CD Audio and CD Digital controlled by Wave/MP3 sli

Using Platinum Li've! card with digital I/O daughter card. I have connected CD ROM (4 pin) cable to CD In on soundcard and DVD to CD SPDIF in on card (2 pin cable) but both devices are still controlled by the wave/mp3 slider on the surround sound mixer. I have downloaded latest drivers, too. I would like to control these devises by their corresponding mixer sliders (CD digital and CD audio). How can I do this?
Thanks!

JeffFun,
You may need to disable Digital CD extraction for your CDrom for this to work. This is done in device manager on the properties section for the CD. This should allow control of the levels directly.
Jeremy

Similar Messages

Playing audio and video files in JSF (.wav,.mp3)

Hi,
I would like to know how to play audio and video files such as .wav,.mp3 in jsf .
could any one please post the code for playing the wav files.
Thanks,
Ram

There is no JSF component to do this, so you would have to write your own custom component to render an <object ...> element.
Or, you can use <f:verbatim> wrapped around an html <object ...> element.

Audio tape database + digitally controlled tape deck?

I have a client who wants to digitize his large library of cassette tapes, starting with 250 tapes of stories he has told his children. I have been searching for an OS X software product or freeware that could do the job well, which would include the ability to play the indexed audio file.
The data to be indexed would include: story, tape #, start time (tape index), and all the characters in the stories, so that one could retrieve a list of stories that contain a particular character.
Another useful thing would be a digitally controlled tape deck, but the only one I can find is for the PC only. (there are some rs232 controlled decks, but no real details on how to control them, and no info about what software, and no RS-232 interface on the mac laptop in question.)
If anyone has any ideas, or knows a better forum to post this on, please let me know,
Thanks
Joel

Hey Joel,
Well first lets talk about digitizing. There are many methods, and pieces of equipment to use but you can probably learn some info from the macworld article on digitizing tapes. I assume you saw the same USB deck that I saw- The Plusdeck, and while it currently does not support OSX, hope may be on the way because in their forum they have posted a want ad for a mac developer. In terms of cataloging, personally, I would just use iTunes. You can include Name, Album, Artist, Track Number, Disc Number, Grouping, Composer, BPM, Genre, and it also includes a large comments field in the metatag. I would think you could adapt all these field to your needs. However, many database apps are available for the Macintosh. In the pro world, Filemaker Pro is a pretty accepted standard. However, pricing for it is pretty steep, at $299. Another solution which may be a little more price acceptable is EagleData, which is a freeware database app. To tell you the truth- I really don't think you want to get into RS232, but if you're really interested, we can talk about programming it and the different protocols. Hope this helps...
--Justin S.

How to check if a user has clicked on a digital control and changed its value?

Greetings !!!
I am looking for a simple way (without using Windows messages)of knowing if an user has clicked on a digital control and changed its value.
I have tried the key focus property; but I have to click twice to make it work.
If somebody knows a better solution; please let me know.
Thank you in advance for your help

If you just want to know if the value has changed you can put it in a while loop and use shift registers to see if the value has changed.
Brian
Attachments:
Changed.vi ‏22 KB

Keyboard: audio and Brightness control keys not working with or without fn

The Keys for controling Audio and Brightness (F1-F5) do not work.
Also combined with pressing the "fn" key the keys do not work.
So i only control audio with the remote control or the slider in the menubar.
Making a reboot with deleting pram didn't help.
I'm running the up to date version of leopard on a macbook pro (core2duo).
I also searched in the forum for this problem.
I oten read about "sytem control"-"keyboard and mouse"-"keyboard" and the F1, F2, etc. to use as...
but switching this button on or off doesn't change anything.

problem solved:
the couse was the software update 1.1 for macbook pro, because there i had the problem like in this thread: http://discussions.apple.com/thread.jspa?messageID=6142512&#6142512
and did the solution like that, but there i maybe made some mistakes with renaming and copying, so i rinstalled the update and renamed it a copied to plugins, and now all works as it should.
thanks for help

Powerbook (digital audio) and 1/8" jack NOT getting along

ok see if you can help me troubleshoot this.
i bought two of these cables:
<http://www.cablesforless.com/index.asp?PageAction=VIEWPROD&ProdID=2779>
"Our Custom Made 3.5mm Male to 2-Male 1/4 inch phono plugs audio cables are perfect for connecting your speakers and microphones. These cables feature Belden's 1800B digital XLR cable and Steren® precision machined connectors. To ensure maximum signal integrity and protection from RF and electromagnetic interference the cable also features a Beldfoil® shield and fully shielded connectors. Professional termination using high grade solder ensures optimal signal transmission. Designed for optimal sound quality, Belden's performance speaks for itself. Compare Belden's specifications (below) with those of other digital XLR cables and see for yourself how Belden cable is unmatched. Belden Brilliance® teamed with Steren Connectors brings audio to life!"
sounds good, right? they both exhibit the following symptoms.
i'm using it in the headphone jack of my powerbook g4 15" and going out to a little mixer so i can hear system audio, itunes, etc. through my system. this longer cable is replacing a monster cable of the same kind (but shorter).
i'm getting absolutely HORRIBLE buzz when i plug it into the headphone port. if i jiggle it a bit i can get it to behave but only if it sits just right.
on a crt imac and an older titanium powerbook G4 the issue is much better. i still hear a line hum. i wouldn't want to record like this, but it's not a nightmare.
on an ipod plugged into the power adapter it works beautifully. however, i CAN get it to buzz horribly if i jiggle the plug as i insert/remove it.
eyeballing it with the monster cable tip, it looks exactly the same.
so on one hand, the monster cable works great in all uses.
the cablesforless cable works terribly on the powerbook but nowhere else.
now here's a clue: the powerbook G4 has combination analog/digital input and analog/digital output jacks. i haven't been able to repeat it reliably, but the cablesforless cable seems to be able to trigger the digital interface part, as evidenced by a red light shooting out of the port.
unplugging the powerbook totally removes the buzz.
i get the buzz when this cable is in EITHER the input or output jack.
tried a different power supply in a different jack in the same room... same results both ports (slightly different tone to the buzz)
if i remove the little mixer and plug the 1/4" cable ends into two inputs on a practice amp, i get the same issue.
finally, i got another digital audio powerbook g4 15" and the connection seems to be slightly more reliable, but still problematic.
PowerBook G4 Aluminum Mac OS X (10.4.5)

For starters, EPUB is a profile of XHTML, not HTML5. Further, audio and video support are part of the recently-approved EPUB3, which the release notes for ADE 1.8 explicitly say is not yet fully supported. Specifically, <epub:trigger> will allow you to use audio and video: http://idpf.org/epub/30/spec/epub30-contentdocs.html#sec-xhtml-epub-trigger
Do these EPUB files that you're not seeing in ADE pass validation? http://validator.idpf.org/
Basically, it sounds like you're trying to do things that ADE isn't supposed to support yet, and in a way it is unlikely to ever support (since ADE is known to be pretty conformant to the EPUB standards, it's very likely it will support the EPUB3 version of doing things rather than the hackery I've seen for Apple's reader).

AV digital works audio only on touch but both audio and video on ipad

The av digital accessory does audio only on the Itouch but works fine on the IPad showing both audio and video?

To try and keep it simple, there are 3 variables here.
1) Acquisition - You can either record with a stereo or mono mic, you've probably used mono.
2a) Capturing - In the 'clip settings' tab of the log and capture window, you can choose how you want to capture your audio, choosing from the 'Audio Format' drop down menu.
2b) Editing - If you've already captured some material, in the timeline, check the audio tracks. If, for example, a clip has audio tracks a1 and a2, and you can see 2 sets of small triangles at the start and end of the clip, you have stereo audio.
(double click the audio track and in the viewer you will see a 'stereo a1a2' tab with linked stereo - any changes you apply here will equally apply to both tracks - although you can 'pan' the audio using the 'pan slider' for example, if you want the sound of a car approaching to start in the left speaker, then move to the right speaker as it moves past on screen)
If there aren't the triangles, double click the audio and in the viewer you'll have 2 seperate mono tracks - mono a1 and mono a2 - assuming you haven't captured the audio format as 'mono mix', ch1(L) or ch2(R).
You can link seperate mono tracks in the timeline by selecting the audio clip and hitting opt (alt) L, (similarly, you can unlink stereo track by the same procedure).
If you've got a single mono track, you can duplicate the track and then link, pan, etc as required - can't remember exactly as it's ages since I captured single channels.
3) Output - The decisions you make in 2) determine how your content willl be outputted. (Is 'outputted' a word?)
I'm by no means an audio expert so I hope this is clearer than mud.

Can I author hi def HDV video and surround digital audio by sending a file

Create a bl;ue ray HDV video and surround-digital audio
Posted: Nov 2, 2006 10:43 PM
I have a MAC G5 dual processor, Final Cut Pro, DVDSP, and a home network connecting the MAC to an IBM PC with a Blue Ray Burner. You would think that wioth my Sony HDV camera, I could create HDV hi-def video material and a Dolby 5.1 or DTS audio track along with it and burn a Blue REay media and then be able to play it on a Sony Blue Ray player in my home theater.
Well, How do you do this? I have been wanting to create some of my own stuff and record like this so anyone with the equipment could view it.
Please RSVP

I recently made a dual layer disk on one of our G5s without a dual layer burner by doing the final burn on a PC. I imagine you could do the same with blue ray.
Just edit the project and make your hi def DVD on the MAC using FCP and DVDSP. In DVDSP Build the project to a suitable folder on the hard disk. Copy the files to your PC and burn the disk as a data disk with the burner software.
Trevor

I need to capture streaming audio and save to a wav file

I need to be able to capture an audio stream delivered via ethernet using UDP protocol and then save to a wav file.
I currently can capture the data stream but do not know how to format the data to save it to a file. Our format is 16KS/s, 16bit, PCM, no compression.

Did you do the thing about searching in the example database. Let us use that as base for discussion. Those who put in some effort will be rewarded. Also check out the AU file format http://en.wikipedia.org/wiki/Au_file_format As it is big-endian http://en.wikipedia.org/wiki/Big-endian the numbers can be stored as is in Labview. Must players,matlab, etc can use the AU file format.
Besides which, my opinion is that Express VIs Carthage must be destroyed deleted
(Sorry no Labview "brag list" so far)

Servo motor control using CRIO+FPGA and 9477 digital out module

Hello experts,
I have a futaba BLS551 brushless motor digital servo (3 wires-+,-, signal). i also have a CRIO+real-time+fpga and 9477 digital out module. how can i generate servo signals using this module
please help...
Thanks,

freemason,
In order to control your servo motor with the FPGA and or DIO module you will have to write drivers to control your motor and drive. While this is possible is an extremely complicated and time consuming process. I would highly recommend you consider using the NI 9514 with soft motion as it will provide full servo functionality and is relatively easy to use.
Regards,
Sam K
Applications Engineer
National Instruments

Digital control and indicator customisation

Hi, just a quick simple question. How do u customise a digital control or indicator. Basically i would like them four times as large as they are as standard. Any other help in how to customise different parts of the digitals would be greatly appreciated.
Thanks Stuart

The height of a digital control/indicator adjusts itself to the size of the font you choose for the numbers inside. To adjust the size of the increment/decrement buttons, this is done in the control editor. Right click on the control and choose Advanced>Customize. There's a little icon on the tool bar that looks like a wrench. Click on this to enter customize mode and you can change it to look like you want.

"error while trying to synchronize Audio and MIDI"

Hello All,
Just got Logic 8... installed (as upgrade from 7)
I keep (consistantly) getting this:
"error while trying to synchronize Audio and MIDI" when in play or record mode... has anyone any ideas regarding a 'fix' or maybe even to point out stupidity on my part re settings; I'm open to comments here and would obviously love to get this fixed/sorted out.
System is basically: G5 Dual 1.8/OS 10.4.10/MOTU 828 Mk2
Thanks in advance.

Hi,
I first did what the manual was telling me but that made no difference as the sync would drop within 5 to 15 bars... very frustrating.
Since my original posting I have spoken with MOTU regarding this Audio/MIDI sync problem. There is evidently a simple reset that needs to be done (that is if like me you are using a MOTU 828 Mk2 interface), you have to toggle through both digital input and output settings in the Audio Control Panel. The problem then goes away.
I hope that is helpful. I think that this probably is relevant to all MOTU interfaces, or is at least worth trying if you are having this problem... maybe other manufacturers too... ?
Cheers, Kick

CP4 unable to decode and import the selected wav/mp3 file

I am trying to import a .wav file into a project and get an error message 'unable to decode and import the selected wav/mp3 file'.
I have tried the solution huan_miguel posted a week ago for someone with the same problem.
http://blogs.adobe.com/captivate/2009/03/adobe_captivate_4_installatio n.html
executed all the steps described in this link.
Unfortunately, the problem is still there.
Any other solution?

You're probably going to need to do both.
Although Captivate can certainly accept a 10 meg audio file, you would need to add it to the movie and then synchronise the slides to the audio. Chopping the audio file up and adding the relevant bits to each slide has both advantages and disadvantages. It's easier to control the playback synchronisation when you divide up the audio, but it's more work.
Take a look at this graphic from SoundBooth when I export an audio file recorded in Captivate 5:
Notice that it shows the bitrate of the Captivate WAV file as being 16 bit. This is quite a low bitrate. You can go as high as 32 bit in SoundBooth, however, in my experience, when you try to import a WAV into Captivate that is over 16 bit you will encounter issues. Cp just doesn't seem to like it.
If you want to learn more about bit rates in multimedia: http://en.wikipedia.org/wiki/Bit_rate
Suffice to say, you need to find out what the current bit rate of the audio file is, and if necessary, save it as 16 bit for Captivate. For this, you will require some kind of audio editing software.
You can try using Audacity as someone else suggested: http://audacity.sourceforge.net/ and try exporting the file out as 16 bit.
However, if you are going to be doing quite a bit of this type of work, I would suggest you invest in Adobe Soundbooth, or something of that ilk. You'll enjoy the experience more.

HT2844 iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working...

Hello,
My iMac 27"(late 2009), Audio in/Optical digital audio out port, stopped recognizing my new Bose speaker system, previously working through that port. I tested the speaker system through my iPhone, and it works fine. I hooked it up to the Headphone out/Optical digital audio in port, and it works through that port also. I did a computer restart, I also checked all wiring and did a system repair on the computer. I also restarted the computer in mode where I could use the system utility, and the computer still did not correct the matter, and it reported everything as being "ok". I wented into "sound", through system preferences, and the computer does not recognize anything I plug into the Audio in/Optical digital audio out port. When I plug the speaker sysytem into the headphone out/optical digital audio out port, it does recognize the Bose speaker system as being "headphones".
Reading through a lot of forums, I hear everything from compatibility, to the port being stuck, and on and on. Since the port was working before, and just quit working one day, I wonder if there is a capacitor or fuse or some type of similar thing is blown, and causing the port to be unfunctionable. Maybe the port went bad, but before this time, I had never used it, and the computer does not move around, and I never plug in and pull wiring out unless needing to, and that being rare.
Here is a link to Costco, where I bought the system, and the exact system I have, if this is any help: http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=bsd&cs=04&sku= A4092931&ST=pla&dgc=ST&cid=262075&lid=4742361&acd=1230980794501410
By the way, I am running OS X Mountain Lion (10.8.5). I upgraded to Mavericks about a month ago, and expeirienced a number of issues, and had to take my iMac into Apple. Talking with the tech, I decided to wait for a while more before I upgraded to Mavericks. I try and keep the computer maintained.
If any of you have any ideas regadrding wear and tear, and fix I can do, etc., besides having to take my computer into Apple? Thank you, and potentially all of you, for your time and effort in helping me with this issue. Thank you kindly.
davE

Okay, davE, first, you have posted in the "Mac Pro" forum (not Macbook Pro), so we can't be super helpful
but we help you. First, hold down the Option key while clicking on the speaker icon at the top of your screen. This should show you all the inputs and outputs you have. you could check in "About this Mac" then "More info" to see whatever's recognized. Then, maybe, fire up Audio MIDI. your speaker system should show up there. something might have gotten set incorrectly. You can test it there. I guess you are using the good ol' analog cable for connection, and it works on your iPhone, so the cable isn't bad. You could try this. it 's an adapter which might solve your problem
http://www.amazon.com/gp/product/B004HBWYQ6/ref=oh_details_o00_s00_i00
depending on which model of Bose speaker you have, you might try doing a product reset
turn off speakers...unplug power cord from outlet...wait 1 minute..plug cord into outlet..turn on speakers..
\\turning off automatic standby||
press and hold top of control pod for 6 seconds until you hear 2 tones that go from high to low
other than that ,I don't know
John B

Audio and video drivers defect?

Hello there,
since yesterday i have a big problem with my iMac. It can't play any Audio and Video anymore. Video editing like Final Cut Pro 7, Premiere Pro and After Effects are crashing, when youre trying to start them. Same thing with iTunes and Diablo 3. Photoshop seems to work fine. Browsing in the internet is fine but also no video and audio here. And my system seems to be way slower than before.
What did happen? Well i was working in after effects and hearing some music via iTunes and had some preview running in the finder (cover flow i think is the name of feature), Then the sound stopped but i didnt bother to much about it. But then cover flow also stopped working. So i did a restart and after that the problems were there.
My Suggestion: After Effects is missing output-modules, in the audio menu in the system preferences there is no output modul avaiable either (no, even no digital) although the boot sound works perfectly. So i guess the drivers for audio and video aren't working anymore. But i have no idea how to fix this.
What i've tried: i've reseted the nvram two times, i install mac os X snow leopard again (without deleting the previour installation) and run all updates. I also reseted the System Control Manager (unplug the imac for fifteen seconds) and run the Apple Hardware Test. The latter said there is an error 4MDT/4/40000003:HDD -1299. No fking clue what this means. Google didn't help.
Can someone help me pls or do you know if the people at the genius bar can handle this kind of problem? I have an appointment at the genius bar on saturday, but i have no idea how trained these people are at fixing mac os issues.
ah and before i forget: i didnt configure the time machine :/ so there is no easy moving back to a time the imac was working.

Yeah i know its the hard disk drive. I just cant find anything what this code means besides theres something wrong with hdd
And yes i already backed it up, but anyway thanks for your advice.

CD Audio and CD Digital controlled by Wave/MP3 sli

Similar Messages

Maybe you are looking for