CCX 4.5 to 9.0 upgrade SKU question

Our customer wants to upgrade his Cisco IP phone system to version 9.1.
Now they are using CallManager version 5.1 and CCX version 4.5.
CallManger upgrade is clear to me but the CCX is not.
I have read in Cisco Unified Contact Center Express Upgrade Guide:
"If you are running any other earlier releases of Cisco Unified IP IVR, such as 4.0(5) or 4.5, consider upgrading your system to Unified CCX 7.0(2)ES03 and then use this document to upgrade to Unified CCX 9.0(x) using the Windows to Linux upgrade."
So upgrading CCX from version 4.5 to 9.0 is possible.
But when I configure "L-CCX-90-UPG-LIC" in CCW I could set "CCX 9.0 UPGRADE - 7.0 to 9.0" only.
I cannot find "CCX 4.0 UPGRADE - 4.0 to 9.0" or something.
Which SKU I have to buy in order to upgrade CCX version 4.5 to 9.0?
Thanks in advance,
Laszlo

Gergely brings up a good point. The decision needs to be based on how badly you want to keep the historical reporting data. If this isn't important to you then I would agree: you can save yourself a lot of time by just building a new 9.x install and manually migrating the configuration over.
Note that the Windows to Linux migration tool from 7.0 to 9.0 only carries forward roughly the most recent ~1.5GB of the database records so you'll experience some data loss even during an upgrade.
Please remember to rate helpful responses and identify helpful or correct answers.

Similar Messages

Contact Center Upgrade SKU

Hello \,
My customer wants to upgrade from Cisco Contact Center Express Upgrade License ver 7.x to ver 10.X .
Please what is the sku (Top level Part number) to get this, and also what and what do I look for in getting this?
Regards,

Not very familiar with the information you need, but try here: cisco unified contact center http://www.cisco-servicefinder.com/

WLSE - WCS upgrade license question

Hello,
We need to upgrade our WLSE to WCS but our sales people bought the wrong license (WCS-Standard-K9) Is it possible to upgrade the WLSE to WCS with this license and just get the conversion CDs needed from you ?

Hi Gudmundur,
This will not work, plus you have probably paid more that is necessary as the Upgrade Licenses are le$$ to encourage this migration. You should,as noted by Dennis contact your SE or;
[email protected]
Converting Existing CiscoWorks WLSE to Cisco WCS Licenses
CiscoWorks WLSE (Models 1130-19 or 1133) can be converted into a server that runs Cisco WCS. This allows customers of CiscoWorks WLSE to migrate to the Cisco Unified Wireless Network architecture using their existing CiscoWorks WLSE platform. CiscoWorks WLSE conversion SKUs are price-adjusted to make transitioning from CiscoWorks WLSE to Cisco WCS cost-effective.
Once converted, a CiscoWorks WLSE is no longer a self-contained appliance; it becomes a server that runs Cisco WCS software using RedHat Linux ES v. 4.0. The converted CiscoWorks WLSE operates as a brand new Cisco WCS installation and supports only lightweight access points and wireless LAN controllers that are running Lightweight Access Point Protocol (LWAPP). Stand-Alone (autonomous) access points are not supported by a converted CiscoWorks WLSE.
All WCS-WLSE-UPG-K9 SKUs ship with two special conversion CDs. These CDs will check to make sure that a CiscoWorks WLSE is installed prior to beginning the Cisco WCS conversion process. The conversion software will not install if the CiscoWorks WLSE software check, performed by the conversion software, does not pass.
Note: Please take note of the following special considerations for CiscoWorks WLSE conversions.
CiscoWorks WLSE Express (Model 1030) and CiscoWorks WLSE (Models 1105) are not supported with this SKU. Do not install the CiscoWorks WLSE CDs on to the CiscoWorks WLSE Express (Model 1030) appliance or CiscoWorks WLSE (Model 1105). This conversion is not supported and will not work.
A CiscoWorks WLSE that has been converted to Cisco WCS cannot be reverted back to operate as a CiscoWorks WLSE.
To find the model number of a CiscoWorks WLSE, look at the compliance label on the bottom of the chassis front bezel. Only CiscoWorks WLSE with a compliance label that says 1130-19 or 1133 can be converted to Cisco WCS.
Please see Appendix C for information about receiving support for existing SMARTnetÂ® (hardware support) contracts for CiscoWorks WLSE.
Customers that are migrating their existing CiscoWorks WLSE to operate as a Cisco WCS server should select from the WCS-WLSE-UPG-K9 SKU family and then select one of the sub-SKU options based on the following:
Base or Location
Access point quantity. (The CiscoWorks WLSE conversion CD's do not automatically provide support for a set number of access points or location services. The number of lightweight access points supported as well as Cisco WCS location is selected by the customer based on the WCS-WLSE-UPG-K9 family sub-SKU. Customers can select the sub-SKU that contains the access point count and Cisco WCS option that they wish to support.)
A Cisco Ordering Tool sample for WCS-WLSE-UPG-K9 is displayed in Link.
PAK Certificate, Instructions and CD
Customers that purchase the SKU family WCS-WLSE-UPG-K9 will automatically receive, by U.S. mail, two special CDs containing the CiscoWorks WLSE to Cisco WCS conversion software, as well as the PAK certificate, instructions on how to register the PAK and links to Cisco WCS manuals and release notes. CiscoWorks WLSE conversion software cannot be downloaded.
http://www.cisco.com/en/US/products/ps6305/products_data_sheet0900aecd804b4646.html
Hope this helps!
Hi Gudmundur,
This will not work, plus you have probably paid more that is necessary as the Upgrade Licenses are le$$ to encourage this migration. You should,as noted by Dennis contact your SE or;
[email protected]
Converting Existing CiscoWorks WLSE to Cisco WCS Licenses
CiscoWorks WLSE (Models 1130-19 or 1133) can be converted into a server that runs Cisco WCS. This allows customers of CiscoWorks WLSE to migrate to the Cisco Unified Wireless Network architecture using their existing CiscoWorks WLSE platform. CiscoWorks WLSE conversion SKUs are price-adjusted to make transitioning from CiscoWorks WLSE to Cisco WCS cost-effective.
Once converted, a CiscoWorks WLSE is no longer a self-contained appliance; it becomes a server that runs Cisco WCS software using RedHat Linux ES v. 4.0. The converted CiscoWorks WLSE operates as a brand new Cisco WCS installation and supports only lightweight access points and wireless LAN controllers that are running Lightweight Access Point Protocol (LWAPP). Stand-Alone (autonomous) access points are not supported by a converted CiscoWorks WLSE.
All WCS-WLSE-UPG-K9 SKUs ship with two special conversion CDs. These CDs will check to make sure that a CiscoWorks WLSE is installed prior to beginning the Cisco WCS conversion process. The conversion software will not install if the CiscoWorks WLSE software check, performed by the conversion software, does not pass.
Note: Please take note of the following special considerations for CiscoWorks WLSE conversions.
CiscoWorks WLSE Express (Model 1030) and CiscoWorks WLSE (Models 1105) are not supported with this SKU. Do not install the CiscoWorks WLSE CDs on to the CiscoWorks WLSE Express (Model 1030) appliance or CiscoWorks WLSE (Model 1105). This conversion is not supported and will not work.
A CiscoWorks WLSE that has been converted to Cisco WCS cannot be reverted back to operate as a CiscoWorks WLSE.
To find the model number of a CiscoWorks WLSE, look at the compliance label on the bottom of the chassis front bezel. Only CiscoWorks WLSE with a compliance label that says 1130-19 or 1133 can be converted to Cisco WCS.
Please see Appendix C for information about receiving support for existing SMARTnetÂ® (hardware support) contracts for CiscoWorks WLSE.
Customers that are migrating their existing CiscoWorks WLSE to operate as a Cisco WCS server should select from the WCS-WLSE-UPG-K9 SKU family and then select one of the sub-SKU options based on the following:
Base or Location
Access point quantity. (The CiscoWorks WLSE conversion CD's do not automatically provide support for a set number of access points or location services. The number of lightweight access points supported as well as Cisco WCS location is selected by the customer based on the WCS-WLSE-UPG-K9 family sub-SKU. Customers can select the sub-SKU that contains the access point count and Cisco WCS option that they wish to support.)
A Cisco Ordering Tool sample for WCS-WLSE-UPG-K9 is displayed in Link.
PAK Certificate, Instructions and CD
Customers that purchase the SKU family WCS-WLSE-UPG-K9 will automatically receive, by U.S. mail, two special CDs containing the CiscoWorks WLSE to Cisco WCS conversion software, as well as the PAK certificate, instructions on how to register the PAK and links to Cisco WCS manuals and release notes. CiscoWorks WLSE conversion software cannot be downloaded.
http://www.cisco.com/en/US/products/ps6305/products_data_sheet0900aecd804b4646.html
Hope this helps!

IPhoto '08 to iPhoto '11 Upgrade PROBLEM & Questions

Despite all the negative reviews at the App Store about iPhoto '11, I decided upgrade from iPhoto '08 so I could conveniently upload photos to FaceBook from iPhoto. (The FaceBook Uploader for iPhoto never worked for me.) I thought the ratio of negative reviews were unbalanced because people who are satisfied with the product have less motivation to write a review. Maybe I was wrong.
My problem:
I only bought iPhoto '11, not the iLife package, from the App Store. When I first opened iPhoto '11, I was warned that my library would no longer be readable by earlier iPhoto versions. No problem, I expected that. As I had somewhat over 15,000 photos in my iPhoto '08 Library, I was also notified that that it would take an hour or longer to rewrite the library. No problem, I expected that too. iPhoto first read my old library, then started rewriting. When the rewriting progress bar was just past halfway, iPhoto '11 suddenly quit and sent an "iPhoto Problem Report" to Apple. This has happened about 5 times now, both before and after restarting my computer. It might seem related to free disk space, but I just put in a new 750Gb hard drive with over 400Gb free. All my other specs also meet or exceed iLife's requirements.
My Questions:
1. Can anyone suggest what they think the problem is and how to proceed? I couldn't find a similar problem in the Apple Support Community.
2. If I can't upgrade, how do I go back to iPhoto '08? I backed up everything to an external drive using Time Machine before trying to upgrade. I know there's a iPhoto Library file in Pictures but there's also another file somewhere that contains the data for titles, events, comments and edits. How do I find it and how do I restore them to my MacBook?
3. Can I get my $14.95 back from Apple? I don't see a way to talk to Apple without costing me more than the $14.95
Any help will be GREATLY APPRECIATED!

What's happening is that some file (or files) in the Library are damaged in some wy and that's tripping up the upgrade. This file (or files) may not necessarily be photos but could be one of the background database files. Unfortunately there's not any real way of knowing.
Any time you upgrade or update an app or the OS you run the risk of exposing a problem that has bee hidden heretofore. That's why you make back ups.
Possible solution: Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Reverting means restoring your Librry from Time Machine and re-installing 08. It's not a big thing to do.
Contact App Store support about a refund. There's an email link on the right hand side of the app store window.

MacBook Pro hard disk upgrade shows question mark folder

I recently bought a 1TB hard disk for my teenaged daughter's MacBook Pro.
I formatted it, used Carbon Copy Cloner to clone the existing drive. I even made sure to create the recovery partition.
I restarted while holding the option key and chose the new drive. It booted fine so I checked in System Preferences to make sure it was selected as the boot device.
I opened the case and swapped the drives. Put it back together and restarted only to see the question mark folder!
I tried booting while holding the option key and now I get the choose a network prompt.
I am desperate and hate the thought of disappointing my daughter. It used to be that I was her hero who could fix anything now I'm the guy who asks too many questions and doesn't put enough money on her debit card. Granted she busts her butt getting awesome grades and I was upgrading her drive so she could continue her video yearbook for her school. So I shouldn't complain but it would be great to be her hero again.
BTW, I am not a newbie to the tech world but I don't do nearly as much in the Apple arena as I do in the PC world. Then again I've been a senior tech in the industry sine before IBM had a PC. In fact, my first real work was on a 6502 processor that used the same machine code as the Rage of the day, the Apple ][. All that to say I usually can find my way around a problem but this one has me stumped.
I appreciate any assistance offered.
Thanks,
Thom

I tried to reboot with the option, command P. And R keys pressed. I heard the ding several times it still showed the question mark! I also tried the shift option and it only displayed the network selection. Also I tried to press C so I could boot from USB and it didn't work either.
If I cannot get this to work I fear my only other choice is to use a FireWire enclosure. This isn't a good option as my daughter does mostly movie work and iMovie has this terrible "feature" that forces all movies to be stored in one place. It sure would be handy if it allowed movie projects to set the storage location individually. I suppose I could simply move all the movies to the drive and try to find a way to point all iMovie projects to the external drive.
Unfortunately, my daughter is one of those Mac users who isn't savvy enough to use anything but the default settings. Heck I've tried to explain to her that she ought to get rid of the big files once she has done her work. That's why her drive is always full.

Logic Pro 7.2 Upgrade issue/question

Hi,
We have been a Logic Platinum user since version 4, upgrading through 5 and now to 7.2 Pro However, I have come to an issue and wondered if anyone can please help me resolve.
As I have just upgraded our platform to a Dual PPC 2.7mhz running OS/X 10.4.9, I am unable to install my original full version of logic 5 Platinum, so I can install the upgrade to 7.2
It seems my original installation disk for version 5 will not mount under OS/X, giving a system permissions error or stating no system folder available. All was fine on our old platforms under OS 9 (which we no longer own). I left the OS9 discs with the old G4s, thus I cannot load a classic OS9 environment to attempt this way either.
At the time when Apple bought out emagic, I downloaded a cross platform 5.5.0 version which was supposed to also include an OSX version but now going back to the disk i burned, it seems there is only an .exe file, which is a PC only version, no OSX file in sight.
So.... can you please advise our best route to get our original version of logic platinum 5 installed under OSX so we can install the 7.2 update or point us in the direction of the download for the 5.5.0.dmg file for OSX, which would be even better.
A little frustrated at present, as if we hadn't of skipped Version 6, this would now not be an issue. However, what's done is done and version 5 served us well until it really not being capable of what we require, thus the 7.2 upgrade.
PS, We didn't chose to upgrade to Logic 8 Studio on the basis we didn;t need half the apps' included (e.g. Stage for live performance) and also, we thought 7.2 would be slightly less resource hungry. We chose to upgrade to Dual PPC, due to the fact we use M-Audio Delta 1010s and these are not compatible with the PCI-e slots in the Intel Dual core Pros.
If you need any information, please reply and request whatever is necessary to resolve this.
I look forward to hearing back from anyone with some information to relieve our stress, as the studio is currently non functional. As we are only a small family business, any missed custom is traumatic.
Many thanks in advance,
Deecee3112

Hiya,thanks for the reply. I've actually resolved it. The upgrade package to 7.2 didn't need the install of version 5 to be in place at all, just the authorised XSkey.
So the 7.2 upgrade package was actually the full install less the XSkey.
I feel a bit silly now, thinking about it, why would the core audio code from version 5 be used at all in the installation of version 7! ho hum, we learn something everyday.
cheers for the reply anyway, I'm happy at the outcome and can work again.

UPGRADE ASSISTANT QUESTIONS for ECC6.0???????911

I have used upgrade assistant in the past for 4.6C and 4.7 upgrades and had no problems. I am having trouble getting the assistant to work through the internet browers. I need help with a couple of questions:
First: Do I need do a prepare and SERVER option like I had in the past with R3UP?
Second: Is there anything special that needs to be done for ports 4239,4240,4241. I can reach my server through the internet of some of the ports that R3 uses.
It seems the java is not recognizing my i5 server and I am not sure where the disconnect is.
This is the error I am receiving when I try to start the upgrade assistant:
ERROR: Unable to load resource: http://sapdev:4239/ua/uagui.jnlp

<?xml version="1.0" encoding="utf-8"?>
<jnlp spec="0.2 1.0" codebase="http://SAPDEV.SWIRECC.COM:4239/ua" href="uagui.jnlp">
<information>
    <title>Upgrade Assistant</title>
    <vendor>SAP AG</vendor>
    <description kind="short">SAP Upgrade Assistant</description>
    <icon href="http://SAPDEV.SWIRECC.COM:4239/ua/pics/sdtgui_big.gif"/>
</information>
<security>
    <all-permissions/>
</security>
<resources>
    <j2se version="1.4+"/>
    <jar href="uagui.jar" main="true" download="eager"/>
</resources>
<application-desc main-class="UaGui">
     <argument>-host</argument>
     <argument>SAPDEV.SWIRECC.COM</argument>
     <argument>-port</argument>
     <argument>4241</argument>
</application-desc>
</jnlp>

Usually it's done like
- PREPARE
- exchange SAPup with the newest version
- add your application fix <application>_FIX to /usr/sap/put
- $JAVA_HOME/bin/java -cp /usr/sap/put/ua/ua.jar UaServer
- give an administrator password
After that the UA should listen on port 4239
You can verify that on the machine via
netstat -tn | grep -i LISTEN | grep 4239
Also check that you have either no proxy or add the box' name to the exception list of the browser (because Java uses that exception list too).
Markus

ISE 1.2 to 1.3 upgrade clarification question

I am looking to upgrade from ISE version 1.2 to version 1. 3 and am reading through the upgrade guide. The basic steps they outline are to create a repository pointing to disk: and then run the application upgrade prepare using the new repository. They say the prepare should copy the file to the local repository and list the MD5 and SHA256 checksum.
Do I not need to "copy" the file to the server before the prepare or is there a different format for specifying the file on the prepare step? It seems this is looking for a local copy instead on on my FTP server but any format I use to try to specify my FTP server is not working.
The documentation simply gives application upgrade prepare {filename} {repository}.
Brent

Hi Brent,
To prepare upgrade you need to get the support bundle on the local disk.
conf t
repository local
url disk:/
exit
exit
copy ftp://<repository_url>/ ise-upgradebundle-1.2.x-to-1.3.0.###.x86_64.tar.gz disk:/
To upgrade using this file, use the following command:
application upgrade ise-upgradebundle-1.2.x-to-1.3.0.###.x86_64.tar.gz local
You can use prepare to put the file in local repository that you created and then use proceed to upgrade.
Also, visit this link for upgrade details:
https://supportforums.cisco.com/blog/12341806/upgrading-identity-services-engine-ise-13
Regards,
Kanwal
Note: Please mark answers if they are helpful.

10.1.0.4 upgrade documentation question

Hi:
In the accompanying documentation (section 5.1.7) it says, "If any database uses Java Virtual Machine or Oracle interMedia, then install the Oracle Database 10g Products installation type from the ... Companion CD before installing the 10.1.0.4 patch".
What does that mean? What is the "installation type"? I assume since I already have the interMedia stuff running on a 10.x.x. database I have already loaded whatever I need from the companion CD. Is this saying to do any upgrades from the 10.1.0.4 companion CD section before applying the database patches or what?
Thanks.
MJG

Here's what I did. (Windows XP server)
* Installed Oracle 10.1.0.2
* Installed 10.1.0.2. Companion CD
* Installed "10g Products" from the 10.1.0.2 companion CD
* Installed 10.1.0.4 DB patch
* Installed 10.1.0.4 Companion CD patch.
Now I am in the "post processing" phase, trying to do a
STARTUP UPGRADE
but I get an error "SP2-0714: invalid combination of STARTUP options"
Does anyone know what's behind this? Did I need to run the catpatch.sql before installing the companion CD parts of the 10.1.0.4 patch?

LR3 to LR5 upgrade, import questions

I upgraded from LR3 to LR5 and ona separate computer, copied all my images onto a separate new external and now want to upload to 5, but not all my images. Can I organize on my Lacie and them import them with complications?

Do you want complications? If you take the time to organize your images before you import them into Lightroom it will make life much simpler. I suggest using one master folder with a logical (for you) subfolder structure.

IPhone Upgrade Eligibility Question

My old iPhone 3G has finally died (a collision accident that popped the screen and forced it into white screen mode. I have no way of fixing this, and if there is a solution involving the home and sleep buttons, I have no luck because the latter button is in disrepair.
I lived with a phone with broken pixels and the aforementioned broken skeep button so that I would be able to save my At&T upgrade for the next iPhone. I require a phone now though. Would I lose my upgrade offer if I were to replace my phone temporarily with a free iPhone 3GS? It is extremely important that I know as soon as possible.
I'm looking forward to responses.
Thank you.

All right, thank you. It looks like that all of my data is safe at the moment. It's in dormancy of course.
It looks like there's no way for me to wait for the iPhone 5 then, after all of this time waiting. I find it rather unfortunately that I can't get a temporary replacement somehow.
Anyway, how do I back-up the back-up so I don't accidentally overwrite it with something else?

Upgrading OS questions

I need to upgrade my MacBook Pro's OS from 10.5.8 to be able to sync with my iPhone. My questions are:
1) How far up do I need to go? I do have the CD for Snow Leopard, will this be enough to get the most recent update of iTunes? (haven't installed Snow Leopard yet)
2) I'm using Microsoft Office 2008 (Word only) 12.1.0 and have read that it must be updated also. Can I update straight from 12.1.0 to the most recent 2008 update, which appears to be 12.3.6?
I guess those are my main questions. All I really need/want to do is to be able to sync my iPhone again. I would appreciate any comments, suggestions, advice on this. Thanks!

1, 10.6.8
To upgrade to Snow Leopard 10.6, you must purchase the Snow Leopard install DVD from Apple.
Backup first.
2, Ask Microsoft, since it is their product
Allan

P67A GD55 Rev B - Upgrade Bios Question

To be honest, this post supposed to be a private message to Svet, but turned out a newbie like me who just joining the forum is not allowed to send PM...so apology if this questions are being asked so many times already:
Dear svet,
Really need your help in clarifying something, to make it short here are my questions:
First here are my PC Specifications:
MSI P67A-GD55 rev B
Corsair Vengeance 2x4GB XMP Enabled
PSU Corsair X750W
Intel Sandy Bridge i5 2500k
OS Windows 7 x64
1. I have upgraded my GD55 rev B bios to the latest bios available here: msi.com/product/mb/P67A-GD55--B3-.html#/?div=BIOS
which foolishy I didn't read the warn that it will not work proeperly for Sandy Bridge
2. The bios update/flash was a success, now I have the ver II click bios, completely different with the first version. With this bios I managed to OC to my previous OC speed (4.2GHz in OC Setting by changing it into 42 multiplier and set the Vcore to 1.35)
3. The reason that I updated my bios in the first time was I often experience 0x50 error while gaming certain games, and I thought upgrading bios is one of the solutions for it (after trying to change my RAM, changing my GPU, and my PSU to no avail)
4. Then I stumble to this post of yours: https://forum-en.msi.com/index.php?topic=164135.0
with some fix in the 434 version states like this: "05.Fix system reset on 0x55 issue when use Sandy Bridge G440 CPU and install two 4G memory."
I am completely not sure whether this is related to my 0x50 BSOD or not, but really hoping that it is.
So my question is, should I upgrade/downgrade to your first post BIOS? (E7681IMS.434) or should I upgrade/downgrade to the latest beta 439 Bios (E7681IMSv439.rar) as the fix in 434 are included in 439?)
Thank you so much in advance for any help...
Regards,

Quote from: Froggy Gremlin on 09-April-13, 15:26:46
While waiting for Svet to respond, I will tell you that BSOD 050 is not enough DRAM V. being applied. It's rather a shame you didn't open a thread in the regular part of the forum, or the OC section of the forum asking for assistance 'before' flashing an Ivy support UEFI/BIOS.
That CPU is most likely capable of OC'ing to 42X easily on Auto CPU voltage while maintaining all the power saving features. VDroop set to Low or 100% depending on the available settings.
What is X.M.P. setting the DRAM V. at? If 1.50v's, to solve your BSOD, probably would have just required raising the DRAM V. to about 1.575v's or maybe even less manually. Rather than using X.M.P., the DRAM Frequency setting could have been changed manually to 1600.
Yes, all newer final or Beta versions will have previous release improvements incorporated.
Thank you for the reply...forget to delete the "dear Svet" part as it was copied from once private message intended
To be honest, I see myself rather as a silent reader than an active poster...so I would really try to avoid posting due to English isn't my first language....if that even make sense...
I think I have read quite a lot of 0x50 BSOD (CTD errors to be exact) in other forums to...have tried what people had posted as solutions for them...and still to no avail, hence my foolish and rushed attempt in flashing the bios...please do mind that the current bios is quite stable in my opinion, despite the same BSOD (CTD) in the certain game I have mentioned in my first post...
I have followed OC guide and benchmark in other forum which show each of its poster their OC settings and result (specifically i5 2500k series), and I have tried around 1 week to safely say that my unfortunate chip can only handly a stable 24/7 4.2GHz in that volt...i'm so lucky
and for XMP volt, I have no idea to be honest, I just enable it in the bios, will really look at it later on...
tl'dr thank you so much for the new insight of how to solve the 0x50! really appreciate it....If i can remember correctly, I have tried to use the default DRAM setting (without using XMP enabled) and still got the 0x50 CTD....but trying your suggestion is still a worth a try...will try this when I get home...thank you!

Photoshop CS6 upgrade - installation question

So, 2 months ago I got a new notebook. I installed CS4 and made sure I got everything working perfectly. Then, this month I installed the CS6 trial and boy it has a crapload of permission-related temp file directory blunders. To narrow it down to just CS6, I uninstalled and reinstalled all Adobe related software on my machine except for CS4. After 10-12 hours of configuration trial and error with the temp-file blunder, I have CS6 working perfectly as well. So now I have a trial version of CS6 with a leftover CS4 key on the computer.
Now for my question: Will the trial accept a CS6 upgrade key or will I have to reinstall using the CS6 upgrade disc? I'd really prefer not to uninstall CS6 again.

Yes, you can just input your serial number in the trial version.

XI3.0 simple upgrade - Few questions

Hi Gurus,
I ran into some issues with my upgrade to XI3.0 from XIR2 SP4. I was using a simple upgrade method.
1- It seemed like the upgrade was going fine throughout. I stopped all the services before upgrade (including Tomcat). When prompted for tomcat5.5 ports, I used the default values though the XIR2 tomcat uses those ports. I thought it should not be a problem because XIR2 tomcat is stopped anyways. After the install, I noticed that the cmc and infoView folders in tomcat55/work/catlina/localhost were missing. Needless to say that CMC and InfoView did not work.
2- I thought I'll uninstall and use different ports, but the uninstall did not work. i tried both through the media and through Add/Remove programs. The media uninstall gave a 'Fatal Error' in the end and the Add/Remove program errored immediately saying 'Error applying Transforms......'
Questions:
1- I'd like someone to first please confirm that what I noticed after the install was because I used the same port numbers.
2- How can I make the uninstall to work?
3- Since the upgrade process migrated the repository, can I uninstall XIR3 and 3.0, perform a new 3.0 installtion that uses the (migrated) repository?
Thanks,
Kashif

Hi,
Addition to the above
go for 7.11 (i.e ehp1 of 7.1) ..as it have other features to use..
especially proxy feature in AAE (using XI protocol in SOAP) and also Idoc packaging which will be veryful ..
for compatible side 7.1 onwards we have pattern in service interface(message interface) with XI 3.0 stateless..
Gud luck
Rajesh

CCX 4.5 to 9.0 upgrade SKU question

Similar Messages

Maybe you are looking for