CCMS: switch direct from green to red
Hi all,
we are running NW2004s and I have a problem with CCMS.
I'm monitoring an OS process with MTE_Class Cl_ConfProcessCount and want to get GREEN if the process is running once and switch to RED if the process is not running. But whatever I do in the properties it only shows YELLOW if the process is not running. How do I have to configure the class properties?
Best regards
Andreas
Hi Annu,
just to add to what others have said,
lets take a scenario...where delta have failed..u need to do a repeat delta..in such cases..u need to make the failed request to red from green and delete the request. This will let the infopack know that the last delta is incorrect and when you request for repeat delta...the infopack will fetch the previous records + the present records.
Hope this helps...post back if u need more help.
Assign points if helpful
Rgds
AP
Similar Messages
-
Color 1.5 - tracking suddenly goes from green to red - not working
On our first job in 1.5 I have about twenty shots with tracking information. At a certain point in the grade the most of the menu items became grayed out. I restarted the computer - it fixed that issue, but then all the trackers went from green to red. Which means unprocessed in the manuel.
I had to redo them. Then it happened again. Exactly the same thing.
Is this a known bug?
How can I stop this happening? Never happened in V1.
regards,
MichaelHi JP,
thanks for your reply. Much appreciated.
This is my own project and as you may have guessed I'm my own worst client. I'm working on a multi-cam registration of a theatre performance by my girlfriend. She toured three years with this show which I've recorded and edited. It's autobiographical, quite good and I thought it would be a shame if it wouldn't be documented properly. I'll probably never ever have the budget to cover for the time I've put into this project. I'd like to be proven wrong here. I used to do a lot of music shows, either the editing, dvd authoring or the motion graphics, usually just one of these.
After the edit I tried to enhance the video with Magic Bullet Looks. The vignettes I got with Looks however were static and felt unnatural. As far as I know you cannot keyframe them and if you can one probably enters renderhell. So I thought it would be a perfect opportunity to dive into Color. After Robbie Carman's training on lynda + the 1.5 upgrade I could also do multi-clips, just send to color from FCP… just what the doctor ordered, great!
The semi tight vignettes really do pay off in this case since there wasn't a follow spot in the show. I found that a well placed (animated) vignette makes her face more expressive, more into focus' and really helps to tell the story. I do use non animated large soft edged vignettes whenever I can. Still an 1,5 hours edit takes a long time to work through. Now that I've done it I wonder whether the tracker would have made the workflow faster since I found that I needed 3 to 4 keys, 8 key max for medium length shots. That's usually just in the close and semi wide shots where she would move a lot. I just got frustrated cause that the damned thing doesn't work. And that I've wasted a day or to in trying to get it to work.
As to Shake, Apple always was transparent that is wasn't going anywhere. I just cannot believe that all that potential is not recycled. I can't see it end up in motion, at least I hope not. I mentioned the 3d package and I've noticed that those users are very vocal about what they want, to al the things that suck and are missing. I guess they they get served. I'd be perfectly happy to pay more for the FCP upgrade. If it's worth it. I really don't see apple abandoning the pro line of audio and video app's. It's the haute couture that inspires the pert a porter. Same with cars, racing drives development.
I'd like to think that they've stalled development to make use of all that new stuff they put into snow leopard. But looking at my cpu stats while rendering doesn't make me to happy there either. The spellcheck in snow leopard works wonders though.
Cheers,
Coen -
When does a mountet network drive goes from green to red in colour due to low disk space?
Hi,
I have a number of network shares on MS 2008 R2 servers, that my users have mountet on their Win7 PC's.
What is the limit for when a mountet network drive goes from green to red on the users PC, due to
low disk space.
My guess is below 10% but I can not
find any confirmation of this
anywhere online
Kind regards,
Carl-MariusHi,
As you mentioned, the red bar will display when the drive has less than 10% space.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support -
Can't switch directly from 10.4.8 to 9.2.2
I can't switch directly from 10.4.8 back to 9.2.2. I'm using the startup disk utility. While in 10.4.8, if I choose my 9.2.2 volume I get a crash when 9.2.2 tries to start up. The only workaround I have found is to switch to a 3rd disk (10.3.9) and then restart to 9.2.2. I had no problems switching between X and 9 before I upgraded to 10.4.8. A minor inconvenience at this point, but one I would like to eliminate. Any suggestions?
Other details: 9.2.2 lives on my internal HD, 10.3.9 and 10.4.8 each reside on their own external Firewire drives.
Quicksilver G4 Mac OS X (10.4.8)Try rebuilding the OS 9 desktop.
-
Web-server switch colors from blue to red
Hi,
on a linux-box is a labview-vi running and
I am able to get the vi with the .snap?
or the .monitor?-command over the web.
But the colors of the jpg are switched
from blue to red and red to blue.
Any Idea?
Thanks a lot!
Peter Schmitt
Carl-Schaefer-Schule privat
Hohenzollernstr. 30 Affalterbacher Str.24
71638 Ludwigsburg 71642 Ludwigsburg
Tel.07141/9602-0 07144/863470
Fax 07141/9602-288 07144/863471Hi Peter,
I had the same problem and I didn't find any other solution than change the
display mode to 256 color mode.
Peter Schmitt wrote:
>Hi,>>on a linux-box is a labview-vi running and>I am able to get the vi
with the .snap?>or the .monitor?-command over the web.>But the colors of
the jpg are switched >from blue to red and red to blue.>>Any Idea?>>Thanks
a lot! >Peter Schmitt>---------------------------------------------->Carl-Schaefer-Schule
privat>Hohenzollernstr. 30 Affalterbacher Str.24>71638 Ludwigsburg
71642 Ludwigsburg>Tel.07141/9602-0 07144/863470>Fax 07141/9602-288
07144/863471>---------------------------------------------- -
Hello everyone,
Working with numerous Apple Pages documents at the same time, I am looking for an efficient solution to switch faster from one document to the other. Integrating all them in a single framework, for exemple by switching from one to the other with a system of tabs would be of great help. Does anyone knows if such a possibility exists?
Thanks in advance,
Jean-Baptistejbp- wrote:
Thanks. It works and is very efficient. Not as much as a real system of tabs, but is allows to switch very fast between different documents. Only regret I would have is that it doesn't work with a document which is on full page mode. But that's already very helpful!
You're very welcome but Peggy really gave you the answer already.
With regard to the full screen apps, I don't think Apple have yet worked out how to make them elegantly coexist with other apps. The closest you can get is the four finger swipe gestures you may use on a trackpad if you have one (Mission Control and App Exposé).
In fact nowadays I use the App Exposé (four finger swipe down gesture) more often than I use Command-Accent to move between documents in the same app (when not in full screen). It also as the advantage of showing you thumbnails of recently opened documents below the ones already open within the app. If you haven't tried it, I suggest you give it a whirl.
I can't remember now but I think the four finger gestures are not enabled by default and you must switch them on in System Preferences > Trackpad > More Gestures. -
I am running Firefox 3.6.13 under Mint 9, LXDE Edition. I've noticed its Maximize/Minimize tab in the bar across the bottom of the screen blinks alternately between green and light gray. I've never witnessed this phenomenon while running Firefox under other Linux distros or Windows. Does anyone know what it means?
Many thanks.Hi,
You can try to right-click the taskbar icon, '''Unpin''' it and later '''Pin''' it again. The [http://answers.microsoft.com/ Windows forum] would have different solutions to the problem. -
Dispatcher stops after starting SAP and turning from green to grey
After starting SAP on the SAP Console, the dispatcher turns from green to grey and logging on to SAP is not possible. Below is the developer trace file for the process:
SAPPRD\saploc\PRD\DVEBMGS00\work\dev_disp
trc file: "dev_disp", trc level: 1, release: "640"
Tue Mar 27 14:47:21 2007
kernel runs with dp version 128(ext=102) (@(#) DPLIB-INT-VERSION-128)
length of sys_adm_ext is 312 bytes
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 43
intno 20020600
make: multithreaded, ASCII
pid 3732
***LOG Q00=> DpSapEnvInit, DPStart (00 3732) [dpxxdisp.c 1100]
shared lib "dw_xml.dll" version 43 successfully loaded
shared lib "dw_xtc.dll" version 43 successfully loaded
shared lib "dw_stl.dll" version 43 successfully loaded
shared lib "dw_gui.dll" version 43 successfully loaded
Tue Mar 27 14:47:34 2007
WARNING => DpNetCheck: NiHostToAddr(www.doesnotexist0000.qqq.nxst) took 13 seconds
Tue Mar 27 14:47:51 2007
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 17 seconds
***LOG GZZ=> 2 possible network problems detected - check tracefile and adjust the DNS
settings [dpxxtool2.c 3886]
MtxInit: -2 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: JAVA is not active
DpShMCreate: sizeof(wp_adm) 21528 (828)
DpShMCreate: sizeof(tm_adm) 2219848 (11044)
DpShMCreate: sizeof(wp_ca_adm) 18000 (60)
DpShMCreate: sizeof(appc_ca_adm) 6000 (60)
DpShMCreate: sizeof(comm_adm) 192000 (384)
DpShMCreate: sizeof(vmc_adm) 0 (320)
DpShMCreate: sizeof(wall_adm) (22440/34344/56/100)
DpShMCreate: SHM_DP_ADM_KEY (addr: 04BA0040, size: 2520320)
DpShMCreate: allocated sys_adm at 04BA0040
DpShMCreate: allocated wp_adm at 04BA17A8
DpShMCreate: allocated tm_adm_list at 04BA6BC0
DpShMCreate: allocated tm_adm at 04BA6BE8
DpShMCreate: allocated wp_ca_adm at 04DC4B30
DpShMCreate: allocated appc_ca_adm at 04DC9180
DpShMCreate: allocated comm_adm_list at 04DCA8F0
DpShMCreate: allocated comm_adm at 04DCA908
DpShMCreate: allocated vmc_adm_list at 04DF9708
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 04DF9730
DpShMCreate: allocated wall_adm at 04DF9738
MBUF state OFF
EmInit: MmSetImplementation( 2 ).
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 2264 blocks reserved for free list.
ES initialized.
Tue Mar 27 14:47:52 2007
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG Q0K=> DpMsAttach, mscon ( SAPPRD) [dpxxdisp.c 9736]
CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 6400, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1025]
DpMsgAdmin: Set patchno for this platform to 43
Release check o.K.
Tue Mar 27 14:48:32 2007
ERROR => W0 (pid 5396) died [dpxxdisp.c 12187]
ERROR => W1 (pid 1536) died [dpxxdisp.c 12187]
ERROR => W2 (pid 5404) died [dpxxdisp.c 12187]
ERROR => W3 (pid 1520) died [dpxxdisp.c 12187]
ERROR => W4 (pid 4208) died [dpxxdisp.c 12187]
ERROR => W5 (pid 3584) died [dpxxdisp.c 12187]
ERROR => W6 (pid 4512) died [dpxxdisp.c 12187]
ERROR => W7 (pid 5484) died [dpxxdisp.c 12187]
ERROR => W8 (pid 5488) died [dpxxdisp.c 12187]
ERROR => W9 (pid 5500) died [dpxxdisp.c 12187]
ERROR => W10 (pid 888) died [dpxxdisp.c 12187]
ERROR => W11 (pid 5512) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbf --> 0xbe
ERROR => W12 (pid 5520) died [dpxxdisp.c 12187]
ERROR => W13 (pid 5528) died [dpxxdisp.c 12187]
ERROR => W14 (pid 5532) died [dpxxdisp.c 12187]
ERROR => W15 (pid 5536) died [dpxxdisp.c 12187]
ERROR => W16 (pid 5468) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbe --> 0xbc
ERROR => W17 (pid 5564) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xbc --> 0xb8
ERROR => W18 (pid 1676) died [dpxxdisp.c 12187]
ERROR => W19 (pid 5652) died [dpxxdisp.c 12187]
ERROR => W20 (pid 4704) died [dpxxdisp.c 12187]
ERROR => W21 (pid 1796) died [dpxxdisp.c 12187]
ERROR => W22 (pid 5568) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb8 --> 0xb0
ERROR => W23 (pid 6084) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xb0 --> 0xa0
ERROR => W24 (pid 5704) died [dpxxdisp.c 12187]
ERROR => W25 (pid 3580) died [dpxxdisp.c 12187]
my types changed after wp death/restart 0xa0 --> 0x80
DP_FATAL_ERROR => DpWPCheck: no more work processes
DISPATCHER EMERGENCY SHUTDOWN ***
increase tracelevel of WPs
killing W0-5396 (SIGUSR2)
ERROR => DpWpKill(5396, SIGUSR2) failed [dpxxtool.c 2468]
killing W1-1536 (SIGUSR2)
ERROR => DpWpKill(1536, SIGUSR2) failed [dpxxtool.c 2468]
killing W2-5404 (SIGUSR2)
ERROR => DpWpKill(5404, SIGUSR2) failed [dpxxtool.c 2468]
killing W3-1520 (SIGUSR2)
ERROR => DpWpKill(1520, SIGUSR2) failed [dpxxtool.c 2468]
killing W4-4208 (SIGUSR2)
ERROR => DpWpKill(4208, SIGUSR2) failed [dpxxtool.c 2468]
killing W5-3584 (SIGUSR2)
ERROR => DpWpKill(3584, SIGUSR2) failed [dpxxtool.c 2468]
killing W6-4512 (SIGUSR2)
ERROR => DpWpKill(4512, SIGUSR2) failed [dpxxtool.c 2468]
killing W7-5484 (SIGUSR2)
ERROR => DpWpKill(5484, SIGUSR2) failed [dpxxtool.c 2468]
killing W8-5488 (SIGUSR2)
ERROR => DpWpKill(5488, SIGUSR2) failed [dpxxtool.c 2468]
killing W9-5500 (SIGUSR2)
ERROR => DpWpKill(5500, SIGUSR2) failed [dpxxtool.c 2468]
killing W10-888 (SIGUSR2)
ERROR => DpWpKill(888, SIGUSR2) failed [dpxxtool.c 2468]
killing W11-5512 (SIGUSR2)
ERROR => DpWpKill(5512, SIGUSR2) failed [dpxxtool.c 2468]
killing W12-5520 (SIGUSR2)
ERROR => DpWpKill(5520, SIGUSR2) failed [dpxxtool.c 2468]
killing W13-5528 (SIGUSR2)
ERROR => DpWpKill(5528, SIGUSR2) failed [dpxxtool.c 2468]
killing W14-5532 (SIGUSR2)
ERROR => DpWpKill(5532, SIGUSR2) failed [dpxxtool.c 2468]
killing W15-5536 (SIGUSR2)
ERROR => DpWpKill(5536, SIGUSR2) failed [dpxxtool.c 2468]
killing W16-5468 (SIGUSR2)
ERROR => DpWpKill(5468, SIGUSR2) failed [dpxxtool.c 2468]
killing W17-5564 (SIGUSR2)
ERROR => DpWpKill(5564, SIGUSR2) failed [dpxxtool.c 2468]
killing W18-1676 (SIGUSR2)
ERROR => DpWpKill(1676, SIGUSR2) failed [dpxxtool.c 2468]
killing W19-5652 (SIGUSR2)
ERROR => DpWpKill(5652, SIGUSR2) failed [dpxxtool.c 2468]
killing W20-4704 (SIGUSR2)
ERROR => DpWpKill(4704, SIGUSR2) failed [dpxxtool.c 2468]
killing W21-1796 (SIGUSR2)
ERROR => DpWpKill(1796, SIGUSR2) failed [dpxxtool.c 2468]
killing W22-5568 (SIGUSR2)
ERROR => DpWpKill(5568, SIGUSR2) failed [dpxxtool.c 2468]
killing W23-6084 (SIGUSR2)
ERROR => DpWpKill(6084, SIGUSR2) failed [dpxxtool.c 2468]
killing W24-5704 (SIGUSR2)
ERROR => DpWpKill(5704, SIGUSR2) failed [dpxxtool.c 2468]
killing W25-3580 (SIGUSR2)
ERROR => DpWpKill(3580, SIGUSR2) failed [dpxxtool.c 2468]
NiWait: sleep (10000 msecs) ...
NiISelect: timeout 10000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:42 2007
NiISelect: TIMEOUT occured (10000 ms)
dump system status
Workprocess Table (long) Tue Mar 27 13:48:42 2007
========================
No Ty. Pid Status Cause Start Err Sem CPU Time Program Cl User Action
Table
0 DIA 5396 Ended no 1 0 0
1 DIA 1536 Ended no 1 0 0
2 DIA 5404 Ended no 1 0 0
3 DIA 1520 Ended no 1 0 0
4 DIA 4208 Ended no 1 0 0
5 DIA 3584 Ended no 1 0 0
6 DIA 4512 Ended no 1 0 0
7 DIA 5484 Ended no 1 0 0
8 DIA 5488 Ended no 1 0 0
9 DIA 5500 Ended no 1 0 0
10 DIA 888 Ended no 1 0 0
11 DIA 5512 Ended no 1 0 0
12 UPD 5520 Ended no 1 0 0
13 UPD 5528 Ended no 1 0 0
14 UPD 5532 Ended no 1 0 0
15 UPD 5536 Ended no 1 0 0
16 UPD 5468 Ended no 1 0 0
17 ENQ 5564 Ended no 1 0 0
18 BTC 1676 Ended no 1 0 0
19 BTC 5652 Ended no 1 0 0
20 BTC 4704 Ended no 1 0 0
21 BTC 1796 Ended no 1 0 0
22 BTC 5568 Ended no 1 0 0
23 SPO 6084 Ended no 1 0 0
24 UP2 5704 Ended no 1 0 0
25 UP2 3580 Ended no 1 0 0
Dispatcher Queue Statistics Tue Mar 27 13:48:42 2007
===========================
--------++++--
+
Typ
now
high
max
writes
reads
--------++++--
+
NOWP
0
3
2000
10
10
--------++++--
+
DIA
6
6
2000
6
0
--------++++--
+
UPD
0
0
2000
0
0
--------++++--
+
ENQ
0
0
2000
0
0
--------++++--
+
BTC
0
0
2000
0
0
--------++++--
+
SPO
0
0
2000
0
0
--------++++--
+
UP2
0
0
2000
0
0
--------++++--
+
max_rq_id 14
wake_evt_udp_now 0
wake events total 9, udp 8 ( 88%), shm 1 ( 11%)
since last update total 9, udp 8 ( 88%), shm 1 ( 11%)
Dump of tm_adm structure: Tue Mar 27 13:48:42 2007
=========================
Term uid man user term lastop mod wp ta a/i (modes)
RM-T26, U27, , SAPPRD, 14:48:24, M0, W-1, , 1/0
Workprocess Comm. Area Blocks Tue Mar 27 13:48:42 2007
=============================
Slots: 300, Used: 2, Max: 1
--------++--
+
id
owner
pid
eyecatcher
--------++--
+
0
DISPATCHER
-1
WPCAAD000
1
DISPATCHER
-1
WPCAAD001
NiWait: sleep (5000 msecs) ...
NiISelect: timeout 5000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:47 2007
NiISelect: TIMEOUT occured (5000 ms)
Shutdown server ...
DpJ2eeDisableRestart
DpModState: buffer in state MBUF_PREPARED
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIModState: change state to SHUTDOWN
DpModState: change server state from STARTING to SHUTDOWN
Switch off Shared memory profiling
ShmProtect( 57, 3 )
ShmProtect(SHM_PROFILE, SHM_PROT_RW
ShmProtect( 57, 1 )
ShmProtect(SHM_PROFILE, SHM_PROT_RD
DpWakeUpWps: wake up all wp's
Stop work processes...
Stop gateway
killing process (1844) (SOFT_KILL)
Stop icman
killing process (5376) (SOFT_KILL)
Terminate gui connections
send SHUTDOWN to REM TM 26
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
return errno (-17) to T26
errormsg without overhead: take mode 0
NiBufIAlloc: malloc NiBufadm, to 0 bytes
try to send 14 to M0
NiBufSend starting
NiIWrite: write 14, 1 packs, MESG_IO, hdl 7, data complete
REL WP ca_blk 2
set status of T26 to TM_DISCONNECTED
NiSelClear: removed hdl 7 from selectset
DpDelSocketInfo: del info for socket 7 (type=3)
NiBufClose: clear extensions for hdl 7
NiBufSetStat: bufstat of hdl 7 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 7 / socket 1216
dp_tm_adm[26].stat = DP_SLOT_FREE
DpGetSchedule: next schedule 1175003332
DpGetSchedule: no schedule found
DpITmSlotRelease: release slot 26
DpListInsert: insert elem 26 into tmadm_free_list (at begin)
DpListInsert: 175 elems in tmadm_free_list
DpListRemove: remove elem 26 from tmadm_inuse_list
DpListRemove: 26 elems in tmadm_inuse_list
[DpProcDied] Process lives (PID:1844 HANDLE:1500)
waiting for termination of gateway
NiWait: sleep (1000 msecs) ...
NiISelect: timeout 1000 ms
NiISelect: maximum fd=1521
NiISelect: read-mask is NULL
NiISelect: write-mask is NULL
Tue Mar 27 14:48:48 2007
NiISelect: TIMEOUT occured (1000 ms)
[DpProcDied] Process died (PID:1844 HANDLE:1500)
[DpProcDied] Process died (PID:5376 HANDLE:1492)
DpHalt: cancel all lcom connections
MPI CancelAll 2 -> 0
MPI DeleteAll 2 -> 0
NiIMyHostName: hostname = 'SAPPRD'
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 4 (AD_STARTSTOP), ser 0, ex 0, errno 0
DpConvertRequest: net size = 163 bytes
NiBufSend starting
NiIWrite: write 562, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 562 bytes
send msg (len 110+452) to name -, type 4, key -
detach from message server
***LOG Q0M=> DpMsDetach, ms_detach () [dpxxdisp.c 9962]
NiBufSend starting
NiIWrite: write 110, 1 packs, MESG_IO, hdl 3, data complete
MsINiWrite: sent 110 bytes
MsIDetach: send logout to msg_server
MsIDetach: call exit function
DpMsShutdownHook called
NiSelClear: removed hdl 3 from selectset
MBUF state OFF
AdGetSelfIdentRecord: >
<
AdCvtRecToExt: opcode 60 (AD_SELFIDENT), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
AdCvtRecToExt: opcode 40 (AD_MSBUF), ser 0, ex 0, errno 0
blks_in_queue/wp_ca_blk_no/wp_max_no = 2/300/26
LOCK WP ca_blk 2
make DISP owner of wp_ca_blk 2
DpRqPutIntoQueue: put request into queue (reqtype 1, prio LOW, rq_id 20)
MBUF component DOWN
NiBufClose: clear extensions for hdl 3
NiBufSetStat: bufstat of hdl 3 changed from OK to OFF
NiICloseHandle: shutdown and close hdl 3 / socket 1504
MsIDetach: detach MS-system
EsCleanup ....
***LOG Q05=> DpHalt, DPStop ( 3732) [dpxxdisp.c 8495]
Good Bye .....what is the name of your hostname? 'pun-idmqa-vm1'?
Try changing the hostname for another one with 8 characters...
good luck, -
I can't scan from my HP Photosmart C4440; not direct from the scanner to pc nor vice versa
I can't scan from my HP Photosmart C4440; not direct from the scanner to pc nor vice versa, Please help me ASAP, Thanks everyone, I'm stuck with a homework!
Hello @Roberto3 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you are having issues scanning. I'd like to help!
Are you able to make a copy as opposed to a scan?
Do you have any errors come up when scanning?
I'd recommend starting with a power reset. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would also recommend downloading and running the HP Print and Scan Doctor.
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green. -
AP 1142 Rapidly cycling through blue, green, and red
Hello
After the upgrade of the WLC 5508 to version 7.4 the 1142 access-points LED blinking rapidly cycling through blue, green, and red. I found the followinung information to this behavior: "Access point location command invoked"
The configuration didn't change. What exactly means that? How can I switch this function?
regards
PascalConsole into the AP and see what's going on. The output will tell you what is happening. If you can't determine the issues from the output, please attach it on this thread. Makes sure you get the whole process from boot up.
Sent from Cisco Technical Support iPhone App -
I switched over from an iPhone to a Samsung Galaxy S3 & I haven't been able to receive any text messages from iPhones. I have no problem sending the text messages but I'm not receivng any from iPhones at all. It has been about a week now that I'm having this problem. I've already tried fixing it myself and I also went into the sprint store, they tried everything as well. My last option was to contact Apple directly. Please help with turning my iMessage completely off so that I can receive my texts.
If you registered your iPhone with Apple using a support profile, try going to https://supportprofile.apple.com/MySupportProfile.do and unregistering it. Also, try changing the password associated with the Apple ID that you were using for iMessage.
-
Deleting photo's ( taken on ipad2 camera ) on the camera roll directly from ipad
I am new to all this stuff....as Grannies are....but here goes...
I just got an iPad2 with the iOS5 ( the only apple device I have ). I have had it 8 Days....
I took some photos with the iPad2 camera then I transferred them to a new album, following the directions in the downloaded User's Guide.
That worked OK.
Now I want to delete some photo's from the Camera Roll. Looked up how to delete from Camera Roll in the U/Guide which says...Open Camera, tap box in the lower L/H bottom corner, open a photo, then tap garbage bin.
I have done all this but instead of saying, in the red box, " Delete Photo ", as it should, it says " Delete Everywhere " which takes the photo out of the Camera Roll as well as the album it was put into. I tried it out once and it did delete from both places. !!!
Then when I open Photo's, then open an album and tap on a photo and follow what the U/Guide tells you to do, open a photo then tap the Garbage bin, I get the same message there too " Delete Everywhere "
There seems to be no way to change from Delete Everywhere to Delete Photo. ???? AND it also altered a photo in another completely different album ( one that I synced from my PC ) in that, instead of a photo, I now have a light grey square with a question mark in the centre of it in place of the picture , yet when I tap on the grey square the photo then opens. ????
Can anyone help please ?I have managed to find a fix for my problem .
I have discovered the following…..To Delete Photos from Camera roll.
If when you open “Camera” on your iPad , you have photos on your camera roll that you haven’t put into an album directly from the camera roll in “ Photos” then you can Delete them as the User Guide states eg. …Open Camera … tap the thumbnail box in the lower L/H bottom corner and a bigger display of thumbnails of your photos will appear….tap the box with the arrow in it on the upper R/H side….then tap on the thumbnail , this will put a blue circle with a white tick in it on the lower R/H corner of that thumbnail and the Red Delete button will come alive…..tap the delete button and you will get a drop down saying …Delete Photo…tap this and the photo will disappear and it will also disappear from the little thumbnail box in the lower L/H corner….do this with all photos …then tap Done……you will now have an empty camera roll.
HOWEVER…….if in “ Photos” you have put any of these photos that are on the Camera roll album into other albums directly on your iPad you will NOT be able to delete them in this manner..….When you open “ Camera “ and pull up your thumbnails and follow the above process the Drop down from the Red Delete button will say…Delete Everywhere…meaning from the camera roll and the particular Album you have that photo in……in short you will loose the photo completely.
This next bit is for those of us who have PC’s that are not Apple.
I plugged my iPad into my computer via the Dock connector to USB cable that came with the iPad and copied the camera roll onto my PC using the Microsoft Photo Wizard to load all the photos I had taken with my iPad camera onto my PC’s …My Pictures….they all transferred OK….I disconnected the cable from the iPad to the PC. Then on the PC with MY Pictures open I sorted and renamed and created folders /albums to suit my needs…..
Now make Blank Folder in My Pictures and leave it sit there empty.
OK now time to clear the IPad of all the stuff I don’t want on there.
Now you can go back into “Photos” on the iPad and use the “Delete Everywhere” or button and it will do that. You can also go back into “Camera” and make sure that all of the camera roll is deleted as well. You should end up with no Camera roll in either the Photos or Camera apps.
Pull up iTunes on the PC….Plug in the cable again….Click on Device name and you get a sync menu…click on photos …tick sync to iPad and then choose selected albums…..and then tick the albums you wish to copy to your iPad and click on apply…..this will then only sync those photo albums you have ticked….Yay !
Now I had some problems with some photos disappearing and leaving just a light grey square with a question mark in it, in the place where the photo should have been ,whilst I was trying to delete the camera roll ( see first discussion) before I worked out a way to do it so I chose to Delete ALL the albums I had previously synced from my PC to fix that as well….and no, I don’t know what caused that to happen, however,
……… To do this I did as above…with the sync menu open click photos…then tick selected albums…. Then selected the Blank Folder I had created earlier on my PC and Nothing else…...then click apply… your screen may ak if this is what you want to do.....this will delete all the photos on the iPad that have been synced on there before. ……
Now with everything back to blank screens you can go ahead and select those albums you do want on your iPad from your computer and resync .
This method has worked for this “ Granny “ and I didn’t have a huge amount of photos on the camera roll so it may be a bit long and laborious if you do have a gazillion photos on your camera roll and I don’t know about bulk deleting…….but I now have a working iPad and only the Photos I want on it and no grey squares with question marks.
This may be a bit long winded as an article but I hope it can help someone else to sort out their problems, as I have now done, and after looking at many sites for help info there appears to be quite a bit of confusion out there with these apps.
Happy Now...
Granny 2012. -
Wanting to use Photoshop CS6 to open images directly from iPhoto 11.
Using OSX10.8.2 and iPhoto 11. Just installed Photoshop CS6 and want to open
images directly from iPhoto. Before I installed PS I was not able to edit photos
in iPhoto 11. Nothing happens when I click on ‘edit‘ it is blank.
And now it will not work using Photoshop CS6 either.
From Help Center I have gone to iPhoto/Preferences/ Advanced and chosen Photoshop CS6 to Edit Photos but then cannot find an 'Open' to click? Perhaps this is the problem?
When I select a photo in iPhoto and click the Edit button - nothing happens.
Please advise. GlenysThis may be of help to you:
Using Photoshop or Photoshop Elements as Your Editor of Choice in iPhoto.
1 - select Photoshop or Photoshop Elememts as your editor of choice in iPhoto's General Preference Section's under the "Edit photo:" menu.
2 - double click on the thumbnail in iPhoto to open it in Photoshop. When you're finished editing click on the Save button. If you immediately get the JPEG Options window make your selection (Baseline standard seems to be the most compatible jpeg format) and click on the OK button. Your done.
3 - however, if you get the navigation window
that indicates that PS wants to save it as a PS formatted file. You'll need to either select JPEG from the menu and save (top image) or click on the desktop in the Navigation window (bottom image) and save it to the desktop for importing as a new photo.
This method will let iPhoto know that the photo has been editied and will update the thumbnail file to reflect the edit..
NOTE: With Photoshop Elements the Saving File preferences should be configured as shown:
I also suggest the Maximize PSD File Compatabilty be set to Always. In PSE’s General preference pane set the Color Picker to Apple as shown:
Note: to switch between iPhoto and PS or PSE as the editor of choice Control (right)-click on the thumbnail and select either Edit in iPhoto or Edit in External Editor from the contextual menu. If you use iPhoto to edit more than PSE re-select iPhoto in the iPhoto General preference pane. Then iPhoto will be the default editor and you can use the contextual menu to select PSE for your editor when desired.
OT -
Switching subscription from Windows to Mac
I have a CC subscription and would like to switch it from my Windows computer to my Mac. I made a few searches but I'm having a brain-fart on good search terms and haven't found what I'm looking for.
Is there a step-by-step for making this switch? Or could someone point me in the right direction?
Your time is most appreciated - and observed in good thoughts.
All the very best!There is no need to switch. You are allowed to have the software installed and working on two machines, and since it is CC it means you can have mixed systems, meaning one installation could be Windows and one could be Mac. So you only need to be concerned with installing on the Mac. If you want to you can sign out of the Windows installation, but it is not required.
-
Importing directly from Dvcam didn't work
I have a few cameras that go to a switcher, which is plugged into a Sony Dvcam (records to tapes). I stopped using the tapes a while ago and recorded live to iMovie with Fire wire.
I recently got a new MacBook Pro with Final Cut Pro, so I connected the Dvcam to it with the fire wire and a thunder bolt adapter.
Anyway, Final Cut Pro did not record directly from the Dvcam. On iMovie, I would just click Import and it would record. But I clicked import on Final Cut pro, and it looked like it was importing. After an hour, I clicked Stop Importing and I realized that nothing was recorded and I lost everything.
After messing with the Dvcam and FCP, I noticed that it does import if I have a tape playing. But it doesn't import if there's no tape??? I don't get it, why can iMovie do this but not FCP?
Another thing I notice is that FCP gives control to the Dvcam and vice versa, which I don't want. For example, if I click import while there's a tape in it, it will play whatever was on the tape and starts importing that. Or if I stop recording on the tape, the importing will end. Overall though, I don't even want to use tapes if I don't have to. But I use the Dvcam because I have the Fire wire output (which I now connect with the thunder bolt adapter).So is there any way I can still record live from dvcam to FCP?
I would just record in iMovie and edit in FCP, but importing dv iMovie projects = no audio in FCP apparently.
Maybe you are looking for
-
Conditional Header and Footer description print in Report
Hello, Is it possible to print different header or footer of a report depend on condition. My requirement to change the header and footer description on a fly depend upon the parameter passed to the report. Any soultion ... Sam
-
Blu-ray movies no longer play on ANY program
To whom it may concern, I purchased Corel WinDVD Pro 11, hoping it would resolve an issue I'm having with playing blu-ray movies on my HP as of late. HP MediaSmart randomly stopped working (note, I have changed nothing on the computer since it stoppe
-
New 80GB ipod - red cross with support website
Hi I was connecting my new ipod (only 3 weeks old) to my macbook leopard when suddenly a red cross symbol came up on the screen with the address of the mac support website at the bottom. I went to the website and it suggested I put it in disk mode. T
-
The Share Operation has failed: QuickTime Error: -50
I just updated to FCP X 10.0.8 and all of the sudden I am getting share errors when I attempt to export. I have tried sharing to youtube and sharing for apple devices at 1280px X 720px using H.264 codec. Each time I get a quicktime error: -50. I am
-
Like the rest of you......ever since the downloaded update, my email won't download my email from mail client. Has anyone solved this problem yet? I know some have said it's gone away on it's own, but so far not my case. I'm getting very frustrated,