CCSS-AWART

I am looking for Data element AWART (Attendance or Absence Type) in Structure CCSS.  I need this data to be called in a Report painter.  Can someone guide as how to create this data element and populate data in it?
Thanks,
Balaji

Hi,
Using 'Append structure' you can add fields.
Pranav

Similar Messages

  • New Characteristic in Report Painter using table CCSS

    Dear all,
    Can someone help me add characteristic "Original Business Transaction" COBK-ORGVG into a report painter report that is using table CCSS.
    Any help would be appreciated and points will be assigned.
    Kind regards to all.
    Orestis Chaitas

    I am designing the P&L report and I want to split my R&D expenses split down by Internal Orders. Since, I have not seen Internal order field in summary table of new GL..ie., FAGFLEXT  table.
    I want to know how this can be achieved in the same report in report painter.
    I am talking this issue from Report Painter point of view where each report is based on library , which is defined per summary table.(ie., Library can refer to only one table....finding it odd to believe there is no join in reporting tool).....
    Thanks and let me know if you want to know more on the issue I am facing.

  • Report painter: CCSS: will pick up statistical posting?

    Hello Gents,
    will a painter sitting on CCSS table will pick statistical postings?
    (statistical as when journal entries are made with cost element type 11, posted on cost centers)
    Thanks for your help
    KR - Loï

    HI Waman
    That is correct, the Cost Element Category 11 belongs to Revenue Posting & Value type 11 is belongs to Stastical posting in the tables.
    HI loic moisan
    Yes it wll pick the Valuatin Type 11 postings until unless you put restrictions.
    Regards
    Raj

  • Read Purchase data using Report painter with CCSS structure

    Hi
    I'm triying to set-up a simple Budget by material procedure using Rosurces defined as material and KP06 to plan Qty and Values.
    All works fine.
    Later I need to write a report for Compare Planned vaues and Effective values at material (resource) level.
    Unfortunately resource can be used only for planning, so none Effective values is available in CO.
    I thought to write a Report using Report painter and library 1VK (CCSS structure) for planned values and import from a LIS table the effective values (Ordered, Invoiced) directly from Puirchasing environment.
    Is it possible by using exit or other tools, import LIS data into a CO Report painter program ???
    Thanks in advanec for your help.
    Claudio

    Hi
    I try to specify better my need.
    I've defined using report painter a  Z report using Report Painter.
    Inside teh new Report, I can use a Customer key-figure which does'nt exist in the CCSS structure.
    Is there any solution to Read data from other SAP tables and use these info into the report.
    I'm not very frioendly with Set, Key-figures and variables, and I'd like to undestand if my needs can be solved using Report-painter.
    Thanks for your help.
    Claudio

  • Report Painter/Writer Display SKF and G/L expenses using CCSS table

    Dear Experts,
    I need to create Report painter/Writer report to display SKF and G/L expense line items for particular cost center in one report. I am using CCSS table while creating report.Please share your experiences how can i acheive the SKF and expensesd line items.I tried to create report selecting SKF and G/L account in rows with one option and another option is Cost element in one row and G/L account in column1.Both ways the i tried but system is not showing SKF details. By the way SKF is activated in CCSS table.
    Please help to look in to the abovve issue.
    Thanks & Best Regards
    Kumar

    HI,
    you can use 2 sections.
    First section the cost element as rows, values in columns (ACtual, Target deviation,...)
    2nd section the stat. key figures in rows, the quantities in columns (Actual, Plan, deviation,...)
    Best regards, Christian

  • Report Painter: How to add new(customer specific) field to CCSS table

    Dear Experts,
    We have requirement to display the orders based on Profit center or Profit center groups in report painter. So in report library(6O1), we want to add fieild PRCTR or any customer specific field(ZPRCTR) to CCSS table. Could you please let us know how to add field ?
    or is possible to add customer specific field(ZPRCTR) in CCSS and link that field to Profit Cetner(PRCTR) and profit center group.
    Please help us..
    Thanks in advance

    You can check the below OSS notes:-
    <https://service.sap.com/sap/support/notes/929889>
    <https://service.sap.com/sap/support/notes/522581>
    <https://service.sap.com/sap/support/notes/43493>
    Regards,
    Gaurav

  • Report Painter GRR1 table CCSS cost centers actual/bud by period wise

    Hi,
    I have developed Cost Center Actual/Budget Report by period for 12 months (Jan to Dec in columns) in each columan I have hardcoded period e.g. for Jan (01) Feb (02) till Dec (12-12) for one of coulmns given as variable From Period to To Period as vairbale to choose user in selection criteria (1PERIV-1PERIB). while executivng the report system is givng results for whole (12)periods in the output, even my selection criteria from period 1 to 3.
    Please advise any body how can I restrict by period wise.. e.g. if I select from period 1-3 it should show for only 3perios.
    Thanks in advance!!
    VS Rao

    Hi Kumar,
    I have done below steps to my CC Report to show by period wise(individual columns Jan, Feb, so..on) cost center report:
    Step 1: used Library 1VK, Table CCSS in GRR1.
    Step 2: Created 12 individuals columns starting from Jan to Dec..
    Step 3: Created 12 formula variables(internal Variables) for 12 periods..(becoz if I hardcoded system is deriving all the  
                 periods)..
               a) created Internal value Variable ZVAR(defaualt 01),ZAR1(default 02),ZAR2 (default 03)...this is for to create fomula
                   variables.
               b) for period 1(jan) formula variable  "IF '&ZVAR'>= 1 THEN 1 ELSE 017" internal variable table:CCSS,field:PERBL
               c) for period 2(feb) IF '&ZVA1'>= 2 THEN 2 ELSE 017 like wise created 12 variables for 12 periods
    Step 4: above the formula variables I have selected check box as variable but not coming on selection screen, I need in
                selection screen from period to period for this I have created one more hide column and given period vairable "1PERIK"
               now its coming on the selection screen but values are not populating based on by selection criteria..
    Note: If I slect 1-4 periods it should show for only Jan,Feb, Mar & April  and individually..
    Please sugget above my formula is correct or not!!  appreciate your valuable suggesion!
    Thanks
    VS Rao

  • MATNR in CCSS - Report Painter

    All,
    I would like adding new characteristic to table CCSS and use it in GRR2.
    I added field MATNR (data element MATNR) to customer include CI_CC1Z and I activated the characteristic in my report libraries. And OK I can see Material as a characteristic in GRR1/GRR2.
    But I don't know what should I do to report  basic key figures like Costs or Quantity (in period) for my group of materials.
    Now if I try to run my report I have error:
    Message no. GR410 - "Characteristic MATNR cannot be combined with key figures"
    So could You help me resolve this problem?
    Hoverer, I found something like virtual characteristic which we can create using structure CI_CC1S, table T804C, and write exit in program SAPFK21R.
    Do you know how to do it?
    Thanks for your answer,
    Patrick
    Edited by: Patryk Matysiak on Apr 9, 2008 8:56 PM

    I read this note before, but I still don't know how to write a ABAP code.
    I need information from table COEP like sum of qunatity or costs. I have this information for  Cost Elements and Orders in CCSS but I don't have for Materials.

  • Add fields to reporting table/structure CCSS

    My customer has defined some new fields (Z......) for WBS reporting in table PRPS. They would like to use these fields in report painter reports, but we have not managed to make them available in the library used (6P3). In order to make that happen they must show in the reporting table/structure used (CCSS) I guess? According to SAP there's no "easy way" of doing this, but obviously it should be possible.
    Can somebody give ma an idea how this can be done?

    Eventually we manage to get the customer defined field to show up as a characteristic in the relevant library. The reason we struggled with this was the defined length of the field. SAP does not accept a characteristic with a defined field length of more than 24 characters (we had 30). We ended up redefining the length of the field directly in include CI_CC1Z.
    Edited by: Roar Sørli on Feb 5, 2009 2:52 PM

  • LGART and AWART in CAT2  how to make it work?

    Hello All,
    Am trying to customize Standart CATS, and ihave put a defaullt AWART in TCode CAC1, and in backend in coding i try to fill the LGART field.
    BUT if both are filled, i get an error message saying that I its not possible to set both (AWART and LGART) in one entry. and if delete AWART and let only LGART, i get an Error message saying that there is no entry in Tabelle T503 for 272.
    so, do I need to cusomize something?
    i will be very happy of any kind of help.
    Thank you all

    Hi,
    I have maintained the below setting in CAC1 and CAC2 and it is working and is updating IT2010.
    CAC1
    CAC2
    In CAT2 i was able to save the data without any error.
    What i see from the information you have provided T503 error , it will come when there some groping from this table V_T503_ALL.
    Regards,
    Raja Sekhar

  • Custom fields in Report painter in CCSS table

    Hello Experts,
    I am in a processes of developing a report painter with custom fields in the selection screen.
    The custom fields are available in PRPS table.
    With hard difficulties I brought the custom fields in selection screen of the report painter.
    I have added the fields in the structure CI_CC1S
    Everything is fine. But if I enter a value in the custom field, the report is not fetching any data.
    These custom fields are related to the WBS element.
    For example if the value of the CUSTOM field is 'AAA', then I want to retrieve ony the WBS element which has 'AAA'.
    Somewhere I am missing a procedure.
    Could anyone suggest how to achieve this.
    Thanks !!!
    Best Regards,
    Vasanth M

    Any Suggestions

  • RW report on CCSS table: for some cost element key figure SWTG empty

    Dears.
    Could you kindly help to solve strange issue with report in Report Painter?
    I have 2 basic key figure in report
    SWTG - Total cost in transaction currency
    SWOG - Total cost in object currency
    In report some lines have the only SWOG figures and SWTG field empty.
    It looks strange, because all costs are posted similarly in the same transaction (via cash journal FBCJ) and they all have postings in accounting and controlling.
    Thanks in advance.
    Kind regards,
    Roman.

    I understand the reason - if there were postings in different currencies, the column "Total cost in transaction currency" is shown as undeterminable values. It's OK.
    But the problem is - if it is done even once, this "spoils" cost element and in "normal" period with one currency postings it will anyway show crosses as undeterminable values.
    How to fix it?
    Thanks,
    Regards,
    Roman.

  • Report Painter CCSS Report

    Hello Everyone!
    Is it possible to create a report showing the balances by period for Cost Element and Cost Center.  I would like to be able to show 12 periods at the same time.  Something along the lines of the diagram below.
    CE  CC         Period 1    Period 2 ... Period 12
    CE1 CC1         50.00       45.00           100.00
        CC1         100.00      110.00          200.00
    CE2 CC1         150.00      100.00          250.00
        CC2         130.00      100.00          400.00
        CC3         100.00      100.00          150.00
    Thanks!

    U can use standard transaction KSB1 for this.
    Otherwise you can develop ur own report after selecting data from COBK and COEP. ( or use the view  COVP directly). The object number of COEP refers to the Cost centers ( itsobject number format is like KLControlling areaCost center).
    Hope it helps.

  • Select-options in SELECT query - syntax error

    Hi all,
      I get the error below when I try to use the select options in a SELECT query . Please help me.
    "The IN operator with "SO_AWART" is followed neither by an internal
    table nor by a value list."
    The code i have used(Logical database  PNP is used):
    TABLES: pernr,
            catsdb.
    INCLUDE ztime_cwtr_top.    " global Data
    INCLUDE ztime_cwtr_f01.
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
    SELECT-OPTIONS SO_AWART FOR CATSDB-AWART.
    PARAMETERS P_THRES TYPE I.
    SELECTION-SCREEN END OF BLOCK B1.
    Get data from CATSDB table. Workdates within the date interval are considered.
      SELECT pernr workdate awart catsquantity beguz enduz status
      FROM catsdb
      INTO TABLE it_catsdb
      WHERE pernr  = pernr-pernr    AND
           workdate GE pn-begda     AND
           workdate LE pn-endda     AND
           status   IN ('20', '30') AND
           awart    IN  so_awart .
          awart    IN ('1100', '1137', '1138', '1139', '1140',
                      '1147', '1148', '1149', '1157', '2003' ).
    when I give the values directly i do not get any syntax error, but when I use select options in the where condition I get the syntax error.
    I have tried different options like using only the select-options in the where condition.
    Thanks in advance.....
    Madhu

    Solved.
    Code with syntax error:
    include z...top .
    include z...fo1.
    select-options: xxxxxxx
    Code  with no syntax error:
    select-options: xxxxxxx
    include z...top .
    include z...fo1.
    Thanks for all your help,
    Madhu

  • Table used in report painter

    Hi,
    How to check what table is really used in a certain report painter.
    For my case, I want to a report 1KSL-001 under 1VK library, and I can see this 1VK library is using table "CCSS", but CCSS acctually is not a table, its just a structure.
    So, how to use what tables are used while running report 1KSL-001?
    Thanks.
    Cheers,
    Bernard Gunawan

    Yes, but how do you know and where to check that this report is a collection of fields of those tables?
    Could you please tell me what transaction code to check, and guide to what table behind a report painter?
    Bernard

Maybe you are looking for