CCMS monitoring of WE02 and SM58

Hi,
I need to setup monitoring for WE02 and SM58 to trigger an auto-alert for errors.
For WE02 errors, this only needs to be done for status code 64 - awaiting transmission, if they have been idling too long.
For SM58 any errors should have alerts triggered.
Just wondering how I can go about to resolve this issue?
Thank you.

Assuming that you know CCMS basis configuration.
For SM58 (Transcation RFC), in RZ20 we have some MTEs and tree navigation is ,
RZ20 --> SAP CCMS Technical Expert Monitors --> All Monitoring Contexts --> Transactional RFC and Queued RFC. Here, we can monitor for all inbound/outbound RFC connections and queues as well.
For WE02 ,
RZ20 --> SAP CCMS Technical Expert Monitors --> All Monitoring Contexts --> ALE/EDI BD4(Client_nr) Log.sys <Logical_system>. Here, you have all the MTEs for IDocs.
Hope this info is useful to you.
- Hari.

Similar Messages

How to start to configure CCMS monitor sets ?

hi,
when executing RZ20, the screen title is
CCMS Monitor Sets - Maintenance functions OFF
does it mean that the monitoring is not configured yet ?
if i were to start the monitoring, how do i turn it on ? what needs to be monitored ?
please share with me how you make sure of the CCMS monitor sets.
comment and advice will be highly appreciated.
regards,
kent

RZ20 --> Extras --> Activate Maintainence functions
does it mean that the monitoring is not configured yet ?
Im not sure what this means. To copy the templates, I think you have to activate the maintainence function (not sure). I always do this as the 1st step.
if i were to start the monitoring, how do i turn it on ?
There are many things you will need to do
1. Configure SCOT to send out emails
2. Configure an auto reaction method (CCMS_ONALERT_EMAIL_V2)
3. Assign it to the nodes you need to monitor
4. Assign the auto reaction method to those nodes
etc etc
what needs to be monitored ?
Usually it is the database and the filesystem space, performance etc. It really depends on what you want.
please share with me how you make sure of the CCMS monitor sets.
Look at this link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/webcontent/uuid/30237989-0901-0010-70a4-944691eb5e52 [original link is broken]
comment and advice will be highly appreciated.
Kunal
Edited by: Kunal Belnekar on May 22, 2008 10:10 AM

CCMS qRFC Monitoring: Missing Transactional and Queued RFC Monitoring Nodes

Hi ,
We are trying to create a Queued RFC monitoring for VERTEX Queued , but we are missing CCMS Monitor Templates,in monitor Communications -->Transactional RFC and Queued RFC in Dev and PROD ,but its present in QA System .
I have checked all system are at same level for support packs , kernel version .
I have refered following Notes - 441269,437187,455431, 485826
Can we create manually new one , but we are missing MTE class also ?
Can we create new monitoring template ?
We are running 4.6c with basis support pack level :
SAP_BASIS 46C 0054 SAPKB46C54
SAP_ABA 46C 0054 SAPKA46C54
Thanks
Hamendra

Hamendra,
Please make sure background dispatching is activated in your system. Go to tcode RZ21 and menu Technical Infrastructure --> Method execution --> Active background dispatching.
This should schedule a job called SAP_CCMS_MONI_BATCH_DP. This is the job that will run the function for building the ALE/EDI monitoring segment.
After scheduling the job check back in a few hours, if the ALE/EDI monitor is still not there try the following.
1. Go to tcode RZ21
2. In the topology section choose radio button "Segment overview" and click display
3. Go into change mode and delete the monitoring segments
This will force the system to recreate all the monitoring contexts.
Check back in a few hours and see if the monitor is working.
Tarkesh

Ccms monitoring single definition under and MTE class

Hi Guys
For CCMS monitoring under RZ20 i am looking for a way to define a node that allow me to monitor a specific definition for those mte that dinamically create those definitions from the source system, for instance
if you select MTE class: filesystem you get the list of all the filesystems, like
/db2/SM1/sapdata1
/db2/SM1/sapdata2
/var
So lets says I just want to monitor /db2/SM1/sapdata1 and not to display the rest of the filesystems on RZ20
is there a way to configure this? maybe using some kind of filter for the name.
I want to configure this for the j2ee connector service but i get a buch of connector Applications RZ20 and I just want to monitor one of those Applications
Thanks for your help.

Thanks for this good document but I think it is not enough for me. I had registered the sapccmsr agent with J2EE option but it is not monitor the database correctly on the same physical server. In the Monitoring node of server process in Visual Admin i can't find a relevant object to activate database free space monitoring. In posted document I can't find the detailed information, too. Please provide me with a detailed specific information. Many thanks.
Which service is relevant to collect database relevant data to monitor non ABAP databases like single J2EE instances oder non-SAP Databases.
Edited by: Rene Schulz on Nov 19, 2008 3:16 PM

System Monitoring and CCMS Monitors

In our production environment we have working CCMS Monitors set up thru RZ20.
However if I go to solution_manager->system monitoring->operations tab, there are no alerts displayed on the page. Does system monitoring use the same backend as CCMS Monitoring? I am a little bit confused on this. If we set up System Monitoring, will this duplicate the CCMS Monitors we've previously set up?

If you want to see alerts on Operation tab in solution_manager->Solution Monitoring->System Monitoring you first need to run "Setup System Monitoring" (link is just below tab Operation or run in from Operations Setup tab). Setup will not duplicate CCMS monitors. It will just mark which of the available alerts should be taken into account for solution_manager->Solution Monitoring->System Monitoring report.
This might help you to start:
http://help.sap.com/saphelp_smehp1/helpdata/en/5b/0c9ccfd262427685c245d7ea85cd7a/content.htm

CCMS monitoring a remote server on a ditributed system that is not an R3 in

CCMS monitoring of a remote server using RFC-SAPOSCOL on a distributed system that is not an R3 install but just an DB server. Has anyone any idea how to set this up? I've read SAP note that refer to it and where to download the files but nothing on how to set it up.
Sorry to make that clear we have a distributed system with a SAP CI on one server and a SQL DB on the other. I would like to monitor the os through CCMS on the DB server.
Message was edited by:
        Chris Soden
Message was edited by:
        Chris Soden

Thanks Gary,
I haven't seen this no where would I find it. Had a quick look on the market place and can't find it!
Chris
Just to add were using Netweaver 2004s
Message was edited by:
        Chris Soden

File Systems are not shown in CCMS Monitoring

Hi Gurus,
We have installed all SAP components in Solaris 10 zones including Solution Manager.
Solaris File Systems are not shown in CCMS Monitoring under FileSystem. It looks like SAPOSCOL is not sending the OS data to CCMS. It does not show file systems in OS06 also.
The probles exists on Systems runnig in Solaris 10 zones only and NOT on systems running on individual Servers. [without Solaris zones]
Thanks,
Pj

Hi,
You need take some special considerations while installing SOLMAN on SOLARIS 10 zones. Check these notes
Note 870652 - Installation of SAP in a Solaris 10 zone
Note 724713 - parameter settings for Solaris 10
Hope this will solve your problem.
--Ragu

CCMS monitoring data collection

Hi,
I have set up CCMS to show alerts for inbound IDOC errors.
This seems to be working correctly, but the status is not being updated when the data collection method is being run. The data collection is set to run once per hour.
best regards,
Jason.

Hello Jason,
the IDOC monitoring functionality in CCMS is somewhat limited and cumbersome to set up via transaction BDMO. Far more sophisticated is the corresponding capability in Business Process Monitoring where you can monitor IDOCs regarding certain status and there it is also possible to monitor with a higher frequncy than just one hour.
More information on IDOC monitoring and other interface monitoring capabilities can be found in the corresponding Setup Guide from Q4/2008 that you find under
https://service.sap.com/bpm --> Media Library --> Technical Information.
Regards
Volker

CCMS monitoring for adapter engine

Hi,
We have configured CCMS monitoring for Adapter Engine for our client.
In RZ20 im able to see the alerts come up,with the default data that the system provides.
1. I need to send a mail when the alert is triggerred, but if I try to set the autoreaction method, it is greyed out and I get a info saying that the adpter engine node cannot be changed. How do I get over this?
2. Incase im able to set the autoreaction method , I want to send additional information like communication channel name etc in the alert message. How can I change the text in the alert email?
Thanks
Shakthi

Hello!
Please check the blog entry below
Configuration for forwarding Alerts as Emails
Configuration for forwarding Alerts as Emails

Missing "SAP XI Adapter engine" in CCMS Monitor

Dear all,
we try to configure PI CCMS monitor but we can't find the subtree "SAP XI Adapter engine " in Visual admin.
In detail:
the subtree "SAP XI Adapter engine "is not displayed in Visual administrato under
server->service->monitoring->Monitor tree ->Root application .
So we have set to true the value "CCMSEnabled" of seervice "SAP XI AF core" , and we have restarted the instance.
After the restart i DO NOT find the "SAP XI Adapter engine " in
SAP NetWeaver Administrator,
'System Management' -> 'Monitoring' -> 'Java System Reports' -> 'Reports'. From the dropdown list 'Report' choose 'Monitor Browser', and display all monitors
So I can't activate the monitor.
and if the subtree is not present , i can't see the MTE in "SAP XI Adapter engine " RZ20.
Additional info:
- In RZ20 I have my system under SAP J2ee Monitor template->All system
but the MTE "J2EE Applications" is grayed.
- In file application.xml under /usr/sap/ccms/XIT_10/j2ee<server0> i do not find the tag:
<app name="application sap.com/com.sap.aii.af.app">
<node>\XIT\XIT 10 Appl .... sp30t0\SAP XI Adapter Engine</node>
</app>
I think this is the correct procedure that we have done in other different landscape whithout problems.
Is there something else to check ?
I've alredy checked following Blogs
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
/people/sap.user72/blog/2005/12/05/xi-grmg-customizing-for-xi-ccms-heartbeat-monitoring-part-ii
Thanks in advance
Steven

Hi Sekhar,
I am using PI 7.0 instead so I have followed the instruction in (http://help.sap.com/saphelp_nw70/helpdata/en/e5/5d1741b393f26fe10000000a1550b0/frameset.htm) instead.
The problem is, Adapter Engine is still not listed as one of the application avaialble for Monitoring in Visual Admin even though the SAP XI AF Core has definitely been set with CCMSEnabled = true.
Any further suggestions?
Thanks,
Wi

CCMS monitoring of SRM's own XI integration engine

I have CCMS problems when monitoring XI integration engine of a SRM system. The integration engine will not appear in CCMS. I opened a question on SRM solution forum, could somebody have a look at it there. Here is the link to original question and earn your points there:
CCMS monitoring of SRM's own XI integration engine
background: I have previously managed to successfully set up CCMS monitoring for a plain XI system, but there seem to be some difference while SRM's XI only has integration engine and not J2EE engine running. SRM XI Integration engine is in place due to ABAP Proxies used by SRM.
best regards,
Kimmo

You have to follow the note <a href="https://websmp110.sap-ag.de/~form/handler?_APP=00200682500000002442&_EVENT=DISPLAY&_OBJECT=012006153200000552232003&_NNUM=634771&_NLANG=EN">634771</a>
and following this document <a href="https://websmp110.sap-ag.de/~sapdownload/011000358700004422742005E/XIMonitoringHowTo_01aSR.pdf">How To Monitor Exchange Infrastructure 3.0</a> pay attention to page 34, for the use of a Central Monitoring (CEN) System.
Of course you have to adjust the GRMG in order to have only the ABAP part under monitor.
Best Regards

Cannot see CCMS Monitor Templates - System is not configured

I just finished installing SAP Netweaver Trial, and I have been able to login using the SAP* and DDIC accounts.
I can see the standard tree via the SAP client GUI.
I am trying to take a look at the CCMS Monitor Sets, and I can see the standard collection of "Entire System", "Performance Overview", etc. all fine.
However, when I double-click to load any of the monitors, I see nothing inside.
No sub-trees, nothing.
I enabled "Display error nodes" and see a node that says
"NSP : System is not configured"
I have tried creating my own user, adding in profiles like SAP_ALL, S_A.System, etc.
I also notice everytime I access the CCMS Monitor Templates, there is an entry in the Syslog:
Severity: Warning
Process Type: D0
Transaction Code: RZ20
Client: 001
User: DDIC
Message ID: BYE
Description:
Database: Invalid parameter ObjTooLar transferred to database interface
Please let me know if I am missing any components, or if there is something I need to do.
Thank you.

Thanks Sunny.
That thread did indeed helped me to resolve the issue.
However, the thread did not really provide clear instructions to complete newbies like me.
For those who also have the same issue, this is what I did:
1. Execute RZ10 (Edit Profiles) via the SAP client GUI
2. Click on the menu Utilities - Import profiles - Of active servers
3. Edit the "Instance Profile" NSP_DVEBMGS00_{Your Computer Name}
Select Extended Maintenance, and select Change
4. Change the following two parameters:
alert/MONI_SEGM_SIZE from 0 to 60000000
rdisp/autoabaptime from 0 to 300
5. In the SAP MMC, right-click on NSP and select Restart
6. After restarting, login and you should be able to see the CCMS Monitor Template nodes

Automate monitoring of inbound and outbound queues

Hi,
I think It would be better to go for standard CCMS monitoring, if you dont have very specific requirements.
Yes, we can easily sent out emails for CCMS alerts. You can either use the auto-reaction method
CCMS_Send_Alert_to_ALM (Note 617547 - RZ20: Sending alerts as mail and SMS) or the one
CCMS_OnAlert_Email_V2 (Note 939616 - CCMS auto-reactions: Help with troubleshooting)
Regards,
Francis

Vamsee,
Go for CCMS - if you want to send the alerts to your technical support team. This provides active monitoring for SYSFAIL status and also for long running queues in SMQ2.

CCMS monitoring alerts

Hi Experts,
I need to install and configure CCMS Monitoring alerts.I don't have idea about CCMS, please help me for this and give me any links or docs.
In my Landscape we have 4 SAP systems.
1. SAP CRM7.0 EHP2
2.SAP ECC6 EHP5
3.NET WEAVER 7.3 EHP1
4.SAP SRM7.0 EHP2
Thanks
Jana

Hi Jana,
Please see link:
http://help.sap.com/saphelp_crm700_ehp03/helpdata/en/49/2d927507361903e10000000a42189c/frameset.htm
Normaly CCMS alrts are set as default. If it is not activated please see as well note 1827820 which might have been applied in your system.
Best regards - Christophe

CCMS Monitoring Sets in SAP Netweaver ABAP 7.01 Trial

Hi community,
I have successfully installed the trial in the subject but I can't see the alerts in transaction rz20 under CCMS Monitoring Templates. If I click on a node the message "No alerts data exists" appears in the status bar
I am not an expert of these functionalities, but I suspect that they have been disabled in this trial edition. Am I right, or I have to do some post actions to activate it?
Thanks, Valerio

Hi,
this is true, but these are disabled (in gray color) and the alert tree is empty, because these graphical icons reflect the status of monitoring alerts.
I found that parameter alert/MONI_SEGM_SIZE was set to 0 in the instance profile
By setting it to 40000000 (minimun value) now I can see the alerts in SAP MMC and the tree of alerts is full.
Unfortunately if I go in transaction RZ20 i see nothing as before...
Regars,
Valerio

CCMS monitoring of WE02 and SM58

Similar Messages

Maybe you are looking for