CCMS Montioring

Hi
I have done all the CCMS configuration using agents and rz21 the agents are online and visible but i am not able to view any data in rz20 for the systems where the agents are running in SAP CCMS Monitor Templates (RZ20)
Please help in this
Prateek

To follow up on the original question...
I have a similar situation in which a remote CCMS agent is running on a JAVA only system (Enterprise Portal), but the desired MTEs are not showing up in SolMan for that remote system. I have created the custom monitor set and have selected ALL possible MTEs related to this JAVA system to see if I can find the specific item I want to monitor. On SolMan I have verified in RZ21 that the remote CCMS agent is active (online), but the MTE I am needing is not there to select.
Specifically, I am trying to find an MTE that will report the success/failure of database backups via RZ20. This information can be seen on SolMan for the remote system in transaction DB14. Since the system that I want to monitor is a JAVA only system I assume that some of the standard MTEs that are delivered for systems that have an ABAP stack will not be available, but if the information is available via a transaction (as it is in DB14), there must be a way to get CCMS to also show (and report on) this same data. Does anyone know how to do this?

Similar Messages

CCMS Monitoring for Average HTTP response time

Hi guys ,
Is it possible to monitor Av. response time for HTTP(this is based on ST03) using CCMS ?
Thanks in advance
George

hi
As per my understanding you tried to view the responsetime comp as same like in sto3 by ccms, the way as below, RZ20-> SAP CCMS montior templates- >Entiresystem-><sid>->application server -><server>R3 services -> DIalog you can get all the response time as same in the ST03.
else in otherway if you looking for monitoring Java and webdynpro, you can do this by GRMG.chk this for to knw http://help.sap.com/saphelp_nwpi71/helpdata/en/45/4ee37fea5917eae10000000a155369/content.htm|http://help.sap.com/saphelp_nwpi71/helpdata/en/45/4ee37fea5917eae10000000a155369/content.htm]
for configuration,[GRMG-config guide|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/106a4d88-2a36-2c10-549b-dc549d00b8b9?quicklink=index&overridelayout=true]
chk and update
jansi

MDM ABAP APIs Issues;

Hi All,
1. Can we Create Lookup Field in the main table which is
link to Lookup Sub table Using MDM ABAP APIs.
2. We have to Assign FieldQualifiedFlatLookup entries and also qualifiers manually by going into MDM Data Manger as given in HowTo_13.Pdf. Can we achieve this Only Using MDM ABAP APIs.
3. What is the Role of Value Check inHowTo_19.Pdf.
4. Can change tracking achievable using MDM ABAP APIs
Assure Ponits will be rewarded for helpful Answers:
Thanks in Advance,
Mandy

Hi Mandy,
I would like to help you out on your last query.
ABAP API's has provided with 2 methods which are related to Change tracking.
The 2 methods are:
1. RETRIEVE_CHANGE_TRACKING: You can use this method to update the MDM Change tracking metadata.
2. RETRIEVE_UPDATE_TRACKING You can use this method to retrieve the MDM Change tracking metadata.
Along with this, you can use the tracking and CCMS Montioring functionality to keep a track on changes done in MDM through ABAP API's.
I am also attaching a link to a very gud webinar by Klaus David on ABAP API's:
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/00dd47bd-f2f1-2910-5eab-e9ca52465ae4].
Kindly go through it.
I hope it helps.
*Please reward points if found useful.
Thanks and Regards
Nitin Jain

Can we setup two sets different 7912 logos in one CCM cluster?

Hi,
CCM 4.1(3) cluster within head office. We created the 7912 logo for system default image. However, the remote site 7912 phones, need to use a different logo other than the head office.
as per http://forum.cisco.com/eforum/servlet/NetProf?page=netprof&forum=Unified%20Communications%20and%20Video&topic=IP%20Telephony&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40%40.1ddc5d3d/0#selected_message
We can create the 7912 logo, but how can we setup two or more different 7912 logos for different sites?
We noticed on CCM4.1(3), there is idle URL for 7912 phone, what is the callmanager default link for this URL? I am thinking to use different logo file names, and put the related URL on this parameters for remote site 7912 phones.
Could someone let me know or any other better way to do?
Thanks,
JJ

Hi JJ,
This should work just the way you have described. Have a look;
Idle
Enter the URL that displays on the Cisco IP Phone display when the phone has not been used for the time that is specified in Idle Timer field. For example, you can display a logo on the LCD when the phone has not been used for 5 minutes.
Leave this field blank to accept the default setting.
Idle Timer (seconds)
Enter the time (in seconds) that you want to elapse before the URL that is specified in the Idle field displays.
Leave this field blank to accept the value of the Idle URL Timer enterprise parameter.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a00801ecfc7.html#1121361
Here how on CCM;
Method 1:
Choose System > Enterprise Parameters so that the change is propagated to all of the phones from the Cisco CallManager Administration page.
In the URL Idle field, enter http://IP_address_of_CallManager/CCMCIP/filename.xml.
In the URL Idle Time field, enter any positive value in seconds.
Method 2:
Choose Device > Phone under the Cisco IP Phone configuration so that only this phone displays the graphics from the Cisco CallManager Administrator page.
Choose the phone/phones on which you want to put the display.
In the Idle field, enter the path http://IP_address_of_CallManager/CCMCIP/filename.xml.
In the Idle Timer field, enter any positive value in seconds.
From this good doc;
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00801c0764.shtml#topic4
Hope this helps!
Rob

Remote system CCMS segment not in local segments

Hi,
I have configured CCMS agents before but this one is puzzling.
- downloaded latest CCMS agents sar file for PI systems
- I have created the csmconf file and placed in the right locations.
- i started the CCMS agent for PI systems from Visual Admin and it found the csmconf file, i provided the passwords and it started but the segment name is not in "local segments" in RZ21 in SOlMan (Monitoring: Display technical topology) and therefore i am limited to what i can see in RZ20.
- i unregistered the agent and started it at OS level with the -j2ee option and gave the passwords and it still did not come under "local segments".
- the PI systems have remote Databases from which i started the CCMS agents and they do appear under "local segments" and can see them in RZ20.
- their respective CCMS agent are visible under the PI system's RZ21 "local segments" but as far as i remember from the OS level i did not configure it to register itself with PI itself but only with the CEN which is SolMan.
in my other solman systems the remote PI CCMS agents and amongst others are all under "local segments" and they all visible in RZ20.
I want to register the agents for the PI systems so that they appear under the "local segments" tab in solman and i can carry out my monitoring but they do not.
has anyone else had this problem?
Thanks,
Mani

Hi,
Please see if these threads help.
API to load images for
API to load images for
Employee Photo Upload in HRMS
Employee Photo Upload in HRMS
Dispay employee pictures in Employee Self Service screen
Dispay employee pictures in Employee Self Service screen
Regards,
Hussein

Not able to view catalogs in CCM after clicking on "edit catalog"

Hi all,
I am not able to view a single catalog (supplier, procurement or master) in CCM after clicking on edit catalog.
After clicking on "start" pushbutton, it is giving warning message "Error while editing Master catalog"
Could anybody tell me, what would be the problem ??
Thanks in advance.
Regards,
Vivek !!
Edited by: vivek kulkarni on May 26, 2009 12:18 PM

Hi Jason,
Thanks for reply and solution.....
but this problem is only for my user ID and not for all other user ID.
when we tried with other user IDs, all the catalogs are in green state and working fine. For my ID I am not able to view any catalog into edit catalog screen. When I am trying to search any catalog it is giving me warning message "Error in master catalog". When checked in SLG1 I got error as "catalog (catalog name) not found".
Is it related to any user setting or like that... as this is the issue with my individual ID.
Please suggest.
Thanks !
Vivek

Installation problem CCM 4.0(1)

I install ccm 4.0(1) on my pc with wins 2000 server plus sql 2000sp3a while install I got error about RPC connection fail duration installation cisco directory.
please help and ref
Thank in advance

This problem is addressed in Cisco bug ID CSCed88931

How to add pictures in CCM for items in SRM_EXTRAXTED_CATLG

Hi guys (and girls of course),
Best wishes for 2007 for all of you.
I've got following issue I've been struggling with: I'm trying to add a picture to items in CCM, but for items coming from R3 (replicated to SRM). I want to use the standard PICTURE/URL field for this ('complex' data type)
(procedure for uploading R/3-materials is currently already working)
I've been checking out following BADI's:
<u>/CCM/IF_EX_CTLG_ENRICHMENT~ENRICH_ITEM</u>
I have found an example for implementing this in another thread and this seems to work for 'simple' characteristics, eg /CCM/CONTRACT_ID as mentioned in the example)
<u>IF_EX_BBP_CCM_CHAR_MAINT~VALUATE_PRODUCT</u>
for additional customer-characteristics this works fine, also for simple standard characteristics (eg /CCM/MPN) this works fine.
But in both cases i seem to be unable to fill the complex characteristic /CCM/PICTURE (subfield /CCM/URL). I tried to use the same syntax as in the CSV-load file (ie /CCM/PICTURE#/CCM/URL) but it's not working as i expect.
When i add this info manually to the field, the picture shows as expected. (But adding this info manually is not an option of course.)
Any thoughts or hints would be greatly appreciated.
Some additional information
SAP_ABA     700     0009     SAPKA70009
SAP_BASIS     700     0009     SAPKB70009
PI_BASIS     2005_1_700     0009     SAPKIPYJ79
ST-PI     2005_1_700     0001     SAPKITLQI1
SAP_BW     700     0009     SAPKW70009
SAP_AP     700     0006     SAPKNA7006
CCM     200_700     0005     SAPK-27005INCCM
SRM_PLUS     550     0006     SAPKIBK006
SRM_SERVER     550     0006     SAPKIBKT06

Hi ,
I was not active on SDN for some time hence did not see yr thread.
We had used SRM_EXTRACTED_CATALOG in our earlier project and managed to get pictures for all the items in shopping.
The path we took:
with the report BBP_CCM_TRANSFER_CATALOG get the SRM_EXTRACTED_CATALOG in CAT
map the relevant categories in SRM_EXTARCTED_CATALOG to /CCM/MASTER_CATALOG.
import all the picture JPEG files for all the items in the MIME of server
SE80->MIME repository -> drill down to BSP/SAP/BC/CCM (sorry i don't remember the exact path and I don' t have the system now) -> create yr own folder-> import all the JPEG files to this folder.
now derive a URL for each item in a format: http:
server name.domain name\services (sap\bc\bsp\cat\yr folder name\file name)
validate this URL in IE
it should derive the picture from the MIME of yr server and show you on screen
now go to mastrer catalog ->open the chara "image" for each item -> paste this url and type (JPEG) -> and save the item
this should give picture of each item when you are shopping in EBP as preview and in detail also
it's somewhat cubersome to paster those URLs but it's one time activity.
Helpful?
BR
Dinesh
reward if helps

Jabber registration issue on CCM 7.1.5

Hi Guys, I'd like to ask your valuable advice on the following:
- we're running CCM 7.1.5(b)SU5
- we installed the following .cop files for Android support (we tried one after the other hoping to get around the problem):
     cmterm-android_8.6.2v17.cop.sgn
     cmterm-android_8.6.2v17b.cop.sgn
     cmterm-android_9.0.1v24.cop.sgn
- we forced the phone (Samsung Galaxy S GTi9000) to install the following Jabber client (found on CCO together with the above device files for which it should be compatible):
     Release 8.6(5) - Optimus-MR3-aligned.apk
Unfortunately we had no luck and the phone gets always the 'timeout/check network config' error.
This is what you see on CCM side:
12/07/2012 10:51:44.332 CCM|SIPStationD(7,100,169,47), BOTTEST, 10.40.251.125:40916, primaryDN=5011, Registration profile error: Error: DB Config, sending registration reject and closing station|<CLID::CCMSG-Cluster><NID::10.40.11.23><CT::0,0,0,0.0><IP::><DEV::><LVL::Error><MASK::0020>
... we followed all the Cisco guidelines to create a suitable device configuration (the same worked like a charm on CCM 8.5).
I'll attach a CCM trace showing the above error (as you may have guesses, the phone name is 'BOTTEST')
Thanks a lot !
- Andrea

I've been having a real fun time trying to get Jabber for Android working as well. CUCM version 8.6.2 and Jabber 9.0.
The trick was to check the box for 'Use Fully Qualified Domain Name in SIP Requests' in the SIP profile you created for Android phones.
I was connecting to the CUCM, but then it would time out.
Thanks,
Richard

CUCM 8.6(2) - High CPU utilization - CCM process

Hello,
Process name ccm is peacking 91% of CPU utilization in one of Subscribers.
On cluster there are 1 Pub, 2 Subs, and 2 TFTP.
CCM service was already restart, and Subs reload, but problem remain.
We have checked and removed association with phones not registered, but problem remain.
Proc,PID,CPU,Status,SharedMem,Nice(Level)VmRSS,VMSize,VMData,ThreadCount,DataStackSize,PageFault
ccm,32687,90,SLEEPING,87380,0,426792,605276,468544,47,418345,744
VMware Installation:
        1 vCPU: Intel(R) Xeon(R) CPU E5-2643 0 @ 3.30GHz
        Disk 1: 80GB
        4096 Mbytes RAM
admin:show process name ccm
PID PPID   TID %CPU S COMMAND
32687     1 32687 0.0 S ccm
32687     1 19549 0.0 S ccm
32687     1 19570 0.0 S ccm
32687     1 19639 0.0 S ccm
32687     1 20057 0.0 S ccm
32687     1 20331 0.0 S ccm
32687     1 20332 0.0 S ccm
32687     1 20333 0.0 S ccm
32687     1 20354 0.0 S ccm
32687     1 20360 0.0 S ccm
32687     1 20361 0.0 S ccm
32687     1 23336 0.0 S ccm
32687     1 23337 0.0 S ccm
32687     1 23338 0.0 S ccm
32687     1 23339 1.0 S ccm
32687     1 23340 0.1 S ccm
32687     1 23341 0.2 S ccm
32687     1 23342 0.0 S ccm
32687     1 23349 0.0 S ccm
32687     1 23988 0.0 S ccm
32687     1 23989 21.6 S ccm
32687     1 23990 0.7 S ccm
32687     1 24013 0.0 S ccm
32687     1 24043 0.0 R ccm
32687     1 24044 0.0 S ccm
32687     1 24045 0.0 S ccm
32687     1 24046 0.0 S ccm
32687     1 24047 0.0 S ccm
32687     1 24048 0.7 R ccm
32687     1 24049 0.2 S ccm
32687     1 24050 0.1 R ccm
32687     1 24051 0.0 S ccm
32687     1 24052 0.0 S ccm
32687     1 24053 0.0 S ccm
32687     1 24054 0.0 S ccm
32687     1 24091 0.0 S ccm
32687     1 24092 0.0 S ccm
32687     1 24093 0.0 S ccm
32687     1 24181 0.0 S ccm
32687     1 24182 0.0 S ccm
32687     1 24192 0.0 S ccm
32687     1 24277 0.1 S ccm
32687     1 24278 0.0 S ccm
32687     1 24279 0.0 S ccm
32687     1 24280 0.0 S ccm
32687     1 24281 0.0 S ccm
32687     1 24282 0.0 S ccm
admin:
Are there any specific tests, or logs prior to isolate this issue?

Hi,
A few points:
> Use one of the recommended OVA templates
> Check if the spike is random or occurs at a specific time. If it occurs at a specific time it could be coinciding with something like DRS backup, CDR load, busy hours etc.
> Minimum set of logs needed for one such high CPU spike instance are:
Detailed ccm traces from all nodes
RisDC Perfmon logs
Proglogs
Also, capture the output of the following:
utils diagnose test
utils core active list
show process load
HTH
Manish

CME, Call forward to CUE from CCM IP phone

I want to call forward the call from CCM IP phone to CME ephone's voicemail which setup in CUE. works okay between CME ephones. configured voice service as follows but no luck. what did I missing to implement?
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
no supplementary-service h450.2
no supplementary-service h450.3
-CCM4.1.3, configured H225 trunk. leave uncheck the MTP on the trunk device
-gatekeeper to connect between CCM and CME
-CME3.3, h323 to gatekeeper and sip to CUE
-CUE2.1
Thanks in advance,

It works by restart the CME router and have a question the sip-ua output. I have two media streams but the 2nd shows "STREAM_IDLE". I think this is for g729 connected to CCM via h323 gk. Can I get an explanation why?
CME#sh sip-ua calls
SIP UAC CALL INFO
Call 1
SIP Call ID : [email protected]
State of the call : STATE_ACTIVE (7)
Substate of the call : SUBSTATE_NONE (0)
Calling Number : 4083132006
Called Number : 4211
Bit Flags : 0x101A0030 0x100000 0x500
CC Call ID : 95
Source IP Address (Sig ): 10.253.66.254
Destn SIP Req Addr:Port : 10.253.66.2:5060
Destn SIP Resp Addr:Port: 10.253.66.2:5060
Destination Name :
Number of Media Streams : 2
Number of Active Streams: 1
RTP Fork Object : 0x0
Media Stream 1
State of the stream : STREAM_ACTIVE
Stream Call ID : 95
Stream Type : voice-only (0)
Negotiated Codec : g711ulaw (160 bytes)
Codec Payload Type : 0
Negotiated Dtmf-relay : inband-voice
Dtmf-relay Payload Type : 0
Media Source IP Addr:Port: 10.253.66.254:16998
Media Dest IP Addr:Port : 10.253.66.2:16904
Orig Media Dest IP Addr:Port : 0.0.0.0:0
Media Stream 2
State of the stream : STREAM_IDLE
Stream Call ID : -1
Stream Type : voice+dtmf (1)
Negotiated Codec : No Codec (0 bytes)
Codec Payload Type : 255 (None)
Negotiated Dtmf-relay : inband-voice
Dtmf-relay Payload Type : 0
Media Source IP Addr:Port: 10.253.66.254:17120
Media Dest IP Addr:Port : 0.0.0.0:0
Orig Media Dest IP Addr:Port : 0.0.0.0:0
Number of SIP User Agent Client(UAC) calls: 1
SIP UAS CALL INFO
Number of SIP User Agent Server(UAS) calls: 0
CME#sh sccp connections
sess_id conn_id stype mode codec ripaddr rport sport
1 2 xcode sendrecv g711u 10.253.66.254 2000 16518
1 1 xcode sendrecv g729 10.253.66.254 2000 17620
Total number of active session(s) 1, and connection(s) 2

Having a few issues with several programs (tor / mpd / ccm..)

Hey everybody,
I'll arrange this post in 3 parts since I have 3 different kinds of "major" problems or questions .
1st ( tor - privoxy - polipo - iptables )
I somehow found this article in your wiki and therefore tried to get tor and privoxy up and running on my desktop machine, as this didn't work as I hoped it would I searched farther in the wiki and installed and configured (as far as I've thought of) polipo and iptables.
Now I've put all 4 of them in my rc.conf, but somehow some of my http connections don't seem to work in chromium while iptables is running (https works fine though [e.g. archwiki works, youtube doesn't]).
I did everything as suggested in the polipo wiki entry, meaning I changed my /etc/iptables/iptables.rules to
*nat
:PREROUTING ACCEPT [0:0]
:POSTROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [0:0]
-A OUTPUT -p tcp --dport 80 -m owner --uid-owner polipo -j ACCEPT
-A OUTPUT -p tcp --dport 80 -j REDIRECT --to-ports 8123
COMMIT
and removed all proxy settings from my browser - meaning all corresponding flags in the startcommand. I also added "forward / localhost:8123" to the privoxy config and changed the polipo configuration according to the wiki in order to work with tor (the socksParentProxy, socksProxyType part).
now the next problem - that might probably be related to the first - is that my privoxy doesn't load in daemon mode anymore.
I think it's since I've installed polipo that privoxy began to refuse starting together with the other daemons
[usR@machine ~]$ privoxy
Apr 23 00:20:56.459 b75086c0 Fatal error: can't check configuration file '/home/usR/config': No such file or directory
this is the output I get when I try to start privoxy in normal user mode from the terminal, when I try starting the daemon manually (/etc/rc.d/privoxy start) it says
touch: cannot touch `/var/log/privoxy/logfile': Permission denied
chgrp: cannot access `/var/log/privoxy/logfile': Permission denied
chmod: cannot access `/var/log/privoxy/logfile': Permission denied
touch: cannot touch `/var/log/privoxy/jarfile': Permission denied
chgrp: cannot access `/var/log/privoxy/jarfile': Permission denied
chmod: cannot access `/var/log/privoxy/jarfile': Permission denied
Apr 23 00:22:34.490 b76396c0 Fatal error: Cannot setgid(): Insufficient permissions.
[/var/log/privoxy belongs to privoxy:adm]
when I do the same in sudo mode it just fails without displaying an error message..
I added this code to the /etc/rc.d/privoxy executable but I still get this owner conflict error and I have no idea what might be causing it.
if [ ! -d /var/log/privoxy ]
then
mkdir /var/log/privoxy
touch /var/log/privoxy/errorfile
touch /var/log/privoxy/logfile
chown -R privoxy:adm /var/log/privoxy
fi
If the order of the daemons in rc.conf is of any real importance here a copy of my setup
( @polipo @privoxy @syslog-ng !set-hw-addr !iptables @network netfs hddtemp @crond hal dbus @alsa @slim @tor )
2nd ( mpd & mpc )
I'm just wondering if there's a way to output the position of a track in the current playlist combined with a search. since mpc search <type> <query> only prints out full file path and name, but not the position in the playlist so that you could play it with mpc play. I thought of a method to print out the whole list with mpc playlist and pipe this output into a listing program, than grep out the song I'm looking for all that in a little bash script, to replace mpc search.
Is there an integrated mpc search function that works the way I imageine it and my idea therefore redundant, or if not, is it realizable the way I picture it; does such a listing program exist?
3rd ( cairo-compmgr )
Since I'm already posting here I thought I'd mention my older problem which I still couldn't solve.
1st) I need to start cairo-compmgr(-git) in sudo mode to be able to edit any settings or activate the gui in any way. how do I automatically start the program on startup in sudo mode? I tried editing ~/.fluxbox/startup & ~/.fluxbox/init, even tried adding it in /etc/rc.d/ and /etc/rc.conf in order to start it as a daemon (lol, noob) but none of that worked properly obviously Any ideas? I don't want to start it manually and "waste" a terminal window for that every time I boot.
2nd) I can change opacity (transparency) in both versions only per hotkey, and when I do so the settings don't get saved, they even get reset to normal opacity as soon as another window gets selected. does anybody know if there's a config file or any way to save opacity settings for certain windows & programs, so that they automatically get loaded when cairo starts and stay applied until it gets closed?
[or generally: how do I configure the Plugins? ]
the last "problem" which occurs only with cairo-compmgr-git:
When I rightclick the ccm icon in the task bar and disable the composite desktop, the whole program kills itself oO
In the old version the option "Composite desktop"'s box just got un-checked and I could easily restart ccm by rightclicking the logo again and re-enabling the "Composite desktop" option.
Any clues on that by any chance?
I'm using Fluxbox by the way, if that's of any importance for any of the problems. hope I didn't forget any important information if so please remind me
Would be thankful for any kind of help
have a nice weekend
deF
//edit:
concernig the tor / privoxy problem, I managed getting all the daemons to start up at bootup again, my iptables situation remains the same though.
I went through all the config files again and played around with chown and chmod a little and for now the system is stable, everytime I reboot all the daemons start without any problems.
but when i start chromium with --proxy-server=localhost:8118 now, I get the following error message
The following error occurred while trying to access http://torcheck.xenobite.eu/index.php?:
504 Connect to torcheck.xenobite.eu:80 failed: SOCKS error: network unreachable
Generated Sat, 23 Apr 2011 04:49:08 CEST by Polipo on archzor.localdomain:8118.
notably with all programs running now, tor, polipo, privoxy (and by now dansguardian as well)..
I'm tired so I'll go asleep now, maybe I'll find something tomorrow in the logfiles or whatever, so far:
every kind of help is still very appreciated
²
/var/log/polipo/polipo.log
Disabling disk cache: No such file or directory
Couldn't bind: Address already in use
Couldn't establish listening socket: Address already in use
Couldn't bind: Address already in use
Last edited by deF291 (2011-04-23 03:13:48)

okay I've finally been able to get tor and all the other programs to work according to my plan the only thing that's still making problems is that iptables doesn't work as I want it to, when I start chromium without proxy settings privoxy doesn't seem to forward the information to polipo.. do I need to add another rule to iptables.rules in order for the program to know it has to reroute the information again or how can I get this to work? and is there any way to run rtorrent with proxy support?
anyway, problem 2 and 3 are still to be solved.
and does anybody know where i can get a good dansguardian blacklist that was not designed for 6 year old children and for which I don't need to subscribe? I'm still getting these partypoker popups -.-
//e: with iptables it's the same thing as described in the first post. https works, http doesnt. I get the output "Invalid header received from client." on http sites. still no idea why though.. (and the https-version of torcheck.xenubite says i'm tor unprotected while starting the browser with iptables)
Last edited by deF291 (2011-04-23 16:16:31)

Error message of MAC flapping for CCM-UC installed in UCS server

Dear All,
I have a strange issue, I have the 2 UCS servers setup with CCM & unity Connection running on each server on PUB - SUB mode.
I'm getting following error message on the Switch where the UCS server Connects.
I'm unable to trace why we are getting this error message, There is no problem with accessing CCM or UC, also the Phone & Voice mail seem to working.
un 25 13:15:14.853: %SW_MATM-4-MACFLAP_NOTIF: Host 000c.2911.db00 in vlan 410 is flapping between port Gi1/0/34 and port Gi1/0/33
Jun 25 13:15:28.828: %SW_MATM-4-MACFLAP_NOTIF: Host 000c.2911.db00 in vlan 410 is flapping between port Gi1/0/34 and port Gi1/0/33
Jun 25 13:15:44.145: %SW_MATM-4-MACFLAP_NOTIF: Host 000c.2911.db00 in vlan 410 is flapping between port Gi1/0/34 and port Gi1/0/33
Has anybody expereinced such error before, Appreciate your help in tracing this error.
Thanks,
Oliver

Hello,
I believe you'll get better answer at:
"https://supportforums.cisco.com/search.jspa?peopleEnabled=true&userID=&containerType=14&container=2003&spotlight=true&q=UCS"
my best guess is to check the LAN config on the UCS. It seems its trying to load balance the traffic in Active-Active rather than Active-Standby.
HTH

Records are not deleting in SAP CCM (CCM2.0), eventhough Action code 03 is

Hi all,
We are facing a problem in SAP CCM 2.0, products are not deleting from Catalogs ( Internal Catalogs) eventhough action code '03' ( Deletion) is passing to Catalogs.
In case of updating and new records creation is working fine , changes are updating and new records getting added to catalogs.
Could you please advise why deletion is not working. what would be the reason.
Is there any other way to delete the records from the Catalog.
thanks in advance

Hi,
There is no standard functionality for deleting items from SRM CCM 2.0.
Very recently, we have come across the same problem that materials/items which are deleted in SAP R/3 4.7 are not getting deleted from SRM CCM 2.0 catalog.
We have done some analysis and found the below solution.
- You need to send an action code "04" and drop Product Category information in XML file which XI uses to send the information from ERP to SRM CCM catalog.
For this you need to modify the XML and XI mapping for the ZACTION code(03) received from ERP.
Once the changes are done in XML, you re-publish the catalog.
You will find the item/s have got deleted from the catalog.
Note: It is important to note that even for deletion, system records action as catalog items Update/Created in the logs (SLG1) but not the action as catalog items deleted.
Hope this helps !
Regards,
Vikas

CCMS agent update fails with an error

Hello All,
We are trying to update CCMS agent 700 unicode version on 640_REL unicode kernel.
But we are getting below error
./sapccm4x -v
Could not open the ICU common library.
   The following files must be in the path described by
   the environment variable "LIBPATH":
   libicuuc30.a, libicudata30.a, libicui18n30.a [nlsui0_mt.c 1557] pid = 860208
Please help.
Thanks,
Anu

If you use the Unicode version you need to install the Unicode libraries also.
You find them in the download area (where you got the CCMS patch) under "UCLIB". I assume this is AIX so you can also search for the file
UCLIB_3-20000978.SAR
extract it and put the files in the kernel directory.
Then logout and logon (the shell) and try again (or simply give a 'rehash' command).
Markus

CCMS Montioring

Similar Messages

Maybe you are looking for