Cd artwork not burning

I have all the cd artwork in iTunes, but after I burn the cd, the artwork doesn't transfer nor can I recopy any artwork onto the new burned cd. Does anyone have any answers on how to fix this?

You have to enable disk use, consolidate your iTunes library, and then copy the entire iTunes folder to the iPod. Then take the iPod to the new computer and copy the iTunes folder there.
There is an article in the knowledge base that covers this exact topic: http://docs.info.apple.com/article.html?artnum=300173

Similar Messages

  • I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

    I am trying to burn some cds from my playlist on itunes, but my playlist shows many of my songs in light print and says that it will not burn because it is not a file, these are all songs I have purchased quite a while ago, how do i get them to files?

    If they were songs you purchased from itunes, try redownloading them from your purchases...
    if that doednt work, make sure the optuon to copy files to itunes media folder is checked in settings, then find and download from the net. and re-add them to your library

  • I can not burn CD's with my Itunes anymore. It tells  me I am missing CD burner and to re download ITunes. I have done that and it stills does not work. Every time I try, Disc Recorder not found keeps coming up! Please someone help me!!!

    I can not burn a CD with my itunes anymore. It tells me to re download itunes. I have done that and still have the same problem. When I do try, Missing disc recorder keeps coming up. Please help!!!!

    Hello again, Stew.
    Also when I open itunes it gives me a warning and says "The registry settings used by the itunes drivers for importingand burning cd's and dvds are missing. Please reinstall itunes."
    With that one let's first try a reboot and repair.
    Reboot the PC (very important), and the do a *repair install* of iTunes.
    Go to your "Add or Remove Programs" control panel, select iTunes, click "Change" and then click "Repair".
    Does iTunes launch without the error message now?
    If no luck there, try checking for a device filter conflict in your registry:
    iTunes for Windows XP: Troubleshooting CD issues caused by device filters

  • ITunes 8.1 will now not burn/import or play anything at all.

    Ok since installing the new 8.1 upgrade of iTunes I am now unable to anything at all. First of all a window popped up tp inform me that the drivers could not be found so I couldn't burn so please re-install iTunes. So I did and now not only will it not burn anything, it will not import ( it won't recognise any cd that i put into my drive at all ),it won't recognise my ipod and it won't play anything that is in my music library at all. So is there going to be a repair to this from apple at any point? I now have now way of getting anything onto my ipod at all. I have tried to re-install itunes several times since and still get nothing. It just does not do anything at all!!! Come on apple, this is serious, can someone please sort it?

    try removing the iTunes, then do a fresh install and this time check the box for installing both Bonjour for Windows and Quick Time.

  • Artwork not syncing to iphone 4 windows 7 64 bit

    artwork not syncing to iphone 4 windows 7 64 bit, its all there in itunes but it does not sync over, seems to be random
    thanks

    dylan1981 wrote:
    The EXACT same thing is happening to me. My phone is brand new, so the fact that I can't activate it due to this problem is really frustrating. I've uninstalled and reinstalled iTunes several times, followed apple's instructions in its problem solvers guide...nothing seems to work. I've messed around with the drivers a bit too, with no luck. Anyone have any ideas?
    Go to the Event Viewer (Control Panel || Administrative Tools || Event Viewer) and look under Windows Logs || Application. Do you see any Bonjour errors? Since Windows 7 recognizes the camera part of the iPhone (nicely done Win7 integration!) Microsoft is probably not the culprit here.
    Uninstall/reinstall iTunes is part of the process, but you also have to make sure you uninstall all the other components Apple installs (Apple Mobile Device Support, Bonjour for Windows, QuickTime), do a reboot, and then install everything from scratch. That may fix the problem.
    This is exactly what an Apple guy talked me through over the phone. (I think I even uninstalled Apple Software Updater) I had a similar problem with the iPad on Win7 x64 - it was Bonjour that is the culprit. The x64 flavor of Bonjour for Windows is not as stable as the 32-bit version.
    But everything has been golden for me since the reinstall...
    Give that a try.
    Then if not, you could start looking to see if there is another ZeroConf/SSDP provider that is conflicting with Apple's somehow.
    SS

  • 1st Gen iMac G5 "SuperDrive" Not Burning CDs or DVDs

    as of late it seems my superdrive is not feeling very super,
    after a recent Cleaning (reformatting and installation of OS)
    I was unable to restore any of my work from backup DVDs.
    The drive will ONLY read CD/DVD Meadia that is Mastered
    ie: a Movie Bought or rented from a store...
    and the same goes for Audio CDs. I'm in Multimedia
    so of Course at this point NONE of my Backup disks are functioning and I can't
    write any of my Current works to CD/DVD...
    The Error message is as follows
    - The Disk was not Burned do to a Medium write error......(gulp).......help?
    My Latest&Dearest iMac G5 (Vikki)   Mac OS X (10.4.9)   Over 20 other various macs icluding some of my CUSTOM Macs
    My Latest&Dearest iMac G5 (Vikki)   Mac OS X (10.4.9)   Over 20 other various macs icluding some of my CUSTOM Macs
    My Latest&Dearest iMac G5 (Vikki)   Mac OS X (10.4.9)   Over 20 other various macs icluding some of my CUSTOM Macs
    My Latest&Dearest iMac G5 (Vikki)   Mac OS X (10.4.9)   Over 20 other various macs icluding some of my CUSTOM Macs
    My Latest&Dearest iMac G5 (Vikki)   Mac OS X (10.4.9)   Over 20 other various macs icluding some of my CUSTOM Macs
    My Latest&Dearest iMac G5 (Vikki)   Mac OS X (10.4.9)   Over 20 other various macs icluding some of my CUSTOM Macs

    To Apple Discussions.
    Open up your OS Help Menu. In the search field type dvd.
    In the next window a list of troubleshooting topics will appear. Click on the one(s) that matches your issue.
    Hopefully, you will be able to solve your problem from the list.
    If not, please post back.
    P.S. You sure own an awful lot of Macs!

  • Windows 7 does not recognize cd/dvd drive. Will not burn a disc

               In November 2013, I  bought a refurbished hp Compaq 7900 convertible minitower, Product No. NJ3226UC#ABA, 32-bit.  Windows 7 and WMP 12 were installed by the company that refurbished it.   WMP's  play, rip, burn, sync worked perfectly.
               I made the mistake of installing itunes.  I purchased music and made a playlist from my library and itunes.  I tried to burn the playlist with Memorex discs.  WMP burn would kick out the cd at 99% complete.  I tried a different brand of disc and had the same  problem.  The message each time was 'Windows Media Player Encountered an error while burning. Verify that the burner is connected properly and that the disc is clean and not damaged.'  I tried burning a disc using itunes burner but it didn't do anything.
               First, I removed every Apple application from my computer.  Then I ran Microsoft CD/DVD trouble shooter.  It didn't correct the problem and gave me the message "cannot locate CD/DVD burner".  I ran trouble shooter in the Control  Panel selected System Security's, Find and Fix. Then Selected  Configure a Device .  Results were 'Hardware may not be detected try to do what you wanted to do again' I tried 2-3 times.  WMP would not burn.  Tried Apple for help and didn't want to reinstall itunes.  I reinstalled Quick Time.   Followed Microsoft's 5-step resolutions:
              1.  Used the troubleshooter in Control Panel.                                         
              2.  Ran CD/DVD Fixit trouble shooter.
              3.  Manually fix corrupted registry.
              4.  Update or reinstall driver.
              5.  Create a sub registry key. 
    I tried to burn after every step and got the same result.it burned to 99% and kicked out. I used system restore back to May 15, 2014  thaat was before installing iTunes.  No burn.   Checked  driver and response was that 'Driver is working.  No problem was found'.    Today, ran Troubleshooter in ControI Panel and this was the messsage, 'Configuration Settings May Be Incorrect'.  How do I correct  this?  Help!  What next? 

    Hi,
    You were given some very good advice on your other post.  I ran into a very similar issue when I had installed iTunes and the end result was that I had to do a factory recovery back to a day one condition. Then I had to do a slow software installation process, checking every time I had installed a third party application.  I got tripped up a couple of times but determined that I had to install iTunes before installing other CD/DVD media programs (Roxio,WMP and Cyberlink).
    Do a fresh OS installation without the extra third party software and then install Imgburn.  Then use Imgburn to determine the capabilities of your optical drive and match the media specifications those detected by Imgburn to the media type that you are using. Do not use cheap media as the firmware in your optical drive may not support it. I prefer to use Verbatim media. Now see if Imgburn will burn your optical media before attempting to install iTunes and other CD/DVD optical media programs.
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.

    After installing any version of itunes. Told failed to install properly and could not burn or import music from Cd's. Also will not allow eithre one of my 2 ipods to sync with it as well.

    Could you post your diagnostics for us please?
    In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
    ... and click "Next".
    When you get through to the final screen:
    ... click the "Copy to Clipboard" button and paste the diagnostics into a reply here. (Use your Ctrl-V keyboard shortcut to paste.)

  • Drop zone of loop in the film stip template, works in simultor, not burning

    Droping a loop from the film into the drop some in a chapter menu and it shows up on the simulator. when I go to burn or build etc there is just white where the loop should be. everything else is workinng fine just but no loop- any ideas out there?
    thnx

    OK bigger problem- the all NTSC DVD that used the same template [film strip] also had no problem in the simulator, but I just build/formated it, and the drop zones in the menu buttons whent all white again- same as yesterday. I also checked and they were all software based in the menu prefs. something is wrong here, there is like a "flash frame" of the first frame of the loop, frozen for a split second. and then when the motion starts it all goes to white in zone. I am really flumixed here, did I change something in the targets or is it still burn realted? but why does it work in the simulator, like a charm and then it does not burn????? FRUSTRATED

  • Idvd will not burn after upgrade to maverick

    Hello-
    I just upgraded to maverick and now iDVD will not burn a DVD - says it does not have a compatible superdrive. It was working fine until I upgraded. How can I burn a nice DVD now?

    Suggestion only. Before launching, did you also check for updates via apple's software updater?

  • Superdrive will not burn on mountain lion

    After installing mountain lion on iMac, superdrive will not burn or recognize cd/dvd. Have tried several different brands and burning software with same results.

    If you have a CD or DVD, insert the disk and see what happens. If the drive kicks back the disk or gives you some kind of error message, then it's most likely a hardware issue, and might require a repair. However, if the drive seems to work fine mechanically, then it's a software issue.
    http://support.apple.com/kb/HT2801?viewlocale=en_US&locale=en_US
    http://www.macworld.com/article/1166312/cures_for_an_uncooperative_cd_dvd_drive. html
    Follow these links, and post with your results; others will gain from the info!

  • Will not burn photos to disc

    iPhoto will not burn photos to a DVD disc(Maxell DVD+R).
    iMac response is:
    "The burn to the SuperDrive drive failed. The disc drive didn’t respond properly and can’t recover or retry."
    These Maxell DVD's are probably 2+ years old. However, I was able to burn 2 disc early this morning. Could it be a heat problem with the SuperDrive?
    Your Thoughts?

    If you have burned 5 or 6 disc in a row then maybe heat could be a concern.  I don't think so with just 2.  Are you able to burn a disc, CD or DVD, from the Finder or is it just from iPhoto?
    Run the Apple Hardware test as described here: OS X Mountain Lion: Use Apple Diagnostics or Apple Hardware Test
    OT

  • IDVD will not burn disc after QT update

    IDVd used to work just fine. I did software update and updated Quicktime to version 7. I found that my Quicktime Pro key for QT 6 would not work with QT 7. I called Apple support and they told me how to revert back to QT 6. I followed their steps and successfully have QT Pro 6 back, but not my iDVD projects will not burn. It gets to stage 4 multiplex and burn and spins for hours. When I hit cancel, the disc ejects and is unburnt.
    I have followed Apples steps to solve a no burn when you upgrade to iDVD 4.0.1 (remove encoded assets) and this does not fix the problem.

    Hi Dennis
    There is ways to delete all of QT and then make a clean install but the
    easiest way is to download a back to QT 6.5.2 file from Apple support
    and downloads.
    I've done this and keep it till I get an upgrade that takes away the old
    files before installing the new ones.
    Yours Bengt W

  • Since 10.4.4 (10.4.5) - i can not burn Data-DVDs anymore...

    System: iMac G4, 1GHz, 1GB RAM, Mac OS X 10.4.5, 4x SuperDrive (SONY DVD RW DW-U10A)
    Dear Apple Support,
    since Mac OS X 10.4.4 (same with 10.4.5) i can not burn a Data DVD-RW anymore. It is so annoying. I want to burn my backup on a DVD-RW with the Burn Folders in Mac OS X. it is not possible.
    The Finder burn dialog hangs at the "ending burning process". It is so annoying.
    It's not possible to erase this "half burned" DVD-RW too! So I have here a lot of destroyed DVD-RWs around me...
    The burning of DVD-RWs is a problem since 10.4.0 here on my machine. With 10.4.3 it was half o.k. ... But since 10.4.4 (10.4.5) nothing works anymore.
    Your product "Mac OS X Tiger" is nearly one year in the market. And burning a Data-DVD is not a exotical thing. It is a essential feature of a Operating System today. So what are you doing in your Test-Labs?
    I am sitting here since 1 year with an Operating System from Apple an it doesn't works in the essential features.
    Whats about your slogan "It just works"?
    What happens with the quality of Apple?
    Under 10.3.9 Panther i can burn everything. It absolutly no problem there.
    So i don't understand what are you doing with Tiger?
    It's so annoying!
    Regards
    Roessner

    Hi,
    I've got exactely the same problem and I have no solution at the moment.
    Is there someone who could help us, please?
    Thanks !
    you can reply to : [email protected]

  • New problem. I can not burn a playlist to disk.

    New problem. I can not burn a playlist to disk. The 'checking playlist' now takes about one second, looks very much like a malfunction here. Seems to initialize the disk - them moves straight into 'burning/finalizing disk' which also takes about one second. Then 'burning - finishing disk takes a little longer -
    Error reading is "The attempt to burn a disc failed. The disk drive didn't respond properly an can't recover.'
    This happend once before a while back and I thought it was 'too skinny disks'. Using 'printable disks; seemed to fix the problem - until now.
    Blank cd's can  be opened in the finder and files burnt to them.
    DVD's can be burned from DVD Pro.
    Music cd's and dvd's can be played.
    Just can't burn the itunes playlist.

    lewelew
    From your iMac? OS 10.9.2? iTunes? Other? please give as much info as you can about your system hardware and peripherals, OS, software, etc. Is this misbehavior new? First try? You get the idea, too much info is not possible.
    CCC

Maybe you are looking for