CCP Template pulldown unavailable

The Application menu pulldown for "Template" is subdued, and I can't use it. I don't think it's a restricted user, since the only one I configured was denied the reload option only. I have two routers discovered, and the tool seems to work nominally on those devices.
What would cause the template option to be unavailable?

Through some trial and error, I found that haveing just one device with a "user profile" in the same community was enough to disable the template option. Please understand that I was trying to copy the template on a second device, that did not have a user profile, and it still failed.
I repeated the experiment by deleting the device with the user profile, then adding it back in. The template option worked. When I created a user profile for device 1 ( I only disabled the reload option ), both device 1 and device 2 could not use the template option, probably because they were in the same community.
Looks like a bug to me.

Similar Messages

23" Cinema Display Templates

I recently upgraded from a 20" to a 23" Cinema Display, but I cant figure out how to make the song templates recognize the size difference. They all still say 20".

Unless anybody else has created them, there are no 23" templates. Sorry about that.
However, all is not lost. Load the standard 20" template in, change the window sizes and do File > Save as Template. Then, when you do File > New, make sure the "Use song template" option is checked. Under the template pulldown menu, select "User" and your lovely template will be found in that list.
Your user created tamplates can be found here:
~user > Library > Application Support > Logic > Song Templates
So, if anyone gives you a template, you can drop in in that folder and it, too, will appear in the User template list. You can even create a folder called Cinema Display 23", if you wish and that will will also be visible.
Hope that helps!
Pete

Fiori Launchpad - tile templates not available

Hi ,
In one of our client environment , only UI addon ( sp07 ) is installed in gateway system and custom SAPUI5 apps are developed.
I want to use New Fiori launchpad for catalog and tile creation . i am able to create catalog but when i try to add a tile the templates are unavailable.
Does tile templates are available only when one of the fiori UI component is installed or it available as a part of UI addon.
Right now i have to use old launchpage for tiles.

Hi Masa,
I have already implemented this note earlier , but now this note is updated with more patches of UI library, can updating the UI library to latest version will solve the problem ??
Regards
Yashpal Gupta

Templates pull-down menu is BLANK

Mystery of mysteries
Final Cut Studio 3 (fcp 7.0.3)
Went to pull a template in from the templates pulldown and low and behold - NOTHING NADA ZIP in the pulldown.
thoughts?

Have you used them before? Did you install Motion Content? That's where the templates come from.
I have only seen this when FCS was installed incorrectly. I'm not saying you did it incorrectly because we all know that "things happen". The only thing I can think of would be to do a clean install of FCS. If you have the disc's stored as DMG files then it shouldn't take more than 25 minutes. Coming off the disk will take longer. If you choose to go this route use FCS Remover.
Someone else may jump in with an alternate opinion but I think something may have gone wrong on the install.

Problem previewing Site Studio Data Files

Hello,
I'm building a JSF webcenter application, which has lots of content that's going to be published using Site Studio.
Using Site Studio Designer, I have created:
- An element definition (WYSIWYG)
- A region definition that contains just the element above
- A region template, that simply outputs the element ()
- A placeholder definition, associated to the region definition and region template above
- Several Contributor Data Files, all of them associated to the region definition above
On the webcenter application:
- Content is shown using WCM_PLACEHOLDER (along with the templateDocName param)
- A link that points to the WCM_BEGIN_EDIT_SESSION service is exposed for the authenticated users
Additional UCM configuration:
- UCM accounts are activated
- Data files are categorized under the accounts created
- There are Workflows to approve modifications on the data files
Everything is working fine, but when reviewing content on the workflow for approval/rejection, the content itself is not displayed. Instead, it gives me the following error message: *"Region template is unavailable"*. I can see that this is the service being called to get the HTML rendition:
http://<server:port>/cs/idcplg?IdcService=SS_QD_GET_RENDITION&coreContentOnly=1&dDocName=PIO-HOME-SERVICOSGRATUITOS&dID=45601
After enabling the trace for "sitestudio" itens, the following gets logged:
SSXA_GET_CACHE_SYNC_INFO [dUser=sysadmin][IsJava=1] 0.03409299999475479(secs)
     !csUserEventMessage,weblogic,ds-imesp-dof2.lab.kaizen.com.br:16200!csFileServiceReferredToBy,http://<server:port>/cs/idcplg?IdcService=REVIEW_WORKFLOW_DOC&dDocName=PIO-HOME-SERVICOSGRATUITOS&inQueueRedirect=1!csFileServiceUserAgent,Mozilla/5.0 (Windows NT 6.0; WOW64) AppleWebKit/534.24 (KHTML\, like Gecko) Chrome/11.0.696.65 Safari/534.24,GET intradoc.common.ServiceException: *!csSSQuickDiffRegionTemplateUnavailable*
     at sitestudio.quickdiff.SSQDFileServiceHandler.qdPrepareDelivery(Unknown Source)
     ... 28 more
Am I missing something? Do I have to configure the region template somewhere else?
Any help would be much appreciated, since I can't find any documentation about this error!
Thanks,
Tomy Inhauser

After 2 days trying to fix this problem, I finally posted it on the forum. 10 minutes later, I found the cause: the content item SS_DEFAULT_REGION_TEMPLATE, which is checked-in on the installation of the Site Studio components, was missing on my environment! (ie, someone deleted it)
Although it is clearly not a bug, it would be very nice for the error message to show the name of the region template that's unavailable, since these "system files" are not protected!

How do I create my own favorite template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to templates, which take more memory. I have a large slideshow, and need all the space I can get

First, how do I create my own favorite theme template for DVD slideshows? I used to be able to select this from pulldown menu, but cannot now do so. I am directed straight to already existing themes, which take more memory. I have a large slideshow, and need all the space I can get. I just want to use a picture as my DVD cover, and then insert a slideshow. Also, when I try to burn my 8.5gb double sided slideshow, all that burns is the music. It is a large slideshow, a memorial on the life of my now deceased brother. This means a lot to me and to my family, and I am having so much trouble trying to burn it. I have gone into Project View and selected appropriately. The bar shows I have room to burn this DVD, but it does not burn. I have burned so many DVDs in the past, but this one just will not burn. I am so confused at this point. I will say this is the first 8.5gb I have attempted to create and burn. My specs list a 7.7gb or 4.7gb as operable....but there are no 7.7gb dvds. I had to purchase 8.5gb. Help? What am I doing wrong? I have spent so much time on this, and just cannot figure it out.

Final Cut is a separate, higher end video editor. The pro version of iMovie.
Give iPhoto a look at for creating the slideshow. It's easy to assemble the photos in an album in iPhoto, put them in the order you want and then make a slideshow of them. You can select from various themes and transitions between slides and add music from your iTunes library.
When you have the slidshow as you want use the Export button at the bottom of the iPhoto window and export with Size = Medium or Large.
Save the resulting Quicktime movie file in your Movies folder.
Next, open iDVD, choose your theme and drag the QT movie file into the menu window being careful to avoid any drop zones.
Then follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
The reason I suggest iPhoto is that I find it much easier to use than iMovie (except for the older iMovie 6 HD version). Personal preferences showing here.

Template Unavailable Error

CF Forum:
On my local machine I developed and tested my cfm templates,
and they work fine.
However, I moved them to our host, and no such luck.
I tried one, and I get the message:
"Error message
The template you requested is unavailable"
So far the technical support at the host is unable to solve
this problem.
You can see what I mean by trying the template:
www.allcreaturesgs.org/List_Cats.cfm
Any help you can give us would be most appreciated.
:Red thru Violet Web Site Works

>> If so, that directory is called "public" and , yes,
the List_Cats.cfm file is there.
>> I also have a list_cats.cfm file there.
Two files with a different case? Are you on *nix?
>> If you mean the highest level directory for the
site, then, no, the files do not reside there.
>> However, I tried them there, and got an exception
thrown.
It should be in the site's root folder. In other words the
same directory where the default "index.htm" page resides
ie:
http://www.allcreaturesgs.org/index.htm
What was the exception?

"Remove pulldown" option unavailable (grayed-out)

My understanding from reading the scant description in the manual, a user should have the option to select "remove pulldown" when importing from a tape-based device. I have been testing FCP X by importing HDV material from a Sony HVR-A1U (1080i) and a JVC GY-HD110 (720p, 24fps). In neither case am I given the "remove pulldown" option. Am I missing something? Thanks for any advice.

The short answer follows:
"pulldown" is only applicable if your source material was originally film and then transferred to NTSC 29.97 standard def. video.
The longer answer follows:
Back in the early days of video, film was transferred to video using a device called a film-chain which consisted of a modified film projector which was pointed at a TV camera. A film projector consists of a light source, the film gate (which is where each frame of film is held in place), a mechanism to advance the film through the projector at 24 frames per second (FPS), and a shutter to block the light while the film is advanced. Normal film projectors have either two or three blades so that each frame of film is flashed before the audience's eyes at either 48 or 72 FPS before the film is advanced to the next frame.
NTSC video is interlaced which means that each frame of video consists of two fields and the shutter in the film chain projector is designed so that the film is projected for a duration of 2 fields for one frame, then the film is advanced by one frame and that frame is projected for 3 fields, then 2 fields, then 3 fields. When the film is advanced throught the gate it is literally "pulled down" through the gate at this 2 field / 3 field rate. Thus the term "2-3 (or 3-2) pulldown. This adds 12 fields per second to the video stream which gets us from 24 FPS to 30 FPS.
The shutter is also designed so that the film is not projected during the vertical refresh period of the video camera.
Hope that helps.

Option to Share Tag Templates via Creative Cloud unavailable.

During Jason Levine's Adobe Max session, "Sort, Select, Cut: Basic Logging, Ingesting, and Rough Cutting with Prelude (S2446)", he illustrates sharing and importing Tag Templates to/from Creative Cloud (see screenshot). For some reason, I am unable to do so; the Creative Cloud icons aren't even present in the "Tag" panel (see second screenshot). I am logged into Creative Cloud through the desktop app, and have restarted both Prelude and my system to no avail. I have also tried to "authenticate" my CC account the "Prelude/Cloud Metadata/Authenticate…" dropdown menu (third screenshot), but when I enter my username/password nothing happens. Has anyone else encountered this problem?
I am running Prelude CC 2014 (2014.2) under Mac OS X 10.10.2. Other CC services, such as the "Libraries" panel in Photoshop CC, are working / synching with CC. The problem seems to be limited to Prelude.
Presented by Jason Levine (Adobe)

Hi David,
Due to improvements to the Creative Cloud backend after the release of Prelude 3.0, the direct "share To Creative Cloud" option has been disabled. You can still share it to the Creative Cloud by using "Save As" and saving to the local Creative Cloud folder. The template will be automatically synced to your Creative Cloud account. You can also search in Spotlight on "TagTemplates" to find the folder that Prelude saves templates into by default, and copy and paste the template into the local Creative Cloud folder. This method avoids duplication in your Tag Template panel. We expect to resolve the issue between Prelude and Creative Cloud for direct sync in the next release. Sorry for any inconvenience. Thanks!
Michael

Unavailable field in DTW template JE

Dear All,
I am confusing why there is no profit center column in the JE DTW template ? I am using 2005A SP 01 PL 45.
I also see the costing code column but if I look for the field definition in the SDK help center file, it said :
costing code
Sets or returns the profit center code related to the specified item.
(field name: OcrCode).
Length: 8 characters.
This is a foreign key to the Loading Factors object, OOCR not exposed through the DI API.
Please give advice which one is correct. Can I use costing code instead of profit center in the JE DTW template ?
Thanks in advance
EDu

Dear
I checked in Demo DB. yes, you can update wrong profit center by DTW.
In the header file , you need to specify the "JdtNum
In line level file , you need to specify the linenum.
hope it helps.
Best Regards,
Xiaodan AN
SAP business one forum team

Any examples of a data template using multiple data sources?

I'm looking for an example report using multiple data sources. I've seen one where they do a master/detail but I'm just looking to combine results in sorted order (sorted across all data sources). The master/detail used a bind variable to link the two defined queries, I'm thinking what I want won't have that, so I'm lost on how to make that happen. I have reports using multiple sql queries and there is a way in the data source pulldown to tell it to combine the data sources. It appears to be a more manual process with data templates, if it's even possible.
Any pointers/links would be appreciated.
Gaff

Hi Vetsrini :
That's just it. Mine is simpler than that. There is no master/detail relationship between the two queries. I have the same exact query that I run in two databases and I want to merge the results (ordered, by, say eventTime) in one report. So I think my results are going to be two separate groups (one for each data source) which I'll have to let BI merge vis XSLT or whatever it uses. That's fine for small result sets but for larger ones, it would be nice if the database did the sorting/merging.
Gaff

800706BA RPC server unavailable in Report Generation toolkit

Hi all,
I've got a problem with LabVIEW 7.1.1 and Report Generation Toolkit (RGTK).RGTK is used to connect to MS-Word, create a new document from template and report test results. Works like a charme when stying local on the respective test machine.
LabVIEWs 'Automation Open' node as wella as other parts of the RGTK have an control 'machine name' so I suspected I could bring a report server into game. Tried it and get an error "0x800706BA - The RPC server is unavailable in myTestVI" (translated from German Windows error).
All the required subVIs to create a document have been put into a small test app. This one runs fine when running on the desired report server, but fail when opened and run on the devellopment machine.
I have searched extensively for that error code and have changed some port settings in the firewalls and some services settings with no success. Can anyone help me out?
BTW, on the remote machine a new process named WINWORD is started, but nothing more.
TIA!

Hi Lul,
The error 0x800706BA is, as you said, a windows error (and, btw, your translation was correct as the original title is "The RPC server is unavailable").
You can try to fix it with MicrosoftFixit :
http://go.microsoft.com/?linkid=9666880
Beside, more links that could be of some use :
Windows Update error 800706BA:
http://windows.microsoft.com/en-US/windows7/Windows-Update-error-800706BA
Microsoft answer about error 800706BA:
http://answers.microsoft.com/en-us/windows/forum/windows_other-windows_update/microsoft-updates-fail...
In addition, a KB which is also related to this "RPC Server unavailable" in our IT database:
How to fix MSI software update registration corruption issues:
http://support.microsoft.com/kb/971187
Regards
Florian Abry
Application Engineer Group Leader
NI Germany

Error while loading journal template in fdm 11.1.1.2

Hi Guys,
I am using Fdm 11.1.1.2. I am getting the following error while loading a journal template
The following error I am getting while loading the template while using the option Select file from inbox
Error- The remote server machine does not exist or is unavailable
The following error I am getting while loading the template using the option upload file
Error- file upload attempt failed.
Detail- access to the path c:\hyperion\products\financial data quality\web server components\website\temporary export files\admin******.temp is denied
An early response is highly appreciated
Thanks & Regards
pss

Hi,
Did you drop it as ADF table? Can you post the code snippet of your jspx page?
-Arun

Creating a template in Financials for using with XML Publisher..

to whom..
I hope someone can help please. I'm trying this process for the first time so please bear with me..
Ive got everything in place for producing PDF reports via XML Publisher through ORACLE Financials but I'm stuck on the last
part.
According to the notes (Publishing Concurrent Requests with XML Publisher - An Oracle White Paper Jan 2005) I've come
across, I need to update the concurrent program definition with a default template (when you submit a request, its in the
'upon completion' last section where theres an option to change or enter a template layout) yet this section is GREYED OUT.
Now according to my notes, to create a template you..
"Setting a Default Template....to select a default template in the Update Concurrent Program page available from the System Administration
responsibility (Note that this field is available only from System Administration. It is not available from the System
Administrator Forms interface)......."
My query is, where is this 'Update Concurrent Program page'..?
Thanks In Advance..
Steven
Edited by: user554089 on Sep 16, 2008 4:02 AM

OK, so now I've found out how to 'default a template for EBS 11i' (System Administration > Concurrent > Programs - notice its Administration not Administrator)... but its unavailable.. in the the 'OnSite Setting' tab there was no box visible for me to enter a template filename. Does anybody know why this could be?
thanks,
Steven

Flash banner in a Dreamweaver Template

Hi all,
I am using one of the provided Dreamweaver Templates (CSS).
All is fine, except that for some reason it does not like Flash
imports. I can alter the template as much as I like and it will
always successfully change across the site, BUT if I try to insert
a Flash movie/banner into the template - then it does not appear of
ANY of the site files. The only way I can see the flash banner, is
if I open the template.php file in a browser - then you can see
that it is in fact there and working - but for some reason the
other pages refuse to acknolwegde it. Images / Tables / Text - all
work fine - just not flash banners. I even tried saving the banner
as a JPG file in Flash, then sticking the JPG file in the template
where the banner should - and it worked perfectly, but as a .swf
extension it fails.
Am I missing something?
Nathan

> BUT if I try to insert a Flash movie/banner into the
template - then it
> does not appear of ANY of the site files.
Because of the active content .js fix, when you insert a .swf
file into a
template, you must use a Site Root relative path for it.
Open the .dwt template file.
Double-click on the .swf in design view- the "browse to file"
dialog box
should come up showing the currently selected file.
look in the bottom of that dialog box for the pulldown to
change from
document relative path to site root relative path. Change it
to site root.
click okay and save the file, and let changes propagate.
does it show in the child files now?
[note- It may still not show during local preview because
site root relative
paths in javascript will not make any sense during local
preview- they
should work fine on the remote host if the site has it's own
domain name
though]
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

CCP Template pulldown unavailable

Similar Messages

Maybe you are looking for