CCMS & Soultion Manager (Please Help)

Hi, Dear
Thanks for great URL, its really help me... I really appriciated it, how may i give you reward points...
One more thing, becuase these documents are only for installation for Solution Manager...
We already installed Solution Manager 4.0 and running fine...and Early watch alrts are running fine...
My question is : -
1. How to setup / configuration for general alerts monitors for-example
We are running XI 3.0, DEV, QAV, PRD, and BI as well
Where should I setup for alert monitor, for-example XI has XML messages are running we want what ever messages or alrts is comes its go through Solution manager and soultion manager will send email them...
Example #1
Lets get one system first, i-e... QA, should I create monitor set first in QA? system like RZ21 and how? if i create monitor set, how to i sent thase messages to solution manager...? and how soulation manager will sent email (need to setup)
Where sould I start, RZ21 or CCMS or will I configure soultion manager first or RFC connection... very confouse
Please help me i will be really appriciated it
Thanks in Advanced

Hi,
I have a 5800 XpressMusic. Don't know if you need all the software stuff? But anyway... Using V 21.0.25. Not sure if it's relevant but I've only had this phone a week. However, the application manager did work at first. It just decided it'd stop working on Friday.
My laptop is Vista, service pack 2 and 32 bits. Connecting via USB.
Thanks,
Kay

Similar Messages

HI! I am using iTunes with Windows 7 64bit.after upgrading itunes to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

HI! I am using iTunes with Windows 7 64bit.after upgrading itunes to 10.5.2.11 it opens only once. If i close it, then it will not open again.the only way to open itunes is by disabling the APSDaemon.exe from the task manager.please help!

Refer this article to reset Winsock to it's default. Your PCTools may have inserted LSP.
http://support.apple.com/kb/TS4123?viewlocale=en_US
After reset and restarting windows, you may get a prompt to remap LSP, click no.

Itunes 7.5 does not open, but it shows up in task manager please help?

please help its been 2 months already and i cant sync my ipod cuz itunes does not open but it shows up on task manager.
i have tried every thing but still it does not work. i have reintall my itunes and quicktime like 20 times i've gone to older version but still does not work.
PLZZZZZZZZZZZZ HELPPPPP. im desperate and tired of liseting to the same songs for 2 months

Let's try to get an idea of what might be going on with some preliminary questions from b noir's "smack" for iTunes launch failures:
Is there an error message associated with the launch failure?
If so, what does it say and what (if any) error numbers are there?
If there's not an error message, let's check your QuickTime (its well-being is a requirement for a functioning iTunes).
Go to the XP Start menu > All Programs and try running QuickTime.
Does it start?
If not, then the same question as for iTunes - is there an error message?
If so, what does it say and what (if any) error numbers are there?
Do you notice any other peculiar behavior with QuickTime?

Dispute management - please help

Hi Gurus,
When I search for a dispute case using transaction UDM_DISPUTE then getting error below. It is not giving any additional information. When I click the message then I am directed to main menu.
no RFC destination could be determined for the method call
Please help,
Regards,
Pavan

Hello
Blue print document is confidential and varies from company to company, how ever I would try to give you some guide lines.
- Understand the scope of sales and distribution, what sub modules of SAP and current business processes have been decided.
- In principle you need to understand the "order to cash " cycle
- At every SD process, relate to FI what documents are being generated
- Some processes like master data creation, credit management policy of the client may be common to SD and FI, so they would part of both the processes
- Use ASAP questionnaires and get feed back, comments and arrive at final list of processes in AR, credit management, collections and dispute management
- Make visio and flow charts for every process in minutest detail
-For every process, ensure , visualise the configuration, test scripts, user manuals etc, so that they would be prepared with ease in the next stage
Reg
assign points if useful

Travel Management - Please Help

Hi All,
While processing Tcode prrw, I am geeting an error that posting run XXXX does not have a valid status. For eg Run no. is 29440.
1. When prrw is executed, run status is "selection is running"
2. Thereafter if we try to post it then system thrpws massage "posting run XXXX does not have a valid status"
Posting Run Management Screen View:
Run POsting Run Name Status user dt chg time chg
29440 Trip Posting Selection is running
When posting run is posted then the error comes ""posting run 29440 does not have a valid status""
Please help to solve this problem
Thanx in Advance
Manish Katyal
Email : [email protected]

Hi,
When it says "selection is running", it is trying to do something. Only when it is completed, it will have a valid status.
Hope this helps,
Reward points if helpful,
Thank You,

Oracle Express Batch Manager-Please Help me out-urgent

Dear all,
I have created a Relational Access Administrator project and mapped an Express Datamodel with RDBMS lookup and fact tables and created a Maintenance Procedure Using "Express Database Maintenance" from "Relational Access Administrator". After that when I tried to run that "Procedure" using "Batch Manager", it creates a Command definition file "~5848371.cmd" and nothing is showing in the "Job Monitor" tab of "Batch Manager". At the same time since it could not run the procedure, no Express database have been created to the specified path.
Please help me out, as I am in need for this very badly. I have gone through the document "Relational Access Administrator(User Guide)" from otn.oracle.com, but nowhere such type of problem have been addressed.
Thanking you in advance,
regards,
Manoj Ghosh,
Mail ID: [email protected]

There is a tutorial on building a chat application (or applet) on the ibm site.
http://www-105.ibm.com/developerworks/education.nsf/dw/java-onlinecourse-bytitle
You need to register to use it, but it is free.
Hope this helps
Peter

I could not synchronize my ipod classic 180gb with itunes. whenever i connect and click podcast tab it gets hanged and no working untill i close all programs from task manager. please. help me

Please help me in this regards.

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Vista OP--Curve 8330---no sync with desktop manager---please help

I have tried the following versions of desktop manager, 4.3 from disk and download, 4.5, and 4.7. Each new version was tried after clean reinstall. Vista OP. I click the sync configure. I get the select a devise application window. I click on any one of the choices, and get the following choices:
<None>
ASCII importer/exporter
yahoo
THERE IS NO OPTION FOR VISTA
I have read many suggestions on this message community which basically say try a different version. THAT DOESN'T WORK. Is there anything else anyone has tried that works with Windows Vista?

Desktop Manager does not recognize any bluetooth drivers (stacks) other than the basic Windows Bluetooth Stack. If you have another bluetooth stack in use, you'll need to remove it and let Windows install the basic bluetooth stack. The downside of this is that you loose some of the advanced features that your current bluetooth stack gives...extra speed, etc. However, that's the only way to make bluetooth work with Desktop manager.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Error while running scheduled job fromEnterprise Manager--Please help ASAP

BEGIN
Hi,
I have created a scheduled job using the below code.
BEGIN
sys.dbms_scheduler.create_job(
job_name => '"M2RT6"."INCR_REFRESH_M2RT6"',
job_type => 'PLSQL_BLOCK',
job_action => 'begin
REFRESH_REPORTS_POETIC(''M2PT6'',''INCR'');
end;',
start_date => systimestamp at time zone 'US/Eastern',
job_class => 'DEFAULT_JOB_CLASS',
auto_drop => FALSE,
enabled => TRUE);
END;
And I tried to execute this job from Enterprise Manager.
I got the below error:
java.sql.SQLException:
ORA-02800: Requests timed out
ORA-06512: at "SYS.DBMS_ISCHED", line 150
ORA-06512: at "SYS.DBMS_SCHEDULER", line 441
ORA-06512: at line 2
Help needed urgently. Thanks for the resolution inadvance.
Thanks,
Sudheer.Vempali

Hi,
This is the bug in Oracle. Most of the times, restarting Oracle database may fix the issue.
Basically, an existing bug needs the oracle database restarts in a regular basis.
Restarting oracle database will flushes the database buffer cache.
Thanks,
Sudheer.Vempali

Oracle Report Manager - Please help

Just a quick question for anyone familiar with this product. We have Oracle Applications/Financials 16.1, 10.7 SC and run on DG-UX. It looks like Report Manager is only available for NT and Solaris.... will the Solaris version work on the DG-UX platform as well?
Thanks in advance,
Darius

hello Thiru
thank u for ur help.
here i donot find necessity of using Distinct and groupby clause.
as the docnos are unique in the table i was referring,further
iam not using any function so as to use groupby clause.
Ofcourse i will try with LOV by calling reports from forms.
This particular table contains 12000 records ,each record has 1
doc no assigned to it.That means i want all the 12000 docs to be
viewed in the parameter so that i can select one doc no to view
that particular report.
regards

Cannot start enterprise manager - please help!

Hello,
I installed 11.2.0.1 on RHEL 5.6.2 64 bit. Before the installation I changed SELinux to permissive mode.
After the installation, I set these variables in /home/oracle/.bash_profile:
export ORACLE_HOME=/opt/app/oracle/product/11.2.0/dbhome_1
export ORACLE_SID=testsid
export ORACLE_HOME_LISTNER=$ORACLE_HOME
export ORACLE_UNQNAME=testsid
PATH=$PATH:$ORACLE_HOME/binHere is the tnsnames.ora file, that has been generated during install:
TESTSID =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.170.76)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = testsid.mydomain.com)
)I started the listener:
$ lsnrctl status
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.170.76)(PORT=1521)))
Services Summary...
Service "testsid.mydomain.com" has 1 instance(s).
Instance "testsid", status READY, has 1 handler(s) for this service...
Service "testsidXDB.mydomain.com" has 1 instance(s).
Instance "testsid", status READY, has 1 handler(s) for this service...
The command completed successfullyAnd the database instance is running:
$ sqlplus sys/sys@testsid as sysdba
SQL*Plus: Release 11.2.0.1.0 Production on Tue Oct 11 16:55:52 2011
Copyright (c) 1982, 2009, Oracle. All rights reserved.
Connected to:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select status from v$instance;
STATUS
OPEN
SQL> select database_status from v$instance;
DATABASE_STATUS
ACTIVEAnd then, I just can't start the EM console!
$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
https://192.168.170.76:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ............................................................................................. failed.
Logs are generated in directory /opt/app/oracle/product/11.2.0/dbhome_1/192.168.170.76_testsid/sysman/log What am I missing here? How is it possible to make a fresh install and not be able to start the EM?
I'll appreciate any help!

1. Ensure that the REPOSITORY_URL configured in the <AGENT_HOME>/sysman/config/emd.properties file has the correct hostname of the OMS machine.
Refer Note 737373.1: Communication: Agent to OMS Communication Fails if the Agent's REPOSITORY_URL Parameter has Incorrect Value
2. If the OMS is secured and locked (accepts uploads only in the https mode), then secure the Agent also.
Refer:
Note 428874.1: How to tell if the EM OMS is locked or unlocked?
Note 283091.1: How To Secure / Unsecure The Grid Control Components (Agent / OMS) In 10g
cd <AGENT_HOME>/bin
emctl secure agent
This will prompt you for the Agent Registration password, which is needed for secure operation to complete.
If the Agent Registration password is not known, it can be re-set using the steps in
Note.433828.1: How to secure an agent when the registration password is not known.

Probleme whith "Order Management" please help

i have this message when i call this API:
HZ_CUST_ACCOUNT_V2PUB.CREATE_CUST_ACCOUNT,
the message is :
1. Please set the Receivables system options for this operating unit and ensure that the MO: Operating Unit profile option is correctly set with an operating unit that is set up in Receivables.
2. Column account_number must have a value.
please can some one help me !
thinks a lot.

think you a lot mister.
i am not the administrator of the base, our base administrator is not here for the moment, i have just the count apps and sqplus to change parameters.
and the request :
select fnd_profile.value('SO_ORGANIZATION_ID') from dual ;
gives as result : 101!
think you for all!.
Message was edited by:
brahim37

Resolve Nodes - For Loop - Instance Manager Please Help

Hello,
I made a table in lifecycle designer that uses the instance manager to add rows.
I want to write code that will loop through each of the instances and perform a comparison. I would like the code to examine the index field. If the index field = 2, then return the value of the num amount field.
This is what I have tried so far and it does not work.
var
var
var
oFields = xfa.resolveNodes("Subform1[*].index1");
var
nNodesLength = oFields.length;
for     (var nNodeCount = 0; nNodeCount < nNodesLength; nNodeCount++)
if (oFields.item(nNodeCount).rawValue ==2)     {
     form1.#subform[2].Table5.Row5.NumericField1.rawValue
     = form1.Page1.Subform1.Capital1.Capital1.detail.numAmount.rawValue;}
break;

Here is a more lengthy definition of my problem.   I hope someone can help.
1.     I have a table that will allow the user to add rows when they click the plus button. Here is the code
----- form1.Page1.Table7.#subformSet[0].#subformSet[1].detailHeader2.Button2::click: - (JavaScript, client)
_detail.addInstance(this.parent.index);
//Invoke the recalculate method to include the field values from the added row in calculations.
xfa.form.recalculate(1);
2.     The table also has a button to delete rows.   Here is the code
----- form1.Page1.Table7.#subformSet[0].detail.Button2::click: - (JavaScript, client) --------------
// Invoke the Instance Manager to remove the current instance of the detail subform.
_detail.removeInstance(this.parent.index);
// Invoke the recalculate method to update the form calculations.
xfa.form.recalculate(1);
3.     The table has a drop down list named txtPartNum and that allows you make a selection. Once you have made the selection a script populates other fields in the same row. The Drop Down list contains this code:
----- form1.Page1.Table7.#subformSet[0].detail.txtPartNum::initialize: - (JavaScript, client) ------
// Populate the part number Drop-down List.
partNoScript.populatePartNo(this);
----- form1.Page1.Table7.#subformSet[0].detail.txtPartNum::change: - (JavaScript, client) ----------
// Populate the description and the unit price when we change the part number.
partNoScript.getDesc(xfa.event.newText, txtDescription, numUnitPrice, index1);
4.     The following script populates the following fields:
txtPartNum,
txtDescription,
numUnitPrice,
index1
----- form1.#subform[2].#variables[0].partNoScript::partNoScript - (JavaScript, client) ------------
// This script object controls the interaction between the part number, description and unit price fields.
// When you fill the partNo, partDesc and partPrice arrays, make sure they have the same number of array indices in
// each array i.e. for every part number, there should be a matching description and price.
// Array of part numbers.
// This script object controls the interaction between the part number, description and unit price fields.
// When you fill the partNo, partDesc and partPrice arrays, make sure they have the same number of array indices in
// each array i.e. for every part number, there should be a matching description and price.
// Array of part numbers.
                     var partNo = new Array(" ",
                                                                "Company Labor - Regular Hours",
                                                                "Company Labor - Overtime Hours",
                                                                "Company Engineering - Regular",
                                                                "Company Engineering - Overtime",
                                                                "Company Burden",
                                                                "Subcontract Labor",
                                                                "Subcontract Engineering",
                                                                "Subcontract Material",
                                                                "Subcontract Equipment",
                                                                "Subcontract Labor & Material Bid",
                                                                "Purchased Materials",
                                                                "Materials from Inventory",
                                                                "Transportation Equipment",
                                                                "Miscellaneous Tools Shope and Garage",
                                                                "Construction Equipment",
                                                                "Rental Equipment",
                                                                "Permits",
                                                                "Legal Fees",
                                                                "Other Miscellaneous");
// Array of part descriptions.
var partDesc = new Array(" ",
                                                                "1221.9922",
                                                                "1222.9922",
                                                                "1221.9922",
                                                                "1222.9922",
                                                                "1221.9922",
                                                                "1232.9933",
                                                                "1232.9933",
                                                                "1232.9933",
                                                                "1232.9933",

Event Management (Please help)

Hello ,
Please I need Help in this topic:
Suppose i have two objects; A and B
I created a custom event . it is possible to trigger this event in object A and
proccess it in object B?
If yes can some one give all the steps to do this and a sample code
many thanks.
please help

Yes. Basically, Object B needs to register as a Listener with Object A. Object A then fires the event. Here's a reply I wrote to a similar post a few months back.
If you want to set-up your object to fire events in the same way as "built-in" Java objects, include the code detailed in the Javadoc API for http://java.sun.com/j2se/1.4/docs/api/javax/swing/event/EventListenerList.html. This enables other objects to register as listeners and to then receive events.
You'll also need to define your own listener interface containing as many methods as you need, plus possibly your own event objects.
e.g. Define an interface MyListener with a single method valueChanged(),
public interface MyListener {
   public void valueChanged(MyEvent event);
} Other objects must implement MyListener and then register as Listeners with your Object.
public class OtherObject implements MyListener {
   public void valueChanged(MyEvent event) {
       ... some code...
   YourObject yourObject = new YourObject();
   yourObject.addListener(this);
} // end of OtherObjectIn YourObject, use the code from EventListListener to implement addListener() and removeListener(). When an event occurs, create the MyEvent object and use the sample code to loop through all the registered listeners (which must implement MyListener) and call valueChanged().
I hope this makes sense - please post again if not.

I'm having trouble downloading application manager, please help?

whenever i try to downoload application manager it always stops and a pop up tells me "sorry, there seems to be a problem with the download process"
I cant find any answers on the forum and i need to download the trial version of after effects, any help welcome.

Are you clicking on the Try link for After Effects from the Creative Cloud Apps page at https://creative.adobe.com/apps?
You can manually download and install the Adobe Application Manager:
Windows link here http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773.
Mac OS X link here http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774.
To use After Effects you do need a 64-bit computer per the Tech Specs here http://www.adobe.com/products/aftereffects/tech-specs.html.

CCMS & Soultion Manager (Please Help)

Similar Messages

Maybe you are looking for