CCMS / RZ20 - BPE Monitoring node
Hello SDN members and happy new year to all,
I just want to know why I have allways following alerts in CCMS concerning BPE :
Deadline Status of deadline monitoring
Process execution Incomplete recovery after system crash
Process scheduling Status of automatic error handling
Process scheduling Status of event queue monitoring
Process scheduling Status of container definition buffer
Overall status Status of the automatic customizing
Process scheduling Status of automatic clean up
Can this be solved or alerts avoided ?
Thanks a lot
Hi Jean,
Do you have solution for the thread u had posted???? Am also intrested in
Process scheduling Status of event queue monitoring
Pls advice.
Similar Messages
-
How to Create Interface specific Monitoring Node in RZ20
Is it possible to create Interface/namepsace specific Monitoring node in CCMS RZ20. If yes, then how??? I need to have this node in ECC system.
Thanks and Regards,
Pallavi SinghHi,
It is possible to achieve this using the MTE class SXMB - this will allow thr highlight of errors within the local IE.
Is this what you need ??
Kind regards
Colin. -
Hi,
we have problems in our xi system (PI 7.0, SPS10). The adapter engine can only be monitored in the communication channel monitoring, available in the runtime workbench!
There sometimes errors disappear. At the moment these errors accumulate!
Is it possible to view these errors/ alerts in the ccms (rz20) monitoring?
So we don't look all the time in the communication channel monitoring!
Have anybody an idea?
Regards,
matthias isenburgHave u seen the discussion
Re: How do I configure an auto-email alert for Adapter engine errors
Regards,
Prateek -
CCMS Configuration - Central Monitoring and Email Alerts with Solution Mgr
I am trying to configure my CCMS alerts on my satellite systems to be linked into the Solution manager system (acting as the CEN monitoring node). If I have already setup my RZ20 alerts, is there a way I can just link these into Solution Manager.
Thanking you for your suggestionsTry setting up the monitoring RFC connections in SMSY. Once those are setup, you can pull the CCMS data in and view within tran SOLUTION+MANAGER.
If you need more detail, just update this message.
Thanks,
J. Haynes -
CCMS agents, alert monitoring, SNMP traps
Hi Guys,
I have a question. There is a requirement about monitoring. Any documenation or links will be really appreciated.
My client needs me to use CCMS agents, alert monitoring for both ABAP and JAVA stacks, SNMP traps, sending SNMP traps, interface CCMS with third party monitoring tools. Mostly, the ,monitoring is done thru RZ20.
Anybody can point me in right direction or material.
Thanks
VenkyHi,
Check these CCMS Weblogs. Really good ones...
/people/federico.babelis2/blog/2006/04/26/ccms-rule-based-monitors-configuration-guide-for-dummies
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3
Feel free to revert back.
--Ragu -
CCMS/RZ20 - Number of free Dialog Workprocesses
Hi experts,
are there metrics available in CCMS/RZ20, which display the available Dialog Workprocess?
I know there is a metric which shows the utilisation in % but I want the number.
Kind regardsHello Christian
as I see in a system with basis and kernel release 7.40 there are MTEs about number of ended WPs and total number of WPs under
RZ20 --> SAP CCMS Monitor Templates
--> Entire System
--> <SID> --> R/3 Services
--> Dialog --> <instance>
There is no such MTE about number of free WPs.
regards, Alwina -
Hi Gurus,
Is it possible to configure CCMS (RZ20) for any spool failure count going beyond a certain threshold value
Is yes, then which node do I configure in RZ20
R..../-Ok I have found the solution.
What you need to do is start the active data suppliers using autoabap:
transaction SE38 => SAPMSSY8 => Execute -
ISE admin , PSN and monitoring node fail-over and fall back scenario
Hi Experts,
I have question about ISE failover .
I have two ISE appliaces in two different location . I am trying to understand the fail-over scenario and fall-back scenario
I have gone through document as well however still not clear.
my Primary ISE server would have primary admin role , primary monitoring node and secondary ISE would have secondary admin and secondary monitoring role .
In case of primary ISE appliance failure , I will have to login into secondary ISE node and make admin role as primary but how about if primary ISE comes back ? what would be scenario ?
during the primary failure will there any impact with users for authentication ? as far as PSN is available from secondary , it should work ...right ?
and what is the actual method to promote the secondary ISE admin node to primary ? do i have to even manually make monitoring node role changes ?
will i have to reboot the secondary ISE after promoting admin role to primary ?We have the same set up across an OTV link and have tested this scenario out multiple times. You don't have to do anything if communication is broken between the prim and secondary nodes. The secondary will automatically start authenticating devices that it is in contact with. If you promote the secondary to primary after the link is broke it will assume the primary role when the link is restored and force the former primary nodes to secondary.
-
Hi,
I do have some doubts regarding CCMS and PMI monitoring..
As of now we are plannig to configure CCMS.But i want to know about PMI.. when it comes to the picture in monitoring.
How PMI is different from CCMS ? and which one is the better option to monitor
Please clarify me...
Regards,
SandeepHi,
Check the thread for details Re: Role of CCMS & PMI in Runtime Workbench?
Thanks! -
CCMS Background Job Monitoring
We have setup CCMS background job monitoring and use it to send alerts for failed CH_* jobs. We activated an autoreaction for Job_Monitoring_Status.
Our autoreaction method has some extra functions to suppress duplicate alerts. It uses the alert text to check this. The standard alert text for Job_Monitoring_Status includes the job id + the end time: e.g.:
u201CCH_APAC_SD_RVV50R10C_DEL_BS_S1 | 03282700 | Termin, started at 12.10.2011,03:28:27 terminated at 12.10.2011,03:28:29u201D
This will let us duplicate suppression fail. We only need the job name in the alert text.
Can we change the message class for the Job_Monitoring_Status? Do we need to write our own message class?Hi,
This is possible and perhaps the link in the thread below should help:
Simple question for CCMS Output format
Regards,
Srikishan -
OS/DB migration : Distribution Monitor nodes
Hi All,
We are in the process of migrating our ECC 6.0 environmnet from Solaris + DB2 to AIX +DB2.
We are using Linix Application server as our Distribution Monitor nodes. In this run we did not get the result as per our expectation. Could please share your experinece or recomendation to use third OS (in our case Linux) for Distribution Monitor Node. Is there any recomendation or best practice for Distribution Monitor nodes -- whether we should use same OS as Source system or Traget OS or we can use any Application Server ( OS).
Regards,
Dipam PhukanBest Approach migrate your ecc 6.0 from solarisDB2 to AIXDB2
if you use migmon or Distubution method its take time . For DB2 migration we can go backup/restore method.
If you are system running on DB2 . you can move any unix to any unix with out using migtaion tools . you can use only backup restore mehtod.
You can use redirected restore to create a Heterogeneous system copy between 2 systems running on different platforms.
sapnote:628156
document:
A:http://www.ibm.com/developerworks/data/library/techarticle/0308nesiem/0308nesiem.html
B:http://publib.boulder.ibm.com/infocenter/db2luw/v9r5/index.jsp?topic=/com.ibm.db2.luw.admin.ha.doc/doc/c0005960.html
Compare to orace , DB2 lot of benefits . if same case required to move with oracle mean you need to migration but DB2 you can backup restore method.
Procedure:
1. use Redirect resore mehtod
2. source system preparation .
run redirect restoer script in source sytem
3. Target system preparation
install fresh system and resore the database from backup using redirect restore
With Regards
Ram
solution Architect for Migrations,upgrades, SAP HAHA -
How to configure CCMS alert to monitor Authorization failures?
Dear All,
How to configure CCMS alert to monitor Authorization failures?
Thanks
AshokHello,
in case you have not yet set up your monitoring infrastructure, the following link will provide you with the information needed:
http://service.sap.com/monitoring
If everything is set up (Agents are installed and connected to your central monitoring system, ...) you can go to transaction RZ21, select Technical Infrastructure - Configure Central System - Assign Central Autoreactions to set up your alerts.
For the Update errors use the MTE CLass AbapErrorInUpdate. For the Lock please use the search Option.
Regards
Christian
Edited by: Christian Rose on Apr 25, 2011 7:59 PM -
Visual Admin - Dispatcher - Monitoring Node issue
Hi all,
On a PI 7.0 SP13,
In visual admin, the monitoring node of the dispatcher section doesn't start fully :
Only both tabs "Properties" and "Additional Infos" are available.
When we try to start the Monitoring service manually, we got the following error message :
Start service Monitoring
java.rmi.RemoteException: Could not start service monitor on cluster ID 4226000; nested exception is:
com.sap.engine.frame.ServiceException: <--Localization failed: ResourceBundle='com.sap.engine.frame.KernelResourceBundle', ID='Service monitor error. Nested exception is: java.lang.NoClassDefFoundError: com/sap/mona/api/MonitoringNode
at com.sap.engine.services.monitor.common.MonitorServiceRuntime.installCcmsConnector(MonitorServiceRuntime.java:662)
at com.sap.engine.services.monitor.dispatcher.MonitorDispatcherFrame.start(MonitorDispatcherFrame.java:53)
at com.sap.engine.frame.CommunicationFrameAdaptor.start(CommunicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
', Arguments: []--> : Can't find resource for bundle java.util.PropertyResourceBundle, key Service monitor error. Nested exception is: java.lang.NoClassDefFoundError: com/sap/mona/api/MonitoringNode
at com.sap.engine.services.monitor.common.MonitorServiceRuntime.installCcmsConnector(MonitorServiceRuntime.java:662)
at com.sap.engine.services.monitor.dispatcher.MonitorDispatcherFrame.start(MonitorDispatcherFrame.java:53)
at com.sap.engine.frame.CommunicationFrameAdaptor.start(CommunicationFrameAdaptor.java:31)
at com.sap.engine.core.service630.container.ServiceRunner.startCommunicationServiceFrame(ServiceRunner.java:228)
at com.sap.engine.core.service630.container.ServiceRunner.run(ServiceRunner.java:158)
at com.sap.engine.frame.core.thread.Task.run(Task.java:64)
at com.sap.engine.core.thread.impl6.SingleThread.execute(SingleThread.java:78)
at com.sap.engine.core.thread.impl6.SingleThread.run(SingleThread.java:148)
Do you have an idea to solve this issue.
Thanks a lot in advance
Edited by: Jean-Charles on Feb 14, 2008 5:02 PMIt is correct one
sorry
The monitoring service is red cross marked as it is not started. when we do rigth click and start we have the message quoted above... -
Backup of monitor node 1.1.4
Hi all,
I'm fairly happy with backups and restoration on the admin node, but not done much with the monitor node.
I think a while ago, I backed up a monitor node and restored it, and seemed to go ok, apart from the gap in logs while you're actually doing the backup/restore.
What I want to know and have not seen any documentation on it, is there a decent way of opening and viewing backed up logs. i.e. accessing the massive raw encrypted file that will be saved off to some network drive somewhere?
I'll give it a try on Monday but not got access to any at the moment.
Sent from Cisco Technical Support iPhone AppHi,
For scheduled backups, you can obtain information about the backup, backup events, and status (when the backup was performed, whether it was successful or not, and so on) from the Backup History page.
Every Cisco ISE administrator account is assigned one or more administrative roles. To perform the operations described in the following procedure, you must have one of the following roles assigned. Super Admin or Monitoring Admin or Helpdesk Admin.
To view the backup history, complete the following steps:
Step 1 Choose Operations > Reports > System.
Step 2 From the System navigation pane on the left, choose Data Management > Administration Node > Backup History.
The Backup History page provides basic information about the scheduled backups that were run.
For failed backups, you must run the backup-logs command from the Cisco ISE CLI and look at the
ADE.log for more information.
Note The backup history is stored along with the Cisco ADE operating system configuration data. After an application upgrade, backup history is not lost and the Backup History page lists all the backups that were run. The backup history will be removed only when you reimage the primary administration node. -
Enterprise Manager is not configured to monitor node rac2
Hi
DB=11.2.0.2
i installed my database on RAC with 2nodes.all of the things is ok:
$ emca -displayconfig dbcontrol -cluster
**************** Current Configuration ****************
INSTANCE NODE DBCONTROL_UPLOAD_HOST
orcl rac1 rac1.irisad.net
orcl rac2 rac1.irisad.net
and i execute command $ emca -reconfig dbcontrol -cluster -EM_NODE rac1 -EM_SID_LIST orcl1,orcl2
but Enterprise Manager is not configured to monitor node rac2 and i see only rac1!!!
what i must to do???pls help.open dbconsole and see if both instance are coming in monitoring tab or not.
http://docs.oracle.com/cd/E11882_01/server.112/e10595/dbcontrol002.htm
Maybe you are looking for
-
Cheque printing. How to avoid last page in case of check printing in F110?
F-68 prints only one page whereas F110 prints 2 pages. How to avoid last page in case of check printing using F110? Is there any other option than changing the Script.
-
ok i removed everything that has to do with the ipod and reinstalled it all but now itunes wont even open it says a porblem has occured and has to close what do i do?
-
Start and stop the Communication channel from Java Mapping
How to start and stop the Communication channel from Java Mapping in XI 3.0 Scenario PI - > MQ -> Third Party web application Web application is down and then Communication channels are stop manually . We need to automate this process, MQ Solutio
-
How do i extract pages?/
How do I extract pages to create one PDF with files from different sources?
-
Nexus 1000V private-vlan issue
Hello /* Style Definitions */ table.MsoNormalTable {mso-style-name:Standardowy; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin