CCMS Operating System Alert Monitor for Filesystem

Hi,
In alert monitor set for operating system, for some filesystems the freespace & percentage_used were showing zero and saying value is obsolete.
But those filesystem were existing with some space used in it.
How to make that particular filesystem alert to reflect the space which is used.
Please advise.
Thanks in Advance.
Thanks
Arun.

Hi Sunny,
Thanks for your quick response.
For OS file alerts oscol.ini is responsible. But i am getting the same prob with most of the alert monitor.
Those are collected the data some weeks ago. Not reflecting the current status.
Eg: CPU_Utilization Alert also showing last week date and showing the current utilization.
Is there any other program need to be run to get those alert monitor set to get update.
Please advise.
Thanks
Arun

Similar Messages

My mac mini is running slow. Bought it in 2009. Activity monitor shows nothing running that should not be. Someone suggested it might be my operating system? Check for software updates, and I am current. Suggestions?

My mac mini is running slow. Bought it in 2009. Activity monitor shows nothing running that should not be. Someone suggested it might be my operating system? Check for software updates, and I am current. Suggestions?

Open Activity Monitor, Show:>All Processes, sort on CPU%, see if anything using too much CPU% when this happens, click on Memory tab, do you have many Pageouts?
Open Console in Utilities & see if there are any clues or repeating messages when this happens.
Check the S.M.A.R.T. status of the drive in Disk Utilty by highlighting the Drive & looking at the bottom of the window.

Alert Monitoring for tcodes!

Hi Experts,
I need to monitor ST22(Short Dumps),SM13(update requets through CCMS.Please let me know how can we set up alert monitoring for particular tcodes?

Hi,
For this first you need to install CCMS agents first, if you have solution manager is landscape(It should actually) you can monitor same from solman.
[Here is the link |http://help.sap.com/saphelp_nw70/helpdata/en/e2/eff640fa4b8631e10000000a1550b0/content.htm]
Then you can send mail trigger from solution manager for update errors and dumps as well.
Regards,
Gagan Deep Kaushal

Alert monitor for Forecast Exceptions?

Does Flexible Planning offer any type of Alert monitor for flagging Forecast Exceptions? We're creating a statistical forecast in MC94 and would like to set up some automatic triggers or alerts. I know APO has this functionality, but I have yet to be able to find any type of exception reporting.
Any help would be greatly appreciated.
Thanks.

Hi,
Do you still have the issue, Please let us know if you need further help.
BR
Claire

Which operating system is best for computer control using LabVIEW

I am using LabVIEW 7.1 and want to write a program to control a system of pumps, heaters, and compressors. I am wondering if using Windows XP is a bad thing, given how many background processes computers tend to use these days. I don't want my computer to slow down for intermittant checking for updates, or any other sort of routine maintenance computers are set up to do. I have heard mixed things about windows reliability and computer control, most of which is people saying windows could crash and completely ruin my tests. Does anyone have any advice on the best operating system to use for continuous computer control of my system?

If you plan on using a desktop PC for control type applications, then your best option in terms of performance will be with a Real-Time operating system. Windows is not deterministic for many reasons. Determinism involves the ability to respond to an event within a specified amount of time with an acceptable amount of error (jitter). First of all, Windows is not deterministic because it has to service mouse and keyboard events, as well as anti-virus software, automatic updates, etc.
You can, however, convert an existing desktop PC to a Real-Time target with a Real-Time OS and use it for your control type application with the deterministic behavior of PXI, Compact FieldPoint, and other Real-Time targets. Check out this link for more information.
On a side note to a previous reply, using the LabVIEW Real-Time module on Windows XP won't make your application deterministic. Your best bet, as others have noted, is to use the LabVIEW RT Module on an RT OS with good RT programming practices (avoiding memory allocations, etc.).
Jarrod S.
National Instruments

Alert monitor for long running background jobs

Hello,
I have to configure an alert moniter for long running background jobs which are running more than 20000 secs using rule based. I have created a rule based MTE and assigend MTE class CCMS_GET_MTE_BY_CLASS to virtual node but i dont find a node to specify the time.
could any one guide me how can i do this.
Thanks,
Kasi

Hi *,
I think the missing bit is where to set the maximum runtime. The runtime is set in the collection method and not the MTE class.
process: rz20 --> SAP CCMS Technical Expert Monitors --> All Contexts on local application server --> background --> long-running jobs. Click on 'Jobs over Runtime Limits' then properties, click the methods tab then double click 'CCMS_LONGRUNNING_JOB_COLLECT', in the parameters tab you can then set the maximum runtime.
If you need to monitor specific jobs, follow the process (http://help.sap.com/saphelp_nw70/helpdata/en/1d/ab3207b610e3408fff44d6b1de15e6/content.htm) to create the rule based monitor, then follow this process to set the runtime.
Hope this helps.
Regards,
Riyaan.
Edited by: Riyaan Mahri on Oct 22, 2009 5:07 PM
Edited by: Riyaan Mahri on Oct 22, 2009 5:08 PM

How to fix "A 32-bit agent is installed on 64-bit operating system" alerts

Hi
We have installed SCOM 2007 R2 CU1 in our environment (by properly following installation sequence given on the CU1 web page). After manually installing agent update of CU1 on 64 bit servers, we are getting alerts "A 32-bit agent is installed on 64-bit
operating system" and the status of these 64-bit servers remains in Warning state. We have manually uninstalled and reinstalled 64-bit agent as well as 64-bit CU1 agent update but still the status is in Warning state. We can not completely uninstall cluster
node agent, remove it from the console and reinstall agent from scratch because SCOM R2 is not allowing to do clean uninstall and reinstall of agent on cluster nodes.
If anyone faces similar problem and have fixed it then please let me know the solution so i can also fix the issue.
Thank you
HRP
Thanks & regards, H R Parikh

This new(er) monitor is set to generate when the registry key "HKLM\SOFTWARE\Wow6432Node\Microsoft\Microsoft
Operations Manager\3.0\Setup" is found on a 64-bit Windows server. We have several alerts like this as well, but found it had little to do with the CU1 patch and
more to do with rolling out the updated Operations Manager management pack (v6.1.7599.0) at around the same time as well as the server having had a 32-bit agent previously installed at one point or another. We are looking into simply removing the 32-bit
key, but have not done so just yet as we need to test this theory on a dev server first. Of course, to be safe, we could always uninstall the agent and patch, delete the keys manually, and then reinstall.
Hope that helps.
Larry

Windows Operating System "Not Monitored"

Hi, I have seen multiple posts regarding this, and I have tried many things without luck. I thought I'd contribute what helped me. Funnily, I actually fixed the problem while posting my question. But I thought this may be useful to anyone else with the same
issue.
We have SCOM 2012 7.0.8560.0
We have the Windows Server Operating System MP installed, 6.0.7061.0
3 servers are reporting that the Windows Operating System is "Not Monitored".
The 3 servers which are not being monitored all appear to be Windows Server 2012 R2 operating system.
What we've tried
Uninstall SCOM agent from the SCOM console. Remove SCOM agent folder. Reboot. Reinstall SCOM Agent from SCOM Console (push install). install completes successfully.
Enable Proxy Discovery
Reboot SCOM Servers
Ensured the SCOM service account has Admin rights on the server
Disabled Windows Firewall
Set User Account Control to minimum
Verified DNS (DNS functions 100% in our environment, with scavenging every 7 days)
SCOM Database Grooming runs every 7 days
The problem has existed for weeks\months, so this is not a DNS or Database grooming issue (unless there is something lingering in the database?)
Re-Ran the "download SCOM Management Packs" from the console - all MP's are up to date
After reading through the release notes of the Windows Server Management Pack, I searched my discovery rules to perhaps see if we had disabled the Server 2012 discoveries, or something careless like that. To my amazement,
there we NO Windows Server 2012 R2 Discoveries present in our environment! This confused me greatly, since we are running the latest version of the Windows Server management pack.
For some reason, it appears that updating your MP's from the console wizard does not pull this down.
After manually downloading
the Windows Server Operating System management pack, and installing it manually, everything started to work.
I'm not sure why the SCOM wizard doesn't do this, but this has kept me busy for days, for something so easily missed.
I suggest MS enhances the SCOM "update MP" downloads to pull down an entire management pack if it says it was "imported successfully". I now wonder what else I think it "up to date", which may have rules missing without
my knowledge.
Cheers

Hi,
It is really nice of you to share this, this will help others who encounter the same issue.
And as far as I know, we need to manually download the Windows opearting system management pack to management group, then we can monitor windows operating system:
http://www.microsoft.com/en-hk/download/details.aspx?id=9296
Regards,
Yan Li
Regards, Yan Li

Alert monitor for messages in error status

Hi, it is possible to configure de Xi Alert Monitor to show in the message body the error that shows the message monitoring?
In the SOAP header when there is an error y can see a tag "error" and it shows this info (for example):
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">STARTUP_EXCEPTION</SAP:Code>
<SAP:P1>com.sap.aii.utilxi.prop.api.PropertiesException</SAP:P1>
<SAP:P2>Unable to read configuration data (ExchangeProfil~</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error occurred while starting the Java application "IntegrationServices"; restart the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
It is a way to show any of this information in the message body that sends the Alert monitor?
Regards.
Mariano.

Hi,
you will not be able to get the entire msg payload of SXMB_MONI in alert.
But you can create a alert category and in its Long text you can have variables for Error Category and Error Text. So you will get alert mails with Error category and Error Text.
Regards,
Rajeev Gupta

Problem with CCMS PI7.1 alert configuration for RWB Alert count

Hi,
We have configured CCMS alert for PI7.1 RWB failure count. Alert is getting triggered only one time and after that no alerts. I can see the change in data but alert is not getting triggered. If I complete the alert then immediately in next run a new alert is generated with last reported data and then again there will be no alert going forward. Data is collected but no alert is triggered. Does anyone know the reason for this and how to fix it? Please help.
Thanks,
Kavitha Rajan.

Hi Jayan,
Our PI alert configuration is fine. And also we did not choose multiple suppress method. Problem is with Solution Manager CCMS PI alert configuration for failed RWB count. After initil alert and then nomore alerts are triggered. If I complete the alert then again only first alert is triggered and again no alerts going forward. Please advice.
Thanks,
Kavitha Rajan.

Operating system not supported for installing ALM trail version on a windows 7

My mahine has windows 7 64bit operating system and 8GB Ram but when I am trying to install intall ALM 12.2 it says This machines' operating system is not a supported and recommended ALM (12.20) server.

You need to update your version of XP to SP2. You can do this for free at microsofts website or by using windows update.

What operating system is needed for mac to download Illustrator? I am currently running OS X 10.6.8

I just bought the single creative cloud for illustrator and when I try to download it says it doesn't support my operating system. I have a macbook running OS X 10.6.8..... What do I need to do to download the program? I have enough space as well so that can't be it.

If it is a CC version of Illustrator then your 10.6.8 system will be the problem...
Illustrator - http://helpx.adobe.com/illustrator/system-requirements.html

HT204053 what operating system is needed for icloud

I have an older operating system and wanted to know if Snow Leopard was needed for current versions of ICloud. If so, what would be the best way to get the Snow Leopard Operating System?

Snow Leopard is not compatible with iCloud except that you can set up Mail to access the emails on an existing iCloud account. You can also do this on Leopard or Tiger.
The minimum requirement for iCloud is Lion 10.7.2 and iOS5.

Which Operating system is best for jdeveloper 11.1.2.3?

Hi,
I am using jdev 11.1.1.2.3
Now i am using Oracle Linux operating system for jdev 11.1.2.3 some browser compatabilities arraised
any suggestions...... if windows7 is best i will use
Thank you.

No particular OS is recommended, an array of OS are supported.
Oracle JDeveloper 12c Support</title><meta name="Title" content="Oracle JDeveloper 12c Support&q…

Missing operation system & PC Doctor for DOS bootable CD

Hello, I have a T 43
I downloaded the PC Doctor for DOS bootable CD and burned it to a CD, I used the directions at http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-56222 and I get a message saying "Missing operation system"
thoughts?
Thank you
Kimberly

Assuming that you've downloaded the 1ety47ww.exe file, executed it to unpack the .ISO file, burned the .ISO file to a blank CD using a "write image" (or similar) option to your CD burner program and have the CD/DVD drive in the list of bootable drives, then it should work. The two most common things which go wrong and give you the "missing operating system" error message are:
- simply copying the .ISO file to the blank CD; that is, telling the burning program to treat the .ISO file as any other document or data file. The CD writing program MUST use a specific setting/option which properly writes the .ISO file to the disk so that it becomes bootable
- the system's BIOS has removed the CD/DVD drive from the list of available boot devices; if you press the F12 key just after the system is turned on, you should get a "Preparing Boot Device List" message, followed by a "Boot Menu". The CD/DVD drive would be "ATAPI CD0:xxxxxx". If that's not listed, then you will have to access the BIOS and change the Startup/Boot setting.
To a lesser extent, the CD/DVD drive may be defective - if it can't read the burnt disk, then that can also lead to the "missing OS" message.
Ray Kawakami
X22;X24;X31;X41;X41T;X60;X60s;X61s;X300;X301;Z60m;Z61t;Z61p;560Z;600E;600X;T21;T22;T23;T41;R50;A21p;A22p;A31 and A31p
Not a Lenovo employee; just a volunteer helping out here
All personal links to PC-Doctor software removed 8/2012 by mfg request

CCMS Operating System Alert Monitor for Filesystem

Similar Messages

Maybe you are looking for