CCS - Making Progress But...

I started from scratch by creating a block model so I can understand how CSS works to control the layout of my site. I understand it so much better now.
http://www.billyraygun.com/brd/index.html
However, as I build the site, I end up with a blank space above and below my navBar and above my footer. The link below is how things are progressing compared to my block model link above.
http://www.billyraygun.com/brd2/index.html
I can't figure out why the extra space is happening. When I change my background position from bottom left, to top left, all it does is move the dead space to another location. It doesn't solve my problem of removing the space(s) entirely.
I'm sure this is a simple fix, but I can't figure it out and could use some help please.
Regards,
william-01

Browser variation being what it is, you may never achieve exactly what you want. CSS divisions do not behave the same as tables. So unless you build your site entirely with images, it's never going to look 100% exactly like a PhotoShop comp.
Remain flexible with your designs. Don't spend too much time agonizing over stuff you can't control. A couple of pixels here or there are not going to matter one bit to your site visitors. What matters most is how well the site performs and if it's web accessible for all users.
Good luck with your project,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

Similar Messages

I transfer all my games from my iphone to my pad, but the game progress is lost.... i signed on to game centre it shows all my scores and progress but when i try to play with the games, all my progress and scores disappears... can anyone help???

I transfered all my games from my iphone4s to my ipad, but the game progress is lost.... I signed on to game centre it shows all my scores and progress but when i try to play with the games, all my progress and scores disappears... can anyone help???

Hi bubbles213,
The best way to move information from one iOS device to another is to back up the device using iCloud or iTunes (or both), and then restoring the new device from it. This article will walk you through the steps:
Transfer content from an iPhone, iPad, or iPod touch to a new device
http://support.apple.com/kb/HT2109
Cheers,
- Judy

HT1725 music download seems to be stuck, not making progress

music downloads seem to be stuck, not making progress

I'd report the problem to the iTunes Store, then.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the item, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.

Download Manager-Showing Download in Progress, but nothing being downloaded

I am trying to download 7.10 GUI. The DM is able to connect to the Marketplace and gives the message that download in progress.But at the bottom giving another message "The request failed 401/An error occured while reading the object from the marketplace.
Can anyone please help in resolving the issue?
Edited by: Pete on May 13, 2008 11:24 PM

Hi Try this
https://service.sap.com/swdc
Installations & Upgrades-> Entry by Application Group-> Installations and Upgrades" SAP Technology Components" -> SAP SOLUTION MANAGER" SAP SOLUTION MANAGER 4.0-> pick your platform
You have to configure the Maintence optimizer
Check the sim files at https://service.sap.com/RKT-SOLMAN
You can download the sim files so that you can configure the maintenance optimizer.
Do you have SAP Tutorplayer installed ? If not install it from the below link
https://websmp109.sap-ag.de/~sapidp/011000358700001572552002E

They say my iCloud is full. My computer says 22 G out of 25G available. Have tried making contact but it's the most unhelpful help system imaginable.

They say my iCloud is full. My computer says 22 G out of 25G available. Have tried making contact but it's the most unhelpful help system imaginable. Is this the only way to contact the people who sell this stuff. Have tried phone. Doesn't work.

iCloud can be used in two ways.
The first is a central storage location for documents and data used by apps/applications, that enabled you to open that app/application on any device and see and work with your documents regardless of which device you are working on. A simple example would be to start a pages document on your Mac and then complete it on your iPad, without any copying, moving, uploading, searching through filing systems to make this happen.
The second use is for back ups of your mobile device, which can be used to restore those devices should the need rise for whatever reason.
The concept is all quite simple really, although it can become a little more difficult to understand where things might be going wrong if you find yourself in such a situation.

How long should it take me to sync approx 20GB of data to a brand new iPhone? How can I tell if it is still making progress? Will texts, IMs, calls, interrupt it

How can I tell if it is still making progress? Will texts, IMs, calls, interrupt it and cause me to have to start over??
Thank you!!

Should be a couple of hours, max, if antivirus is not in the way. I've read several times that you might have to actually remove the antivirus software from the PC.
I'm on a Mac, so I have no info on antivirus or how to locate hidden software on a PC.

I would like to get data analysis for solving statistic and making graphs, but this function is not in add-in. How should I do? I also set up microsoft office for mac 2011.

I would like to get data analysis for solving statistic and making graphs, but this function is not in add-in. How should I do? I also set up microsoft office for mac 2011.

Microsoft didn't include that with the 2011 version.
There is a third-party application that substitutes for the add-in: http://www.analystsoft.com/en/products/statplusmac/
They also have a limited, free version.

Ok making progress on the image sequence importing but...

I have successfully imported images into Fireworks and then exported them for use in Edge using John Dunning's Edge Animate Extension. When I import them into Edge the only way to get them in is to import them as a symbol. Is there any other way or can I extract images in the symbol so they are in frames in the timeline? What I am trying to accomplish is using the scroll features in Muse so the animation animates when you use the scroll bar. As a symbol it just plays. Any advice would be greatly appreciated.

I don't know if it will help but you should avoid the extra dot in your image name. That's a known problem area. I'd put the images in a folder called Scene3_RH2_Exterior_Rbpm then name them something like S3RH2ExRbpm_0050.tif or even simpler just use the Rbpm_00050.tif
If you checked out the 0114 image and it's ok but as a single image but incorrect imported as a sequence then the numbering scheme is probably being misinterpreted.

My Process status is in progress but all the subprocess are completed

Hi,
I have a problem, i started a process with 4 subprocess. One of the Subprocess didn't finish its activity and it's status remain "in progress".
In the context data of subprocess i didn't see any information. Now if i try to suspend or cancel it i get this error message:
Error during the process.Number and instance Id's of the processes which can not be suspended
how can i delete it from Process istance?

I tried to suspend or cancel the process but i can't do it.
the system told me the error in the first post.
if i go in the history of process i have this log:
10-gen-2011 16.10.42 Application result Web service operation taskRun of interface http://test.com/test/#BPM has completed successfully Application
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user <service user>." System
10-gen-2011 16.10.42 Data object updated Data object ProcessContext has been updated Data flow
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user SAP_BPM_Service." System
10-gen-2011 16.10.42 Application launched Web service operation taskRun of interface http://test.com/test/#BPM has been called successfully Application
10-gen-2011 16.10.42 Application result Web service operation getTaskKey of interface http://test.com/test/#BPM has completed successfully Application
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user <service user>." System
10-gen-2011 16.10.42 Data object updated Data object ProcessContext has been updated Data flow
10-gen-2011 16.10.42 Current user temporarily changed to "Identity changed to user SAP_BPM_Service." System
10-gen-2011 16.10.42 Application launched Web service operation getTaskKey of interface http://test.com/test/#BPM has been called successfully Application
10-gen-2011 16.10.42 Process initiated Processo 'New Pool 0' iniziato Control flow
10-gen-2011 16.10.42 Data object created Data object TextVariables has been created Data flow
10-gen-2011 16.10.42 Data object created Data object Administrators has been created Data flow
10-gen-2011 16.10.42 Data object created Data object Auto_PotentialOwners has been created Data flow
10-gen-2011 16.10.42 Data object updated Data object ProcessContext has been updated Data flow
10-gen-2011 16.10.42 Data object updated Data object Auto_ExcludedOwners has been updated Data flow
10-gen-2011 16.10.42 Data object updated Data object ErrorHandle_PotentialOwners has been updated Data flow
10-gen-2011 16.10.42 Data object updated Data object ErrorHandle_ExcludedOwners has been updated
with no error, but for now the subprocess still in progress and it's don't finish.

Cannot quit iPhoto, get error message "burn in progress" but there is not a burn in progress

I finished burning a disc in iPhoto and tried to quit iPhoto. got error message "there is burn in progress, please stop the burn before quitting" but i have finished burning. how do i get rid of this error message and quit iPhoto?

Use the Force Quit command - it's under the Apple Menu.
Regards
TD

IChat AV progress but no cigar

I've been trying to troubleshoot the problem with iChat AV video chat for about 2 months. With the help of many posters to this forum I've made some progress and would like to share that information in the hope that someone may have additional insight.
Until my sister (East Coast USA) and I (West Coast USA) upgraded to 10.4.8 everything was fine. She on a Powerbook (PowerPC) 15 inch and me on either an eMac or Powerbook (Powerbook) 15 inch. She has Cable with approximately 1.5 - 3.0 Mbps. I have DSL with approximately 200 - 384 Kbps. We both connect through Belkin wireless 802.11g routers to our respective modems. We have the router firewalls ON and Mac OS firewalls ON by default.
For more than a year we never had to adjust any of the above settings. We just started up iChat and could videochat through AIM without any problems. After the upgrade to 10.4.8 we were able to send an invitation to begin a video chat but then the wheel spins, eventually times out, and an error message appears "There was a communication error during your chat..." Do you want to send a report to Apple? Yes or No? I don't want to be cynical here but.....I've been sending error reports for more than 2 months now....
After many weeks I finally did the not-so-easy experiment of connecting my eMac directly to my DSL modem with an ethernet cable (bypassing my wireless router). It worked! I was able to videochat with my sister without any problem even though she was still connected via wireless router. The bad news is that when I reconnected my wireless router and restarted my eMac with wireless connection I could no longer videochat with my sister.
Though not a complete solution I thought we had narrowed the scope of the problem to my wireless connection. Thanks to the helpful suggestions of many on this forum too numerous to mention by name I made the following changes which seemed to work:
1. I kept the Mac OS Firewall ON and created a new configuration with 5060, 5190, 5297, 5298, 5678, 16384-16403 open in TCP and UDP.
2. In System Preferences/Quicktime/Streaming I set Streaming speed to 256 kbps.
3. In iChat preferences/Video/bandwidth limit set to "none" and iChat Preferences//Account/Server Settings port set to 443 instead of 5190.
With these settings and my eMac connected via wireless router I was able to videochat with Defcom1 on AIM in the UK (Thank you Tony!) and I also successfully connected to the appleu3test01 and 02 sites. I do not know whether Tony and the Apple test sites are connected via wired or wireless connections.
After all of this I thought I would once again be able to videochat with my sister when I was connected to the internet via wireless router. No such luck. Once again, I got the same "communication error" when trying to initiate a videochat with her.
In one last, desperate attempt to fix the problem my sister and I reasoned that maybe it would work if we changed her TCP and UDP ports, Quicktime streaming speed, etc. as I did (see above). Unfortunately, that did not work. We keep getting the same error message. It seems that when both of us are connected via wireless router none of the previously mentioned changes seem to work. The only time we've had it work is when one of us is directly connected via ethernet to our broadband modem.
After having the benefit of wireless iChat AV for so long it is really a disappointment to have this problem. What ever happened to Plug and Play?
I hope someone from Apple is reading this. As a long time advocate and shareholder you need to know: This is not good for customer loyalty!
Meanwhile, if anyone has any additional suggestions while Apple figures out how to fix this, please let me know. Your help would be very much appreciated.

Hi Ralph,
The other end is configured exactly the same as my end; same hardware and software and configuration (I helped my sister get her computers and wireless networks installed and maintained). Only difference is that she has Cable broadband and I have DSL.
Neither of us has VoIP. I once installed Skype (don't remember exactly when but I think it was this past summer) but I've never used it. I've seen posts that Skype can cause a problem with iChat but the ports I've opened should still enable iChat AV to work even if Skype is installed. I haven't tried uninstalling Skype and I don't know if there is an uninstall application.
I checked the Belkin web site and there was a new firware update posted in September. I haven't tried installing it yet - I have a question in to Belkin to see if they know of any conflicts with 10.4.8 and if they recommend installing the firware update.
Please let me know if you have any suggestions related to Skype.
Thanks,
Geneland
Hi Geneland,
The Virtual Server is the name this device has for
Port Forwarding.
Sometimes having a listing in here and having UPnP
activated the same time can be be problem. As you
say it worked before I would not worry about this too
much.
From what you tell me it does not obviously seem to
be your end.
Can you tell me how the other end is configured ?
Also does either ISP involved offer a VoIP service ?
Or do either of you have an VoIP service or equipment
10:45 PM Thursday; November 23, 2006

ERROR: Download still in progress - not making progress

I'm adding a new clients to a new UCE server (SUNOS 10 SPARC), but the agents on the SPARC machines cannot patch themselves due to the following errors. The agents show up on the server console, but remain "disconnected" and cannot be patched. The "Download still in progress" is repeated without end. Any suggestions?
Also the "uce_agents_check_prerequisites" doesn't appear to be available any more in the downloads site. Is there an alternative?
12889:2011-08-30_17:21:48 ERROR [ default_logger: source_unavailable: #0 ] 118100992 Info: Setting Username and Password (User=<>, Pass<**>).
12889:2011-08-30_17:21:48 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:21:48 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
12889:2011-08-30_17:21:48 ERROR [ default_logger: source_unavailable: #0 ] 151070720 INFO: Using output file = /opt/SUNWuce/agent//config_files/.temp_si.12889_O8ailz .
12889:2011-08-30_17:21:48 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002///channels.xml.sig
12889:2011-08-30_17:21:50 ERROR [ default_logger: source_unavailable: #0 ] 118100992 Info: Setting Username and Password (User=<>, Pass<**>).
12889:2011-08-30_17:21:50 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:21:50 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
12889:2011-08-30_17:21:50 ERROR [ default_logger: source_unavailable: #0 ] 151070720 INFO: Using output file = /opt/SUNWuce/agent//config_files/.temp_si.12889_Q8ailz .
12889:2011-08-30_17:21:50 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002/blobs/scripts/SOLARIS_10_0_SPARC_detect.sh.sig
12889:2011-08-30_17:21:51 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:21:51 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002/config_files/SOLARIS_10_0_SPARC/agent.tgz
12889:2011-08-30_17:21:51 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
12889:2011-08-30_17:21:53 ERROR [ default_logger: source_unavailable: #0 ] 118100992 Info: Setting Username and Password (User=<>, Pass<**>).
12889:2011-08-30_17:21:53 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:21:53 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
12889:2011-08-30_17:21:53 ERROR [ default_logger: source_unavailable: #0 ] 151070720 INFO: Using output file = /opt/SUNWuce/agent//config_files/.temp_si.12889_S8ailz .
12889:2011-08-30_17:21:53 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002/config_files/SOLARIS_10_0_SPARC/agent.tgz.sig
12889:2011-08-30_17:21:54 ERROR [ default_logger: source_unavailable: #0 ] 0 ShouldGetFile /opt/SUNWuce/agent//config_files/agent.tgz return with signature differs
12889:2011-08-30_17:21:54 ERROR [ default_logger: source_unavailable: #0 ] 118100992 Info: Setting Username and Password (User=<>, Pass<**>).
12889:2011-08-30_17:21:54 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:21:54 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
12889:2011-08-30_17:21:54 ERROR [ default_logger: source_unavailable: #0 ] 151070720 INFO: Using output file = /opt/SUNWuce/agent//config_files/.temp_si.12889_T8ailz .
12889:2011-08-30_17:21:54 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002/config_files/SOLARIS_10_0_SPARC/agent.tgz
12889:2011-08-30_17:22:42 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:22:42 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002/cgi-bin/server.cgi
12889:2011-08-30_17:22:42 ERROR [ default_logger: source_unavailable: #0 ] 118100736 Info: Enabling Authentication mechanism (User=<>, Pass<**>).
12889:2011-08-30_17:22:43 ERROR [ default_logger: source_unavailable: #0 ] 151068928 INFO: Download still in progress, retrying longer (knowledgebase_conflict_reconnect_retries=360, knowledgebase_conflict_reconnect_interval=30).
12889:2011-08-30_17:22:43 ERROR [ default_logger: source_unavailable: #0 ] 151066368 INFO: Waiting 30 seconds before retrying to communicate with parent.
12889:2011-08-30_17:23:13 ERROR [ default_logger: source_unavailable: #0 ] 151069440 INFO: Enabling SSL communication.
12889:2011-08-30_17:23:13 ERROR [ default_logger: source_unavailable: #0 ] 151069184 INFO: Setting Url to download: https://dyson:8002/cgi-bin/server.cgi
Edited by: user13075976 on Aug 30, 2011 10:33 AM
Edited by: user13075976 on Aug 30, 2011 10:36 AM

Second this problem - various clients - Solaris 8 9 or 10 (all SPARC)
Only way I've been able to get around that for newly built hosts is to reboot after installation..
Very frustrating as we build a machine and then use UCE/CE to patch it - so we are leaving a relativly unpatched system on network till it can connect

In transferring data to a new Macbook Pro it seems to have stopped making progress.

In transferring data to a a new MacBook Pro from a MacBook using migration assistant, the progress seems to have stopped (for about 3 hours) and still shows 2 hours and 16 minutes remaining. The blue progress bar looks active but hasn't moved in the last 3 hours.

There might be a problem with the directory on the old Mac. Try verifying the old Mac's internal HD, per #6 in Using Disk Utility.
Another option would be to transfer from Time Machine or "bootable clone" backups of the old Mac on an external HD.
In either event, you'll want to start over. See the green box in Problems after using Migration Assistant for instructions.

I need a Rich Text Editor so I'm making one but need help.

Hi all,
I'm still figuring out the TLF and how it works so my question might seem dumb to some but any help would be great.
I'm making a RTE because I need access to a TextFlow when the user is done editing the text. It wasn't obviouse that the halo RTE could do that so I'm making my own.
The problem I'm running in to is that a user can select a range of text and apply something like italics to it. But if they don't have a range selected, say for example they just want to start off typing in italics, then how would I do that?
I've tried doing this and it works for a range but not anything else
var textfmt:TextLayoutFormat = rte.getFormatOfRange(null, rte.selectionAnchorPosition, rte.selectionActivePosition);
textfmt.fontStyle = (textfmt.fontStyle == FontPosture.ITALIC) ? FontPosture.NORMAL : FontPosture.ITALIC;
rte.setFormatOfRange(textfmt, rte.selectionAnchorPosition, rte.selectionActivePosition);
I also tried this when there wasn't a range selected and it also didn't work
var f:TextLayoutFormat = new TextLayoutFormat();
f.fontStyle = FontPosture.ITALIC;
IEditManager(rte.textFlow.interactionManager).applyContainerFormat(f);
Any help would be great.
Thanks.

Never mind, I did the following and things worked for me.
if (rte.textFlow && rte.textFlow.interactionManager is IEditManager)
           var f:TextLayoutFormat = new TextLayoutFormat();
           f.fontStyle = (italics.selected) ? FontPosture.ITALIC : FontPosture.NORMAL;
           IEditManager(rte.textFlow.interactionManager).applyFormat(f, null, f, null);
If you want to add anything or explain anything I would appreciate that.

When I try to transfer songs from itunes library to ipod touch it says sync in progress but songs are not on my ipod touch?

When I transfer music from itunes library to my ipod touch, it says sync in progress on ipod touch, however, the songs don't show up on ipod touch. I have transferred songs in the past with no problem. Not sure what is different now or what I'm doing wrong-I am very new at this and any help is greatly appreciated.

How is your iPod configured to sync music? In other words, what options and configurations do you have enabled from under your iPod's Summary and Music tabs in iTunes?
Maybe have a look at this article as well to verify your iPod is set up for syncing music.
iTunes: Syncing media content to iOS devices and iPod
B-rock

CCS - Making Progress But...

Similar Messages

Maybe you are looking for