CCMS threshold values

Hi all,
I'm in the process of configuring CCMS threshold values for the ECC server. We are trying to configure the virtual memory,virtual cpu and LAN error threshold values. By default the threshold value is 2147483,647 MB for all the three . Now our requirement is when the virtual CPU is exceeding 75% it need to trigger an alarm and needs to change from green to yellow. We dont have idea of where from this default value is being pickedup.
How to calulate the threshold value for virtual cpu,memory and lan.
Can anyone throw some light on this issue?
Regards,
Rajagopal

Hi Michael Ruth ,
Thanks for the response. The link gives just a over all view of changing the values. But what my requirement is how to calculate the virtual memory,cpu . Where can i see the virtual cpu,memory values. By default it is taking a value which is huge in size. My installations are on VM ware. Kindly let me know as how to proceed further to complete my configuration.
Regards,
Rajagopal

Similar Messages

  • CCMS threshold Value baseline calculation

    Hi Guys,
    I am looking CCMS threshold value baseline calculation for ECC, BW, XI, SRM, CRM, APO & Solman systems. Many portals are provided the description of each MTE class , but not provided baseline calculation.
    Please let us know some expertise advice
    Thanks.
    Manjunath

    Dear. Marc P. Gilomen.
    I totally understand what you are written above.
    The threshold value shouldn't be changed until I change the rule related to the product.
    However, after I changed the rule, I have expected the threshold value should be changed according to the rule.
    But, it's not.
    This is the point.
    After I change the rule, for example 35% to 45%, the threshold value of GTS preference determination transaction '/SAPSLL/PRECA01' is changed. But, The replicated sales order's threshold value is not changed. And delivery, billing is the same with salesorder also.
    It's not changed whatever I do.
    So, I want to solve this problem. But until now, I didn't find the answer.
    Thank you for reading.
    Best regards,
    Jong Hwan

  • SAPCCMSR agent installation and integration with threshold values

    Hi!
    I have successfully configured CCMS monitoring for ABAP stack.
    Now I consider to monitor the J2EE stack.
    My questions:
    Is there some suitable documentation for:
    - set up of SAPCCMSR agent
    - integration of threshold values for the SAPCCMSR
    How much effort should be investigated for the these actions?
    Any helpful information will be appreciated
    regards
    Thom

    Check this [document|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/304fe0af-804a-2a10-49ab-bc48e0cd147d]
    Thanks
    Prince Jose

  • How to set threshold value for single tablespace in grid control 11g

    Hi,
    I want to set the threshold value for a single tablespace in grid control 11g,
    please provide me a navigation path.

    Sandy wrote:
    Can you please provide me the full navigation path?go to Targets --> Databases
    Select the Database you like to set this alert for
    Select link Metrics and Policy Settings

  • Managing threshold value of document library

    Hi,
    We are managing below stuff through .net application
    1)Uploading the document  to current Month folder in a document library , While uploading a document check for the current month folder , if it does not exists create a new folder with month and year format.
    2) After uploading a document, storing the file URL in SQL table i.e. through stored procedure.
    3) While retrieving we are using the DB link to display the pdf in application.
    Now have migrated this to SharePoint 2010
    We are using share point 2010 document library, with multiple folders. The library has now exceeded 5,000 items.
    As a result it is not allowing the users to update the documents to a document library, now we are receiving a list view threshold error.
    So now my question is if I increase the threshold value, will it be proper solution?
    After increasing the threshold value, will the performance be affected?
    Please share your ideas/thoughts on the same.
    Regards,
    Sudheer
    Thanks & Regards, Sudheer

    Hi,
    Instead of increasing the threshold limit,finally i felt folder structure would be good enough i.e
    1) Generally for the bulk documents if pretty good enough i.e.
    Uploading the documents in the folder week wise of the document library.
    So in case if there are 1000 documents in the folder, count would be 1 only.
    So this is a good practice for the large number of documents to upload in document library.
    2) Coming to file path,
    After uploading the document, file path can be saved under column of type hyperlink in the list.
    Same folder structure can be followed to save file path in the list
    3) We can fetch the file path from the list to display the pdf.
    Please correct me if i am wrong.
    Regards,
    Naga Sudheer M
    Thanks & Regards, Sudheer

  • Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

    Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.

    : Configuration of FP-Modules. In the catalog is something written about sending data on data change. There is a checkbox in the FP-Explorer but I can�t find a configuration menu in FP-Explorer to set the threshold value at which the data will be send.The FP-1600 modules automatically send data on-change only. The change threshold is by default 0%. Any change, even a single least significant bit change, is sent back to the computer. If the FP-1600 firmware revision supports deadbanding (firmware revision 3.0.x and later, can be downloaded from ftp://ftp.ni.com/support/fieldpoint/Update/FPEthernet0320.zip ). Then on each analog channel or count channel you can specify a percentage change for deadbanding in FieldPoint Explorer. This is done on a channel by channel basis, by right-clicking on the particular IO module and choosing Edit this Device, then choosing Channel Configuration. Each channel (if it supports deadbanding) will have a deadband entry box on the middle right side of the screen).
    The FP-1000/1001 seri
    al network modules do not support deadbanding. The checkbox in FieldPoint Explorer is simply for how FieldPoint Explorer displays the data to the user and does not effect client programs nor the behavior of the network module itself.
    Regards,
    Aaron

  • Adding threshold values in an existing query

    Hi All,
    I have to update an existing query.
    The original query gives me the value of Debtors to sales ratio for each division (DTR value).
    Now, I want that for each division, there be a threshold value which should be compared with the debtor's value and if found higher than the threshold, the result should be in red.
    The result being in red can be done at the front end, which in my case is Cognos.
    But to store different threshold values for diffrerent divisions and then compare them with the debtor's values of the query, do I need to have a separate cube wherein I should store the divisions and their threshold values?
    Or how can I go about it?
    Thanks and best regards,
    Sharmishtha

    Hi Nagesh,
    I do not have those values in the system but will be getting as external data only.
    Divisions and debtors are separate info objects.
    I have 12 debtors KFs (for 12 months) which get filled by an APD (data source is a query).
    So, my final query has divisions in the rows and 12 debtors in the colm.
    So, now i'll be given some threshold debtor value for each division which I need to bring in the query as a KF which can be compared in the query output.
    So, what you suggested will it work in this requirement?
    Also, can you elaborate on the method I need to follow?
    Thanks a lot,
    Sharmishtha

  • Consideration of factory calender in threshold values

    Hi,
    I need to consider the factory calender in the threshold values to check the due date of a task or a checklist item.
    For example:
    The task/or checklist item is due in 11 days (and the factory calender should be condsidered)
    Does anybody know how to implement these checks in the threshold values of cprojects?
    Thanks for your help!
    Isabella

    Dear Friend,
    Ideally you should not change anything on Production server directly.
    The normal & universally acceptable way is to transport the changes from Development or Quality to Production.
    Still if you want to make changes on Production Server Directly (which even i dont recomend) you need to make Production Server in change mode thru T-Codes SCC4 & SE03 & make necessary changes.
    Let me know if you need to know how to use T-Codes SCC4 & SE03.
    Thanks,
    Jignesh Mehta

  • Threshold value for price changes

    hello,
    We are trying to change the price for material and getting error Threshold value for price changes was exceeded
    msg no is CKPRCH 032
    Being Sd guy I'm not able to understand where we need to check and what changes to be done
    Please guide
    Regards
    Vishal Jajoo

    Dear friend
    For that u check the following path
    spro>> material management>> logistics invoice verification>>invoice block>>> stochastic block
    please check here for your plant your activated, if you activated then this error will appear
    regards
    Pramod

  • Solman Setup system Monitoring alert threshold value for Filesystem issue

    Hi,
    Our solman system is SAP EHP 1 for SAP Solution Manager 7.0 sp level 0024.
    We have setup the alerts System Monitoring alerts from DSWP in solman system for our target production system .
    But while assigning individual threshold values of filesystem freespace in MB for windows operating system disks C:,D:..all the values are getting changed after saving  to same value.(i.e if I update C:\ disk value and click on save rest of disks are also getting updated to this value).
    The same works fine for filessytems if target system OS is unix.
    I have tried the examples suggested in note:522453 but it nothing changed.Please suggest.

    Hi Sonal
    when you want to save the thresholds for only the one MTE you set
    you need to click on
    EDIT
    -> PROPERTIES
       -> USE FOR INDIVIDUAL MTE
    Kind Regards
    Marius

  • Threshold value for creating invoice?

    Hi
    Does anyone know a way to set a threshold value that has to be meet before an invoice is created in the billing transactions.
    I would like to set a threshold at about EUR 10 and as long as the customeru2019s total billable amount does not reach the threshold the open sales orders should remain open. This way we can eliminate invoices with small (or even zero) amounts that cost us more to produce than they bring in.
    Iu2019ve searched the SAP Notes and Forums but no one seems to have this issue before.
    Best regards
    Patrik

    Hi,
    What you can do is you can have a user exit at invoice saving level, so that if the invoice value is less than the desired value system will not save the invoice.
    Hope this will solve the problem unless someone comes up with something really innovative.
    Regards,
    Shantanu

  • Threshold value problem.

    Hi, experts.
    Now, I'm testing the preference calculateion.
    After I save sales order document, the sales order I saved is replicated to the GTS server.
    And, the threshold value is calculated by the system.
    In my understanding, the threshold value should be come from the rule that is assigned to the relevant product.
    When I excuted the preference calculation in GTS system, the threshold value is calculated correctly.
    But, after the GTS system get the sales order document from the ERP system the value is different from the value of the preference calculation excuted in GTS system.
    And even I changed the rule's condition(%), the threshold value of the sales document in GTS system is not changed.
    But, the threshold value of GTS's preference calculation transaction is changed whenever I changes the rule.
    I want to know how to solve this issue.
    The threshold values shouldn't be different from each other.
    Thank you for reading.
    Best regards,
    Jong Hwan.
    Edited by: Jong-Hwan Park on May 26, 2011 5:11 AM

    Dear. Marc P. Gilomen.
    I totally understand what you are written above.
    The threshold value shouldn't be changed until I change the rule related to the product.
    However, after I changed the rule, I have expected the threshold value should be changed according to the rule.
    But, it's not.
    This is the point.
    After I change the rule, for example 35% to 45%, the threshold value of GTS preference determination transaction '/SAPSLL/PRECA01' is changed. But, The replicated sales order's threshold value is not changed. And delivery, billing is the same with salesorder also.
    It's not changed whatever I do.
    So, I want to solve this problem. But until now, I didn't find the answer.
    Thank you for reading.
    Best regards,
    Jong Hwan

  • Tables for threshold value in GTS 11

    Good morning,
    to get away from our old ERP preference calculation we bought a license for GTS. At the moment we are discussing implementing version 10.1 or even 11.
    I am worrying as I am not sure, how to put data out of GTS to BI (BW) with version 11. We need the price and the threshold value (former table MMPREF_PRO_....) and those for the vendor declaration from supplier and the compression. (LFEI/MAPE).
    Does anybody has experience with getting this into BI? And the "new" tablenames in GTS?
    Hope, my questions are not too dumb, but we are just starting.
    Thanks for any help and have a nice day.
    Rgds Alex Linck
    Kostal Germany

    Hi ,
    Customize as per the path given below for the GTS to BI(BW) data replication.
    IMG : Integration with Other mySAP.com Components >> Data Transfer to the SAP Business Information Warehouse >> General Settings >> Maintain Control Parameters for Data Transfer. 
    GTS > General Setting > Document Structure > Define Document Types Turn on > Transfer to SAP Netweaver BI Active flag .
    GTS > General Setting > Document Structure > Define Item Categories > Transfer to SAP Netweaver BI Active flag .
    GTS > General Setting > Organizational Structure > Control at Foreign Trade Organization [FTO] for SAP NW BI > In the BI Active column, this flag is turned on for active FTOs.
    Ashish

  • System status requirement in Threshold value formula

    Hi Pals,
    Kindly let me know how to use system status in the threshold values creation. just i will let u know what is my requirement
    System status = Created & (Planned date is less than 14 calender days).
    The problem is, i can't able to use this system status (Created) in threshold values formula

    Hi
    Check this out !!!
    Assuming that SYSTEM_STATUS field is availbale in the threshold Change Formula display.
    SYSTEM_STATUS = 'Created' AND SCHEDULED_START < 14
    Regards
    Senthil
    Award points if useful.

  • Design needed to configure certain threshold values by user

    Hi All
    what is the best design in SSIS , where USER wants to configure threshold value at any time . we need solution without any UI development ? Is it possible by only SSIS ? 
    Surendra Thota

    Hi ,
      What do you mean by threshold values here ? If they are where clause filters in query to be applied ,you can consider using Package configurations. With this you can configure the values externally to package in a file, table or environment and the
    package will pickup at run time.
    For more details on package configurations refer below link
    http://msdn.microsoft.com/en-IN/library/ms141682.aspx
    Best Regards Sorna

Maybe you are looking for