Ccn only print once

I have an HP Color Laser Jet 8550. On my windows 7 and vista computers it will only print one copy at a time. can someone help?

Hello,
Thanks for the post. Actually, we could have several issues here, let's try and narrow it down. Do you lose connections between your iPad and Router? How about the printer? Does it keep it's connection? I've pasted in a couple of links to some reference documents that may assist with your issue...... Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02721964&tmp_task=solveCategory&cc=us&dlc=en&la...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02943849&tmp_task=solveCategory&cc=us&dlc=en&la...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

Similar Messages

Why does my printer connected through time capsule only print once after powering on then never again?

Hey,
I have a TimeCapsule which is logging in to my wireless network (i.e. it's not extending it, neither is it serving its own network). I have a Brother HL-2030 connected to it (via USB). I have two issues:
* the printer will only print directly after plugging in the USB cable to the TC, but only once. Subsequent attempts to print would not succeed. Disconnecting and reconnecting the USB cable will help, again, only once. The printer works flawlessly when directly connected to my MBP.
* the TimeCapsule is not found by AirPort utility, and neither am I able to apply a software update to it. Configuring it to extend my WLAN does not work reliably.
Does anyone have an idea what might be wrong here?
Regards,
Matthias

Thanks for the hint. I had thought about that, too. It was the easiest to configure the network this way as the modem is provider pre-configured. But I need to see if I can get to bridged mode. There's an additional problem with the location of the device in the building...
The printer had worked through the TC when it was the router (with my previous provider) and served the WLAN. Thus I don't see where the difference should be, particularly as I believe the printer is served via IP and thus it should IMHO not matter if the TC serves the WLAN + device or only the device.

Why will my ipad only print once to eprint photosmart Plus b210a

When i go through the trouble process of turning off wireless router, printer , and ipad then reboot all three. One print will be printed then no more.

Hello,
Thanks for the post. Actually, we could have several issues here, let's try and narrow it down. Do you lose connections between your iPad and Router? How about the printer? Does it keep it's connection? I've pasted in a couple of links to some reference documents that may assist with your issue...... Good Luck!
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02721964&tmp_task=solveCategory&cc=us&dlc=en&la...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02943849&tmp_task=solveCategory&cc=us&dlc=en&la...
I worked for HP but my posts and replies are my own....Thank you!
*Say thanks by clicking the *Kudos!* which is on the left*
*Make it easier for other people to find solutions, by marking my answer with (Accept as Solution) if it solves your issue.*

My document will only print using wireless once I log off windows.

I recently purchased the HP officejet wireless 4500 printer. I am able to send documents to print, but then get an error message. They will only print once I log off windows. PLEASE HELP!

Terry101
Welcome to the HP Community Forum.
To a large extent, the difficultly can be related to the type of document you are trying to print -- and the application you are using to print that document.
PDF documents can be tricky -- sometimes, especially if you are trying to print these from the Internet, PDF files can be stupid-hard to print because the format is messed up.
You can take a look at the following - no garantees -- it might help you find something that will help nail down what is going wrong or maybe help you figure out a way to get what you need. For example, if all else fails, you can perhaps take a Snip of the document on the screen, save the Image, and print that. It is a sorry excuse for a workaround - but at least you end up with something on paper.
Manage Print Output with Print Preview
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

I have a Photosmart 6510e that will only print after I shut printer off and then restart..

After setting up my 6510e photosmart all computers are able to print ---laptop, netbook and my iPhone can eprint. However, my desktop PC will only print once the printer sleeps (white light is dim) after I completely shut off the printer and then restart it. I have updated drivers and software. The message comes up "Unable to Communicate with Printer."

I have the same problem - I bought the 6510 printer yesterday and it seemed to connect wirelessly to my PC and shows as the default printer ok but when I try to print I get the message 'unable to communicate wirh printer'. I troubleshoot and am advised to switch on printer (it is already on) but when I switch it off and then on again the printing starts Ok. Very annoying and not what I had hoped for.....

Adobe Acrobat and InDesign documents print once only

Hi,
Printing a 100 page 25 sheet imposed 8.5 x 14 Adobe Acrobat document is limited to only one copy. At the end of the first copy printing; printer stops and requests letter-size paper, for drawer one,
printer default is set for 8.5 x 14 and first print ran from drawer 2.
Older CS 2 imposed files, printed from IDCS2 still print multiple copies on HP 4200 duplex. The new Adobe work flow for page imposition yields a pdf file to be printed from Adobe Acrobat.
OS is 10.5.8 iMac duo core intel.
Work flow is Adobe InDesign CS5 book > flight test clear > .pdf > open with Acrobat 9.3.2 > impose with Quite Imposing > save imposed pdf > prints only one at a time
then printer stops and asks for different paper size in different drawer.
Specifically : Prints one copy means 25 sheets duplex is completed perfectly, starting the next set of 25 sheets (one document copy) is when the printer stops and asks for different paper from different drawer.
note : Evidence points to the printing control panel of CS 5.
Older imposed Adobe InDesign CS2 document opened by InDesign CS5 also will only print one document copy of 25 sheets±. Attempting to over-ride the Adobe InDesign CS5 panel for printing by selecting four copies there does not help. In other words, printing an old InDesign file from InDesign CS5 yields the same problem as printing a new InDesign CS5 imposed, saved as pdf and printed from Adobe Acrobat 9.3
Adobe forums report similar unsolved printing problems with InDesign CS4. I'm going to post this in Snow Lepord as well since my laptop has 10.6.
Suggestions ?
Garrett

Hi kostby,
I'm sure you completely answered my question, I only checked helpful because my own thick skull is blocking a full appreciation of your brilliant insight.
Sadly, I'm away from my printer for another couple of weeks, even so, this shouldn't stop me from understanding what you are saying a little better.
I downloaded and went through the file from HP and it looks to me like the obvious default HP position is one copy. Am I clear in assuming from this, and your explanation, that the CS5 software engineer has overridden my command to print four ? I am making this assumption because the default is for long edge binding and I select short-edge legal-size duplex with legal size being my default size for the printer. Thus, the change in paper size and drawer location remains a mystery.
I often print four to five copies because that is a convenient stack for my aging cutter, any number greater than one is nice because I can avoid being in the room with the printer and breathing ink dust.
I am not sure how to send the print job to a file so I can open it with BBEdit and inspect the specific commands, this is very interesting to me. Though I'm at this point without the full skill set to master using this great knowledge. Also, over the years, I've found that I don't fully retain lessons once learned but rarely used, but that's a different and perhaps personal problem.
Thank you very much,
Garrett

Creatig a .pdf that can only be printed once

Hello, I am looking to create a coupon for my website's email club, but I'd like to make it so the coupon can only be printed once. How do I go about doing that? I know how to add a password and make it unprintable, but not print once. Thanks for any help.

Probably not possible at all, but if it is, it's with a DRM product which costs thousands of dollars.

Adobe imposed document prints once only

Hi,
Printing a 100 page 25 sheet imposed 8.5 x 14 Adobe Acrobat document is limited to only one copy. At the end of the first copy printing; printer stops and requests letter-size paper, for drawer one,
printer default is set for 8.5 x 14 and first print ran from drawer 2.
Older CS 2 imposed files, printed from IDCS2 still print multiple copies on HP 4200 duplex. The new Adobe work flow for page imposition yields a pdf file to be printed from Adobe Acrobat.
OS is 10.5.8 iMac duo core intel.
Work flow is Adobe InDesign CS5 book > flight test clear > .pdf > open with Acrobat 9.3.2 > impose with Quite Imposing > save imposed pdf > prints only one at a time
then printer stops and asks for different paper size in different drawer.
Specifically : Prints one copy means 25 sheets duplex is completed perfectly, starting the next set of 25 sheets (one document copy) is when the printer stops and asks for different paper from different drawer.
note : Evidence points to the printing control panel of CS 5.
Older imposed Adobe InDesign CS2 document opened by InDesign CS5 also will only print one document copy of 25 sheets±. Attempting to over-ride the Adobe InDesign CS5 panel for printing by selecting four copies there does not help. In other words, printing an old InDesign file from InDesign CS5 yields the same problem as printing a new InDesign CS5 imposed, saved as pdf and printed from Adobe Acrobat 9.3
Adobe forums report similar unsolved printing problems with InDesign CS4.
Suggestions ?
Garrett

I'm running 10.6.4 on my laptop and updated all my Adobe software so I could put 10.6 on my iMac, too. The reason I'm posting here is that there does not seem to be an answer for this on the Adobe forums and I hope an experienced Mac user will have encountered it and suggest a solution. The Adobe forum on this subject for CS4 is over 7,000 views and 50 responses with the problem still not solved, now I amexperiencing the same or similar problem on CS5 and hope someone here has a work around.

Can only print one item at a time

Hey everyone,
Bit of a Photoshop novice here, use it for DVD covers and labels. I have been using CS3 previously but upgraded to CS5.5 last year. The thing is on CS5.5 I can only print one page at a time even when I input say 20 copies to be printed, only one will print. That goes for the regular printer for printing covers and the disc printer.
I can open CS3 up and right away it will print however many I ask it to.
Is there something I am missing? Something so painfully obvious that it is staring me in the face but I am just not seeing it?
Thanks in advance!

It isn't a printer setting. I have 3 different printers connected to my system and all of them worked with CS3 fine. And when I delete the preferences folder for CS5.1 it works as it should but only once, then afterwards it only prints one copy, no matter how many I ask it to print!
So if it works when the preferences have been removed, then fails to work afterwards, how can that be a printer setting?
I have read elsewhere that others have had similar issues with CS5 and Windows 7.

How can I get my printer to print in color? I can only print black and white

HP Officejet 6500 E710n-z-------windowsxp My printer will not print anything in color. How can Iget my printer to print in color? I can only print in black and white. It is a new Printer and we just installed it 2 wks ago.

I am not sure I understand ''it still will not print. ''
If you cannot see any content on pages you printed or in print preview, the cause might be margins which are set too high.
#In order to check the margins, we need to go to ''File'' > ''Page Setup''.
#Once this is done, switch to the ''Margins & Header/Footer'' tab.
#Check what's set there under ''Margins''.
The following are the default values for ''Margins'':
'''Right''': 12.7
'''Top''': 12.7
'''Left''': 12.7
'''Bottom''': 12.7
Check these values accordingly and change them if necessary.

HP 8500 A Plus only prints half of first page from my mac

When I print wireless from my mac it only prints half of the first page (regardless of how many pages the document is) then stops. This only happes with my computer. If I make a copy or print from my phone everything works fine. I've had this printer for about 2 years and this is a new issue that didn't used to happen. I do not get any error messages when this happens.
Any ideas?

There is no full feature software and driver for your printer that is compatible with Yosemite @1Adam12 , so we know the issue is not the software. Let's try the following steps in order to resolve this;
Reset Printing System
Click the Apple icon (   ), and then click System Preferences.
In the Hardware section, click Print & Fax/Scan. The Print & Fax/Scan dialog box opens.
Right-click (or  Ctrl  +click) in the left panel, and then click Reset printing system…
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system. The Print & Fax dialog box shows no printer selected
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Repair Disk Permissions
On the Dock, click Applications, and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left (by default this is "Macintosh HD").
Click the Repair Disk Permissions button at the bottom of the window.
Once the repair is complete, restart the computer and download and install the HP Printer Drivers for OS X.
Now when you add the printer, you should have the HP driver to choose,
Select Add other Printer or Scanner
Select the printer you are adding and next to 'Use' you can the printer driver
Please let me know if you can print a complete job now.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Photoshop CS5 only prints in black and white

Photoshop CS 5.1 only prints in black and white. It is not a new printer (Kodak) and I have printed in color in photoshop in the past. All other applications will print in color. Have removed the settings folder, but that did not do anything.

This sounds like a conflict with your printer's driver and Ps. Have you looked at a newer one?
Have you checked the Color settings in your printer's driver? Many, like most of my Epsons, can be set to B/W only. Those settings are on a print-job basis, and once I exit from a program, they are not usually retained, and go to the default, however that has been set.
Please let us know model and then driver numbers, as there might be something there.
Good luck,
Hunt

HP Deskjet 3510 Series (3512) only printing in black and yellow.

Hello.
My HP Deskjet 3510 recently ran out of ink (or so I thought.) I purchased new 61xl color and black cartridges and replaced them. However, the printer is only printing in black or yellow. I am unable to get any red, blue, or grayscale.
I have cleaned the printer heads several times, and alligned the printer several times but this has not helped the problem.
I am looking for any suggestions on what I can do to get my printer working once again.
Thank you.
Sara C.

Hello @sarajo0531 , and welcome to the HP Forums, I hope you enjoy your experience!
I see you're running into print output issues. I would like to help!
I'd start by removing the ink cartridges, and performing a power reset on the printer. Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
I would then suggest following the steps laid out in this document:
Fixing Print Quality Problems for the HP Deskjet 3510 and Deskjet Ink Advantage 3510 e-All-in-One Pr...
Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Only prints part of photo

I am trying to print a 12x16 in photo from iPhoto using an Epson 1280 printer. Unfortunately, the printer only prints part (about 1/4 of the photo). It then ejects the photo paper as if it were finished with the print job. I downloaded the latest driver from the Epson website. I also tried deleting the .plist file in the Library folder (I ended up restoring it because the next time I launched iPhoto, almost all of my photos were missing). Finally, I also tried creating and printing from a new user account. The only thing that seemed to work was when I tried printing an 8x10 of the same photo (to save ink, I printed it in B/w rather than color, though I can't imagine that made a difference). Incidentally, I had the same problem once before and managed to solve it. Unfortunately, I can't remember how -- my best recollection is that it had something to do with drivers and/or Library files. Any help would be greatly appreciated.

Heather:
The problem is that the Epson 1280 does not support 12x16 borderless prints. From the Epson site:
"It produces captivating borderless 4" x 6", 5" x 7", 8" x 10", letter (8.5" x 11"), 11" x 14" and 13" x 19" color photos"
If you don't need borderless select the paper size that the printer supports that will hold that size print and select a custom sized print in the Print window. It should print in the center of the paper used.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Printing Issues: Keynote only prints first two pages of presentation

I am trying to pring an 11 page Keynote presentation on an HP 4600 color laser printer. It will only print the first 2 pages.
If I convert the presentation to PowerPoint, it prints all ages correctly. If I print a word or pages document, all pages print correctly.
What gives with keynote?
MacBook Pro, 2.1 GHz Mac OS X (10.4.9) 2 GB Ram

It is likely that there is something funky with one of the images on the page. The next step would be to delete the images one at a time to see which one it is. Once you have isolated it, you could try saving it in a different format (e.g., TIFF, or JPEG, or PNG), and see if that solves the problem.

Ccn only print once

Similar Messages

Maybe you are looking for