CD Burn error messages

I am getting two messages when I try to burn a cd using the burn software that came with the computer. I used this a couple of times quite awhile back but now it is not working. The messages are "burn engine error" and "target disk error". I tried to run the utility to test the hardware from the original install disks but when I try to restart holding down the c key the computer starts up just as it usually does. I don't know if this utility would tell me whether or not my burner is working. Any ideas how to test my burner before I have to drag this heavy thing to the mac repair store? I have tried several brands of cds and several types of files. I also tried two different ways to burn. It creates the image and tries to burn but when it comes to the verify part that is when I get the message. Any ideas are greatly appreciated!
emac 800mhz combo drive   Mac OS X (10.2.x)  

The cleaner / solvent I referred to is what comes with kits sold for cleaning fingerprints and smudges from the CD discs that go into the drive rather as opposed to kits that contain just a lens cleaner disc for cleaning the drive itself. Places like Wal-Mart have combined CD disc cleaner and lens cleaner in one package and you can use the spray cleaner for the CD discs on the lens cleaner disc.
In some cases it has been reported that running Disk Utility> Repair Permissions on the hard drive has helpd, as have resetting PRAM by restarting and immediately holding down the command-option-p-r keys until you hear three seys of chimes, then release the keys. You may need to redo some settings after resetting PRAM (see What's stored in PRAM?). Try these steps (along with another pass or three of the lens cleaner) before you even consider reinstalling the OS.
An Archive and Install Feature lets you reinstall the OS without affecting your existing user data and settings (you should have at least 6 GB free space on the hard drive, preferrablly more). That would be something to try if all else fails. If your Mac is still under warrenty than you can contact an Apple Authorized Service Provider (AASP) and have them check that it's not a hardware issue.
If you (or a friend) have another Firewire-equipped Mac available, you can boot the eMac in FireWire target disk mode to backup your files. An external Firewire hard drive along with a copy of SuperDuper! would be a worthwhile investment when you can.
p.s. You can add useful information such as your Mac model, OS version, CPU speed, amount of RAM, notable peripherals, etc. using the My Settings link in the box on the right of the Discussions pages. --->

Similar Messages

  • Burn error message 261

    I too am getting burn error message when I try to burn my playlists to CD since I downloaded iTunes 5.0. I am burning a MP3 CD and there are only 640 MB to be burned to a 700MB CD. I have gone through all of the iTunes suggested solutions. I have contacted Dell (my OEM) and the manufacturer of my CD-R/RW drive (Samsung). I upgraded the latest firmware for my computer and CD Drive. I still get the same message...burn failed for unknown reason...error message 261. It works in Windows Media. What gives? Is there a fix? Seemingly, quite a few other customers are having the same problem. HELP!Apple is there a fix on the way?
    Here are my diagnostic results:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    iTunes 5.0.0.35
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: AFS2K (3.1.20.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce FX 5200 \GeForce FX 5200
    IDE\DiskMaxtor6Y160M0_________________________YAR51HW0, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSAMSUNGCD-R/RW_SW-252S_________________R954___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SAMSUNG CD-R/RW SW-252S, Rev R954
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 4.
    The drive CDRW speeds are: 4.

    Hello Armando,
    I'm not too sure if I could help you since you're running a Windows machine but if you want some reliable answers, could you re-post your question in the iTunes for Windows forum? I'm sure the people on that forum would help you better. Sorry about that.
    Just FYI, you posted this thread on the iTunes for Mac forum.

  • ITunes won't recognize my CD burner, error message -43 on CD diagnostics

    I hope there is someone who can help me. I am at my wits end with this! I cannot burn any cd's using iTunes--it does not recognize that I have burning capablities. I have tried repairing and reinstalling iTunes, because the very first error message I get when opening iTunes reads like this "The registry settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes". I have done this about 20 times already. Then when I try to run CD diagnostic, this is what I get:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Sony Corporation PCV-RZ22G(UC)
    iTunes 6.0.1.3
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PXHELP20 (2.0.0.0), AFS2K (3.1.21.0),
    UpperFilters: ⿨#Ǚ
    Video Driver: RADEON 9600 SERIES\RADEON 9600 SERIES
    IDE\DiskMaxtor6Y160L0_________________________YAR41VW0, Bus Type ATA, Bus Address [0,0]
    MEMSTPCI\Disk, Bus Type UNKNOWN
    USBSTOR\DiskApple__iPod____________1.62IDECdRomSAMSUNG_CD-ROM_SC-140C__________________A101___, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomSONYDVD_RW_DW-U12A_____________________2.0a___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
    I am really unhappy with this problem, considering that I can use Windows Media Player with no problem whatsoever. Now I have purchased all kinds of music off of iTunes and can't even burn a CD--what a waste of money. I hope someone has a suggestion for me. When I tried to email to the iTunes support they told me they didn't handle this type of problem, and I'd have to call their technical help line and pay whatever fee they charge for calls. Please help! Or else I guess my husband wasted $400 on a video iPod that's worthless.

    Here's my diagnostics:
    Microsoft Windows XP Home Edition Service Pack 2 (Build 2600)
    Sony Corporation PCV-RZ22G(UC)
    iTunes 6.0.1.3
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: PXHELP20 (2.0.0.0), AFS2K (3.1.21.0),
    UpperFilters: ࢸ"� ᆌ0ŘNT AUTHORITY\SYSTEMɀŞ쓠睎঻谘睠谘睠범 Ф
    Video Driver: RADEON 9600 SERIES\RADEON 9600 SERIES
    IDE\DiskMaxtor6Y160L0_________________________YAR41VW0, Bus Type ATA, Bus Address [0,0]
    MEMSTPCI\Disk, Bus Type UNKNOWN
    IDE\CdRomSAMSUNGCD-ROM_SC-140C__________________A101___, Bus Type ATA, Bus Address [1,0]
    IDE\CdRomSONYDVD_RW_DW-U12A_____________________2.0a___, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    Failed loading CD / DVD drives, error -43. Try doing a repair install on iTunes from the "Add or Remove Programs" control panel.
    Thanks very much Toonz.

  • DVD burn error message

    I get this error message when I try to burn a data DVD: "Burning the disk failed because communication to the disk drive failed. (error code 0 x 80020022)
    I am attempting to use the original drive system (Pioneer DVD-RW DVR 104) and it plays CD's and DVD's without a problem. Thoughts? Jim

    just had this problem with a 17" MacPro purchased in Jan 09. Toast Titanium 9 had no problems burning the CD. tried it again in Finder but backed the burn speed down from 24x to 8x - no problem.
    I can only assume it is cheap media causing the problem - we have no problems with Maxell CDs at full burn speed (24x). The CDs causing the problems are Verbatims (rated at 1-52x) that have printable surfaces.
    hope this helps

  • G5 DVD burner error message? Help please?

    I get this error message when I try burning a 1gb quicktime movie to dvd on my pre installed standard burner. Thanks in advance
    the link below is a screenshot of the error
    http://www.darkstargraphics.com/dvd_message.gif
    Im at a loss and ready to by another
    below is the dvd burner profile
    PIONEER DVD-RW DVR-106D:
    Firmware Revision: A606
    Interconnect: ATAPI
    Burn Support: Yes (Apple Shipped/Supported)
    Cache: 2000 KB
    Reads DVD: Yes
    CD-Write: -R, -RW
    DVD-Write: -R, -RW, +R, +RW
    Burn Underrun Protection CD: Yes
    Burn Underrun Protection DVD: Yes
    Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
    Media: No

    The error "internal target failure" appears on PCs using this drive as well, so it appears that it's not a Toast specific error.
    However, in my browsing, no one seemed to be able to tell if it was a true hardware failure of the drive, or if it was caused by poor quality media.
    I'd try other brands of media and a lens cleaner before flashing the firmware. And, if you do decide to flash the firmware, the current, official firmware for that drive is here. The link in MLCinma's post contains hacked (region free) firmware and is outdated in any event.
    Let us know what brand of media you're using and what speed you're burning at.
    The DVR-106D has had lots of reports of failures, so it could very well be the drive. At least a replacement DVR-111D will only cost you about $40 - $50.

  • DVDSP Build and Burn Error message

    I am new to DVD Studio Pro and came across a problem during the build and burn process.
    When I try to build/format or build, I get an error message that says:
    Language codes for "English" and "English-2" must differ. Build cancelled.
    I am not sure what to do. Does any one know what this means?
    Thanks

    You made another language by mistake. Go to to the bottom of the outline and delete "English-2" and re-build.

  • CD-R burn error message

    I get an error message that says iTunes can't burn the playlist because of Medium write error on CD-R disc of various brands, But it works with printable CD-R just fine. I am using iTunes version 10.6.3 (25). Worked fine prior to this week!

    Hit Command + Option + esc on your keyboard and force quit iPhoto. I'm sure it just got stuck talking to your optical drive.
    Hope it helped

  • CD Burn error message

    MacBook wii not burn CD and opens Error Message.  I went to system profile, then to cd disk, then to system preferences to set window to open iTunes for cd disk drive.  Fixed. :)

    It means that your burner could not write to the CD.
    You can try another brand CD.
    You can select a slower burn speed in the "Burn Disk" dialog box. Some people have trouble using "maximum possible" and a slower speed helps.
    You can try a CD/DVD lens cleaner disk and see it that helps.

  • Burn error message 4261

    Hello, I cannot burn in iTunes. After the third burn, it says "Unknown Error Occurred 4261".
    I have looked this up in the forum and tried several of the fixes that were listed and it is still not working. I used to be able to burn, now can't.
    Any suggestions??? Thanks
    Here are my diagnostics:
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Inc. OptiPlex GX620
    iTunes 7.1.1.5
    CD Driver 2.0.6.1
    CD Driver DLL 2.0.6.2
    LowerFilters: PxHelp20 (2.0.0.0), DRVMCDB (1.0.0.1), DLACDBHM (1.0.0.1),
    UpperFilters: GEARAspiWDM (2.0.6.1),
    Current user is an administrator.
    Video Display Information:
    256MB ATI RADEON X600
    256MB ATI RADEON X600 Secondary
    Connected Device Information:
    DiskDrive, SAMSUNG HD160JJ/P, Bus Type ATA, Bus Address [0,0]
    CDROM, HL-DT-ST DVD+-RW GSA-H21N, Bus Type ATA, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    D: HL-DT-ST DVD+-RW GSA-H21N, Rev A105
    Audio CD in drive.
    Found 17 songs on CD, playing time 73:18 on Audio CD.
    Track 1, start time 00:02:32
    Track 2, start time 03:00:07
    Track 3, start time 06:37:45
    Track 4, start time 11:33:55
    Track 5, start time 15:21:55
    Track 6, start time 20:02:12
    Track 7, start time 28:42:60
    Track 8, start time 31:39:37
    Track 9, start time 35:12:05
    Track 10, start time 38:58:30
    Track 11, start time 42:41:25
    Track 12, start time 46:28:52
    Track 13, start time 52:07:57
    Track 14, start time 55:28:52
    Track 15, start time 60:00:10
    Track 16, start time 64:13:22
    Track 17, start time 68:33:22
    Audio CD reading succeeded.
    Get drive speed succeeded.
    The drive CDR speeds are: 8 10 16 40 48.
    The drive CDRW speeds are: 8.
    The drive DVDR speeds are: 8.
    The drive DVDRW speeds are: 8.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4261(0x000010a5). It happened on drive D: HL-DT-ST DVD+-RW GSA-H21N on CDR media at speed 16X.

    Had trouble posting entire message first time. Here goes again.
    I got an Error 4261 message on my computer some months ago while attempting to backup my iTunes music ---about Dec. 2006. Hopefully, the problem is now solved. This was a difficult and time consuming issue to resolve. I shall provide some details of this resolution (worked for me) as I know some others are having the same problem. I hope to post this message to others with 4261 errors.
    I have a Dimension E510 computer bought in 2006. I am using Windows XP. My CD ROM burner is as follows: HL-DT-ST DVD +-RW GWA4164B. I wonder if you have the same type CD ROM.
    At first, several thoughts came to mind. Google? Never listen to music again. Invest in a sledge hammer? I decided to try and fix the problem and would work on this for the next eight months. Recently, I decided that this problem had to go away. I tried various things to correct the problem often with technical assistance as the following indicate:
    Changed copy speed//Did a restore on my computer (no help)// reversed restore
    Updated iTunes files//Did virus scans
    Contacted a company techie—Discovered my warranty was still good. Cdrom driver was updated. We got the iTunes program to copy a disk. Problem solved?? Time passes.
    The problem reoccurs. I contacted a techie again. He was able to get another program to copy on the cdrom I was using to copy iTunes music. I was told that I should contact an iTunes rep. $$. (One can save files (ex. photos) to a new file created on the desk top and copy them to a cdrom---a test method used.)
    I read suggestions about updating my BIOS and chipset on the iTunes message board. Not being a techie I wasn’t so sure about this. Time passes.
    I didn’t buy music.
    I read messages saying that I should backup my iTunes music.
    Called techie again. Updated cdrom driver. We were able to copy data using the same cdrom used for the iTunes copy. (Again this was not a fix. It was indicative of an intermittent cdrom failure occurring over time, and one manifesting itself in iTunes.) I asked him to try to copy another. Amazingly, this copy failed. Something was wrong. Now we’re getting somewhere. Techie eliminated select startup files to try to determine source of a software error, if one. This did not fix the problem.
    Techie deleted a couple registry files. (I don’t like deleting registry files because they serve a valuable purpose, but I’ not a techie. Later I would have to do a file repair on iTunes and a photo program. iTunes has a repair feature which was on my desktop—a holdover from a previous attempt to fix things with an iTunes update. I ran this without harming my music files, and this repaired the program.)
    Techie said I may have a problem with my current brands of CD-R disks. I bought and tried other brands---four all total. This did not work.
    I happened to attempt to copy some pictures as I was interested in having some developed. To my surprise, my computer stopped the copy citing an error with the copy process. The problem now manifested itself with another software program. Heretofore, I could successfully copy pictures using the same cdrom but not iTunes music.
    I called the techie again. I told him what I had done and new error in copying other files to the cdrom. We attempted to use other programs to copy music and picture files on the cdrom. (My thinking is, if they had worked, then the cdrom was OK, and the problem was a software problem and likely involving iTunes.) We could not get any software programs to copy files to the cdrom in question. This was a clear indication that the cdrom was defective. We likely used up ten CD-R disks in these latest attempts.
    Looking back, there was a subtle indication of a problem with the cdrom. There was a problem with one of the songs I had copied to a new disk (No. 24 of 24 songs on a disk). The song was copied with errors. This shouldn’t happen.
    The company replaced cdrom free of charge the next morning. Wow!
    I tried the new cdrom and began burning iTunes music right away. No 4261 error message. I also copied pictures to the same cdrom without any error messages. I also successfully used other brands of CD-R disks.
    Replacing the cdrom on my computer fixed the 4261 error on my computer. I hope something here will be of help to some of you who have the same problem.
    As I mentioned earlier I had problems with iTunes and a photo program after cdrom installation but fixed them. I also experienced problems with Windows Media Player and Roxio/Sonic. They didn’t want to recognize the new drive (E:). Restore made things worst so I undid this. I spoke to a tech again about these issues as I wasn’t certain of the scope/nature of problem. We updated both programs with updates from company support pages. This seems to have fixed the problem. Point made here was the need to keep files updated with the latest and greatest. Having had Windows ME in the past, I was reluctant to change my files too often. Now I have no choice but to do this. Many thanks to Techie.
    The thought in my mind now is whether performing updates and specifically on Windows Media Player would have fixed the error to begin with. I don’t know, but I did run an update on my iTunes, and there are no updates for my photo program . Looking back I would have tried the updates first before I replaced the cdrom.
    Kindest regards. 08/13/07

  • Burning error message please help.

    I have a disc image I created and I burned it successfully the first time I tried it. Now everytime I try to burn the same disc image I am getting the below error message. I don't understand how it could have burned the first time, but now I have 12 unusable DVD's. I am burning at 1x speed. Any help would be great.
    Thanks,
    Doug

    Strange...
    Can you play the disk image with your Mac with Apple's DVD Player application (you have to double-click on the image to mount it to play it)?
    Was the disk image created in iDVD?
    You also might try 2x or 4x burning.
    What kind media DVD-R or DVD+R) and brand are you using?
    F Shippey

  • Dvd burner error message "device failed to calibrate laser power"

    When I try to burn a dvd, I get an error message:
    The disc can’t be burned, because the device failed to calibrate the laser power level for this media.
    and then it spits out the disk. This has never happened before.
    Advice?

    If Wjosten's suggestion does not work, clean the dvds - http://docs.info.apple.com/article.html?artnum=50448 or use another dvd brand - Verbatim, Maxell or Taiyo Yuden are highly recommended by Mac users.

  • Backup iTunes library problem using LaCie DVD Burner error message - help!

    Hi!
    I just purchased a LaCie D2 DVD +-RW DVD Burner for my Mac Mini running OS 10.4.8 and iTunes 7.0.2. I've installed the latest LaCie drivers and iTunes recognizes the burner so no problem there. When I try to back up my purchased playlist iTunes checks the media everythings fine but when it tries to start the burn process I get this error message: "The attempt to burn a disc failed. An unknown error occurred (-8785)." It then ejects the DVD-R. The Burner works fine with Toast, so the issue is with iTunes. I've tried using both Apple DVD-R's and Sony brand just in case that was it. Any ideas? Please?
    Thank you,
    Sam

    i recently got an error message while burning a dvd with lacie. i had been using the same cd's etc. found the solution on roxio boards (which don't allow just anybody to join obviously).
    the problem is iSight. it can cause problems with the lacie while hooked up to the other firewire connection. unplugged the camera and viola!!! lacie works again.
    hope this helps you too!!!
    dizzer

  • Burn error message 4200?

    Ok, so not a new question as there are several posts similar to mine. I have been getting the following error message:
    Attempt to burn disk failed. Unknown error occurred. (4200)
    This error i got when trying to burn a disk immediately burning another disk. The first disk burned no problem. Tried to burn the next cd and it failed. Help??
    Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
    Hewlett-Packard HP Pavilion dv1000 (EH438UA#ABA)
    iTunes 9.1.1.12
    QuickTime 7.6.6
    FairPlay 1.7.16
    Apple Application Support 1.2.1
    iPod Updater Library 9.0d11
    CD Driver 2.2.0.1
    CD Driver DLL 2.1.1.1
    Apple Mobile Device 3.0.1.3
    Apple Mobile Device Driver 1.46.0.0
    Bonjour 2.0.1.2 (214.3)
    iTunes Serial Number 95C43F12B3B76AF6
    Current user is an administrator.
    The current local date and time is 2010-06-04 16:32:03.
    iTunes is not running in safe mode.
    Video Display Information
    Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
    Mobile Intel(R) 915GM/GMS,910GML Express Chipset Family
    ** External Plug-ins Information **
    No external plug-ins installed.
    Genius ID: 01322ffe14b12e55bd115611271d245f
    iPodService 9.1.1.12 is currently running.
    iTunesHelper is currently not running.
    Apple Mobile Device service 3.0.1.0 is currently running.
    ** Network Connectivity Tests **
    Network Adapter Information
    Adapter Name: {D2D7B34F-E0B6-4C0D-A2DC-D1E2258DF729}
    Description: Broadcom 802.11b/g WLAN - Packet Scheduler Miniport
    IP Address: 192.168.1.9
    Subnet Mask: 255.255.255.0
    Default Gateway: 192.168.1.254
    DHCP Enabled: Yes
    DHCP Server: 192.168.1.254
    Lease Obtained: Fri Jun 04 16:09:52 2010
    Lease Expires: Fri Jun 04 17:09:52 2010
    DNS Servers: 192.168.1.254
    192.168.1.254
    Adapter Name: {33FA1701-D833-4E06-A0B4-F77406C661C4}
    Description: Realtek RTL8139/810x Family Fast Ethernet NIC - Packet Scheduler Miniport
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Default Gateway:
    DHCP Enabled: Yes
    DHCP Server: 68.87.74.32
    Lease Obtained: Thu Feb 15 19:51:53 2007
    Lease Expires: Mon Jan 18 22:14:07 2038
    DNS Servers:
    Active Connection: LAN Connection
    Connected: Yes
    Online: Yes
    Using Modem: No
    Using LAN: Yes
    Using Proxy: No
    SSL 3.0 Support: Enabled
    TLS 1.0 Support: Enabled
    Firewall Information
    Windows Firewall is off.
    Connection attempt to Apple web site was successful.
    Connection attempt to iTunes Store was successful.
    Secure connection attempt to iTunes Store was successful.
    Secure connection attempt to iPhone activation server was successful.
    Last successful store access was 2010-06-04 11:23:47.
    ** CD/DVD Drive Tests **
    LowerFilters: PxHelp20 (2.0.0.0), Cdr4_xp (8.0.0.212),
    UpperFilters: Cdralw2k (8.0.0.212), GEARAspiWDM (2.2.0.1),
    D: HL-DT-ST DVD-RW GWA-4082N, Rev CC15
    Media in drive is blank.
    Get drive speed succeeded.
    The drive CDR speeds are: 10 16 24.
    The drive CDRW speeds are: 10.
    The drive DVDR speeds are: 10.
    The drive DVDRW speeds are: 10.
    Force Optical Power Calibration before burn is turned on in the preferences.
    The last failed audio CD burn had error code 4200(0x00001068). It happened on drive D: HL-DT-ST DVD-RW GWA-4082N on CDR media at speed 24X.

    I'm in the same issue and haven't been able to find a suitable solution either.

  • Burn error message

    Hey all.
    I'm trying to burn a CD on my computer and after several attempts I am presented with a message which says "Error 4450". I'm annoyed 'cause I've got through 4 CDs in my efforts. I've also followed the instructions on the website "Download new version of iTunes" and still it's happening. Any ideas of what is going on?
      Windows XP  

    The disk i'm trying to burn onto is a 16X speed.
    16X media would be MY guess. Try to find 4x or 8x max medium. The slower the better in terms of burning success.

  • Data DVD wont burn - error message

    Dear Macsters,
    Everytime I try to burn a data dvd, i immediately get this message:
    BURN
    sorry, the operation could not be completed because an unexpected error occurred (Error code 0x8002006D).
    It only does this when i set the burn at 1x. At 2x it burns.
    I have osx 10.4.8, early g4 17" laptop, superdrive (dvd-r only).
    Is this a burner problem or a software problem??
    Daniel

    Manually setting the burn speed on some applications can be problematic.
    If it burns at 2X then my guess is thats what you need to do. Burn at 2X.
    http://docs.info.apple.com/article.html?artnum=303599
    Cheers Don
    Oh one other thing, older burners are very picky about media.
    I suggest you use the very best media, rather than bargin basement cheap media.
    http://www.digitalfaq.com/media/dvdmedia.htm
    Don

Maybe you are looking for