CD cover and booklet software

Goodmorning
I'm looking to sell some music on CD Baby but they require the artwork for the CD cover and booklet to be in the right format.
Are there templates for use on Pages or on the iMac?
Thanking you in advance.
Regards,
Peter

Here are CDBaby's templates:
http://duplication.cdbaby.com/Quoter/Templates.aspx
And instructions on how to Export to pdf:
http://duplication.cdbaby.com/quoter/VideoTutorials-PDFs.aspx
In OSX you simply Print to .pdf but you do need to set up your Pages file correctly to the Printer's requirements.
Peter

Similar Messages

CD Cover and Booklet templates

Hello
I have completed all the artwork in Pages for the contents of a CD booklet and the Covers, but I need to massage it so that fits into the proper CD Cover/booklet templates.
Where do I find these?
Once again, thank you
Peter

You're always a wealth of knowledge Peter! and I thank you for always assisting
I will check this out as I have completed all the artwork for a CD cover (front and back) and booklet but the specs aren't correct for uploading and publishing.
Apologies for the delay in responding- busy at work
Regards,
Peter

Just got a new macbook air and every time I close the cover and then reopen it later the mouse pointer freezes. I've just updated the operating system but no help Seems like it might be a software problem with mousepad. Its only 3 weeks new !

I purchased a Macbook Air on 01st October and from day 3 every time I close the cover and reopen it later the mouse pointer is frozen
I updated the operating system today but no change.
Any one else having this annoying problem. Seems like a software glitch to me.

http://www.microsoft.com/mac/support
http://answers.microsoft.com/en-us/mac/forum/macword?auth=1
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macword/microsoft-wor d-for-mac-2011-will-not-open-error/ecc42616-6f49-40bb-b8f5-e21c711ea359

Two-sided printing and booklets (HP D2360)

I am trying to do two-sided printing and booklets with an HP DeskJet D2360 printer. I installed on my MacBook the software I downloaded from hp.com. The printer was correctly identified even before I installed its driver.
I am trying to print web pages, ODT documents, and PDFs documents from Preview, either two-sided or as booklets. The booklet printing option appears nowhere, while the two-sided printing option is grayed-out. Both options show up and work properly under Windows XP.

1. If the form is a oure XFA form then you can control the duplex printing settings in the Master Pages. You may need to define a second Master page that has the duplex printing on for the appropriate pages.
2. Yes having a checkbox indicate a value in another field is possible but you will need script to do it. On the chanege event of the checkbox you want checked you can add code like this:
if (this.rawValue == 1){
numericFieldName.rawValue = 100.00
} else {
numericFieldName.rawValue = 0.00;
Paul

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera R

I am trying to update Adobe Bridge and Photoshop CS6, because it is not opening my CR2 files taken by my Canon 6D. I have tried to go to help > updates, and the software says that it is "Up to Date". However, if I view the plug-in, it says that Camera Raw is only version 7.1. I can not find a direct download for Camera Raw 7.3, only the DNG converter, NOT CAMERA RAW! Please Help!

Did you fix your issue? I am having the same one

I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to pur

I have a macbook pro, and am trying to update my software. I recently bought an iphone 5, and my software is to out of date to sync my phone with itunes. I currently am running 10.5.8 and I need to update to atleast 10.6.8. Just wondering if I need to purchase it from apple or if there is an easy/free way to update it.

you need to purchase it: http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard. It is only on a disk, not in download form.

HT3951 I purchased a movie on the AppleTV 2 but it is not showing up in iTunes on my desktop computer. How can I sync? (have lastest version of iTunes and ATV2 software)

I purchased a movie on the AppleTV 2 but it is not showing up in iTunes on my desktop computer. How can I sync? (have lastest version of iTunes and ATV2 software)

Of course it always works, what are you talking about.
I appreciate that re-downloading is only available in the US and then only with certain content. However content that cannot be re-downloaded is not offered for purchase on the Apple TV.

Macbook pro Late 2011 13.3 inch i7 keyboard and trackpad not working bluetooth showing a cross sign and no usb mouse is detected. Almost dead keyboard and mouse. Earlier same problem used to be solved by opening the lower cover and closing it.

My macbook pro 13.3 inch i7 late 2011 edition has previously encountered unresponsive trackpad and keyboard. To solve that, I used to open the back cover and then close it. It has been working fine since that. Yesterday, same thing happened, this time I noticed that bluetooth icon is showing a cross sign across it and keyboard and trackpad were unesponsive. After some time , everything worked fine and bluetooth sign was back to normal. Then , suddenly it went back to the problem. I shut it down by holding the power button. When I booted it again, I could not login because keyboard and trackpad were not working. I attached a HP mouse it didnt work. I opened the back cover disconnected the battery and then connected it again, didnt worked. Since then , I have tried many things and nothing has solved the problem.

@sanjampet
As you suggested I reset the smc, in the first boot nothing worked. In the second boot, it all worked like a charm. I thought that my problem is resolved now. To test it, I shut it down properly. Next morning, I powered it on, all things i.e, keyboard, trackpad, bluetooth etc. worked and I thought that problem has been solved. When I was just going to visit apple forum to reply you, the same problem reappeared. A sawtooth cross over bluetooth icon, keyboard not working, trackpad not working,no usb mouse working which worked well when it was fine. I reset smc so many times again and again but same problem continued. Isn't it a problem of the firmware?
Next time when it will work, I will update its firmware.
My macbook was bought in dec2011 so no warranty now.

Mac Book Air shuts down completely if I close the cover and leave for hours. Message: you shut down your computer because of a problem. Any thoughts what is happening?

Mac Book Air shuts down completely if I close the cover and leave email running. Is n't it supposed to just sleep and awaken whe the cover is reopened? Instead, I have to boot it. Any idea what the problem is? I am unaware of any problem, just close the cover for safety.

Well I don't know anyone that closes the cove and leaves it for Hours... But try going to System Prefrences > Energy Saving > Uncheck Put Hard Disk to Sleep.

How can I change the password in the iBook donated to our nonprofit. No password was given with the iBook? We need to put in printer and other software. Help, we can use the laptop without changing the password.

How can we change the password in the iBook donated to our nonprofit? No password was given with the iBook and every time we try to install items, the password window pops up. We need to put in printer and other software. Help! We can use the laptop without changing the password.

If you did not get an OS X install-restore DVD with the computer you may need
to buy one from somewhere, and you may be lucky to get a retail OS X 10.5.x
version. The original grey-label install set of software and OS X it shipped with
likely would be an older system than Leopard 10.5. Last versions of G4 Mac, &
G5, shipped with a Tiger 10.4 system; so did early Intel-based Mac. Grey discs
which accompanied other computer build models generally do not interchange.
The last OS X version a PowerPC architecture can use, if supported, is 10.5.8.
A PPC processor at 867MHz & faster should be able to run OS X 10.5 Leopard.
{With the correct disc installer, you can use it to change a password and other
things including re-install, and perform disk utility functions, etc.}
There is a chance you may be able to get a white-label Replacement 10.4 DVD
or Replacement 10.5 DVD from AppleCare or the online Apple Store (800myapple)
from a Mac OS X system specialist; these have been available yet hard to get
as not all persons involved with them seem to know if they still exist until someone
is asking. These aren't retail stock, are special discs for computers who could use
a system later than original old discs; these are complete install discs not for one
specific series of Mac. Generally they'd work in supported PowerPC G4/G5; but
do not replace specialized original install DVD, such as an early Intel mac requires.
You'd need to have a serial number of the computer, and a method of payment
when seeking some replacement system media from Applecare or Apple sales
and these discs are not available in a retail store. The original Retail discs are
labeled differently and shipped in a retail box with a big X on the front. Other
sources for retail 10.4 Tiger or 10.5 Leopard may be online via amazon sellers
or computer resellers who handle repaired Macs. Avoid mystery grey label ones
that were intended to be sold and kept with their original computer kits.
Good luck!

Firefox crashes when I try to watch a movie type youtube, has just installed nero and Nikon software on my computer

Firefox crashes when I try to watch a movie type youtube, has just installed nero and Nikon software on my computer. This began shortly after I installed my new CD burner with Nero 9 burning software, about the same time I also installlerade my new Nikon camera software ViewNX2, I ran Avira scan and Microsoft Egan virus scan and they say everything is good in it, he reported a few times, I ran Avira scan of your computer and Microsoft's own Virus Scanning and they say everything is good in it, he reported a few times, tried again now and the sound is heard all the way but the image is still, therefore gentle freezes, got no number on the bug report so I can not say that. Also ask your pardon for errors in language that may be present but hope you understand anyway!

Double post, answered in other thread written by same user.

So I have an iPad with the smart cover, and it's usually supposed to turn on the iPad when u open it, but it's no doing that for me. Nor is it turning off without pressing the button. What is the meaning of this?

So I have an iPad with the smart cover, and it's usually supposed to turn on and off the iPad when u open it and close it, but it's not turning on for me. Nor is it turning off without pressing the button. What is the meaning of this?what caused it to be this way? Is there someway that I could fix it?

Wait a sec did this just start?
You set up the smart cover function in settings (you did that, right?) so, if you did that and it's failed you make an appointment at your nearest Genius Bar now.

My gen 3 iPod Touch seems to have duplicated all my music since updating to IOS 5 so that it now only holds half as much. What can I do about it? I'm using the same iTunes library with OS 10.6 and all software up to date.

My gen 3 iPod Touch seems to have duplicated all my music since updating to IOS 5 so that it now only holds half as much. What can I do about it? I'm using the same iTunes library with OS 10.6 and all software up to date.

Is the camera damaged? Could be a hardware problem.
Try:
Close the Camera app in the multitasking bar, then try again.
Restart/Reset/Restore your iPod. In that order.

I'm missing the back cover and flap for my book. Doesn't show up in the interface. How can I restore these?

I'm missing the back cover and flap for my book in the layout interface. Does anyone know how to restore these? I've searched the interface but can't find an option to add cover/flap. Don't want to order a book without it.
Any advice is welcome!

Time to repair you library: do the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window. Be sure to follow the circled recommendation in the screenshot.
2 - run Option #4, Rebuild Database.
3 - if necessary repeat with Option #1, Repair Permissions.

My Iphone 4s is not being recognized by itunes at all. There is no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

My Ihone 4s is not being recognized by Itunes.There seems to be no connection, the cable i am using is not the problem because itunes will recognize my Ipad2 and Ipod thru it. I have the most current itunes and phone software I need help!

Thank you allan this worked, the final thing was updating the driver softwar for the AMDS in device manager. Thanks again.

CD cover and booklet software

Similar Messages

Maybe you are looking for