Cd burner will not verify disk

My cd burner will burn but it won't verify the disk. I tried 4 times with no success, even bought new cds to try--still didn't work

Not sure why you're using a CD burner to verify the disk.
You need to launch Disk Utility located in HD > Applications > Utilities to verify the startup disk on your Mac.

Similar Messages

  • Disk Utility will not verify disk because, "The underlying task reported failure on exit."  Now what?

    Disk utility will not verify disk because, " The underlying task reported failure on exit."  The "repair disk" button does not light up.  The report says that repairs need to be made to the hard drive.  I have already checked permissions.  What do I do next to get the repair process started?  Also, I cannot find a defragmenting drive option in Disk Utility.  Doesn't it exist?

    You need to boot from the install DVD (or a clone of your internal) to run Repair Disk. Repair Disk will be grayed out, dimmed, because you can't repair from the same volume you are booted from.
    EDIT: No, you do not yet need to use Disk Warrior or Tech Tool or do any reformatting. These steps might become necessary only if Repair Disk fails.
    Unless you have very large video files, for example, there is no need to run any defragmenting utility. OS X does it all by itself on the fly.
    Try Disk Utility
    Start from your Mac OS X Install disc: Insert the installation disc, then restart the computer while holding the C key.
    When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
        Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    Click the First Aid tab.
    Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    Select your Mac OS X volume.
    Click Repair. Disk Utility checks and repairs the disk.
    If you don't have the install DVD, try a Safe Boot. Hold the Shift key down at startup and give it much more time to boot than usual. It's trying to repair the drive directory.
    Message was edited by: WZZZ

  • Warning: SUID file ?? also my disk will not verify storage??

    Warning: SUID file ?? also my disk will not verify storage??

    True I Dont need to do so many (so to speak) But I use my system mainly for audio production and I always have some new update, plug-in, or this or that I am doing to my system. And In all fear and respect for the ghost bugs computers sometimes get, , I always do repair perm after any update or maintenance, and , so far, knock on wood, My systems for the past 5 years have been trouble free

  • How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

    I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
    Two things:
    1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
    2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......".  I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
    Obviously it will fit.
    What am I doing wrong, all of a sudden?

    Hey ryclark,
    Thanks for responding. Something else is going on here.....
    Here's what I re-replied to our friend...
    Thanks for the response.
    When I built this computer last Nov/Dec, it was built with the second 
    fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's  running
    Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard 
    drive space. It is set up with 64 bit. I had been using Audition CS3 for  many
    years and even go back to it's origin: Cool Edit and Cool Edit Pro. My 
    learning curve was minimal, sans the CD burning, which I used other software
    for  which is now antiquated, so I need Audition for this. Between this and 
    IZotope 3 I've repaired and improved many a recording. All-in-all extremely 
    useful software.
    As for the idea "to burn it anyway", well the error message comes up and 
    that's it - if I "X" out of that message and try to burn again the message
    comes  back  - so Audition will not let me. It is convinced that this file is 
    longer than it really is, but only when I add track  marks to it!
    There are only 11 tracks.
    I was able to burn a CD of this same file but without all the track marks, 
    so the same exact file length/size will burn, only as the one track.
    I've also succeeded in burning other WAV's , both greater and smaller, with
    and without multiple track marks, without issue. Of course all with less 
    than the CD's max. capacity.
    This problem seems to be with this one file. I've even  re-made/re-recorded
    the file from scratch with no change. There's something else  going on here
    that I can't put my finger on. (I am "recording" LP's and making  personal
    CDs of them)
    Also, only from time to time, I have another error after burning a CD that 
    states it could not verify the CD. For this I assume it is the blank rather
    than AA? The first might burn without issue and with the second burn I 
    get the error. It is near the end of a stack of blanks, so.....
    As for the need to "mark the end" of the file makes a lot of sense but of 
    all the other CD track-marking software I've used, none needed one to do
    this,  but this IS Adobe after all.
    You'd think there might be a smidge of intuitiveness with Adobe, but maybe 
    not.
    - Mark
    In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time, 
    [email protected] writes:
    How  to solve Audition CS6 error "The amount of audio to burn will not fit
    on  the CD........."?
    created by ryclark (https://forums.adobe.com/people/ryclark)  in 
    Audition CS5.5, CS6 & CC - View the full  discussion
    (https://forums.adobe.com/message/6605916#6605916)

  • I have updated my iOS and now my hotmail will not verify my password through apple mail app.  I have reset password - tried new password and old password and it still gives me password incorrect.  Hotmail works fine on Mac.  Has anyone had this difficulty

    I have updated my iOS and now my hotmail will not verify my password through apple mail app.  I have reset password - tried new password and old password and it still gives me password incorrect.  Hotmail works fine on Mac.  Has anyone had this difficulty and been able to resolve it?

    Did you try deleting the mail account, then adding it back?   I've read a lot of times that is what needs to happen in order for it to work properly.

  • I have two Apple ID's associated with my e-mail and Facetime will not verify the one I use.  How can I eliminate the other ID?

    I am running to into a problem using Facetime as I seem to have two Apple ID's attached to my e-mail.  Facetime will not verify my e-mail address because it is associated with the other account.  What can I do???

    Some things are mixed up here, seemingly...
    I seem to have two Apple ID's attached to my e-mail.
    An Apple ID is a valid email address, apparently. How can those be "attached to your email"... what email?
    Facetime will not verify my e-mail address because it is associated with the other account.
    This doesn't make sense. You can register multiple, even non-Apple-ID, email addresses and their aliases with FaceTime.
    So, maybe you can explain your problem better - what you want and the steps you've taken and what you have so far. If something doesn't work, please tell the exact error message, too.

  • HT201320 I am trying to set up an email account on my new ipad. I use ntl. so it is a pop account not imap. When I enter the description as pop3 it will not verify, if I leave it on the default of ntlworld it will not verify. Can anyone tell me what I am

    I am trying to set up my email account on my new ipad. I use ntl. so it is a pop3 account but whatever I put in it will not verify. any help please

    Have a look here  >  http://www.apple.com/support/ipad/mail/

  • I updated to iOS 8 on iPhone 5s and now iMessage will not verify my email. It has said "Verifyng" since yesterday, but has not sent a verification email. I checked my iCloud settings for that email address and it shows "pending".

        I updated to iOS 8 on iPhone 5s and now iMessage will not verify my email address to use to send/ receive messages. It has said "Verifyng" beside it in settings since yesterday, but has not sent a verification email. I have also tried Adding it as a new email address several times, but get the same outcome.  I can still send/ receive texts from my phone number, just not from the email address.
         In my iCloud settings under Contact Information for that email address and it shows "pending".  When I select "Resend Verification Email" I get "Cannot Connect to iCloud".

    Hello, Dorian071.  
    Thank you for visiting Apple Support Communities. 
    Here is the best article to reference when experiencing issues with iMessage activation issues.
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Cheers,
    Jason H.

  • Ken burns will not deselect..

    i am hoping for a quick fix here....but after reading several threads....i doubt that will be the case....my problem is the ken burns will not deselect...i select the clip...i click show photo settings...i deselect ken burns...i hit update...and it seems to re-render....but then when i play it...ken burns effect is still on...agian i check photo settings and sure enough it is selected....i have tried over and over...wasted more hours than i care to admit....project is way late....i have not even begin to get near a burn which sounds like that may be a problem as well...please help!

    chelle - there is a problem with iMovie 6 in that once you empty the iMovie trash you can no longer modify the KB settings on the stills you imported before the trash was emptied. This is because iMovie strangely, trashes the original un-modified photo after the effect has been added. In order to be able to modify the setting later, it is necessary to open the trash and drag the stills back to the Clips Pane.
    If this is what has caused your problem, you may have to re-import the photos again.

  • My apple id and password will not verify

    I am trying to turn on the iCloud service.  The ID and password will not verify.  The correct information is entered.  Ultimately I am trying to back up my phone to the cloud (I was unable to back it up to my PC)  Thanks

    Try:
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems

  • Yahoo account will not verify

    i keep entering my password to setup my account and it say yahoo server down and will not verify. it is the correct password and i have set up the account a few times

    I am having the exact same problem, my verizon email on my iphone has worked for months without any problems and all of a sudden since this morning it has problems SENDING mail. I don't know if this is a verizon related issue or not but I checked the system status on their site and they dont seem to be having any problems. I have no trouble RECEIVING mail, the problem is with SENDING mail and i have not changed any email settings whatsoever on my phone in fact i havent even been into the email settings option in months so I don't know what is going on but I will be tracking this thread, if anyone who has verizon has any ideas or suggestionsor solutions please do tell, I will be updating this thread accordingly once I find anything new to report.

  • Powerbook will NOT eject disks

    I know there are many threads on this subject: but it seems this Powerbook has a very strange problem as it will NOT eject disks.
    IT IS NOT A SOFTWARE MALFUNCTION
    I have opened up the unit and gently pushed a thin knife inside the front section of the superdrive itself, and it seems there is some kind of catch that has come down and stuck at the front. About 20mm wide, making it impossible for the DVD in the drive to be ejected.
    Is there some weakness in a component part that causes this?
    Any help greatly appreciated.
    C Marks

    Here's some reads on the subject:
    http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh1750.html
    http://support.apple.com/kb/HT3064?viewlocale=en_US
    http://www.macyourself.com/2009/05/01/the-ultimate-guide-to-ejecting-a-stuck-dis c-from-mac-superdrive/
    http://www.silvermac.com/2006/dvd-stuck-in-macbook-pro/
    However, I have heard that if you turn your Mac off and leave it off overnight, the stuck arm may retract on its own. I think the arm is there to prevent you from inserting another disc if there is already one in the drive, but apparently it can get stuck.
    Here's hoping something here will help.
    Good luck!

  • Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

    Can not get email after updating to 8.1.1! Deleted account and now cannot add as will not verify due to Apple something timeout messages? Any one else having problems?

    Hi tania184,
    Have you contacted your email provider to make sure there are no problems on their end? If they say their email servers are working properly, check the outgoing and incoming mail servers entries on your iPhone to make sure both are entered correctly. Enter the outgoing mail server even if the account setup indicates that is optional.

  • My hotmail account will not verify on my iPhone at all and everytime I go on the web to sign in it says page not found

    My hotmail account will not verify on my iPhone at all and everytime I go on the web to sign in it says page not found

    You need to turn off find my ipad in settings
    Then restore to factory settings ipad will then be
    as new then enter you Apple ID and password
    bsydd uk

  • HT1918 I deleted a acct on itunes and tried to put in the same credit/debit information it will not verify it?? HELP

    I deleted a acct on itunes and tried to put the same credit card information it will not verify the information so I can not make purchases...HElp??

    yes yes and yes. but now the movie has completely disappered from my iTunes and from my iPhone. I had 16 days and 19 hours left to watch my movie when I started it, and after I started it I still had 23 hours to complete it. Now it is completely gone.

Maybe you are looking for

  • Is there anybody who can solve this

    I have seen so many query related to this on this forum, But i have not seen single satisfactory answer for the same. This is really disappointing. Despite of so many experts are there this is remained unsolved. Let me try once again, This is Printin

  • Urgent help pls on WAD

    Hi to all WAD gurus, I am trying to create a web template for the client. The requirements they have include. LEFT TOP they need a logo    RIGHT TOP they need Report run date, last infoprovider update date and page number #.   BOTTOM LEFT they need R

  • Choosing different versions of Flash Player in Flash Catalyst

    Greetings everyone, Is it possible to choose different version of flash player when I publish my  website using flash catalyst? Currently it is askinf for flash player 10.2 in order to  play. I want to lower down the version of flash player required

  • BAM Report Filters

    Whenever we apply a condition to a filter it gets executed for a single row of data object. Problem -1. I want to test the value of a field in one row and another field in other row so how can I do that? Is there any way to apply conditions on multip

  • CUPS PDF PRINTING IN WINDOWS OVER REMOTE DESKTOP - PRINTER NOT LISTED

    I am running OS X 10.6.2. I connect remotely using windows remote desktop / terminal services to various windows machines. For the XP and Windows 2003 Server 32 bit systems I have no problems with printing pdf documents from the remote windows system