CCX 5.0(2) SR2 to SR3 upgrade issue

Good day.I'm going to upgrade our ccx 5.0(2) from SR2 to SR3.
As i found out in manual,before upgrade,i should copy wfavvid folder to another location.
But there's no any step what i need to do with this directory then.
My question: after upgrade,is there need to replace updated folder with backed up one?
Or this folder need to be copied only if upgrade was unsuccessfull?
Thanks.

Hi,
I think the copy of wfavvid is simply a safeguard in case you have problems with the upgrade. You do not want to copy that directory back after the upgrade otherwise. Just copy it to another location for safeguard and run the upgrade. Restart when prompted and you should be good to go. If all is well after testing you can get rid of the copied wfavvid directory.
Thanks,
Mike

Similar Messages

SAP ECC6 sr3 upgrade error in executing MSSCONCHECK.SQL script

Hello all,
I am facing this error which is very annoying , I am executing Prepare Upgrade script for ECC6 SR3 from SAP 4.7 Sr2 with windows 2003 server and MSSQL 2005 server as backend. I am facing below error
Enter one of these options [continue] := continue
      SAPup message
SAPup> SQL-scripts must be executed by the NT user account T47VMHOST2\t47adm.
       Check your installation of the integrated security procedure
       on host t47vmhost2 and make sure that a login for the NT user
       T47VMHOST2\t47adm exists with the following rules:
       - user T47VMHOST2\t47adm owns the role System Administrators
       - user T47VMHOST2\t47adm has the default database T47
SAPup> Integrated security installed correctly?
            - "no"
            - "yes"
Enter one of these options [no] := yes
Executing script MSSCONCHECK ...
MSSCONCHECK: Connection check failed for the user specified
      SAPup message
SAPup> Errors were found in the logfile MSSCONCHECK.LOG
       after execution of the script MSSCONCHECK.SQL.
SAPup> SAPup cannot proceed until these errors are fixed.
       Please, examine MSSCONCHECK.LOG, fix reported errors and then call R3UP a
gain
I have done a number of changes in system i checked the SIDadm user is assigned a default DB T47 and has said role assigned allready.
I restarted the system after changes and started the prepare batch file again but with sme probelm again. so can anybody guide me on this. I seen a number of threads but there is no any concrete solution providedby them.
will really appreciate any reply.
Mani

Hello Julia,
i read those note but everything seems normal to me on my PC; it has remote access enabled, t47vmhost2/t47adm is the user configured (although its not a domain configuration (installation) but t47vmhost2 is the computer name. So its kind of local user defined in SQL with said authorization. below is the log from file MSSCONCHECK.LOG
[SQL Native Client]Named Pipes Provider: Could not open a connection to SQL Server [2].
[SQL Native Client]Login timeout expired
[SQL Native Client]An error has occurred while establishing a connection to the server. When
connecting to SQL Server 2005, this failure may be caused by the fact that under the default
settings SQL Server does not allow remote connections.
I am still stuck in ?
Can you please verify if i am using right DVDs
51033495_1     NW 7.0 SR3 Languages DE,EN,ES,FR,IT,NL
51033494_3     NW 7.0 SR3 Upgrade Export 3 of 3
51033494_2     NW 7.0 SR3 Upgrade Export 2 of 3
51033494_1     NW 7.0 SR3 Upgrade Export 1 of 3
51033512_14     NW 7.0 SR3 Upgrade Master Windows Server on x64 64bit
51033508_8     NW 7.0 SR3 Kernel 7.00 Windows Server on x64 64bit Upg ABAP
Pleas help
Mani

Upgrade issues OBIEE 10g to 11g along with OBIA upgrade

Hi,
I have to upgrade OBIEE 10.1.3.4.1 to OBIEE 11.1.1.5 along with OBIA 7.9.6.1 to 7.9.6.5(Informatica 8.6.1 to 9.0.1) at my client location and I have very little knowledge on it. and want to know/have help documents for upgrade.
And if anyone in the forums involved in upgrade please list the errors/issues occured during upgrade and after upgrade.
1. OBIEE 10g to 11g upgrade issues??
2. OBIA OBIA 7.9.6.1 to 7.9.6.5 upgrade issues along with 10g to 11g??
3. Informatica 8.6.1 to 9.0.1 upgrade issues??
4. DAC upgrade issues??
any response for my questions is appreciated.
Thanks
Jay.
Edited by: Jay on Apr 11, 2012 9:11 AM

HI Jay,
We cannot explained thread list here, If you get any errors plz post me,will try to help out.
This is oracle document link - This document has given step by step with screen shots upgration for 10g to 11g ,Please refer the below link.
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/bi/bi11115/upgrade/upgrade_to_11g.htm
http://obieemanu.blogspot.in/2011/05/rpd-upgration-from-10g-to-11g.html
http://docs.oracle.com/cd/E21764_01/upgrade.1111/e10125/ua_command_line.htm#ASMAS149
Award points it is useful.
Thanks,
satya

Report generation toolkit upgrade issues

I have created multiple vi's in that utilize the previous report generation toolkits specifically using the Generate Report Get Data to Modify.vi and the Generate Report Set Modified Data.vi. Obviously the report reference has now changed in 8.6's version of the report generation toolkit and these vi's do not exist in the 8.6 library anymore. What vi's do I need to replace these functions with to make this code work. Can anyone tell me what the work around is to solving this problem. This is a picture of the code.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor
Attachments:
code.JPG ‏92 KB

Hi BJD1613,
The Report Generation VIs on the LabVIEW Palettes mutate properly. However, you may run into upgrade issues if VIs distributed with LabVIEW, but not available in the Palettes are used in the code. Hence, I would caution against using them for the same reason.
In this case, the specific references do exist in the report generation classes; however, since they are private, they cannot be accessed by VIs outside the respective classes. A temporary workaround for now is mentioned in the following KB 4OOCSJ4M Getting References in Report Generation Toolkit 1.1.3 with LabVIEW 8.6.
This was reported to R&D (CAR# 123064) for further investigation

EHP Upgrade Issue - Java Stack

Hi,
Our Source System at NW 7.0 SP13 and we are upgrading the system to EHP1 SP03.
Upgrade failed at Downtime > DEPLOY_ONLINE_DEPL phase.
Error log:
Sep 9, 2009 10:11:51 PM [Error]:                       com.sap.sdt.ucp.phases.AbstractPhaseType.doExecute(AbstractPhaseType.java:863) [Thread[main,5,main]]: Exception has occurred during the execution of the phase.
Sep 9, 2009 10:11:51 PM [Error]:             com.sap.sdt.jspm.unattended.RequestController.addContextInfo(RequestController.java:178) [Thread[main,5,main]]: Deployment of queue sapjup-queue completed with error
JSPM version is 7.01.3.0.15. Current JSPM log directory is /usr/sap/XPD/JC00/j2ee/JSPM/log/log_2009_09_09_16_09_42.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.SAPJupJSPMRapiAdapter.createAndLogRapiException(SAPJupJSPMRapiAdapter.java:698) [Thread[main,5,main]]: The deployment of the queue failed.
Sep 9, 2009 10:11:51 PM [Error]: com.sap.sdt.sapjup.tools.sapjupjspm.deploy.SAPJupJSPMDeployer.deployList(SAPJupJSPMDeployer.java:68) [Thread[main,5,main]]: Could not execute deployment of stack file /usr/sap/trans/EPS/in/XPD.xml.
Sep 9, 2009 10:11:51 PM [Error]:      com.sap.sdt.j2ee.phases.PhaseTypeDeploymentManager.execute(PhaseTypeDeploymentManager.java:519) [Thread[main,5,main]]: Error while executing DeploymentManager phase with action deploySlot. Check the log files for the specified action.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:906) [Thread[main,5,main]]: Phase UPGRADE/DEPLOYMENT_BASED_UPGRADE/DEPLOY_ONLINE_DEPL has been completed.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:907) [Thread[main,5,main]]: Start time: 2009/09/09 22:09:42.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:909) [Thread[main,5,main]]: End time: 2009/09/09 22:11:51.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:910) [Thread[main,5,main]]: Duration: 0:02:08.248.
Sep 9, 2009 10:11:51 PM [Info]:                         com.sap.sdt.ucp.phases.AbstractPhaseType.cleanup(AbstractPhaseType.java:911) [Thread[main,5,main]]: Phase status is error.
I went through the following link , proceeded with option 2, But still getting same error.
Portal Upgrade Issue
Please advise the resolution for the issue I have.
Thanks in advance
Regards
Srinivas
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM
Edited by: Srinivas Dasari on Sep 10, 2009 5:48 AM

Issue resolved

Upgrade issues list needed

Hi,
We're currently on 4.6b and going to upgrade to ECC6 with unicode I'm trying to compile a list point taken care converting to unicode from ABAP technical point of view. Does anyone have such a list?
Some points i shortlisted are :
1) Use GUI_UPLOAD and GUI_DOWNLOAD rather than WS_UPLOAD and WS_DOWNLOAD.
2) Structures or table headers that contain non-character data need to be identical when moving, comparing, selecting into, updating from, etc.
3) OPEN DATASET filename IN TEXT MODE FOR INPUT ENCODING DEFAULT.
I know there are others. Any help would be appreciated.
aRs

Check the below links
http://www.sapfans.com/forums/viewtopic.php?t=268386&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=263434&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=261051&highlight=upgrade+issues
http://www.sapfans.com/forums/viewtopic.php?t=253316&highlight=upgrade+issues

Errors in Forte 3.5 -Upgrade issue

hello ,
We are having a frequent disruption in the communication SO which has an
externalConnection Class. Did anything change in 3.5? We did not have
these errors in 3L!
After these erros, we have a mutex locking problem which leaves our
application hanging.
Any help will be greatly appreciated!
thanks
suma
Here is an Excerpt of the log file
Task 9: extConn4030a808.Write: 194 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
Task 9: extConn4030a808.Write: 233 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:47
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:47
regards,
Suma Venkatesh

-----Original Message-----
From: Venkatesh, Suma
Sent: Thursday, May 24, 2001 2:39 PM
To: '[email protected]'
Subject: Errors in Forte 3.5 -Upgrade issue
hello ,
We are having a frequent disruption in the communication SO which has an
externalConnection Class. Did anything change in 3.5? We did not have
these errors in 3L!
After these erros, we have a mutex locking problem which leaves our
application hanging.
Any help will be greatly appreciated!
thanks
suma
Here is an Excerpt of the log file
Task 9: extConn4030a808.Write: 194 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:29
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
24-May-2001 09:16:47: VH.G.G..GUIT/GUI0/PLAXRC172.23.4.401/../..;PGYX;
Task 9: extConn4030a808.Write: 233 bytes written to 10
INFORMATION: Network partner closed connection. This usually means the
process at the other end of the wire failed. Please go look there and
find
out why.
Class: qqsp_DistAccessException
Error #: [501, 152]
Detected at: qqcm_HoseFSM::ReceivedClose at 2
Error Time: Thu May 24 09:16:47
Exception occurred (locally) on partition "MerlinWindows_cl41_Part8",
(partitionId = F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105, taskId =
[F2E11800-5003-11D5-BF99-AE145F2AAA77:0x105.7]) in application
"MerlinWindows_cl41", pid 23406 on node laxrc2 in environment
laxrc2.
INFORMATION: Error parameters for Set:0 Msg:0:
Class: qqsp_DistAccessException
Detected at: qqcm_HoseFSM::ReceivedClose at 1
Error Time: Thu May 24 09:16:47
regards,
Suma Venkatesh

R12 upgrade issue:Not able to login using forms:Please help****urgent

We have recently upgraded our instance from 11.5.9 to 12.0.4 in Windows 2003 server.
We are unable to login to forms after upgrade, however we are able access self service responsibilities without any issues.
We are getting APP-FND-01496 when we access any forms responsibility. We have tried all possible metalink notes with no luck.
Any help to resolve this issue will be appreciated.

Duplicate thread ...
R12 upgrade issue:Not able to login to forms**please help
Re: R12 upgrade issue:Not able to login to forms**please help

ECC 6.0 EHP-4 upgrade Issue in phase MAIN SHDRUN/ALTNTAB FILL were negative

Hi Basis Expert,
while doing ECC 6.0 EHP-4 Upgrade in MAIN_SHDRUN/ALTNTAB_FILL phase we are getting the following issue please help us.
Checks after phase MAIN_SHDRUN/ALTNTAB_FILL were negative!
Last error code set: BATCH JOB RDDNT2MT FAILED: Error(s) found in the log(s), accumulated in "ALTNTFI.ELG".
We check the shadow instance is up and we can log in to the system. Check ST22 and SM21 notice no error.
Check the JOB RDDNT2MT (SM37) successfully running and all the job finish without any error.
Hope anybody can share a bit your experience on this issue. we try search the note and find the forum but no luck.
Thanks

Hi,
> 2EETG011 "No shadow system""(environment parameter)""auth_shadow_upgrade"
> 2EETG011 "No shadow system""DB-connect not against shadow tables !"
>
It looks from your log that shadow system is not able to connect to database. Please check your shadow system. Check below link as well:
http://sap.ittoolbox.com/groups/technical-functional/sap-basis/ecc-6-upgrade-issue-in-phase-altntab_fill-1556272
Thanks
Sunny
Edited by: Sunny Pahuja on Oct 15, 2010 1:27 PM

Upgrade issues list

Hi All,
I was wondering if anyone had a list of Upgrade issues (most likely, from ticketting system) to the 5.0 system.
Thanks

Hi mark,
Can u please send me the upgrade issue list to this email address
[email protected]

IDSM-2 - upgrade issue - 5.x to 6.x

Hello All,
I have an issue upgrading the IDSM-2 module I'm playing with.
It is currently running version 5.0(2).
The thing is when I try to upgrade the image to the latest 6.x version using the .bin.gz file, I get the follwing error message :
The filename IPS-IDSM2-K9-sys-1.1-a-6.1-2-E3.bin.gz is not a valid upgrade file type.
Continue with upgrade? []:
There is no image file that is not .bin.gz on the download section of the website. Only recovery images have the .pkg extension.
Does anybody how to troubleshoot this simple(I guess) upgrade issue?
Regards,
Thibault.

You are trying to "upgrade" using a "System Image" (-sys-) file instead of an Upgrade file.
The upgrade file for the IDSM-2 is the standard upgrade file used across almost all IPS/IDS models:
IPS-K9-6.1-2-E3.pkg
It can be downloaded here:
http://www.cisco.com/cgi-bin/tablebuild.pl/ips6

Frustrating Phone Upgrade issue

We need help with phone upgrade issue we encounter when BestBuy associate process our upgrade. Associate is saying we are not eligible but we have not done any phone upgrade since Jan 2011. Our ATT mobile service was established with BB in 2009 and we only upgraded 2 phones in Jan 2011 thru BB. The only recent change in January 2013 was a change of responsibility between my spouse and me since my company has a better employer discount thru ATT. No change and per ATT, no contract and we should be able to upgrade in any retail store. But BB keeps telling us we have issue with ATT and can do our upgrade only with ATT Corporate Store. Our mobile account is a regular family plan account as originally established with BB and just like any BB customer, have employer's discount attached. I don't understand how BB system communicates with ATT system so it is hard for me to explain to ATT what "error message" BB associate is receiving. It has become so frustrating with BestBuy telling us to check with ATT and then for ATT to tell us that there is no issue at their end. We have been a loyal BB customer with all major appliances bought from them including protection plan. The least they can do is work with their ATT representative to figure out between themselves what the issue is. Here we are willing to give both companies our business with new phones and new contracts and no one can help us out.

LTGee -
I am very sorry to hear about this. I am going to send you a Private Message to collect some information from you to see if we can get to the bottom of this. To check your private messages, ensure you are logged into the forum and click on the envelope on the upper right hand side of the forum.
Thanks!
Jesus|Senior Social Media Specialist | Best Buy® Corporate
Private Message

CCX Script - Need to Be updated when Upgrading from 7X to 8X w/ SQL Integration

Got a customer we're planning on upgrading from UCCX 7X to 8X. They are currently integrated with an external SQL DB. I understand I need to download the appropriate driver for 8X for SQL. The question I have though is whether the UCCX scripts themselves need to be updated as well or will the 7X scripts that have the typical DB read/get/write/release work when I do the migration?

They should work as-is but your only way to be sure is to test them. I would only anticipate an issue if you were doing complicated logic that CCX didn't support in the first place. Simple SELECT queries should continue to be fine.
PS- Don't use the Microsoft driver, use this: http://jtds.sourceforge.net/

ECC 6 SR3 upgrade I am getting following error at RSVBCHCK

2EETQ241 Errors found in logfiles - accumulated in file "PSVBCHCK.ELG"
1EETQ203 Upgrade phase "JOB_RSVBCHCK_D" aborted with errors
1 ETH010XRSVBCHCK: Check of open update requests
2EETG050 Update records still exist - Please process.
There is no SM13 nor SMQ1 entries in the system, also reorganiezed update records, also checked following.
SQL> select * from sapr3.VBERROR;
no rows selected
SQL> select * from SAPR3.VBERROR;
no rows selected
SQL> select * from SAPR3.VBMOD;
no rows selected
SQL> select * from SAPR3.VBHDR;
no rows selected
SQL>
Incase anyone had faced similar issues, and found a workarond please let me know
thanks.

Hi Mathew,
Please check if your system has the ABAP program "RMCEXCHK" as per OSS Note no. 1083709.
Once you run this program, it exactly would let you know what are the areas which are causing the issues. Based on that you can empty out the LIS Set up tables.
Also, can you please check the update program for LIS has emptied out the entries in SMQ1.
Regards,
Anil

Solution Manager SR2 and SR3

Hi all,
How can I upgrade my solution manager release 2 to relase 3??
I apply the last sp package stack, it is fine with this?

Yes - right.
Check note 781448 - Support Package levels of SolMan installations/upgrades
Markus

CCX 5.0(2) SR2 to SR3 upgrade issue

Similar Messages

Maybe you are looking for