Cconsole in 3.2 x86

Hi everyone
I installed cluster 3.2 on Solaris10 x86 with all features, but I can not find any admin tool like ccluster.
Please help, in installed it 2/3 times.
Regards
Amit Bist

Sorry to inform you so late, I am using Solaris 10 x86 32 bit on VMWare and just rebooting any machine takes 1 hour. So please bear with me. I didnt read the manuals properly and first to learn clustering, I created Windows clusters in VMWare, but now I find that there are some changes in Solaris clustering method and Windows Clustering method.
Will read the documents first and will be back for any query,
But truly speaking, I have not found this much of help from anywhere, any group, any forum that I found in SDN.
Its really nice to gain knowledge from expert ppl like you.
Regards
Amit Bist

Similar Messages

Solaris Management Console 2.1 in Solaris 10 x86 nv-b40 and nv-b42.....

I have been Solaris 10 x86 on my Intel machines and never had any problem with SMC. However, things seems to have changed since
nv-b40 release. SMC out-of-the-box does not work even the first time. I get a message like Server is not running, Toolbox is not available. I tried to start the server manually using the command
/etc/init.d/init.wbem start
and I got the message
svccfg:Pattern 'application/swcwbem' doesn't match any instances or services.
I have reinstalled nv-b38 and SMC works fine. Does any one know what has changed between nv-b38 and nv-b40 releases which caused SMC not to work out-of-the-box? Also, if any one has encountered this problem and got a fix for it, could you please post it here? Thanks a bunch in advance.
-Victor bagga

did you enable tcp listening?
svccfg -s wbem setprop options/tcp_listen=true
svcadm refresh wbem
svcadm restart wbem

Running T1SAM simulator over x86 ?

Hi,
Is it possible to run T1 SAM simulator over x86 ?
Although the original requirements are SPARC and Solaris 9/10, I think ( and maybe also wrong...) that a proper Makefile for x86 should work...
Thanks in advance!

r0b0t wrote:
Hi,
I started with MIPS and I got used on running the code on QtSPIM (well PCspim) to be more precise as I used it on windows.
Now, while I want to learn x86 and especially x64 assembly I'm in no way on finding any simulator to run the code.
I know, I can run it directly on the machine, but I can't nicelly check the registers or break every operation as I could with spim and MIPS assembly.
I'm pretty sure there are folk already solved this problem so, could you share how?
thanks.
Great book if you're starting to learn x86.
http://www.amazon.com/Professional-Asse … y+language

Installation problem sun solaris 9 x86 on intel

I am trying to install sun solaris 9 x86 intel platform edition on my home pc hp e-vectra, configuration is PIII 800 Mhz, 10 GB HDD, 128 MB Ram, 17" color monitor, but it giving me following error :-
BooT Panic: trap type e, error 0 at 117499
Cr0: 800000011, cr1: 4, cr3: 17e000
Eax: 0, ebx: 7e2c, ecx: 0 edx: 16e350
Es: fffffffe, edi: 17dfe0, ebp: 7e40, esp: 7e20
Entering boot debugger:
Please help me, how can I install sun solaris 9 x86 on my HP E-Vectra PC.
Kalpesh Mehta

I had similar problems several months ago. I suspect this happens when host pc does not have floppy drive(or bios somehow misreports it) as it was in my case. Solaris 8 seems to work fine in the same environment, so I keep using it for now. Possible workaround might be to use DCA from Solaris 8: Installation of Sol9 started just fine after I entered Sol8 DCA and asked it to boot from Sol9 CD.
Hope this problem will be fixed in subsequent Sol9 releases.
Victor

Installation problem of Oracle 8.1.7 on solaris 10 x86

Hi,
I tried to install the Oracle 8.1.7 on solaris 10 x86 and I got an error message shows: "cannot write to /opt/oracle/product/8.1.7/jar/classes2.jar".checking the log it shows:
Exception: IOException2
and exception: copyGroupFromJar. I ignored the error but the installation failed.By the way, I was not asked to run root.sh during the installation. Can anyone kindly tell me how to make it?
yours
zeushd

Here are some additional statements for 10g on Solaris 10g x86:
1. Execute runInstaller with the -ignoreSysPrereqs option.
2. Select 'Do not create a starter database' when installing Oracle 10g.
3. During installation, the warning message 'SUNWsprox package not installed' can be ignored. Press Continue to resume the installation.
4. Download and install patch 4186426 from metalink.oracle.com after installing Oracle 10g software.
5. If you have an End User Solaris 10 distribution, install the SUNWuiu8 package prior to installing the 10g client.

Installer problem - Oracle 11g on Redhat ES 5.1 (x86)

Hi,
I'm trying to run the "runInstaller" script to install Oracle 11g onto my Redhat ES 5.1 (x86) machine and the following error is being reported:
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 1409 MB Passed
Checking swap space: must be greater than 150 MB. Actual 1407 MB Passed
Checking monitor: must be configured to display at least 256 colors. Actual 16777216 Passed
Preparing to launch Oracle Universal Installer from /tmp/OraInstall2008-01-10_04-46-50AM. Please wait ...Exception in thread "main" java.lang.NoClassDefFoundError: oracle/ewt/lwAWT/BufferedFrame
     at java.lang.ClassLoader.defineClass1(Native Method)
     at java.lang.ClassLoader.defineClass(ClassLoader.java:620)
     at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)
     at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)
     at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
     at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
I copied all the installation tree to /tmp/oracle and ran chmod -R 777 * to make sure I could see all the files.
I've been logging onto the server as the oracle user.
I've also got Java v1.5.0.6 installed
I've run out of ideas - anyone able to assist ?

I've sorted it. Was originally copy unzipped install files from DVD into /tmp but think there must have been some corruption. I now copied and unzipped the install file onto the RH machine and it's now working.

Oracle 10G installation problem, and errors on SOLARIS 10 x86

HI.
I installed the last version of oracle 10g on a x86 SOLARIS 10 system.
When the installer arrived at Configuration assistants, the window is stopping, and I can't see forward. But when I look at the installAction.log, the installation is checked as OK (?).
When I launch sqlplus, and startup inside, it is said the ora-00205 error (problem with control files), and in the end, I'm really suprised there's no the database I told the installer to create at the beginning. But should I be surprised? As I didn't see really the end of the installation, and the installer didn't propose me the PATH where to install the DB, well, I guess there's something wrong.
Could anybody tell me how to solve these problems, please?
Thank you :)

Two options:
1. Create database using DBCA - execute $ORACLE_HOME/bin/dbca
2. Create database manually (without DBCA)

Problem with solaris 10 08/11 installation on x86 workstation (DELL T5500)

Trying to install solaris 10 08/11 installation on x86 workstation (DELL T5500). Following error message was received after selecting the Oracle Solaris interactive Text (Desktop Session) installation method-
SunOS Release 5.10 Version Generic_147441-01 64-bit
Copyright (c) 1983, 2011, Oracle and/or its affiliates. All rights reserved.
Configuring devices.
SUNW-MSG-ID: SUNOS-8000-0G, TYPE: Error, VER: 1, SEVERITY: Major
EVENT-TIME: 0x5075a820.0x8f97a90 (0x1693e68979)
PLATFORM: i86pc, CSN: -, HOSTNAME:
SOURCE: SunOS, REV: 5.10 Generic_147441-01
DESC: Errors have been detected that require a reboot to ensure system
integrity. See http://www.sun.com/msg/SUNOS-8000-0G for more information.
AUTO-RESPONSE: Solaris will attempt to save and diagnose the error telemetry
IMPACT: The system will sync files, save a crash dump if needed, and reboot
REC-ACTION: Save the error summary below in case telemetry cannot be saved
panic[cpu0]/thread=fffffe80000b3c60: pcieb-7: PCI(-X) Express Fatal Error. (0x4)
fffffe80000b3bf0 pcieb:pcieb_intr_handler+1ea ()
fffffe80000b3c40 unix:av_dispatch_autovect+78 ()
fffffe80000b3c50 unix:intr_thread+5f ()
syncing file systems... done
ereport.io.pci.fabric ena=1693e6221600001 detector=[ version=0 scheme="dev"
device-path="/pci@19,0/pci8086,3410@9" ] bdf=2048 device_id=3410 vendor_id=
8086 rev_id=22 dev_type=40 pcie_off=90 pcix_off=0 aer_off=100 ecc_ver=0
pci_status=10 pci_command=47 pci_bdg_sec_status=0 pci_bdg_ctrl=3 pcie_status=6
pcie_command=7 pcie_dev_cap=8021 pcie_adv_ctl=5 pcie_ue_status=4020
pcie_ue_mask=100000 pcie_ue_sev=62030 pcie_ue_hdr0=0 pcie_ue_hdr1=0
pcie_ue_hdr2=0 pcie_ue_hdr3=0 pcie_ce_status=0 pcie_ce_mask=0
pcie_ue_tgt_trans=0 pcie_ue_tgt_addr=0 pcie_ue_tgt_bdf=ffff pcie_rp_status=0
pcie_rp_control=0 pcie_adv_rp_status=7c pcie_adv_rp_command=7
pcie_adv_rp_ce_src_id=2048 pcie_adv_rp_ue_src_id=2048 remainder=0 severity=44
skipping system dump - no dump device configured
rebooting...
Any ideas?

Sometimes, it's just easier and faster
to just start all over and re-install,
particularly when you have only a fresh install on your system.
This time, do not choose to include all the optional "documentation"
(that's what is held on CD5).
I have never found a reason to ever read that documentation so I stopped installing it.
... or you could download and burn a copy of CD5 and use it when prompted.

Solaris 10 x86 installation problem on ProLiant DL380..

I'm trying to put Sol10 b72 on a dual-proc ProLiant DL380 here, with the Compaq 5i array controller.
I have the Solaris 9 drivers from HP; they seem to work just fine for the installation.
The problem comes at the end of the first disc.
Sidebar:
For one thing (and this drove me NUTS until I got lucky and caught it during a reboot), at the end of the install, on the console, it asks for the driver diskettes..again.
The problem is, it doesn't say this ANYWHERE else, only on the console..and if you're doing the installation in the X desktop, you just never know it. It doesn't write this to the xconsole window. I tried installing a good 5-6 times before, instead of hitting the power button out of frustration after the install just hung again, I actually opened up a terminal and typed 'reboot'..and caught the "Please insert the diskette and press Enter" as it killed X. If anyone at Sun is reading this..you may want to fix this, before someone gets very frustrated that their installations never seem to finish...
End Sidebar.
So...I'm doing the console text install (otherwise you'll never see the message to insert the driver diskettes for the Broadcom NIC and the Compaq array), and sure enough, at the end of the install, it asks for the diskette. I pop in the diskette it's specifically asking for (the Compaq array diskette in this instance), and hit enter. It chugs for a second and then says it can't find the driver on the diskette.
Which is incorrect, because if it haden't found it on the diskette during the device configuration assistant phase during bootup, it wouldn't have even been able to install Solaris.
So..what's up? Anyone have any ideas why Solaris finds it one time but can't find it later? Is this a bug or problem in the installation script?
Thanks,
Greg

problem 1 is that it's looking for ../../s0.. Which I
managed to
fake out by creating the dir in the same mount
point.
Problem 2 is that it can't find .tmp_proto, which I
must
concur with. I can't find that on any of the b72 cd
images.
So, the setup_install_server fails.This seems to be the problem when you try to setup an install
server on a Solaris SPARC system for Solaris x86 clients, using
the Solaris 9 or Solaris 10/Express CD media.
There's a Solaris x86 UFS filesystem on slice 0 on the CD media,
and it's supposed to be mounted on the "s0" mount point,
otherwise setup_install_server won't work. On a Solaris x86 box,
vold mounts it automatically for you: /cdrom/cdrom0/s2 is the
mount point for the platform independant ISO9660 part of the CD
media, /cdrom/cdrom0/s0 is the UFS root filesystem.
Problem is that Solaris SPARC:
- does not understand Solaris x86 disk labels
- does not allow mounting x86 UFS filesystems
(and vice versa).
AFAIK, Solaris 9 DVD media does not have this problem. I
guess the same will be true when Solaris 10 DVD media is
available in a few months. On the DVD media there's enough
free space to include an extra copy of the files in the ISO9660
filesystem.

Solaris 9 x86 installation problem on dell 600sc

I am trying to install Solaris x86 on a Dell 600sc machine. But the installation always abort. It can boot from CDROM and perform hardware scaning. It then fails and reboots itself when loading kernel from CDROM. The error message is:
Warning /pci@0,0/pci-ide@f,1/ide@0 (ata0)
timeout: abort request, target=0 lun=0
Any hint would be highly appreciated.
Jon

I am getting same error with Solaris 10.
Does any one installaed Solaris on this machine.
I am using latest BIOS from DELL.

Searching Oracle 8.1.7 Client for Solaris on x86/Intel

Hi all,
I need an Oracle client 8.1.7 running on a Sun Solaris on a Intel/x86 chipset (in VMware)
Exists there any location to download this client?
thanx for help!
Andreas
Salzburg, Austria

Are there plans to have a Solaris x86 version downloadable on OTN? I am making the OS decision for a new development server. I would like it to be Solaris x86 but if Oracle is a no-go on Solaris x86, I will have to use Linux or... hate to say it... M$

Install demo of CS4 Web Premium-Photoshop Installs 64 bit and x86 versions but 64 bit does not work

Just installed the CS4 Web Premium demo onto a brand new 64 bit i7 processor with Windows Seven Home Premium machine with 9gb memory. The install seems to be fine except it installed a 64 bit version as well as x86 version into different folders. The x86 version works fine but the 64 bit version does not.
Every time I try to open a file using "Open With' I get the following message "The application was unable to start correctly (0xc000007b). Click OK to close the application."
First of all why does it install both versions and why does it try to open everything in the 64bit version even after specifically telling it to open in the x86 version (even after setting the default file association to the x86 version.
I would of course like to use the 64 bit veriosn but if it not going to work. I'll use the 32 bit version. I just wantto be able to right click my mouse and be able to "Open With". I can open Photoshop 32 bit and open the file that way but it is a pain to do that way.
Any help would be appreciated

Both are installed to allow you to use 32 bit plugins. As for the problem, you'll get far more attention in the Photoshop forum.
Bob

Mounting a Solaris x86 CD/DVD from a remote Windows CD/DVD-ROM drive

Greetings, all.
Is it possible to mount a remote Windows CD/DVD-ROM drive? I have the Solaris 10x86 Companion Software DVD sitting in a CD/DVD-ROM drive that's installed on a Windows server on my network. It is shared-out (F:) and the two servers can ping each other. I've also confirmed the NFS services/daemons are running on the Solaris x86 machine. I've tried the following variations but, all have failed to produce successful results:
# mount -F nfs x.x.x.x:/f /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f
# mount -F hsfs x.x.x.x:/F /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F
[FYI: S10_106_SOFTWARE is the DVD's label as reported by Windows Explorer.]
# mount -F hsfs x.x.x.x:/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/s10_106_software
# mount -F nfs x.x.x.x:/S10_106_SOFTWARE /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F nfs x.x.x.x:/s10_106_software /mnt
nfs mount: x.x.x.x: : RPC: Program not registered
nfs mount: retrying: /mnt
# mount -F hsfs x.x.x.x:/f/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/s10_106_software
# mount -F hsfs x.x.x.x:/F/s10_106_software /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/s10_106_software
# mount -F hsfs x.x.x.x:/f/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/f/S10_106_SOFTWARE
# mount -F hsfs x.x.x.x:/F/S10_106_SOFTWARE /mnt
mount: No such device
mount: cannot mount x.x.x.x:/F/S10_106_SOFTWARE
I've also tried mounting it at bootup by adding the appropriate entry in the /etc/vfstab file but, this does not work as well. I've tried Google'ing for an answer to my issue but, I haven't been able to find anything that applies directly to what I'm reporting. It's usually chatter about mounting from one UNIX server to another. Any advice from the community would be greatly appreciated.

After three weeks, you deserve a reply. Windoze does
not natively support NFS.Also deserves a decent answer...
There are two ways to do this:
Install Microsoft's free "Windows Services for UNIX," which includes a Windows NFS server; or
Install the 'sharity' package (google for it); it provides Solaris systems the ability to mount Windows shares

When I try to update iTunes 10.3, Insufficient Privileges error. C:\programData\{429CAD59-35B1-4DBC-BB6D-1DB24-6563521}\x86\DIFxAPI.dll

When I try to update iTunes 10.3, the installer finishes downloading but then this message appears "errors occured while installing updates. If the problem persist, select Tools, "just download" and instal them manually"
so I go and do that, select Tools and then just download. Then when it finishes loading it goes back to the Apple Software Updater and pups up another window at this location C:\Users\brandsmart\AppData\Local\Apple\Apple Software Update
there I find AppleApplicationSupport, AppleMobileDeviceSupport, Bonjour, iTunes, QuickTime and SetupAdmin. So when I select iTunes it starts downloading it again, but this time as if it was the first time (not an update)..
It takes me to "Welcome to the iTunes Installer" I click next, I accept the terms and conditions and click next, takes me to the "Installations Options" I check and click "Install" then click "accept" then "accept" again, so it starts to download but then when it finishes downloading this meassage appears "the installer has insuffisient privileges to modify this file: C:\ProgramData\{429CAD59=35B1-4DBC-BB6D-1DB24-6563521}\x86\DIFxAPI.dll.
and there are three options- "Abort, Retry and Ignore." If I "ignore", nothing happens, just closes and pups right back up. If I click "retry," just the same, closes and opens right back up with the same options. If I "abort" it asks me if I'm sure to cancel, so I click "yes" so it says "rolling back action." when it's done it just closes everything and if I try to update, it's the same story all over again.
If I go to the "Advanced Security Settings for iTunes" I can see my name and two more options, all of them say "allow and full control" so I'm guessing that's not the problem but I don't really know.
Please somebody help me!! I don't know what to do.

the installer has insuffisient privileges to modify this file: C:\ProgramData\{429CAD59=35B1-4DBC-BB6D-1DB24-6563521}\x86\DIFxAPI.dll.
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Vista instructions in the following document: Check your hard disk for errors
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors. You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

Problem with WLST in weblogic application server 10.3 on solaris 10 x86

Hi Friends, I installed Sun Solaris 10 on my desktop x86. I am able to install oracle weblogic application server 10.3.
I created one domain and I am trying to start AdminServer on that using WLST command.
Before that , I started the admin server from command as normal start ( nohup ./startWebLogic.sh &) and the server started perfectly alright. After that I was trying to open admin console in firefox browser. It was opening perfectly alright.
Now I stopped the server and checked no processes which are related to weblogic were running , and then initialized the WLST environment using the script "wlst.sh" , which is at (in my system) /usr/bea/wlserver_10.3/common/bin/wlst.sh. Now the environment had been set and the WLST offline prompt came up.
Now I used the below WLST scirpt command
startServer('AdminServer','mydomain','t3://localhost:7001','weblogic','weblogic1');
and the server started perfectly alright, now what I did was , I started admin console at FireFox browser , it prompted me to enter user name and password , I gave them , and once the login is done, then in my shell window , I am seeing error as
**wls:/offline> WLST-WLS-1263965848154: <Jan 19, 2010 11:39:24 PM CST> <Error> <HTTP> <BEA-101017> <[ServletContext@28481438[app:consoleapp module:console path:/console spec-version:2.5]] Root cause of ServletException.**
**WLST-WLS-1263965848154: java.lang.OutOfMemoryError: PermGen space**
**WLST-WLS-1263965848154: at java.lang.ClassLoader.defineClass1(Native Method)**
**WLST-WLS-1263965848154: at java.lang.ClassLoader.defineClass(ClassLoader.java:616)**
**WLST-WLS-1263965848154: at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)**
**WLST-WLS-1263965848154: at weblogic.utils.classloaders.GenericClassLoader.defineClass(GenericClassLoader.java:344)**
**WLST-WLS-1263965848154: at weblogic.utils.classloaders.GenericClassLoader.findLocalClass(GenericClassLoader.java:301)**
**WLST-WLS-1263965848154: Truncated. see log file for complete stacktrace**
**WLST-WLS-1263965848154: >**
**WLST-WLS-1263965848154: <Jan 19, 2010 11:39:24 PM CST> <Error> <JMX> <BEA-149500> <An exception occurred while registering the MBean com.bea:Name=mydomain,Type=SNMPAgentRuntime.**
**WLST-WLS-1263965848154: java.lang.OutOfMemoryError: PermGen space**
**WLST-WLS-1263965848154: at java.lang.ClassLoader.defineClass1(Native Method)**
**WLST-WLS-1263965848154: at java.lang.ClassLoader.defineClass(ClassLoader.java:616)**
**WLST-WLS-1263965848154: at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:124)**
**WLST-WLS-1263965848154: at java.net.URLClassLoader.defineClass(URLClassLoader.java:260)**
**WLST-WLS-1263965848154: at java.net.URLClassLoader.access$000(URLClassLoader.java:56)**
**WLST-WLS-1263965848154: Truncated. see log file for complete stacktrace**
**WLST-WLS-1263965848154: >**
**WLST-WLS-1263965848154: Exception in thread "[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'" java.lang.OutOfMemoryError: PermGen space**
So I thought I have less memory consuming for this weblogic admin server and opened up ,
_/usr/bea/wlserver_10.3/common/bin/commEnv.sh_
and changed the memory arguments as
Sun)
JAVA_VM=-server
MEM_ARGS="-Xms1024m -Xmx1024m -XX:MaxPermSize=1024m" <---- previously these were 32m and 200m and MaxPermSize
and also in /usr/bea/wlserver10.3/common/bin/bin/setDomainEnv.sh_
and in this file also I changed the memory arguments as
*if [ "${JAVA_VENDOR}" = "Sun" ] ; then*
*WLS_MEM_ARGS_64BIT="-Xms256m -Xmx512m"*
*export WLS_MEM_ARGS_64BIT*
*WLS_MEM_ARGS_32BIT="-Xms1024m -Xmx1024m"*
*export WLS_MEM_ARGS_32BIT*
and restarted the server using the WLST command and again tried to open the admin console on a browser, same error is showing.
(1) Environment : Sun Solaris x86
(2) JDK : sun jdk 1.6._17
Please help me what I am doing wrong here and please let me know the solution.
I was trying to install jrockit 1.6 on this since my OS is sun solaris X86 , there is no compatible jrockit version is not there.
Thanks a lot
Peter

Hi Peter,
As you have mentioned in your Post that
MEM_ARGS="-Xms1024m -Xmx1024m -XX:MaxPermSize=1024m" <---- previously these were 32m and 200m and MaxPermSize
The Setting you have provided is wrong ...that is the reason you are gettingjava.lang.OutOfMemoryError: PermGen space. There is a RRation between PermSize and the maximum Heap Size...
Just a Bit Explaination:
Formula:
(OS Level)Process Size = Java Heap (+) Native Space (+) (2-3% OS related Memory)
PermSize : It's a Netive Memory Area Outside of the Heap, Where ClassLoading kind of things happens. In an operating System like Windows Default Process Size is 2GB (2048MB) default (It doesnt matter How much RAM do u have 2GB or 4GB or more)...until we dont change it by setting OS level parameter to increase the process size..Usually in OS like Solaris/Linux we get 4GB process size as well.
Now Lets take the default Process Size=2GB (Windows), Now As you have set the -Xmx512M, we can assume that rest of the memory 1536 Mb is available for Native codes.
(ProcessSize - HeapSize) = Native (+) (2-3% OS related Memory)
2048 MB - 512 MB = 1536 MB
THUMB RULES:
<h3><font color=red>
MaxPermSize = (MaxHeapSize/3) ----Very Special Cases
MaxPermSize = (MaxHeapSize/4) ----Recommended
</font></h3>
In your Case -Xmx (Max Heap Size) and -XX:MaxPermSize both were same ....That is the reason you are getting unexpected results. These should be in proper ration.
What should be the exact setting of these parameters depends on the Environment /Applications etc...
But Just try -Xmx1024m -Xms1024m -XX:MaxPermSize256m
Another recommendation for fine tuning always keep (Xmx MaxHeapSize & Xms InitialHeapSize same).
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)
Edited by: Jay SenSharma on Jan 20, 2010 5:33 PM

Cconsole in 3.2 x86

Similar Messages

Maybe you are looking for