CCP Express wont install on 2821 router

Hello everyone,
I am trying to install Cisco Configuration Professional 2.4 Express on my 2821 router. During the installation process, I get notified there is 0 bytes available of routers flash memory. When I run a "show flash:" command, I receive the following error:
%Error show flash: (No device available)
The output of the "show version" (edited) command is:
Cisco IOS Software, 2800 Software (C2800NM-ADVENTERPRISEK9-M), Version 12.4, RELEASE SOFTWARE (fc1)
ROM: System Bootstrap, Version 12.4(1r) [hqluong 1r], RELEASE SOFTWARE (fc1
Router uptime is 2 weeks, 5 days, 4 hours, 54 minutes
System returned to ROM by power-on
System image file is "flash:c2800nm-adventerprisek9-mz.124-12c.bin"
Cisco 2821 (revision 53.51) with 512000K/12288K bytes of memory.
Processor board ID FTX1006C4SB
2 Gigabit Ethernet interfaces
1 Serial interface
2 Virtual Private Network (VPN) Modules
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
500976K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102
After some reading on Cisco site, I saw that 2800 routers do not support internal flash, but only CF cards. What I would like to know is how can I install CCP Express on CF card?
Thank you in advance.

bump?

Similar Messages

  • Final Cut express wont instal on mac book pro

    I bought a Mac book pro last night and today I attempted loading the FCE 2.0 and then using the upgrade version FCE HD4 and It told me my HD 4 version had an invalid serial number (it works fine on my imac 24 in) And so I figured I would just look at the FCE 2.0 and open it up. It wont open and it gives me a error message RGP ERROR. You do not have a graphics card or sufficient software to run this program....
    Have no clue Tried rebooting.. I will call apple in the AM. I told the guys at the store that I was using FCE 2.0 and no one said that It wouldn't work...
    Any similar issues with anyone else?
    Thanks
    TIM

    There is no need to install FCE2.
    Just install the FCE4 upgrade as it is actually a Full Retail version with one tiny difference ....... you will have to input both the old and the new serial numbers.
    Make sure you get the numbers exactly right or they won't work.
    Before reinstalling you should remove every trace of the existing installations by deleting the files listed here:-
    http://docs.info.apple.com/article.html?artnum=93688
    http://docs.info.apple.com/article.html?artnum=301182
    You can ignore the LiveType and Soundtrack items.

  • Airport express wont install

    i just bought a new macbook with the new santa rosa motherboard and chipset, etc. with my mac i decided to buy airport express but when i put in the disk it said that it could not install the software on my version on os x. someone help i need my network to be set up

    Hello bryon Jimenez. Welcome to the Apple Discussions!
    Most likely your AirPort Express Base Station (AX) came with the older version (4.x) of the AirPort Utilities on the provided CD. However, your new MacBook should already have the new AirPort Utility installed in the \Applications\Utilities folder. Just use this version instead to set up your AX.

  • Latest Software of iOS 7.0.3 Wont install even when I have deleted all  applications.I don't want to buy more memory

    Latest Software of iOS 7.0.3 Wont install even when I have deleted all  applications.I don't want to buy more memory as I have already done.

    What model iPad and what iOS version is it currently running?
    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 7.0.2. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • Can I install an extra router when using an airport?

    I have an airport installed downstairs in my house but the signal keeps dropping in some part upstairs.  Can I instal an extra router upstairs or another airport?

    Welcome to the Apple Support Communities
    Correct. You can connect another AirPort Express, AirPort Extreme or Time Capsule to extend the network from the actual AirPort station. See > http://support.apple.com/kb/HT4145?viewlocale=en_US&locale=en_US

  • Airport express wont show up in utilities wireless or wired

    some times my airport express wont show up in airport utilities on both mine and my wifes macbooks but my i pads and phones keep connection to internet but the books wont. i run ethernet cable to the macbook and sometime it reads the express and some times it wont not quite sure whats wrong.

    Thank you for your post, but I do not understand why you are giving me a link to the generic airport express site. The configuration I have was working fine before I upgraded my router.

  • Cisco 2821 Router as a NTP Server

    We are using a 2821 Router as our boundary router.  It has installed into it a 9 port HWIC for layer 2 switching as well as allowing the router to communicate on the Network Management VLAN.  All of the devices on the Network Management VLAN are segregated from the managed traffic, which unfortunately also doesn't allow them external NTP services.  Can the router be programmed as a NTP server so that all of the network appliances can utilize it for NTP from either it's NM Vlan IP address or from a loopback address?  Thanks in advance for the help.

    What are the commands needed in the router for it to provide time to other appliances?
    If your router has successfully synchronized with an authoritative NTP server?  NOT A THING.
    In my network, only the site's distribution switch is allowed to go out and get NTP.  All other access switch goes to the distribution switch by using the command "ntp server ".  You can have multiple NTP server IP address and if you prefer to have a "favorite" you can append your command with the "prefer" option:  ntp server prefer.
    If you have clients then point their NTP to your router.  For troubleshooting, I prefer the command "sh ntp associate".  If your NTP server IP address starts with a "*" this is good and means that your NTP is synchronized.
    Hope this answers your question.

  • WAAS network module and 2821 router?

    What WAE network modules will work in a 2821 router? This 2821 has a dual-T1 Multipoint connection back to our data center and I know that the users will benefit greatly from WAAS, but I'd rather not have to upgrade the router to a 3800 just to install a WAE module

    NME-WAE-502 will give you full functionality with the enterprise licence. This is the NME that is the most widely used for WAAS.
    NME-WAE-302 is available, but only supports the transport license which give you TCP optimizations only (no application AO support).
    NME-WAE-522 is only supported in the 3800 series routers.
    Hope that helps,
    Dan

  • CS4 Master Collection wont install on Vista Ultimate 64-bit.

    Im using my friends cs4 disc's wich he doesent use any more (switched from windows to mac) and it wont install
    full quality image atached if you cant read this one.

    This is a very close friend we've been working together since high school. but other than that dont you have any ideas whatsoever?
    or is there any way to skip the system profile check, cause i'm prity sure my system is more than adiquate to run cs4
    3.16ghz duo core, 4gb ram, 1gb ati radeon his hd4670.

  • I wanted to update my itunes and it didn't update and now it wont open so i had to uninstall it and it wont install now at all can you please help?

    Hi
    I turned on my laptop this evening to import a new cd but it asked me if i wanted to download the new version of itunes so i went ahead to update it but it failed to update then it failed to open at all, and and runtime error keeps popping up but when i uninstalled it to reinstall it it wont install now and i cant use my ipod or ipad with my laptop without itunes and i never had this problem at all. can you please help?

    Hey maryncomiskey,
    Thanks for the question. I understand you are experiencing issues with the latest iTunes update. The following resource may help to resolve your issue:
    Issues installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    Additional Information:
    How to restart the Apple Mobile Device Service (AMDS) on Windows
    http://support.apple.com/kb/TS1567
    Thanks,
    Matt M.

  • Hi i am trying to install itunes and it wont install due to error code 2349 how do i fix this issue

    i have tryed on numerous occasions to install itunes and it sometimes installs but then i cant use it due to error code 2349, so i uninstall and try again and wont install it at all due to error code 2349 please help i really eant to use my ipod

    Refer to this thread:
    https://discussions.apple.com/thread/3174150?start=0&tstart=0

  • TS5376 iTunes wont install.  It says " The program can't start because MediaAccessibility.dll is missing from your computer.  Try reinstalling the program to fix this problem."  I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked.

    iTunes wont install.  It says "The program can't start because MediaAccessibility.dll is missing from your computer.  Try reinstalling the program to fix this problem."  I have uninstalled iTunes 5 times and reinstalled it, and nothing has worked.  Help!!!!

    Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
    (99683)

  • Hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!

    hi im having huge problems trying to install flash for my mac 10.5 imac, iv gone through the internet and tried all of the solutions, everytime i try to install flash it says cant read the download file, or it just wont install, anybody plz help!
    iv unistalled flash, iv checked plug ins it just wont work,

    It would have been a great help to know precisely what Mac you have, so some of the following may not apply:
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS. Note that version 10,1,102,64 is the last version available to PPC Mac users*. The latest version,10.3.183.23 or later, is for Intel Macs only running Tiger or Leopard, as Adobe no longer support the PPC platform. Version 11.4.402.265 or later is for Snow Leopard onwards.
    (If you are running Mavericks: After years of fighting malware and exploits facilitated through Adobe's Flash Player, the company is taking advantage of Apple's new App Sandbox feature to restrict malicious code from running outside of Safari in OS X Mavericks.)
    * Unhelpfully, if you want the last version for PPC (G4 or G5) Macs, you need to go here:  http://kb2.adobe.com/cps/142/tn_14266.html  and scroll down to 'Archived Versions/Older Archives'. Flash Player 10.1.102.64 is the one you download. More information here:  http://kb2.adobe.com/cps/838/cpsid_83808.html
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications (including Safari) first before installing. You must also carry out a permission repair after installing anything from Adobe.
    After installing, reboot your Mac and relaunch Safari, then in Safari Preferences/Security enable ‘Allow Plugins’. If you are running 10.6.8 or later:
    When you have installed the latest version of Flash, relaunch Safari and test.
    If you're getting a "blocked plug-in" error, then in System Preferences… ▹ Flash Player ▹ Advanced
    click Check Now. Quit and relaunch your browser.
    You can also try these illustrated instructions from C F McBlob to perform a full "clean install", which will resolve the "Blocked Plug-in" message when trying to update via the GUI updater from Adobe.
    Use the FULL installer for 12.0.0.44:  Flash Player 12 (Mac OS X)
    And the instructons are here: Snow Leopard Clean Install.pdf
    (If you are running a PPC Mac with Flash Player 10.1.102.64 and are having problems with watching videos on FaceBook or other sites, try the following solution which fools the site into thinking that you are running the version 11.5.502.55:)
    Download this http://scriptogr.am/nordkril/post/adobe-flash-11.5-for-powerpc to your desktop, unzip it, and replace the current Flash Player plug-in which is in your main/Library/Internet Plug-Ins folder, (not the user Library). Save the old one just in case this one doesn't work.

  • ITunes will download but wont install on windows 7 64-bit computer.

    I got this computer a few weeks ago and first thing i tried to install was iTunes off of the apple site and it wont install.
    i can download the setup file to my computer and save to my documents but when i right click and click run as administrator, a loading sign will appear for two seconds then disappear... i need iTunes on this computer since it wouldnt install on my old laptop. i've even tried installing on safe mode and nothing. i just want iTunes on my computer.. any help?

    Same issue here and unfortanetly no one yet has an answer...

  • Can 10g Express be installed on a machine that has MS SQL2000/2005?

    I just discovered the 10g Express edition and I have been wanting to learn and work with Oracle for some time now so this is awesome.
    I have a Windows 2003 Server here at my house that currently has both Microsoft SQL 2000 and Microsoft SQL 2005 developer and express editions installed on it. This is just a server of my own that I work with doing development work on my own in my own time in the off hours from work so it is nothing that is heavily loaded with mission critical applications or data or anything of that nature.
    I was wondering if I could install Oracle 10g Express on the same machine or if there were known issues in attempting to install it on the same machine as the existing combination of SQL servers that I already have installed?
    I have enough hardware processor and memory wise so that should not be a problem and again I am doing this as a way of learning and getting to know Oracle so I won't have any massive amounts of data or any other users other than myself working on it.
    Thanks,
    Ira

    Tom,
    I fully understand what you mean so no worries there. I am hopeful that my mileage will be a nice round number, the server I mentioned has nothing on it aside from the various database servers I mentioned and a couple of virtual servers that I also run for development purposes, one of them simulating a Windows 2003 Web Server and the other simulating a Windows XP client machine.
    Thanks for the advise and I look forward to my new venture into Oracle.
    Ira

Maybe you are looking for