CD Burning Sequence - CANNOT Control!

Hi, here to bust your b**ls again!
I did look at http://support.apple.com/kb/HT2455 but nothing helps.
I want to copy a playlist to CD. The order is the original track sequence of the original CD.
In other words I want to burn an audio CD with tracks 1-13 on it it, in that sequence, just like the original CD.
No arranging of the tracks works! iTunes still insists on burnng the tracks dyslexic - from 13 down to 1.
Take your time in responding - I know my problems are the weirdest on here. lol!

Patting myself on the back for "stumpin' the chumps" again!

Similar Messages

Alternative sequences cannot be released

Operations in alternative sequences cannot be released
Message no. CO224
im getting error msg while realease alternate sequence operation .
for my alternate sequence operation Branch operation 0020 and return operation 0030.
as of now my first operation confirmed .
im trying to release my aternate sequence operation (as a second operation)
Not all operations were released (see log)
Message no. C2038
once i see the log it showing the first above msg
wat will be the problem.???

Prakash,
You must be talking about parallel sequences. Alternative sequences are the part of routing only. While order creation, one of the alternate sequence gets copied.
By the way if not all the parallel seuences are released, you can release them separately also at sequence level or at operation level.
1. Go to sequence overview, select the desired sequence & click on the green flag.
2. Go to operation overview of the desired sequence, select all the operation & click on the green flag in the bottom. Your problem will be solved.
Hope this helps you
SmanS

Sequence cannot be opened in Premiere Pro 5 after installing AE5.5 Trial

I'm travelling with my macbook pro and Master Collection CS5
A couple weeks ago After Effects crapped out on me, saying Quicktime wasn't installed. Days of delay while I searched forums and the intertubes. A quick workaround suggested by a friend seemed to be to uninstall AECS5 and install the AECS5.5 Trial, as I'm travelling 9000 miles from my installer discs and can't just grab them and reinstall the entire Master Collection LIKE I DID 3 WEEKS AGO BECAUSE ACROBAT FREAKED OUT and wouldn't open because it said it was installed as part of a suite and it couldn't find the suite.
So the AECS5.5 trial got me going for my after effects work. It reinstalled the QT32 server or whatever.
However, now I go back to Premiere to open my project files from before I installed the AE5.5 Trial, and most of my presets are gone, and I get the "Sequence cannot be opened..." message detailed in other places on the forums. Doing the XML hack doesn't work. So the AE trial has trashed my formerly working registered Premiere?
Any ideas? I'm 9000 miles from my installer discs. I gather that the Premiere Pro trial won't have the presets I need to work.

Hi,
Workaround-
You can download the trial version of Master collection CS 5.5 its free for 30days and it work like the serialized version that is there are no limitations..
you dont need to uninstall the master collection CS5 for installing CS5.5...
Are you able to launch Premiere CS5 ? and create new project ?
How did you unistalled AE CS5 ?
Did you used Dynamic link in your existing CS5 Project ?

Sequence in Control File

How to create sequence in control file from command prompt.

Pl post details of OS and database versions. Check the docs - http://download.oracle.com/docs/cd/E11882_01/server.112/e16536/ldr_field_list.htm#i1008320
HTH
Srini

Error message "one or more sequences cannot be opened"

Premiere won't open a saved file - error message "one or more sequences cannot be opened" - no options given.
This has happened several times, after Premiere crashes. Has anyone had this same problem, or know what to do about it?

FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

HSL Panel cannot control individual colors in the photos. Using the target tool and the colors change in the entire photo.?

HSL Panel. When using the targeted tool I cannot control individual colors in the photo. In Luminance the entire photo is changing not just one area?

Yes, that's the way it works. The target tool is simply a way to pick a colour to modify, but all colours like that one, no matter where they are in the image, will be modified.
Hal

Sequence from Control file

Can I call sequence from Control file( Sql Loader)
Plz help.

As an option to what Warren suggested, you can also specify an actual sequence name in the control file itself.
LOAD DATA
INFILE datafile.dat
APPEND
INTO TABLE <table_name>
FIELDS TERMINATED BY '|'
TRAILING NULLCOLS
    (<column_name> CHAR,
     <column_name> CHAR,
     <column_name> "seq_name.nextval")

Cannot control volume in Winamp on Audigy S

Hello,
Why I cannot control anymore winamp volume bar? Got Audigy SE, latest driver .04.0077 (9 Jul 07), windows vista ultimate 32b. Audio works fine, CMSS, EAX, movies in AC3. But what happened to Winamp volume control, you have to use only windows volume bar which is quite inconvenient.
Anyone else encountered similar problem? Thanks for any help.

Hello,
Why I cannot control anymore winamp volume bar? Got Audigy SE, latest driver .04.0077 (9 Jul 07), windows vista ultimate 32b. Audio works fine, CMSS, EAX, movies in AC3. But what happened to Winamp volume control, you have to use only windows volume bar which is quite inconvenient.
Anyone else encountered similar problem? Thanks for any help.

I switched on home sharing on My computer And on appleTV, but still cannot Control AppleTV with My ipad

I switched on home sharing on My computer And on appleTV, but still cannot Control AppleTV with My ipad

Hi Wikowiko!
If you want to be able to control your Apple TV through your iPad, you will want to download a free app from Apple called Remote. An article we have published online can help you understand more of the features of the Remote app, and can be found here:
About Remote app for iPhone, iPad, and iPod touch
http://support.apple.com/kb/ht1947
Thanks for using the Apple Support Communities. Have a good one!
-Braden

Cannot control/observe but can send commands and update apps

I've researched the discussions here and basically came up with several ways of fixing the problem. Also I see I am not the only one with this particular problem.
Ok with that said, here are the details.
I am running a G5 behind a linksys wireless router (g5 is hard wired to the ethernet port of the router), my router is set up to open ports 5900 and 3283 just for ARD 2.0. The ports are pointing to my mac's IP address given by the router. I currently use optimum online for my internet usage, so basically I have a static IP address. From work I can access my G5, control/observe, update, etc...
I also have set up ARD on my mothers imac, she sits behind a verizon dsl modem, and an old netgear router I used at one point. I have the router set up the same way, ports 5900 and 3283 are opened up for tcp and udp. From her machine I can actually connect to my G5 at home and control/observe, etc..
My main problem is when I am on the G5 and try to connect to her machine, I can only send messages, update software but cannot visually observe or control her mac. I've gone and had her change the tcp port to 10000 and no luck with control or observe. I then had her delete ARD with an application I found over the net (appdelete). I had her install ARD client and set it up from scratch again. Nothing... I have spoken with verizon IT and they aren't blocking any ports. I am at my wits end, can't figure this one out. OH, I also tried disconnecting the router and had my mother connect the dsl modem straight to the imac and still cannot control or observe. Within ARD It tells me what program she is running, etc... because of port 3283 but that's about it. I know everyone here has given alot of information. But is there something I am missing?
Could it be a hardware issue (mac or router)? or software?

I've tested timbuktu pro 8.6 and I can access my G5 at home the same way as ARD, I just had to open up the port 5901 and set up the user prefs. My only issue is going to be setting up my mothers imac with timbuktu. crossing my fingers to see if it works tonight. If there are any other thoughts out there please feel free to tell me.

Device online, but cannot control camera from Capture screen

I have a the camcorder listed below connected to my computer through a firewire card (also listed below), and I'm trying to capture video from tape with Premiere Pro CS4. The camera is online, and if I use the controls on the camera player to play the tape, the video shows in the capture preview, but I cannot control the camera from the capture screen.
Device Control is set to DV/HDV, and set device to Samsung.
Any idea what's going on here?
Operating System: Windows XP Professional
Sound card / driver version: SoundMax Integrated Digital Audio driver:5.12.1.5246
Video capture card / driver: Texas instruments OHCI compliant IEEE 1394 firewire card, driver:5.1.2535.0
Camcorder: Samsung SC-D363 miniDV, driver:5.1.2600.0
- Amanda, Carolina Tiger Rescue

Yes, the record button is live, just the controls to control the tape deck in the camera are greyed out.
I have since borrowed a Sony DCR-HC42 to capture from, and the controls are working for it. However, it will not capture by setting In Points and Out Points, I just have to position the tape as best as possible, record and select when to stop the recording stop from the Preview. It's not ideal, but it's getting the job done.
This sort of problem seems to be par for the course when using Premiere on a pc. Users just have to plan on a few days to resolve compatability issues that should not have existed.
so for the moment, no critical issues, but once this project is done I will need to revisit the problem.
thanks for the help! Amanda

Screen Sharing.app fails through ssh tunnel with "You cannot control your own screen"

I need to control a remote Mac mini running 10.7 through an ssh tunnel. I've set up ssh with -L for the appropriate ports, and bound my local ports 5900 and 5800 through this.
When I connect to 127.0.0.1 with Screen Sharing.app on my macbook pro which runs 10.8.4, it says "You cannot control your own screen" however, screen sharing is not enabled locally on my machine, I'm trying to access a remote machine.
I tried something else. I created an alias IP of 127.0.0.2 on lo0, and tried again, and got the same thing, so it's doing an ifconfig and looking through all the IPs to see if the IP address of what I'm trying to connect to is bound locally, which defeats the purpose of tunneling through SSH. I don't wish to setup a VPN.
How do I let the Screen Sharing.app know that I'm not trying to connect to my own machine and it should skip this check.
I've also tried with another app, Chicken of the VNC, and that almost works. It connects and shows a login screen desktop to the target machine, but I'm unable to click on any of the account icons displayed in order to login, and all key presses such as tab, space, and enter are ignored.
When at the location (on the same vlan as the target machine) I'm able to remote into it just fine with screen sharing.app, but Chicken of the VNC has the same issue of showing a login screen, but not allowing logins to it.

Your ssh command should look something like:
ssh -L 22590:localhost:5900 remove.mac.system.address
Then you connect using
Finder -> Go -> Connect to server -> vnc://localhost:22590
Have you been doing anything close to that?

How to implement the sequence view controls in the customized LabVIEW UI

Hi,
I'd like to use LabVIEW to run the TestStand Sequence, and show the execution windows in the UI.(something llike the attached image)
I followed my senior's method : connected the sequence view controls into the TestStand UI Execution View Manager as objects.
Then use the register event callback to build a callback VI.
The callback VI is checking which the RunState of the Execution Manager is stopped and assigning the execution to that Execution Manager.
Though it works, but really confuses me, needless to say to you all.
Could someone give me some suggestion how to show the execution windows in the LabVIEW UI? I'll appreciate your help.
Solved!
Go to Solution.
Attachments:
Multi_UUT_SequenceView.PNG ‏65 KB

It's too complicated to answer your question in simple words.
Please take a detail look at the following links. It comes with some basic concepts and tutorials regarding how to use TestStand UI in LabVIEW.
http://www.ni.com/white-paper/7560/en/
http://www.ni.com/white-paper/14376/en/

I cannot control the sensor on my Mac, it moves by itself, and opens different pages. What can cause this problem? please help me.

I cannot control the sensor on my Mac, it moves by itself, and opens different pages. What can cause this problem? please help me.

There are several possible causes for this issue. Take each of the following steps until it's resolved.
1. Follow the instructions in this support article.
2. Reset the System Management Controller.
3. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
4. A swollen battery in a MacBook Pro or Air can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced.
5. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
6. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
7. If none of the above applies, or if you have good reason to think your computer is being controlled remotely, remove it from the network by turning off Wi-Fi, disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop immediately, you should suspect an intrusion.

Since my upgrade to IOS 6, cannot control music from car stereo

Since upgrading to IOS 6 I cannot control the music from my car stereo, nor are the artist, song, or album names no longer displayed. Worked with IOS 5.

Do you drive a BMW? If so, my friend has the same problem. It is a problem with your car's software, probably, not the iPhone.

CD Burning Sequence - CANNOT Control!

Similar Messages

Maybe you are looking for