Ccplauncher will not install on my iMac with os 10.9.3 get message Oops something has gone wrong, please try again

Tried to install the mac version of ccplauncher i then got a message oops something has gone wrong, please try again.

I have allow apps from anywhere already set on my packaging system. And it was working prior to the update. It went through a self updating process and now gives this error. It's almost like a networking issue, like it can't complete communicating with adobe, because a reinstall doesn't resolve the issue.

Similar Messages

  • HT201177 I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram

    I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.

    The latest version of Adobe FlashPlayer can be obtained from here:
    http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
    You can check here what version of Flash player you actually have installed:  http://kb2.adobe.com/cps/155/tn_15507.html
    You can check here:  http://www.adobe.com/products/flash/about/  to see which version you should install for your Mac and OS.
    You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
    http://kb2.adobe.com/cps/909/cpsid_90906.html
    and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe.

  • Help! my windows PC with Vista will not dowload itunes 10.7.  It gives me an error message: Your system has not been modified

    Help! my windows PC with Vista will not dowload itunes 10.7.  It gives me an error message: Your system has not been modified.I
    I have tried unistalling the current version I had which was 10.6.3, defragging and running a security scan. Now, the highest version I can get is 10.4.1. for some reason I cannot dowload itunes 10.5 or higher as it gives me the same message which is what I need to connect and update my iphone.  Anyone facing the same issue or can point me in the right direction?

    You may get better information on that error message by reposting in the iPhone forums:
    iPhone
    It's also possible that newer iPhone updates want an OS higher than Tiger. Post the specs of your computer and we can see if an OS upgrade is possible. There are a large number of G4 variants with different capabilities, so giving us something more than  just "G4" will get you help faster.

  • Something has gone wrong with my version of pages since I did an update on 18th January

    Something has gone wrong with my version of pages since I did an update on 18th January. I get an error message
    "You need a newer version of Pages to open this document"

    You have 2 versions of Pages on your Mac.
    Pages 5 is in your Applications folder.
    Pages '09/'08 is in your Applications/iWork folder.
    You have a problem when opening a file with the wrong version.
    Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
    Pages 5 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
    Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
    Anything that is saved to iCloud is also converted to Pages 5 files.
    All Pages files no matter what version and incompatibility have the same extension .pages.
    Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
    Note: Apple has removed over 100 features from Pages 5 and added many bugs:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
    Archive/trash Pages 5, after exporting all Pages 5 files to Pages '09 or Word .docx, and rate/review it in the App Store, then get back to work.
    Peter

  • Something has gone wrong with my external hard drive after my macbook battery went off.. now i cannot paste or create new folder. Does anyone know how to fix this?

    something has gone wrong with my external hard drive after my macbook battery went off.. now i cannot paste or create new folder. Does anyone know how to fix this?

    Bus powered external drive?
    Backups?
    Does Disk Utility can see and repair the drive or not?
    Also try here in future:  MacBook Pro

  • [Kinda solved] "Oh no! Something has gone wrong." with gnome-fallback

    After some upgrades today, I got with an unusable gnome. On every startx it failed with the window "Oh no!  Something has gone wrong. A problem has occured and the system can't recover.  Please log out and try again." (forcing you to close the session, just to reappear on restart)
    After ~6 hours on this, and downgrading several packages to no avail, I discovered that the file /usr/share/gnome-session/sessions/gnome-fallback.session had been removed.
    As I use gnome-fallback, the dconf key “org.gnome.desktop.session” contains “gnome-fallback”, and that apparently requires such file to exist
    If you need to change the key with command-line:
    gsettings set org.gnome.desktop.session session-name gnome-fallback
    I finally got a working system by copying /usr/share/gnome-session/sessions/gnome.session to /usr/share/gnome-session/sessions/gnome-fallback.session and changing -use a text editor- its line "RequiredComponents=gnome-shell;gnome-settings-daemon;" to "RequiredComponents=metacity;gnome-settings-daemon;gnome-panel"
    I hope this serves others to fix this issue.
    I still miss the upper applet bar (although perhaps due to uninstalling then reinstalling gnome-panel), and key shortcuts (such as Alt-tab) are not working, but most functionality is there.
    If you end up at a desktop with no menus, a way to work is to make in the desktop a symlink to /usr/bin/gnome-terminal.

    I apologize for my post above....it's misleading.  The bug in question is regarding a similar failure with gnome, but involving the standard session, not fallback.  The fallback issue may be one of deprecation, I've read that gnome was no longer supporting it as software rendering was considered 'good enough'. 
    So if you are having the issue described in the OP you may want to file a separate bug.  I posted my bug here as a result of a quick skim of the post and replies to it.  After re-reading it, I see they are separate issues.

  • I can't open 1 website 'consumentenbond.nl' since a week. get: 'An internal server error occurred. Please try again later.' but i can open it with explorer. all other websites work perfectly with mozilla.

    i can't open website: 'consumentenbond.nl'
    since a week.
    i get: 'An internal server error occurred. Please try again later.'
    but i can open it with explorer all the time.
    all the other websites are working perfectly with firefox.

    Try clearing the cache and deleting cookies for the site, this can sometimes help with accessing a site that previously worked. For details see [[how to clear the cache]] and [[deleting cookies]].
    For other things to check see http://kb.mozillazine.org/Error_loading_any_website#Error_loading_some_websites

  • PSE 8 will not install on new imac OSX Snow Leopard

    28. Feb 26, 2010 4:16 PM in response to: docmark86
    Re: PSE8 will not install on Mac Snow Leopard 10.6.1
    I have a new iMac 21.5 screen with OSX Snow Leopard.  I installed IWork and turbo tax with no problem.  Nothing else.
    PSE 8 installation fails after about 80% installation just as install for PSE 8 starts. I've spent hours on the phone with Adobe and they blame it on OSX   Error analysis states:   "Uncaught JavaScript exception: Unable to read Adobe file version for path /Library/Fonts/MinionPro-Bold.otf  Apple techs have also tried."   The latest communications from Adobe instructs me on validating fonts.  We have also tried  CS3 Clean Script since the install failed several times. Case # is 0181442609.    Nothing works and Apple techs are still researching.  Any suggestions from an Adobe professional?  I am new to the Mac environment so any complicated actions may require some "hand holding".
    Thanks to all!
    Doc

    Doc, I would suggest go to the font location which from your post is: <Macintosh HD>/Library/Fonts/MinionPro-Bold.otf. There should be a font file with this name. If it exists, just "cut" it from this location and paste it on the desktop for some time and then try to install PSE again and see if that works.
    If the font file doesnt exist and instead an empty folder names "MinionPro-Bold.otf" exists, then delete the folder and then try to install PSE again.
    In either case, please do attach the installer log file in the forum thread so that I can have a look at it. They can be located at the below location:
    <Macintosh HD>/Library/Logs/Adobe/Installer/"...Adobe Photoshop Elements 8.0...."
    If there are multiple copies of the installer log files, then please delete them and then try to install PSE 8 again. If it fails, quit the installer and attach the new log files which are generated to this thread.
    Regards,
    Ankush

  • Avast for mac will not install unless I close safari and mail but both are closed. I turned off computer and started again but same message appears.

    avast antivirus for mac will not install unless I close safari and mail which are both off. I have shut down my imac and started again but same message when I tired to install. Help please.

    jejerry wrote:
    do you use any antivirus software ...
    In General 3rd Party AV Software is Not Required as Mac OS X tends to look after itself.
    Read Here  > https://discussions.apple.com/thread/4545776?tstart=0
    See Here  >  Antivirus Discussion

  • I am getting "Error in accessing iTunes store. Please try again later." Error 0x80092013. I have just downloaded and installed current version of iTunes, and have the 2013 Norton IS. My proxy server is letting me got to iTunes, but cannot login.

    I have a proxy server and the server is allowing me to go to iTunes. But I get a message "Error in accessing iTunes store. Please try again later." Error code ox80092013. I cannot find that code in the troubleshooting section. I have just installed a new PC HP5750, with Norton IS 2013. I installed the current version of iTunes directly from the iTunes site. My proxy server is American Family Online web browsing filter. I contacted them and they said there should not be a problem with their server. I have had an account previously, but has been inactive for several months. I even tried to create a new account, but still got the same error code.
    Someone please help with this. I have accompaniment tracks on iTunes that I need for music ministry.

    Hi Lcoffin8,
    Thanks for visiting Apple Support Communities.
    See this article for additional information and steps that can help:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/ts1368
    Regards,
    Jeremy

  • Mac OS 9 will NOT install on 350MHz iMac

    recently i acquired an old imac g three, and it has 256mb of ram and it had a password set on it so i decided to format the disk and installed 10.2 on it. turns out in order to install panther i need to install the firmware update so i have to make a partition of os 9 and install it. problem is the computer will NOT RECOGNIZE THE DISC. i have tried holding c, holding option, and formatting at least three times (while checking install mac os 9 drivers) to install the outdated abandonware and IT DOES NOT WORK.
    could it have to do with the pram battery being out? i know some people who have this problem however. it's very annoyig and i just want to get this thing back on its feet.
    thank you if you can help.

    The 350 MHz iMacs built between Oct. 1999 and July 2000 (model identifier PowerMac2,1) originally shipped with OS 8.6.  These came in six colors:  Blueberry, Grape, Strawberry, Tangerine, Lime, and Graphite.  You need a full retail copy of OS 9 to install on this iMac.
    The 350 MHz iMacs built between July 2000 and Feb. 2001 (model identifier PowerMac2,2) did ship with OS 9.0.4.  These came five colors:  Indigo, Ruby, Sage, Snow, and Graphite.  You'd need an OS 9 original disk for these machines or a full retail copy of OS 9 to install on it.
    Apple made hardware specific original OS install disks for each model of iMac that shipped.  If you put these original disks in a machine that didn't have the correct hardware, they wouldn't work.  So you may have a copy of OS 9 that was shipped with a different version of the iMac you have. 
    You can check eBay for retail copies of OS 9.
    All that being said, it might just be the PRAM battery.
    Good luck.

  • ScanGear MX700 Drivers will not install on new iMac

    I am new to Mac, so I'm not sure if I am missing a step. Using the install disk that came with my new Canon MX700 I installed the scanner drivers in the series:
    ScanGear MX700 series 1370.mpkg
    IJ Scanner Selector 220.pkg
    ScanGear MX700 series 1370.pkg
    ScanGear MX700 series Network 1370.pkg
    After I load each package, I allow the computer to restart to complete installation as suggested after each download.
    I've turned the printer off and on (using USB to connect to iMac). When I attempt to scan using the menu on the Canon, a window pops up: "Scanner is not selected. Click [Scanner Selection] to select scanner. Scanner driver will be closed." When I select "Scanner Selection" another window opens called "Canon IJ Network Scanner Selector" but there is nothing in the Network Device List to select. Under TWAIN Data Source Name is "Canon MX700 series Network", but there is nothing with a MAC Address. I am unable to select anything and that is as far as I've gotten.
    HELP!

    If you are using the control panel on the MX700 to scan, then after you press the SCAN button, you are prompted to select the connection method > Local (USB) or 'LAN Connected'. Based on the message you are getting, and since you have the MX700 connected via USB, I would guess that you are selecting 'LAN..'. If at this stage you use the arrow up or down key to select 'Local', then I believe you will not get the message.
    If you are scanning from your iMac, rather than using the MX700 Control Panel, then you do not need to configure the IJ Network scanner since you have the MX700 connected via USB.
    You should be able to open an application like Image Capture to check the USB connection. If a message stating that 'No Image Capture device is connected', then click on 'Devices' and then 'Browse Devices'. The 'Image Capture Device Browser' should appear showing the MX700 under TWAIN Data Sources. If you select this entry it should show it as connected. If it doesn't show it as connected, then you could have a problem with the USB cable. A previous post had a Canon user capable of printing but they were unable to scan and the included USB was the fault.
    If the connection is okay you should be able to scan using the Image Capture application. After the prescan is performed, you must select a portion of the displayed image using your mouse by dragging from one corner to the opposite corner. Now the SCAN button will be available.
    Note also that you can use the Preview application to scan.
    HTH
    PaHu

  • Firefox upgrades will not install on my Mac with OSX 10.8.2, I am stuck on Firefox 13

    I have a mid 2012 MBP with Retina display. When I try to install Firefox upgrades i Get the message that teh update will not be installed, are you running more than 1 copy of Firefox. This occurs no matter what I try even from a restart. Activity monitor only shows one copy of Firefox running
    I reset Firefox to the default and that did not help, I started in safe mode and that did not help.

    Hi mike_bauer
    If there is an issue with update or permissions the better, quickest and safest way is to '''download and install''' firefox:
    1. Download a copy of the latest firefox from http://www.mozilla.org/en-US/firefox/all.html
    2. '''''Trash''''' the current Firefox application to do a clean install.
    3. Install the version that you have downloaded.
    Do not select to remove your personal data, your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks or other personal data.
    see also: [https://support.mozilla.org/en-US/kb/install-firefox-mac?redirectlocale=en-US&redirectslug=Installing+Firefox+on+Mac Installing Firefox on Mac]
    thank you
    Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

  • FF4 will not install on my iMac g5 running OS 10.5.8.

    I have downloaded Firefox 4.0 several times, however each time I try to install it on my iMac G5 running OS 10.5.8, I get a message that says "You can't open this application "Firefox" because it is not supported on this architecture."

    Firefox 4 will not work on a PPC Mac, it requires an Intel Mac. There is a third-party build that will work on the PPC Mac, for details see http://www.floodgap.com/software/tenfourfox/

  • Adobe Reader will not install to my IMac OSX 100.7.5

    When I have a program open and want to download a PDF file that is when I get message to install Adobe Reader in order to print the PDF, when I try to download the Reader it either goes through the install action and says it is downloaded or it tells me the Adobe Reader is already installed.  Message doesn't matter because it is not downloaded and installed.  The only thing I find in my Finder download section is the Adobe Reader install download.  I have tried this so many times.  When I first got my Mac I downloaded the Adobe Flash Player with no problem.  Any suggestions?

    Ok. Thanks Mike.
    It would be nice if Adobe published the correct information then.
    The Flash Player page specifically shows 12.0.0.4 for Safari, FireFox and Opera. http://www.adobe.com/software/flash/about/
    Correct info would have prevented a pointless waste of time. The other Flash Player test page also reports the wrong information when viewing via Safari and FF.
    http://helpx.adobe.com/flash-player.html
    See screenshots below.

Maybe you are looking for