CD burner plugin downl

I downloaded the cd burner plugin from Creative but when I tried to run it, I received message from Install Shield Wizard "unable to detect a supported product on your system". Listed below is what I have installed on my computer, maybe someone can tell me why I'm having this problem.
Creative MediaSource Player version 3.30.35
CDRW dri've HL-DT-ST CDRW/DVD GCC 4482 (supported by NTI)
Sound Card Sound Blaster Audigy Advanced HD audio Revision .00
Any info would be greatly appreciated... Thanks

I'll try to explain..Prior to trying to run the cd burner plugin, I'd been using the MediaSource player for weeks with no problems at all.. After trying to run the plugin a couple of problems seemed to occur, (st) while trying to create playlists I would get an error message stating that the program must shut down, this happened several times within about an hour.. (2nd) I turned my computer on today and discover that almost all of my MP3 files were no longer in my MediaSource library (about 4000 of them). I had to re-install them... I think my problems listed above are related to trying to run the plugin but I'm not sure. Any thoughts as to what else may be causing the problems? Hope you can understand my ramblings. Thanks....

Similar Messages

Sudden "unsupported image format" after using Dodge & Burn Plugin

After using Dodge & Burn plugin for first time (seems great) one of the images suddenly turned into "unsupported image format" in Aperture. Just happened to one but its a critical one so I need to figure it out. Any thoughts?
Thanks - Robert robert (at) robertholland (dot) com
<Edited by Host>

scott nichol wrote:
if you keep the console open when you're editing these photos and the "unsupported image format" message comes up, you'll notice that Aperture is throwing malloc errors on the console. this means that while its trying to load the image, it is running out of RAM. the core problem here is that Aperture can't address more than 2GB of RAM and i think the only way that Apple can address this problem is by moving to a 64-bit version of Aperture. it would be really nice if this issue was addressed in a 2.2 release sometime soon as this happens to me all the time now after round-tripping an image to Photoshop.
i would not expect to have to quit and restart a professional photography application every time i finish editing an image.
Good to know. But I don't expect a .2 upgrade to be 64bits, a next major version of Aperture is more likely to be 64bits (Aperture 3), considering AP 2 is at the end of its development cycle and a new major release is due before summer.

Creative CD Burner Plugin 5.01

Hello,
I've been trying to update my Creative Organizer(5.0.38) to the Cd Burner Plugin 5.0.3 for awhile now, but it always stops, saying, "Setup is unable to detect a supported product on your system". I have a muvo n200(micro). I've tried updating with the n200 connected & tried without it connected, but to no avail. What should I do to get the updated installed? Thanx in advance.
MIKE

I'll try to explain..Prior to trying to run the cd burner plugin, I'd been using the MediaSource player for weeks with no problems at all.. After trying to run the plugin a couple of problems seemed to occur, (st) while trying to create playlists I would get an error message stating that the program must shut down, this happened several times within about an hour.. (2nd) I turned my computer on today and discover that almost all of my MP3 files were no longer in my MediaSource library (about 4000 of them). I had to re-install them... I think my problems listed above are related to trying to run the plugin but I'm not sure. Any thoughts as to what else may be causing the problems? Hope you can understand my ramblings. Thanks....

Dodge and burn plugin, how good is it?

Can some of you that are using the new dodge and burn plugin share some of your experiences. In the tutorial it looks pretty basic, direct and easy to perform. Also it seems pretty close to what I've been doing for the last 25 years in my b/w darkroom. I wonder if someone can say something about it's performance and the results, also on black and white images. How good is it? Could I leave PS out of my workflow as far as this tool is concerned? Thanks.

I've used this plugin many times and really like it especially for knocking down a distracting part or all of the background. I haven't used it so far on B&W images although I shoot quite a bit of B&W. I've found a couple of things - (1) be very careful about the strength setting because at 100% it's dead black and (2) I tend to use the Feathering once I've got my dodge or burn about where I want it. I'll open the brush size and with about a medium strength I'll "dust" the whole area I've worked. The feathering seems to blend everything so you don't have any harsh spots. The feathering does tend to add a small amount of "dodge" to what you've done so you may have to go back and redo the area(s). I would liken this to using a "pantyhose frame" rather than a paddle in the darkroom days. You remember that trick I'm sure. I don't have any reason to believe it won't work as well on B&W. I have found the eraser can save some work if you get a little heavy on the strength setting. Finally, I tend to take a long look at the work in full screen before I hit the save button - although you can go back into the Edit with Dodge and Burn and redo areas until you get what you want. Play with it and I think you'll agree it's a valuable tool.

Where is the dodge/burn plugin?

sorry guys i realise I'm probably being blind
where/how do you access the new plugin?

Besides being able to edit with Photoshop (or another external editor of your choice), you now have the choice of Dodge & Burn as well. So, you choose it from this location and not the adjustments panel.

Dodge and Burn plugin

I have Aperture 2.1.3. Should I have this plugin? If I should, I don't. Is there a place to download?
Thnx.

answered

Anyone Know Of A Free "Ken Burns" PlugIn For FCP HD?

Any Suggestions would be helpful. Thanks!

Jim:
Was it you who referred me to a link for a plug-in for about a hundred bucks (cheap price to pay, IMHO) that brought drag-and-drop simplicity for this feature to FCP?
I have a lot of this to do, but I failed to bookmark your post (if it was you), and I would SORELY love to buy the program now. It was called Photo* something.
The way I've gone is hand keyframing on each still, and it just takes a lot of time.
Should I don protective clothing myself? What sort of weapons are we using? Is this like the Uma Thurman thing in Kill Bill where she rips out the only remaining eyeball of her vicious opponent?
They've banned Halloween at my kids' local school in Newton, MA. I'm sorry if I sound crabby.
Thanks for help or pointers; I don't want free stuff. I'm happy to pay people for the intense and serious work they do to make my life and work easier.
Joel.

DVD burner help

Hi I bought this DVD burner And I just recieved it today but little did I know that its not compatable with my computer -_-. The plugins in the back aren't the same one as my computers. The one I bought has like "sata power and Sata Data" on the back and the plugin is significantly smaller. The plugins on my computer are the large ones that take up almost the whole length of the DVD burner. Sorry for the horrible descriptions. Is there some type of converter I can buy (perferbly at best buy) that can convert the burner plugins I bought to the ones I need for my computer? I really hope thats possible.

You could install a PCI SATA controller like this one here:
http://www.bestbuy.com/site/PNY+-+2-Channel+SATA+II+RAID+PCI+Card/8552327.p?id=1188562133392&skuId=8...
It allows connection of these devices for computers without these ports.
So yeah, all you need is a PCI SATA Controller Card and you will be all set. You might want to pickup longer cables, too if it does not reach between the drive and the card.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Dodge and burn tool

Well I have used the tool a couple of times and I just opened my aperture, and its suddenly gone...any reason why? Thats kind of weird

Never heard that one before. The dodge and burn plugin is actually part of the package in the applications folder so it's kind of hard to nuke it w/o blowing away aperture itself.
Hmmm, that is weird. I'll take a poke around and see if I can break it on purpose and get back.
RB

Creative MediaSource doesn't have the Burn opt

I recently bought a new Dell desktop. And with it came Creative MeadiaSource. I went to burn a CD and there wasn't that option. So I looked under the Help to make sure you could, well it shows a picture of a CD with a little flame and it says Burn. Is there a way to get my MediaSource to have the burn option?
<IMG src="http://i5.photobucket.com/albums/f392/xdarkxcloudx/CMSToolbar.jpg">

I don't know what player you have but you can get the CD Burner plugin from the downloads page for most of the Creative players such as Muvo Micro or Zen Micro.
Go to Support->Downloads and choose your player or one of the ones I've listed.
When you get to the downloads page look for Creative MediaSource Plugin for CD Burner 3.0.8
If you haven't got a new enough version of MediaSource you can get that there as well.
PB

Burner plug_in for media sourc

Hi,having recently upgraded to m/s5 I downloaded the latest plug-in for the burner ( why is this not included in the download ? )but during installtion I am told ` set-up is unable to detect a supported product on your system .`
can anyone help with this problem , I am fed-up changing programs to burn a disk but cannot get help from Creative as this is not a product purchase .

The CD Burner plugin is available only to certain Ceati've product owners only.

HELP!!! when i try to burn an audio cd using mediasource 5

i get this error message that says something?along the lines of:?c++ runtime error?ctcmsu.exe has caused the program to terminate?i have a blank cd-r in each time and it recognizes it but when i click "burn now" the message comes up everytime?i tried reinstalling the program from the installation cd-rom?and the burner plugin but it keeps coming up and?it is BEYOND fustrating at this point :angry:?any help or info would be much appreciated!! thanks

The latest available for download is v5.0.38. Creative MediaSource 5 and its various plugins are now officially available for download at your respecti've product download sites. The main Creative MediaSource 5 Player/Organizer:
Creative MediaSource Player/Organizer 5.0.38 (22 Dec 2006)
For CD Burning function:
Creative CD Burner Plugin 5.0.3 for Creative MediaSource 5 Player/Organizer (22 Dec 2006)
For mass storage series ZEN/Muvo players:
Creative Music Player (Mass Storage Series) Plugin 5.0.07 for Creative MediaSource 5 Player/Organizer (22 Dec 2006)
For PlaysForSure ZEN players:
Creative PlaysForSure Devices Plugin 5.00.36 for Creative MediaSource 5 Player/Organizer (22 Dec 2006)
For non-PlaysForSure NOMAD/ZEN players:
Creative ZEN and NOMAD Jukebox Plugin 5.00.22 for Creative MediaSource 5 Player/Organizer (27 Dec 2006)
For selected DTS supported Sound Blaster cards:
Creative DTS Neo:6 Plugin 5.00.05 for Creative MediaSource 5 Player/Organizer (22 Dec 2006)

Burn Using Mediasou

I want to use mediasource to burn a cd. There is no burn icon so i downloaded the plugin off the support page. But when I try to install it i get an error saying "setup could not detect the minimum version of media source required". The version of mediasource i have is 5.0.38?Does anyone know why I am getting this error message?

The one I downloaded was:?Creative CD Burner Plugin 5.0.3

Re: Way to burn a recording from Nomad to a

Hello to all, okay get ready this might sound confusing and is long but hopefully someone can help me out. I have a Nomad Jukebox 3 and I take it to concerts which permit taping of the show and so I record the show via the optical input. With Creative Media Source I am able to bring the recording into PC Music Library. Okay so that's cool.
My problem is how do I take that recording from the PC Music Library and bring it to say my C Dri've to the folder My Music in My Computer? You see when I try to retrieve the Line Recording from PC Music Library, its sounds confusing, and I don't know if this is the case, but I when it saves in PC Music Library that is the music library for media players. Can you take that music and move it into a diff. folder in a diff. location for say on my C Dri've? Okay, so with that said basically I'd like to know how I can burn the recording from my Nomad Jukebox 3 onto a CD... I know there is a way how, it's just how to do it... Thank you, and sorry if my wording and explanation sounds confusing...

In MediaSource's PC Music Library, right click on the track and select Properties. You should be able to see the location of the file in your hard disk. By default, it should be under "C:\Documents and Settings\YourName\My Documents\My Music\".
To burn the file to a CD, try to see whether your version of MediaSource has the CD burning plugin. To check that, click the double arrow button at the bottom right corner of MediaSource Organizer to open up a right panel. At the top of the right panel, there is a dropdown arrow that you can click. Check whether there is Burn CD item there. You can choose to burn into a MP3 CD or an audio CD.

[SOLVED] Rhythmbox: Unable to activate plugin Audio CD Recorder

Hi,
I'm trying to use Rhythmbox on my EeePC. The laptop not surprisingly does not have an optical drive. When I'm starting Rythmbox, I always get an error:
Plugin Error: Unable to activate plugin Audio CD Recorder
I tried the obvious: check the Edit/Plugins tab, but couldn't see any Audio CD Recorder plugin at all... Does anyone have a hint how to get rid of this message? It's pretty annoying every time when I start the program.
Cheers!
Last edited by imrehg (2009-05-11 03:25:58)

Asked the gnome guys about it in this bug report, but they tell me that even if the Audio CD Recorder is a plugin is a plugin, it is not, so it's not listed in the plugin list because no sane person would want to turn it off, but if I want to turn it off I should use gconf.....
Is it just me, or does it really not make sense not to be able to turn off a plugin?
Okay, that might be a philosophical question (and I almost started to like gnome, but not very sure anymore), from the practical side there are other issues...
I poked around a little bit, and the problem is that the cd-burner plugin is compiled with brasero dependency, but i don't have brasero. It is listed as an optional dependency, but if I don't install it (on the Eee every MB counts...) then there's this error every single time. In the bug-report they say that i can turn it off somehow with gconf, but being an XFCE user, I'm not sure about that, and it seems I have to install some extra software for that as well...
So what would be possible solution:
1) recompile package every time for myself from ABS
2) install brasero and live with it
3) try to figure out gconf under xfce
4) figure out how to package rhythmbox differently, seprating core and plugins so that there are no broken dependencies...
Personally: 2 and 3 are very much "do not want". The 1 - if have to then it will happen. The best would be 4, though at the moment I don't have a good idea how should that one work, not to break other people's system... But it seems I'm not the only one with this problem either, so fixing this would make sense....

CD burner plugin downl

Similar Messages

Maybe you are looking for