CCMS threshold Value baseline calculation

Hi Guys,
I am looking CCMS threshold value baseline calculation for ECC, BW, XI, SRM, CRM, APO & Solman systems. Many portals are provided the description of each MTE class , but not provided baseline calculation.
Please let us know some expertise advice
Thanks.
Manjunath

Dear. Marc P. Gilomen.
I totally understand what you are written above.
The threshold value shouldn't be changed until I change the rule related to the product.
However, after I changed the rule, I have expected the threshold value should be changed according to the rule.
But, it's not.
This is the point.
After I change the rule, for example 35% to 45%, the threshold value of GTS preference determination transaction '/SAPSLL/PRECA01' is changed. But, The replicated sales order's threshold value is not changed. And delivery, billing is the same with salesorder also.
It's not changed whatever I do.
So, I want to solve this problem. But until now, I didn't find the answer.
Thank you for reading.
Best regards,
Jong Hwan

Similar Messages

CCMS threshold values

Hi all,
I'm in the process of configuring CCMS threshold values for the ECC server. We are trying to configure the virtual memory,virtual cpu and LAN error threshold values. By default the threshold value is 2147483,647 MB for all the three . Now our requirement is when the virtual CPU is exceeding 75% it need to trigger an alarm and needs to change from green to yellow. We dont have idea of where from this default value is being pickedup.
How to calulate the threshold value for virtual cpu,memory and lan.
Can anyone throw some light on this issue?
Regards,
Rajagopal

Hi Michael Ruth ,
Thanks for the response. The link gives just a over all view of changing the values. But what my requirement is how to calculate the virtual memory,cpu . Where can i see the virtual cpu,memory values. By default it is taking a value which is huge in size. My installations are on VM ware. Kindly let me know as how to proceed further to complete my configuration.
Regards,
Rajagopal

Threshold value problem.

Hi, experts.
Now, I'm testing the preference calculateion.
After I save sales order document, the sales order I saved is replicated to the GTS server.
And, the threshold value is calculated by the system.
In my understanding, the threshold value should be come from the rule that is assigned to the relevant product.
When I excuted the preference calculation in GTS system, the threshold value is calculated correctly.
But, after the GTS system get the sales order document from the ERP system the value is different from the value of the preference calculation excuted in GTS system.
And even I changed the rule's condition(%), the threshold value of the sales document in GTS system is not changed.
But, the threshold value of GTS's preference calculation transaction is changed whenever I changes the rule.
I want to know how to solve this issue.
The threshold values shouldn't be different from each other.
Thank you for reading.
Best regards,
Jong Hwan.
Edited by: Jong-Hwan Park on May 26, 2011 5:11 AM

Dear. Marc P. Gilomen.
I totally understand what you are written above.
The threshold value shouldn't be changed until I change the rule related to the product.
However, after I changed the rule, I have expected the threshold value should be changed according to the rule.
But, it's not.
This is the point.
After I change the rule, for example 35% to 45%, the threshold value of GTS preference determination transaction '/SAPSLL/PRECA01' is changed. But, The replicated sales order's threshold value is not changed. And delivery, billing is the same with salesorder also.
It's not changed whatever I do.
So, I want to solve this problem. But until now, I didn't find the answer.
Thank you for reading.
Best regards,
Jong Hwan

Tables for threshold value in GTS 11

Good morning,
to get away from our old ERP preference calculation we bought a license for GTS. At the moment we are discussing implementing version 10.1 or even 11.
I am worrying as I am not sure, how to put data out of GTS to BI (BW) with version 11. We need the price and the threshold value (former table MMPREF_PRO_....) and those for the vendor declaration from supplier and the compression. (LFEI/MAPE).
Does anybody has experience with getting this into BI? And the "new" tablenames in GTS?
Hope, my questions are not too dumb, but we are just starting.
Thanks for any help and have a nice day.
Rgds Alex Linck
Kostal Germany

Hi ,
Customize as per the path given below for the GTS to BI(BW) data replication.
IMG : Integration with Other mySAP.com Components >> Data Transfer to the SAP Business Information Warehouse >> General Settings >> Maintain Control Parameters for Data Transfer.
GTS > General Setting > Document Structure > Define Document Types Turn on > Transfer to SAP Netweaver BI Active flag .
GTS > General Setting > Document Structure > Define Item Categories > Transfer to SAP Netweaver BI Active flag .
GTS > General Setting > Organizational Structure > Control at Foreign Trade Organization [FTO] for SAP NW BI > In the BI Active column, this flag is turned on for active FTOs.
Ashish

SAPCCMSR agent installation and integration with threshold values

Hi!
I have successfully configured CCMS monitoring for ABAP stack.
Now I consider to monitor the J2EE stack.
My questions:
Is there some suitable documentation for:
- set up of SAPCCMSR agent
- integration of threshold values for the SAPCCMSR
How much effort should be investigated for the these actions?
Any helpful information will be appreciated
regards
Thom

Check this [document|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/304fe0af-804a-2a10-49ab-bc48e0cd147d]
Thanks
Prince Jose

CProject 4.0 evaluations - Define Threshold Values

Hello All
I need to set the Threshold Values so that the status icons can be showed on the dashboard.
I followed the installation guide but i wasn't`t so clear for me, the system provides some templates.
But most of the templates that appears on the 000 client are referred to resource asignment or work accomplishment. At this moment i need to set the alerts by schedule. Meaning that we want to set an alert depending on how far is the real date from the scheduled on task, checklist, etc
I would like to know if there are any documentation about how to configure this or anybody can give me a hint on this subject?.
Thank you all in advance for your help
Regards
Gaston

The documentation is a little 'thin' in this area and the 'Define Thresholds' function is a bit strange to use.
So here's an example:
Assume that I have created an evaluation that includes planned start date (SCHEDULED_START).
Create a threshold value based on your evaluation, give it a name and choose 'TASK' for object category (you can leave it blank to mean all objects if you want to)
Click on the "a/b" button and go into the formula definition.
In here you build your formula by selecting fields, adding the operators (+ - > < = etc) and entering numbers or strings.
The example formula below triggers a threshold 5 days after the planned start date where the status is not complete.
( Calculated Start Date + 5 ) > Current Date AND System Status for an Object as a String <> 'I1702'
You can also toggle between this view and the 'Technical' view which allows you to type the formula in directly using field names (example below):
( SCHEDULED_START + 5 ) > SYST-DATUM AND SYSTEM_STATUS <> 'I1702' AND TSK_TYPE = 'ZPF_STANDARD'
Hope this helps
Paul

In import process,how excise base value is calculated in MIGO

Hi expert's,
In import process,how excise base value is calculated in MIGO,with what referance values get add to base value.
waiting for your valuable response,
Regards
V.raj

hi,
we Tried with your following reply ! but still not finding exact value in base value .
(MATERIAL PRICE* QTY IN MIGO * EXCHANGE RATE)
thanks & regards
V.Raj

How to set threshold value for single tablespace in grid control 11g

Hi,
I want to set the threshold value for a single tablespace in grid control 11g,
please provide me a navigation path.

Sandy wrote:
Can you please provide me the full navigation path?go to Targets --> Databases
Select the Database you like to set this alert for
Select link Metrics and Policy Settings

Managing threshold value of document library

Hi,
We are managing below stuff through .net application
1)Uploading the document to current Month folder in a document library , While uploading a document check for the current month folder , if it does not exists create a new folder with month and year format.
2) After uploading a document, storing the file URL in SQL table i.e. through stored procedure.
3) While retrieving we are using the DB link to display the pdf in application.
Now have migrated this to SharePoint 2010
We are using share point 2010 document library, with multiple folders. The library has now exceeded 5,000 items.
As a result it is not allowing the users to update the documents to a document library, now we are receiving a list view threshold error.
So now my question is if I increase the threshold value, will it be proper solution?
After increasing the threshold value, will the performance be affected?
Please share your ideas/thoughts on the same.
Regards,
Sudheer
Thanks & Regards, Sudheer

Hi,
Instead of increasing the threshold limit,finally i felt folder structure would be good enough i.e
1) Generally for the bulk documents if pretty good enough i.e.
Uploading the documents in the folder week wise of the document library.
So in case if there are 1000 documents in the folder, count would be 1 only.
So this is a good practice for the large number of documents to upload in document library.
2) Coming to file path,
After uploading the document, file path can be saved under column of type hyperlink in the list.
Same folder structure can be followed to save file path in the list
3) We can fetch the file path from the list to display the pdf.
Please correct me if i am wrong.
Regards,
Naga Sudheer M
Thanks & Regards, Sudheer

CONDITION BASE VALUE / ALT CALCULATION TYPE Pricing

Dear All,
I have a scenario where in I want the condition base value for calculating the value for a condition type to be based on
Gross weight - Net weight value of a material.
Is it possible and if yse how do I acheive the same.
Deepak

Deepak,
Alternative Calculation Type:
Normally if you want to calculate a value you have to use a calculation type for determinating the value. This calculation type is either addition, subtraction or multiplication. Similarly SAP also has got a default calculation type in the control data of the condition type. There you have the options of either Qty based , Fixed Amount Based or Percentage based.
Here what happens is suppose if you define Your condition type that calculates the base price of a material on Qty based. Then the calculation will be done based on the quantity of the material. If the customer orders 10 Nos and you have maintained a unit price of 100 Rs for each material then the value determined is 1000 INR. Similarly if the discount condition type , you maintain the calculation type as %. This means if you maintain the value of 10 % in the condition record. Then this percentage is taken as the calculation type and the condition value is determined.
In some cases you have to forego the default calculation types and use the customer specific method for calculating a value. For ex if you are calculating the Freight charges for a Material . it depends on so many criteria like, the weight, volume and also the minimum amount etc etc, in those cases, you forego the default value and then use the alternative calculation type in calculating the condition value against the particular condition.
Alternative Condition Base value :
If you have to calculate any value then you have to have a base value for it. For ex if you want to calculate the discount of 10 % for a material then you have to have a base value on which this 10% is calculated. Normally you take the condition value of the base price of the material to calculate the value.
Now you don't want to take the base value and take other values as base value which are derived on some formulae. So you create a routine which will do the mathematical operations in the routine and derive you a value which is now used as the base value for calculating the condition value for a particular condition type.
Reward poitns if u finds this helpful....
Regds
MM

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

: Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
The FP-1000/1001 seri
al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
Regards,
Aaron

Adding threshold values in an existing query

Hi All,
I have to update an existing query.
The original query gives me the value of Debtors to sales ratio for each division (DTR value).
Now, I want that for each division, there be a threshold value which should be compared with the debtor's value and if found higher than the threshold, the result should be in red.
The result being in red can be done at the front end, which in my case is Cognos.
But to store different threshold values for diffrerent divisions and then compare them with the debtor's values of the query, do I need to have a separate cube wherein I should store the divisions and their threshold values?
Or how can I go about it?
Thanks and best regards,
Sharmishtha

Hi Nagesh,
I do not have those values in the system but will be getting as external data only.
Divisions and debtors are separate info objects.
I have 12 debtors KFs (for 12 months) which get filled by an APD (data source is a query).
So, my final query has divisions in the rows and 12 debtors in the colm.
So, now i'll be given some threshold debtor value for each division which I need to bring in the query as a KF which can be compared in the query output.
So, what you suggested will it work in this requirement?
Also, can you elaborate on the method I need to follow?
Thanks a lot,
Sharmishtha

Consideration of factory calender in threshold values

Hi,
I need to consider the factory calender in the threshold values to check the due date of a task or a checklist item.
For example:
The task/or checklist item is due in 11 days (and the factory calender should be condsidered)
Does anybody know how to implement these checks in the threshold values of cprojects?
Thanks for your help!
Isabella

Dear Friend,
Ideally you should not change anything on Production server directly.
The normal & universally acceptable way is to transport the changes from Development or Quality to Production.
Still if you want to make changes on Production Server Directly (which even i dont recomend) you need to make Production Server in change mode thru T-Codes SCC4 & SE03 & make necessary changes.
Let me know if you need to know how to use T-Codes SCC4 & SE03.
Thanks,
Jignesh Mehta

Threshold value for price changes

hello,
We are trying to change the price for material and getting error Threshold value for price changes was exceeded
msg no is CKPRCH 032
Being Sd guy I'm not able to understand where we need to check and what changes to be done
Please guide
Regards
Vishal Jajoo

Dear friend
For that u check the following path
spro>> material management>> logistics invoice verification>>invoice block>>> stochastic block
please check here for your plant your activated, if you activated then this error will appear
regards
Pramod

In FD32 why credit value is calculating at cash sale cycle

Hello Every body
In credit management, customer having credit limit and also having in ova8 it is static credit limit check in sales order level.
My question while customer take cash sales in sales order level, he adopted payment terms as cash sales.
In system created order - delivery - invoice and later i am verified in FD32: credit value is calculating.
My question while doing cash sales credit limit it should not calculate.
Please give me your valuable advises
Thanks,
Prasad

Hi,
Ideally your cash sales order type is different from the normal sales .
So in OVAK , do not assign the check credit and credit group. Leave it blank.
So system will not performed the credit check for cash cycle .
Hope this will resolve your issue.
Regards,
Krishna O

CCMS threshold Value baseline calculation

Similar Messages

Maybe you are looking for