CCR -Queue Status "SYSFAIL"

Dear all,
While doing CCR i am getting the error with queue status as "SYSFAIL" in inbound queues of APO, When displyed the same saying " Enter Purchase Group" When displayed data from LUW in binary code shows material as semifinished material is it right?
I am unable to find out the material for which it shows this error, This error apperaed first time.
Please help me out How can i trace this error.
Regards,
Amol

Hi,
What says the application log (SLG1)
You can look there by the "TID of First LUW" entry and search by "External ID" field in SLG1.
Usually from there you can get order number, material number, plant and some other useful data. Does it bring more light?
btw. "Enter Purch. Group" error usually is seen in the inbound queue, when the purchasing group of the material master is not maintained. See SNP2 tab of the material master - it should be filled.
br,
Mikhail

Similar Messages

Where to search for R3A* queues in status SYSFAIL in my system.

Hi Experts,
Can anyone tell me in which Tcode or table I can search for the below entries. I am trying to find out these entries as one of CRM team member had mentioned the below one.
R3A* queues in status SYSFAIL were detected in your system. As a result, changes in the R/3 system have not been updated in the CRM system.
Regards
Srujan K

Hi Muthu,
Can you please tell me what are these Queues belong to, meaning which is repsonsible for what in SRM?
R3AD_ATTRIBUTE
R3AD_CLASS
R3AD_CUSTOME0000000043
Do we as an SRM consultant have to monitor the SMQR queues also?
please clarify me on the above 2 points.
Thanks in Advance!!!
Regards,
Srujank

Inbound Queue R3AD_SAL_ERR in Status SYSFAIL

Hi
In CRM 2007 i get this inbound queue R3AD_SAL_ERR in status SYSFAIL.
Could you please let me know why this error occurs and the steps to solve this error.
Regards
Masthan

Hi Masthan,
I hope the below mentioned notes will help you to some extent :
1372859
608332
Thanks and Regards,
Vignesh Ravikumar

Queue status stopped

Hi All,
I am trying a file to file scenario. In SXMB_MONI the message status is "scheduled" and the queue status is "stopped".
I have tried deregistering and registering the queue.
i also tired to see the error in by double clicking on the queue ID it shows SYSFAIL. when i double click on SYSFAIL it shows a message "XI ERROR Update XI Cache Queue Stopped". for this i have also refreshed the cache. but nothing seems to help.
Anyone having a clue?
Thanx in advance.
Latika.

Hi Latika,
Reason,
http://help.sap.com/saphelp_nw04/helpdata/en/49/e3fb40ef74f823e10000000a155106/content.htm
1. Try restarting J2EE stack.
2. One of the reason may be database overflow. In this case also, restart is required.
3. Check if XIAPPLUSER & XIAFUSER are locked. Also retype the password and try.
Check out Steve Winkler's response here
To Be Delivered on Adapter Message for JDBC
Regards,
Prateek

Status SYSFAIL in SMQ1

Hi All,
We are getting an error message with status "SYSFAIL" in SMQ1 while replicating the BP from CRM to ECC and the message goes like "The current application triggered a termination wi th a short dump."
The BDoc status is in YELLOW status.
Please help us to fix the issue.

Hi,
1. Read this note Note 430980 - CRM Server: Analysis in delta data exchange R/3->CRM
They have error status 'SYSFAIL'. This is only the case if there is a technical problem with the receiving system (for example, a database problem on queue tables QRFC, ARFC). The problem must be corrected on the CRM server, and then you can restart the queue. Generally, a short dump is then displayed on the target system, which provides more detailed information on the cause of error.
2. Check entries in tr. smw01.
Denis.

Messages stucked in moni with queue status as "RUNNING"

Hi All,
Few of messages stucked in moni with queue status as "RUNNING" from the past 6 to 7 hours. all the stucked messages running on same dialog instance app server 03 (ucobpi03_PIP_03). i checked PIP appserver its working fine.
Can any one please expalin me how to clean the queues..is there any effect of other queues ?
Thanks,
Siva.

Hi,
it can be due to multiple reasons....
check the interface logic built ...it can be either due to this or can be of large volume of data...
Also check the queues have been registered or not...
HTH
Rajesh

** Message being processed - Queue status green colour

Hi Friends,
Many messages in our SXMB_MONI shows green color in the queue id column. It shows 'Message being processed'. All messages are in queue, still they are not delivered. Processing takes more hours. These messages are not EOIO queue. While we check this thru SMQ1 and SMQ2 it shows 'Running'. So, what could be the problem ...?
Kindly help friends, to solve this issue. (Points rewarded for helpful answer)
Kind Regards,
Jeg P.

HI,
QUEUE STATUS RUNNING BASICALLY MEANS THT
The first LUW of this queue is currently being processed. If a queue in this status hangs for more than 30 minutes, this may mean that the work process responsible for processing this LUW has been terminated. In this case you can activate this queue again. Note that activating a queue in status RUNNING may cause a LUW to be executed several times if this LUW is still being processed in the target system at that time. We therefore recommend a waiting time of at least 30 minutes before you reactivate the queue.
HOPE THIS WILL SOLVE THE PROBLEM
PLZ REWARDS POINTS
VIKAS

Server Admin doesn't show Print Queue status

When I look at my print queues (all 17) under Server Admin, it shows queue name, # of jobs, shared via (IPP & SMB), and printer kind (HP LJ 1022n and HP LJ P2015). It has a column for status, but this is always 100% empty/blank. Also, if I go to the Jobs tab, then I can pick "Jobs on Queue" for all the queues, but the line below for "Queue Status" is again always blank.
Is there something I can do to get this info to show up in Server Admin? I know that CUPS knows the printer status, as I can go to localhost:631 and see the status in the Printers list and the Jobs list.
It isn't life threatening. It is just annoying to have to go to the web page when Server Admin -almost- gets me everything I need to diagnose a teacher's printing problem remotely.

Hi Keith
You could always consult the Print Service logs. If you set the logging levels to Debug or Debug2 you should get everything. You have to be a bit careful with this as the log can get quite large. Other than that I don’t know of anything that is available out of the box.
There may be others that can suggest a 3rd party solution that gives you the appropriate feedback you are looking for. Opening port 631 should not be that much of risk I would have thought?
Tony

BW Queue Status Stopped: SXMB_MONI

Hi
I am passing data from XI to BW into a Data Source via Inbound Proxy. The problem is for some of my messages I get the status as Green Flag(Queue Status- Stop)in SXMB_MONI.
That means all those Messages are not posted to Data source even though they are successfully transferred from XI.
If I manually try to restart them. It says that the message are already scheduled in Queue. But in Queue there is no entry.
Should I regenerate my proxy? Even though out of 10 I still have 6 successful Messages and rest 4 as Queue status stopped.
Can anyone suggest what can be the problem?
Regards
Swetank

Hi,
is there any trasaction in BW where you can register your Queues. somthing like sxmb_Adm--> register Queues...
B'cos this was the same problem that i encountered when i was using another client(105) in XI-IS when executing server proxies. Then the queues in the client system were not registered.
so check if there is any place in BW system where you can register the queues.
cheers,
Siva maranani.

Queue Status is showing Stopped

Folks,
I am trying to pass IDOCS from XI and the Queue Status is showing Stopped . I am using two receivers.
Please let me know how to start the queue.
Manish

Still the queue is showing stooped , here is the trace ,
<i><b> <Trace level="1" type="B" name="IDX_INBOUND_XMB" />
- 
<Trace level="1" type="T">User: XIAPPL</Trace>
<Trace level="1" type="T">Language: E</Trace>
<Trace level="1" type="T">Correct Version from 2 to 3: 3.X-Data to 4.x-Data</Trace>
<Trace level="1" type="T">ALE-AUDIT-IDoc-Inbound Handling</Trace>
<Trace level="1" type="T">IDoc-Inbound-Handling</Trace>
<Trace level="1" type="T">Syntax-Check-Flag</Trace>
<Trace level="1" type="T">IDoc-Tunnel-Flag</Trace>
<Trace level="1" type="T">Queueid</Trace>
- <Trace level="1" type="B" name="IDX_IDOC_TO_XML">
<Trace level="1" type="T">Get the Metadata for port SAPST4</Trace>
<Trace level="1" type="T">Convert Segment-Definitions to Types</Trace>
</Trace>
<Trace level="1" type="T">Set Receiver Routing-object</Trace>
<Trace level="1" type="T">Exit Function IDX_INBOUND_XMB</Trace>
<Trace level="1" type="T">COMMIT is expected by application !</Trace>
<Trace level="1" type="B" name="CL_XMS_MAIN-ENTER_XMS" /></b></i>
Can anybody let me know what is the problem

Queue status is stopped

Hi,
I have a File to Proxy assync. scenario. The file has been read, and then the message stops in the queue. I checked it on sxmb_moni, the message is posted on a queue and the queue status is "stopped" (with a red stop button printed on).
I have already read all the posts about this and couldn't find any solution... Can anyone help?
Thanks.
Shwetha

Yes connection is set proper now.
And the scenario involves EOIO
Since it is EOIO, i would suggest that you see the status of the messages in RWB (it may be in Holding)....if it is Holding then follow the lead given in this blog: /people/stefan.grube/blog/2006/04/27/how-to-deal-with-stuck-eoio-messages-in-the-xi-30-adapter-framework
Regards,
Abhishek.

Message Status as "Scheduled" and Queue Status "Queue Stopped".

Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena John

Hi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.

Message Status "Scheduled", Queue Status "Queue Stopped"

Hi friends,
My scenario is from Peoplesoft -> XI -> BI
Message has reached BI, but in SXMB_MONI, its showing Message Status as "Scheduled" and Queue Status "Queue Stopped".
How to proceed further ? How can I start that queue ?
Thanks ain advance,
Neena John

Hi Neena,
Go to SXMB_ADM -> Manage Queues -> Register Queues
More on queues
XI : How to Re-Process failed XI Messages Automatically
Run the report RSXMB_REGISTER_QUEUES and register the queues
Run the report RSXMB_RESTART_MESSAGES for restarting ur messages
Refer this:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/20bb9649-e86e-2910-7aa9-88ed4972a5f6
Regards,
Vinod.

BPM queue in SYSFAIL

Hi
I am trying to trigger a BPM scenario. I get the messages, three input files, successfully processed iN SXMB_MONI. However I am not able to see the message processing of BPM there. SXMB_MONI_BPE doesn't show any BPM workflow itself.
I clicked on the PE under Outbnound and saw messages in queue with SYSFAIL. I deleted the queue and triggered again still the messages are in the queue with SYSFAIL.
Why do I get that ? Could it be because settings or configuration of BPM are wrong ?
How do I proceed further ?
Harish Babu

Hi, see this blog.
/people/prasad.illapani/blog/2007/04/27/performance-tuning-checks-in-sap-exchange-infrastructurexi-part-iii
to check the correlation use the pattern BpmPatternSerializeMultipleTrigger and BpmPatternSerializeOneTrigger as reference. its located in SAP_BASIS Software Component.
Remenber that i dont know what kind of piking file you have in BPM so y give you both.
the TCode is:SWF_INB_CONF. this kind of configuration apply to ccbpm BpmPatternSerializeOneTrigger.
see this blog that reference to the Delivery Mode:
/people/milan.thaker/blog/2008/07/04/delivery-modes-in-bpm
Also, as recomended in a previous post, deleter all entries in the transaction SWWL filtering by Type= F and all other fields in blank.
Letme Know.
Thanks
Rodrigo P.
Edited by: Rodrigo Alejandro Pertierra on Jun 25, 2010 9:47 AM
Edited by: Rodrigo Alejandro Pertierra on Jun 25, 2010 9:52 AM

I want Queue status weather it is Active or inactive

HI,
please any one let me know information about the Issue
i want Queue status weather it is Active or inactive
from which file weblogic server will get information
Reply me as early as Possible
Regards,
Srinivas

U can use the follwoing JMX Code
http://weblogic-wonders.com/weblogic/2010/01/21/jms-resources-using-jmx/

CCR -Queue Status "SYSFAIL"

Similar Messages

Maybe you are looking for