Try to find this parameter in Java Visual Administrator and set it to "false", below you will find the PI 7.0 path to this:
Server >> Services >> SAP XI AF Messaging >> messaging.syncMessageRemover.removeBody
I hope it helps,
Marcelo Vieira

Message Version option in Message Monitoring(integration engine)??

Hi All
While Message Monitoring in Integration engine, when i was checking the message contents in audit log i found a small drop down at the top saying "message version" which has version 0, version 1......
Not all messages were having the same versions, some were having 2 some 8.
What is this Message version option???
Any information on this will be appreciated.
Regards
Jabbs

hi,
>>>What is this Message version option???
have a look here
http://help.sap.com/saphelp_NW04/helpdata/en/c9/775b3b82646c3ae10000000a114084/frameset.htm
basically it lets you compare xml message after each pipeline step
Regards,
Michal Krawczyk

Duplication of messages in Integration Engine Monitoring

I send a file from sender(File System) to receiver (BPM). 1 sender 1 receiver.
There are 2 entries of sender to receiver in Integration Engine Monitoring. These rows are identical.
Quality of Service for File adapter is exactly once.
Could anyone expain this duplication?
Adapter Engine monitoring shows one message of sender

Hi,
pls see the below note for help.
note number: 821267 File FAQ.
. FTP Sender File Processing in Cluster Environment
Q: When running the File Adapter in an environment with more than a single J2EE server instance, the same file is fetched by multiple cluster nodes at once. How do I solve this problem?
A: Initially, please make sure that you do NOT use the processing mode "Test" for your File Sender channel. This mode is intended to be used only for testing purposes and is not guaranteed to work in a cluster environment.
Additionally, please activate the "Advanced Mode" for the respective sender channel or upgrade to SP11 Patch Level 2 or SP12. No further configuration changes are necessary.
Regards,
Satish

CCMS monitoring of SRM's own XI integration engine

Similar Messages

Maybe you are looking for