Cd burn 4450 error

Seems that in iTunes I can download a few of the playlist songs and then I get this error notice...any thoughts

What kind of cd are you using (cd-r, cd-rw?)?
Have you tried another brand of disk?
Have you tried lowering the burning speed?

Similar Messages

Why is there a 4450 error message coming up and i can't burn cds???

I will try to burn a playlist to disk, but when i start to burn a CD, it stops in the middle and says something about a 4450 error. I've been through several blank CDs and have tried to fix it by doing all the steps iTunes recommended, but nothing's working. What do i do?
Toshiba Satellite M45-S355 (is this what it means by model?) Windows XP

I am also receiving the error code 4450 message each time that I try to burn a CD. If anyone has suggestions, please let me know.
Dell Dimension 8400 Windows XP Pro

Attempt to burn failed - 4450 error

I see at least two other people have encountered this error. I put a new CD in and attempt to burn some purchased songs to it. The process starts, looks like it's working on the first song, and then I get a message that iTunes is cancelling the burn and the error:
"The attempt to burn a disc failed. An unknown error occurred. 4450."
When I check the CD, all the tracks are list as 1KB .cda files which is, of course, enough to make the CD useless.
I found a KB article at one point that suggested updating my CD drivers. I checked but there were no newer ones that what I have installed already. Has anyone solved this problem in any other way? My CD drive is listed as LG CD-RW 8080B when I look in device manager. I also just updated to the latest version of iTunes.
Compaq Presario - Pentium III Windows XP Pro

I'm having exactly the same problem. Get the message after it burns the 1st song. I've run the latest Itunes updates, tried to reinstall it, same problem. Gone through 10 blanks now, very frustrated, never had the trouble before. I've tried Maxell & TDK discs. Moved burn speed way down, still no deal. No updates are available for my driver either. Here is my diagnostic. I keep seeing others with this problem, but no real solutions yet, argh.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 4300
iTunes 6.0.3.5
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: MxlW2k (1.0.1.101), Cdr4_xp (6.2.0.132),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: 16MB ATI Rage 128 Ultra\1002-5446-22
IDE\DiskWDCWD200EB-75CSF0_____________________04.01B04, Bus Type ATA, Bus Address [0,0]
USBSTOR\DiskST3160023A________________, Bus Type USB
IDE\CdRomNEC_NR-7900A___________________________1.08___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: _NEC NR-7900A, Rev 1.08
Audio CD in drive.
Found 11 songs on CD, playing time 34:04 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:35:33
Track 3, start time 08:15:43
Track 4, start time 11:23:64
Track 5, start time 14:46:11
Track 6, start time 17:35:63
Track 7, start time 20:20:67
Track 8, start time 21:55:06
Track 9, start time 26:27:52
Track 10, start time 28:46:42
Track 11, start time 31:31:32
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 20 24.
The drive CDRW speeds are: 4 8 16 20.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: _NEC NR-7900A on CDR media at speed 4X.

HT203164 I tried my first Windows CD burn with iTunes; the burn fails at different points in the burn with error codes 4450 or 4280.

I tried my first Windows CD burn with iTunes; the burn fails at different points during the burn, with error codes 4450 or 4280.

I have the same problem, after years of everything working great. Last time this happened I tried using a different brand of CD and it worked, but I must warn you that now iTunes rejects all three brands I have been trying to use.

4450 -- error burning CD

I am consistently encountering the dreaded 4450 error.
I have slowed my burn speed to 12x. Still getting the dreaded 4450 error.
My iPod software is 1.1.3
_*Even playlists that I have SUCCESSFULLY burned before now get this error._*
Does anyone know if Apple is even addressing this issue? Is it automatically a hardware error? Is my drive going bad? (I'm not having trouble writing to this drive with other applications.) Did I get a bad run of CDs? Does Apple ever weigh in on this topic?
Help!!!!!

I'm getting the same message and posted the same topic yesterday, but with no replies as yet. If I find out anything I will surely let you know, and hope that if you resolve this, you might look me up and let me know how.
I'm a bit jack of apple I must say, they do not have specific help, or seem to be addressing any of the issues people are having in these forums, which is unlike any other company I have dealt with to date. Everyone else seems to have support, but when you look for apple's support, you keep getting these forums. They are a large enough company to warrant some online support of their own.
Good luck, hope you get a resolution, but I am suspecting, as you are that the burner is on the way out. I hope it's as simple as that, do you know how long you've had it ??? I must be going on 5 years now, so it's done it's job, just might need to be replaced.

Receiving cancelling burning disc error 4420

I used to be able to burn discs from iTunes. Now a few seconds into burning it stops and I receive a message saying "Burning disc cancelled, error (4420)" and the disc pops out.
Any suggestions how to resolve?
Thanks,
Don

Hey!
I am having the same frustrating problem. I have run the diagnostics....any thoughts????
Trying to prepare music for a wedding, time is running out!!!! Yikes!
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Dell Computer Corporation Dimension 4550
iTunes 7.3.2.6
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (5.3.4.21),
UpperFilters: pwd_2k (5.3.4.59), Cdralw2k (5.3.4.21), GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce4 MX 420
Connected Device Information:
Disk drive, WDC WD600BB-75CAA0, Bus Type ATA, Bus Address [0,0]
CD-ROM Drive, HL-DT-ST CD-RW GCE-8481B, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
D: HL-DT-ST CD-RW GCE-8481B, Rev C102
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 8 12 16 24 32 40 48.
The drive CDRW speeds are: 8 12 16.
The last failed audio CD burn had error code 4450(0x00001162). It happened on drive D: HL-DT-ST CD-RW GCE-8481B on CDR media at speed 16X.

Burning disc error

i have tried updating drivers and windows (xp sp2), reduced writing speed to 8x, udpated itunes, using cd-r and i STILL get an unknown disc error occurred-cannot be burned. here are diagnostics
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Sony Corporation PCG-K35(UC)
iTunes 7.1.1.5
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (6.1.1.48),
UpperFilters: Cdralw2k (6.1.1.48), pwd_2k (6.1.1.48), GEARAspiWDM (2.0.6.1),
Found aspi32 running.
Current user is an administrator.
Video Display Information:
RADEON IGP 345M
ATI MOBILITY RADEON 9200
Connected Device Information:
DiskDrive, photosmart printer card reader (HPH11), Bus Type USB
DiskDrive, MemoryStick or MemoryStickPro Device, Bus Type SSA
DiskDrive, TOSHIBA MK8025GAS, Bus Type ATA, Bus Address [0,0]
CDROM, SONY DVD RW DW-D56A, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
E: SONY DVD RW DW-D56A, Rev PFS3
Audio CD in drive.
Found 15 songs on CD, playing time 58:28 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 04:38:20
Track 3, start time 08:40:40
Track 4, start time 12:30:63
Track 5, start time 16:19:25
Track 6, start time 20:16:08
Track 7, start time 24:28:00
Track 8, start time 27:49:71
Track 9, start time 31:58:43
Track 10, start time 35:59:36
Track 11, start time 39:54:44
Track 12, start time 43:31:33
Track 13, start time 47:20:59
Track 14, start time 50:42:43
Track 15, start time 54:29:64
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 10 12 16 20 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4251(0x0000109b). It happened on drive E: SONY DVD RW DW-D56A on CDR media at speed 24X.
please help!!

I tried 3 discs, finally getting it to burn.

Burn CD - Error 2122 - Please Help!

Updated drivers for CDROM, Graphics card, etc. all this evening. No luck. I get an error out right after it checks the files to be burned - Unknown Error 2122, and it ejects the blank CD.
Stats below...thanks for any advice.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
NVIDIA AWRDACPI
iTunes 6.0.3.5
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
LowerFilters: Pfc (2.5.0.204),
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: RADEON X800 Series \RADEON X800 Series
IDE\DiskMaxtor6B120M0_________________________BANC19J0, Bus Type ATA, Bus Address [2,0]
IDE\DiskMaxtor6Y080L0_________________________YAR41BW0, Bus Type ATA, Bus Address [2,0]
IDE\CdRomAOPENDUW1608/ARR_______________________A110___, Bus Type ATA, Bus Address [0,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: AOPEN DUW1608/ARR, Rev A110
Media in drive is blank.
Get drive speed succeeded.
The drive CDRW speeds are: 0.
The drive DVDR speeds are: 0.
The drive DVDRW speeds are: 0.
The last failed audio CD burn had error code 2122(0x0000084a). It happened on drive D: AOPEN DUW1608/ARR on CDR media at speed 0X.

Many of us have posted and experimented and tried everything mentioned here all to no avail in regards to the 2122 error code. And don't let anyone tell you it's YOUR problem--it's not the AOpen drive that's bad-it's that iTunes is NOT working with or doesn't recognize the AOpen burners.... I've gotten a few replies from Apple people and they even say the same thing....
personally I think it's really SAD AND STUPID that this big company can come up with all sorts of new products, pods, nanos etc and yet can't come back and fix the programs for the people that already bought their original products!!!!
HOW HARD can it be to fix a little thing like this??? I don't honestly know -I am not a programmer--but if this many people have complained, wouldn't it be nice if someone would just ADRESS THE PROBLEM??? And then so many of us wouldn't be sitting here fuming, hoping each time they come out with a new upgrade that MAYBE this time it'll work---rather than to be disappointed over and over again and see the same fricking 2122 error....Don't you think fixing something first would be nice instead of just making more newer faster smaller things??

ITunes 7.3 failed back up data DVD burn had error code 261(0x00000105).

Just bought a bunch of new songs and went to back them up in iTunes 7.3 and I keep getting error code 261(0x00000105).
Any ideas? Did not have this problem in prior versions. Brner works fine with other programs.
Thanks!
Home Brew Windows XP Pro

Keep getting the same error as well. Run cd/dvd diagnostics and it should tell you... "The last failed data CD or DVD burn had error code 261(0x00000105)".

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location

DVD Studio burning problem error message: "remove the VIDEO_TS folder from the Build Location"; where is build location?

Thanks Shane I followed your instructions and it turned out pretty well. One quick question, Im working with DVD Studio Pro 4, how do i implement a theme into my project? I cant even fin where thay are located. Thanks.

CD burn had error code 4280, HELP!!!

I installed the latest version of iTunes, but as many other postings I've read, I have not been able to successfully burn a CD with iTunes since the installation. Every time I get the message, "The attempt to burn a disc failed. An unknown error occurred (4280)." I have used Device Manager in the Control Panel to try and update the driver for the CD-ROM, but Windows says it cannot find a better driver than the one I have installed. I also ran CD Diagnostics in the iTunes help menu and the text is attached below:
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
VIA Technologies, Inc. KM266A-8235
iTunes 6.0.2.23
CD Driver 2.0.4.3
CD Driver DLL 2.0.3.2
UpperFilters: GEARAspiWDM (2.0.4.3),
Video Driver: S3 Graphics Inc. Savage4\S3 Compatible Display Adapter
IDE\DiskST3120026A_____________________________8.01___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomCD-ROMCMD5X11__________________________1.06___, Bus Type ATA, Bus Address [0,0]
IDE\CdRomTDKCDRW121032A_________________________1.00___, Bus Type ATA, Bus Address [1,0]
If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is administrator.
D: CD-ROM CMD5X11, Rev 1.06
Drive is empty.
E: TDK CDRW121032A, Rev 1.00
Drive is empty.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive E: TDK CDRW121032A on CDR media at speed 12X.
PLEASE HELP ME!!!!!!!!!!!!!
AMD Sempron 2200+, 1.49 GHz, 256Mb RAM Windows XP CD-ROM Drive = TDK CDRW121032A, Driver Version = 5.1.2535.0, Driver Date = 7/1/2001
AMD Sempron 2200+, 1.49 GHz, 256Mb RAM Windows XP CD-ROM Drive = TDK CDRW121032A, Driver Version = 5.1.2535.0, Driver Date = 7/1/2001

bump2.

Burning cd, error 4000

I get really tired of iTunes! When I try to burn a cd I get very often the error code 4000. Sometimes it's possible to burn a cd but more often it fails. Please help me with a solution.

I have the same issue with error code 4000. I have been using iTunes for about a year now and have occasionally had this problem. Now when I try to burn this is all that happens and that is the error popping up while the disc is being ejected. I bought some Maxell CD-R’s in bulk about six months ago and other than the occasional error, they have worked fine. I was still managing to burn discs after I upgraded to version 7.0.2; however, now I am left with this error code even after trying to use different discs. When this error message appeared, I checked the option to force the optical power calibration before burning yet this has had no effect. Still while looking at the DVD/CD diagnostics the report states that I still need to turn this option on. I have not even been able to find this option anywhere under the preferences menu. I attempted to update the ATA IDE bus drivers but I have the current updates according to the manufacturer.
After researching on the internet and reading through these forums, I have now concluded that this is a problem with iTunes and if Apple does not solve this problem, I am going to take my business elsewhere. I do not want to buy a Mac because I enjoy using my PC and having the freedom to buy hardware and software from various manufacturers and if Apple cannot keep the millions of PC users happy with iTunes and Ipod then I guess they do not want our money either.
Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
Gateway 7110GX
iTunes 7.0.2.16
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.1
LowerFilters: PxHelp20 (2.0.0.0), cdrbsdrv (7.5.0.0), ASAPIW2K (6.0.2.0), AFS2K (3.1.21.0),
UpperFilters: GEARAspiWDM (2.0.6.1), incdrm (4.3.23.2), InCDPass (4.3.23.2),
Video Driver: ATI RADEON XPRESS 200M Series \ATI RADEON XPRESS 200M Series
DOT4\Vid03f0&Pid_3c02&DOT4&STOREHPHI11, Bus Type USB
IDE\DiskIC25N080ATMR04-0______________________MO4OAD4A
Could not get bus type for CD, 50. Problem with installation of drive in Windows.
, Bus Address [0,0]
USBSTOR\DiskGenericCF_Reader______1.01, Bus Type USB
USBSTOR\DiskGenericSM/SD/MS_Reader1.00, Bus Type USB
USBSTOR\DiskTOSHIBAMK6021GAS______GA02, Bus Type USB
IDE\CdRomTSSTcorpCD/DVDW_TS-L532A_______________TI51___, Bus Type ATA, Bus Address [0,0]
Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
Current user is an administrator.
E: TSSTcorp CD/DVDW TS-L532A, Rev TI51
Media in drive is blank.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 16 24.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
Force Optical Power Calibration before burn is turned on in the preferences.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive E: TSSTcorp CD/DVDW TS-L532A on CDR media at speed 16X.

Failure to burn CD error message

Everything has been working fine until recently when every CD that is burned only records the first 5-6 songs and then ejects the CD and the message "failure to burn CD error" message is displayed.

I don't think this problem has been "answered". The problem is random. Sometimes I burn with no problem. This morning my first burn worked fine. Then I had 4 failures in a row. Tried changing nothing. Tried changing burn speed. Eventually I am now having a sucessful burn. Thank goodness that it does not ruin the blank but it seems to be increasing in frequency. Why doesn't apple address this problem? I see hundreds of posts with the same problem. Many are archived. Some like this thread claim to answered. But the problem is that, in my experience, the problem comes and goes. Sometimes I have sucess without changing anything after a failure. Today I quit iTunes and when I started it up again it failed once and now its just finished a sucessful burn. I'm burning the same playlist each time of unprotected music but I notice no difference whether I'm burning purchased music, ripped music, downloaded music, aiff, aac, acc protected, mpeg or a mixture of same.
iMac 1ghz g4 Mac OS X (10.2.x)

Burning Finished- Error #-34506

i created movie in imovie, then went to idvd, after about a hour or more of encoding and burning the error message popped up
"Burning Finished" errors were found during the burning process.
the error #-34506 was reported.
i spent a day making this imovie then a slide show in idvd.
any ideas on how to fix this?
thank you

i created movie in imovie, then went to idvd, after
about a hour or more of encoding and burning the
error message popped up
"Burning Finished" errors were found during the
burning process.
the error #-34506 was reported.
i spent a day making this imovie then a slide show in
idvd.
any ideas on how to fix this?
thank you
Hi I had this problem as well. It caused a lot of frustrations especially as I was showing off the ease of my mac to a pc freak!!!
The solution I found (on an earlier discussion was to change the preferences from best quality to best performance ... it worked really well.

Burning Finished Error

ok launched idvd and imported my imovie. and click burn and get this message
"burning finished - errors were found during the burning process"
any idea? jammed to get the movie together for an event and now i'm stuck.

Aloha and Welcome to discussions.
Boy, could be lots of things actually...
I would start by deleting the encoded asset ( Look under "Advanced" in the menu bar).
Plus, be sure to follow the chapter rules:
*Make sure no chapter markers are within two seconds of the start or end of the timeline.
*Make sure no chapter markers are within a transition.
*Make sure no chapter markers are within two seconds of the end of a transition.
Check your JPEG filenames and folder names. Don't use any special characters. Be sure to use only letters, numbers, and underscores, and only one "." Do not use "/" or "." at the beginning of a file name.
Another thought is about the music you used. Is it from the iTunes Store? You may need to burn a CD of the music and import from that.
If you used photos, your iPhoto Library may be corrupt. You could try rebuilding the library or try dragging the photos to the desktop and then into iDVD.
BTW-next time try saving the iDVD project as a "disk image" and use the disk utility or a program like Toast to burn the DVD.
Aren't using an external burner are you?
:)Sue

Cd burn 4450 error

Similar Messages

Maybe you are looking for