CD different for Linux and Windows

I have in hand a very strange CD. This is an (old) CD with drivers for a Samsung printer. The CD has drivers for Linux and Windows. But if I mount the CD in Linux, I see only the Linux driver and if I access the CD from Windows, only the Windows drivers are seen. How they can do that ? How can I mount in Linux the CD in order to see the content seen from Windows ?

In Windows ( DIR D: )
Le volume dans le lecteur D s'appelle SAMSUNG_LBP
Le numéro de série du volume est C432-A954
Répertoire de D:\
28/02/2005 00:53 <REP> ACROBAT_READER
26/10/2004 06:11 740 AUTORUN.INF
28/02/2005 00:53 <REP> DATA
28/02/2005 00:53 <REP> ML-1610
28/02/2005 00:53 <REP> Manual
09/12/2004 03:55 11 219 SETUP.DAT
20/09/2004 07:29 270 336 SSAuto.Dll
17/09/2004 08:03 253 952 SSEtc.dll
22/09/2004 11:09 225 280 SSFcs.dll
12/03/2004 05:59 1 622 016 SSRes.dll
17/09/2004 08:04 155 648 SSTtp.dll
26/10/2004 05:42 307 200 Setup.exe
28/02/2005 00:54 <REP> USB
8 fichier(s) 2 846 391 octets
5 Rép(s) 0 octets libres
In linux (ls -l -F /mnt/cdrom)
total 44
dr-xr-xr-x 22 root root 4096 Feb 28 2005 Manual/
-r--r--r-- 1 root root 2555 Feb 28 2005 README.txt
-r-xr-xr-x 1 root root 51 Feb 28 2005 autorun*
dr-xr-xr-x 3 root root 2048 Feb 28 2005 bin/
dr-xr-xr-x 8 root root 2048 Feb 28 2005 cups/
dr-xr-xr-x 4 root root 2048 Feb 28 2005 data/
dr-xr-xr-x 3 root root 2048 Feb 28 2005 help/
-r--r--r-- 1 root root 8517 Feb 28 2005 icon.xpm
dr-xr-xr-x 9 root root 2048 Feb 28 2005 locale/
dr-xr-xr-x 2 root root 6144 Feb 28 2005 misc/
dr-xr-xr-x 3 root root 2048 Feb 28 2005 ppd/
dr-xr-xr-x 2 root root 2048 Feb 28 2005 scripts/
dr-xr-xr-x 4 root root 2048 Feb 28 2005 setup.data/
-r-xr-xr-x 1 root root 6603 Feb 28 2005 setup.sh*
ouput of isoinfo -d dev=dev/sr0 (in linux)
CD-ROM is in ISO 9660 format
System id: LINUX
Volume id: SAMSUNG_LBP
Volume set id:
Publisher id:
Data preparer id:
Application id: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
Copyright File id:
Abstract File id:
Bibliographic File id:
Volume set size is: 1
Volume set sequence number is: 1
Logical block size is: 2048
Volume size is: 239152
Joliet with UCS level 3 found.
SUSP signatures version 1 found
Rock Ridge signatures version 1 found
Rock Ridge id 'RRIP_1991A'
If I use on Windows the Windows port of cdrtools; then these tools behave as in Linux, showing me the Linux contents. In Linux I can also mount -t udf and then I see:
total 32
-rw-r--r-- 1 root root 32768 Feb 28 2005 Desktop DB
-rw-r--r-- 1 root root 0 Feb 28 2005 Desktop DF
drwxr-xr-x 1 root root 22 Feb 28 2005 Manual/
This was for a Samsung ML-1610 B/W laser printer. This is crazy.
@lolilolicon That explain the result when I mount -t hfs. But the difference in Linux and Windows remain mysterious. How Windows "mount" the CD? I believed it was the equivalent of mount -t iso9660 in Linux but apparently, it is not.
Last edited by olive (2011-09-08 12:12:16)

Similar Messages

  • Why we have separate azure java SDK for linux and windows

    I saw different links for downloading azure java SDK for linux and windows.
    What difference does it actually have when java is platform independent? Or both are same jars?

    Hi,
    Thank you for your post.
    It contains the same jar files.
    Regards,
    Mekh.

  • Font differs from Linux and Windows ?

    Hi, i just want to ask, are fonts different from windows and linux in applet. I use a standard courier font.
    For example, if i make an applet with courier font texts in linux, and make the texts wrap themselves, they will run ok in linux. But if i run the compiled applet in windows, the wrapped text somewhow got truncated.
    But if i compile the applet in windows, it will look ok in linux and windows.
    I've tried replacing my courier fonts in my /usr/java/jdk/jre/lib/fonts/cour*.ttf with the cour*.ttf from c:\windows\fonts with no effects .. Applets compiled and run ok in linux doesnt work in windows. They must be compiled in windows to run ok in both.
    Why is that ?
    Does the compilation use the fonts in the jdk lib or the system fonts ?
    I'm so confused T_T
    Please Help

    How do I get Mac OS 10.4.4 and Word X for Mac to see
    all the characters in the Word for PC document
    formatted in Times New Roman?
    There's no way with Office X, which can't do Unicode Greek. You need to upgrade to Office 2004 which is Unicode-savvy and installs in your Mac the same Times New Roman with Greek, Cyrillic, Hebrew, and Arabic which is used by WinXP. An alternative might be AbiWord or NeoOffice/J.

  • MySQL TinyInts: Different in Linux and Windows?

    Hi all,
    A friend of mine has used MySQL 4.1, Creator 2.1 and MySQL Connector/J (3.1.8) to build a web application in a Windows environment.
    I am trying to open it on my Linux box but I get a ClassCastException while opening his web pages into my Creator.
    We have been tracking down the problem and it seems that Creator 2.1/Linux thinks that TINYINT(1) is of type Integer. On the other hand Creator 2.1/Windows maps TINYINT(1) to Boolean.
    We have tried out all possible combinations (Creator-Linux -> MySQL-Windows, Creator-Linux->MySQL-Linux, even tried out different JDBC driver versions) and it seems the problem is somewhere within Creator.
    Any ideas? Has anybody experienced this problem?
    Thanks,
    Antonio

    By the way. NetBeans 5.0 behaves different to Creator:
    NetBeans 5.0:
    jdbc:mysql://localhost/MYDB?tinyInt1IsBit=true
    -> TINYINT(1) -> BIT
    jdbc:mysql://localhost/MYDB?tinyInt1IsBit=true
    -> TINYINT(1) -> TINYINT
    Creator 2.1:
    jdbc:mysql://localhost/MYDB?tinyInt1IsBit=true
    -> TINYINT(1) -> TINYINT
    jdbc:mysql://localhost/MYDB?tinyInt1IsBit=true
    -> TINYINT(1) -> TINYINT
    As far as I understand, Creator 2.1 is not processing the connection metadata correctly. Is this a bug? Is there a fix for this?

  • Is labview same for linux and windows?

    hi,
    Right now, i am using labview 6.1 and 7.1 windows version. can i use the same windows version for linux  also?

    You need to get the Linux version in order to run LV on Linux. You can open and run the VIs you save in Windows in the Linux version and vice-versa, but some things are Windows-specific and will not work (for instance ActiveX, .net, toolkits which are only supported on Windows, etc.). Also, when you open your VI in Linux, LV will tell you it was changed, because the compiled code is saved as part of the VI. The compiled code for Windows and Linux is different, so when you open a Windows VI in Linux, it is recompiled.
    You might wish to do a search for "Linux" to see more specific details.
    Try to take over the world!

  • Partitioning drives for linux and windows 7

    I want to know if there is a piece of software that is free that can partition my drives so that I can triple boot OSX lion, windows 7 (which is currently blocking...) Linux (ubuntu puredyne).
    A little bit of guidance would be much apprieciated as I have already tried fixing the partition tables MBR in the terminal and ended up disabling windows.
    I know how to reinstall windows but what software can partintion the drives for linux as a triple boot?
    Thanks.

    Well, this is possible using Disk Utility as well as the Linux formatter. However, to triple boot will require special software: The rEFInd Boot Manager - Roderick Smith.

  • Client copy between clients having different OS(Linux and Windows)

    Dear All,
    I would like to do client copy between a client in development system having Linux OS and a client in sandbox system
    having Window OS.
    Is it possible?
    Regards,
    Vinod

    You can get more info at ::*
    http://help.sap.com/saphelp_erp60_sp/helpdata/EN/69/c24c0f4ba111d189750000e8322d00/frameset.htm*
    & also check note 552711 which clearly say at point no 5 .*
    5. Can I create client copies in a heterogeneous system landscape?*
                  Remote copies or client transports can also be carried out between different database and operating systems.*
    Please close thread if you feel your question has been answered.*
    Thanks..
    Mohit
    Do NOT post in bold.... 2nd warning.
    Read the "Rules of Engagement"
    Edited by: Juan Reyes on Aug 27, 2009 12:07 PM

  • Mxmlc File for Linux and Windows

    Hi
    I have used flexSDK for windows xp OS and i have build mxml file using ant build.xml and i have succeded in it then i implemented the same in Linux OS, but im getting error while mxml file is builld. i have shell script for mxml file which is present in bin folder of the SDK..
    Please give me the correct shell script file to build a mxml file
    Error i get
    [echo] mxml file compliation
         [exec] Loading configuration file /root/GRC/jboss/server/default/deploy/nat.war/flexSDK/frameworks/flex-config.xml
         [exec] Error: method java.math.MathContext.<init> with signature (ILjava.math.RoundingMode;)V was not found.
         [exec] java.lang.NoSuchMethodError: method java.math.MathContext.<init> with signature (ILjava.math.RoundingMode;)V was not found.
         [exec]    at macromedia.asc.util.Decimal128Context.<init>(Decimal128Context.java:22)
         [exec]    at macromedia.asc.util.Decimal128Context.<clinit>(Decimal128Context.java:69)
         [exec]    at java.lang.Class.initializeClass(libgcj.so.7rh)
         [exec]    at macromedia.asc.semantics.ConstantEvaluator.evaluate(ConstantEvaluator.java:3268)
         [exec]    at macromedia.asc.parser.ProgramNode.evaluate(ProgramNode.java:80)
         [exec]    at flex2.compiler.abc.Compiler.analyze4(Compiler.java:414)
         [exec]    at flex2.compiler.API.analyze(API.java:2542)
         [exec]    at flex2.compiler.API.analyze(API.java:2432)
         [exec]    at flex2.compiler.API.batch2(API.java:411)
         [exec]    at flex2.compiler.API.batch(API.java:1117)
         [exec]    at flex2.compiler.API.compile(API.java:1290)
         [exec]    at flex2.compiler.API.compile(API.java:1210)
         [exec]    at flex2.tools.Compiler.mxmlc(Compiler.java:240)
         [exec]    at flex2.tools.Compiler.main(Compiler.java:53)
    Shell SCript file to this is attached with this post.
    ===========================================
    #!/bin/sh
    ##  ADOBE SYSTEMS INCORPORATED
    ##  Copyright 2007 Adobe Systems Incorporated
    ##  All Rights Reserved.
    ##  NOTICE: Adobe permits you to use, modify, and distribute this file
    ##  in accordance with the terms of the license agreement accompanying it.
    # mxmlc launch script for unix.  On windows, mxmlc.exe is used and
    # java settings are managed in jvm.config in this directory.
    case `uname` in
            CYGWIN*)
                OS="Windows"
                OS=Unix
    esac
    D32=''
    if [ $OS = "Windows" ]; then
        # set FLEX_HOME relative to mxmlc if not set
        test "$FLEX_HOME" = "" && {
        FLEX_HOME=`dirname $0`/..
            FLEX_HOME=`cygpath -m $FLEX_HOME`
    elif [ $OS = "Unix" ]; then
        # set FLEX_HOME relative to mxmlc if not set
        test "$FLEX_HOME" = "" && {
        FLEX_HOME=`dirname "$0"`/..
        check64="`java -version 2>&1 | grep -i 64-Bit`"
        isOSX="`uname | grep -i Darwin`"
        if [ "$isOSX" != "" -a "$HOSTTYPE" = "x86_64" -a "$check64" != "" ]; then
            D32='-d32'
        fi
    fi
    # don't use $FLEX_HOME in this variable because it may contain spaces,
    # instead put it on the java args directly, with double-quotes around it
    VMARGS="-Xmx384m -Dsun.io.useCanonCaches=false "
    java $VMARGS $D32 $SETUP_SH_VMARGS -jar "$FLEX_HOME/lib/mxmlc.jar" +flexlib="$FLEX_HOME/frameworks" "$@"
    Make changes to this and let me work with linux
    With Regards
    Gopinath.A
    software developer
    chennai,

    Hi
    I have used flexSDK for windows xp OS and i have build mxml file using ant build.xml and i have succeded in it then i implemented the same in Linux OS, but im getting error while mxml file is builld. i have shell script for mxml file which is present in bin folder of the SDK..
    Please give me the correct shell script file to build a mxml file
    Error i get
    [echo] mxml file compliation
         [exec] Loading configuration file /root/GRC/jboss/server/default/deploy/nat.war/flexSDK/frameworks/flex-config.xml
         [exec] Error: method java.math.MathContext.<init> with signature (ILjava.math.RoundingMode;)V was not found.
         [exec] java.lang.NoSuchMethodError: method java.math.MathContext.<init> with signature (ILjava.math.RoundingMode;)V was not found.
         [exec]    at macromedia.asc.util.Decimal128Context.<init>(Decimal128Context.java:22)
         [exec]    at macromedia.asc.util.Decimal128Context.<clinit>(Decimal128Context.java:69)
         [exec]    at java.lang.Class.initializeClass(libgcj.so.7rh)
         [exec]    at macromedia.asc.semantics.ConstantEvaluator.evaluate(ConstantEvaluator.java:3268)
         [exec]    at macromedia.asc.parser.ProgramNode.evaluate(ProgramNode.java:80)
         [exec]    at flex2.compiler.abc.Compiler.analyze4(Compiler.java:414)
         [exec]    at flex2.compiler.API.analyze(API.java:2542)
         [exec]    at flex2.compiler.API.analyze(API.java:2432)
         [exec]    at flex2.compiler.API.batch2(API.java:411)
         [exec]    at flex2.compiler.API.batch(API.java:1117)
         [exec]    at flex2.compiler.API.compile(API.java:1290)
         [exec]    at flex2.compiler.API.compile(API.java:1210)
         [exec]    at flex2.tools.Compiler.mxmlc(Compiler.java:240)
         [exec]    at flex2.tools.Compiler.main(Compiler.java:53)
    Shell SCript file to this is attached with this post.
    ===========================================
    #!/bin/sh
    ##  ADOBE SYSTEMS INCORPORATED
    ##  Copyright 2007 Adobe Systems Incorporated
    ##  All Rights Reserved.
    ##  NOTICE: Adobe permits you to use, modify, and distribute this file
    ##  in accordance with the terms of the license agreement accompanying it.
    # mxmlc launch script for unix.  On windows, mxmlc.exe is used and
    # java settings are managed in jvm.config in this directory.
    case `uname` in
            CYGWIN*)
                OS="Windows"
                OS=Unix
    esac
    D32=''
    if [ $OS = "Windows" ]; then
        # set FLEX_HOME relative to mxmlc if not set
        test "$FLEX_HOME" = "" && {
        FLEX_HOME=`dirname $0`/..
            FLEX_HOME=`cygpath -m $FLEX_HOME`
    elif [ $OS = "Unix" ]; then
        # set FLEX_HOME relative to mxmlc if not set
        test "$FLEX_HOME" = "" && {
        FLEX_HOME=`dirname "$0"`/..
        check64="`java -version 2>&1 | grep -i 64-Bit`"
        isOSX="`uname | grep -i Darwin`"
        if [ "$isOSX" != "" -a "$HOSTTYPE" = "x86_64" -a "$check64" != "" ]; then
            D32='-d32'
        fi
    fi
    # don't use $FLEX_HOME in this variable because it may contain spaces,
    # instead put it on the java args directly, with double-quotes around it
    VMARGS="-Xmx384m -Dsun.io.useCanonCaches=false "
    java $VMARGS $D32 $SETUP_SH_VMARGS -jar "$FLEX_HOME/lib/mxmlc.jar" +flexlib="$FLEX_HOME/frameworks" "$@"
    Make changes to this and let me work with linux
    With Regards
    Gopinath.A
    software developer
    chennai,

  • Different stringWidth between Linux and Windows

    When I use Ms Windows Arial Font in my Java Program running on Linux
    I found out the rendering result of the Font is different with same program running on Windows
    The Arial Font in Linux become wider, and this cause problem because i used absoule position.
    I am using Java 1.3.1, How can solve this problem??

    The Arial under Linux and Windows are not the same. Firts, they may be different font files, second, both systems uses different rendering engines to draw them. Also, some systems, as mine, won't have Arial font at all - substitute font will be used then. So, I would expect, you will have similar problems with any other font, any other operating system or even in some specific locales which uses reversed (right-to-left) line ordering. You will also be not able to do internationalization properly.
    Simply your application is not portable and written with breaking may portability rules. I hope, you are not doing it for money. The layout managers is the only existing aswer to your problem. The closest to absolute is a SpringLayout introduced in 1.4.x.
    The absolute location problem is not a bad thing in Java only - it can screw C, VisualC and CBuilder applications. Take some of them and tweek your system settings - use large fonts for buttons, tiny fonts for menu, change whatever OS provides you to be able to change in L&F and look what will happen with some of those applications. I would be really happy to have layout managers in CBuilder.
    regards,
    Tomasz Sztejka.

  • Why is the connectionUri different in WSManConnectionInfo object for exchange and windows?

    For exchange the connection uri used is : 
    'http://machineName/powershell'
    The WSManConnectionInfo object is created in the following way:
     WSManConnectionInfo connectionInfo = new WSManConnectionInfo(new Uri("http://machineName/powershell"), "http://schemas.microsoft.com/powershell/Microsoft.Exchange", ExchangeCredential)
    To connect to windows, the uri used is 
    'http://machineName::5985/wsman '
    The WSManConnectionInfo object is created in the following way:
     WSManConnectionInfo connectionInfo = new WSManConnectionInfo(new Uri("http://machineName:5985/wsman"), "http://schemas.microsoft.com/powershell/Microsoft.PowerShell", credential);
    Why is there a difference in the connection uri for exchange and windows?

    Hi Cmm user,
    You can refer to WSManConnectionInfo Constructor (Uri, String, PSCredential) to understand.
    uri: The URI that defines the connection endpoint where the remote runspace is opened.
    shellUri: The URI of the shell that is launched when the connection is made.
    credential: A
    PSCredential object that contains the user account that has permission to make the connection.
    For connection to Exchange server, please refer to this article to understand:
    How to: Get a list of mail users by using the Exchange Management Shell in Exchange 2013:
    http://msdn.microsoft.com/en-us/library/office/ff326159(v=exchg.150).aspx
    For connection to Windows server, the uri is as the ConnectionURI, which Specifies the connection endpoint. The format of this string is:
    <Transport>://<Server>:<Port>/<ApplicationName>
    I hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to set owner-only access file permissions both on Linux and Windows

    Hi everybody.
    I have the following problem. I need to store some private user information in file system. So I need to set owner-only access permissions for some directory in user home. I did not find API for doing this. As I understand this is platform specific thing. Could anybody tell me how can I do this both on Linux and Windows?
    Thank you in advance.

    More ideas just came back to me (of something I did before)
    Each OS requires a different control.
    For Windows you will need to set the .policy file for each user (a pain if you have more than a dozen of clients) granting access (R or RW) to files/directories.
    Then you have to write some native code (access via JNI) to access/modify your authorization.
    A more professional solution that I used was J-Integra (other similar tool exist).
    Basically it is a bridge between Java and COM. It magically give you access to the COM API from Java (and vice versa).
    In my case it was to read/write/modify Winword documents transfered between PC and server.
    From memory you have to run the com2java.exe to build the bridge (classes in Java language) between the 2 families. Compile those classes and you have a "driver" for the COM (Microsoft Objects).
    Here I must confess my ignorance on Microsoft.
    Those COM objets must give you some easy/integrated access to the API for LDAP or Microsoft Active Directory Service (for centralize control with more complex setup).

  • Oracle DB sessions on Linux and Windows

    Actually I am confused the way session memory is allocated on 32 bit windows and linux OS.
    Windows is a thread based architecture where all user sessions are treated as threads of oracle.exe process. The addressable space is 4GB and oracle.exe can use up to 3GB in case you use /3GB switch in boot.ini file. It means that combined size of SGA ,PGA and other memory structures can not be more than 3GB. When a session gets connected with a database a PGA is allocated. It means that memory required by database sessions also comes from the 3GB limit. If your memory usage goes beyond 3GB you wont be able to connect new sessions with database or you would require to reduce the size of one of your SGA components.
    Linux is a process based architecture where each user session is treated as a separate process and has its own addressable space. Even on 32bit linux the addressable space is 4GB i.e. 2GB for process and 2GB for kernel. It means we need to accommodate our SGA and PGA in the 2GB limit (there are ways to increase the size of SGA but let assume we are doing nothing to raise the 2GB limit).
    As PGA is allocated for every session when it connects with database.
    My question is how PGA memory is allocated against a database session on linux.
    To further clarify my question I am stating the results of an experiment that I did on linux and windows.
    On windows I set the total size of SGA to 1730M and PGA aggregate target to 1024M. I was able to able to startup the database instance without any issue. Then I started connecting sessions with the database and even ran a query doing a heavy sort in one of the sessions but after connecting 10 sessions with DB I started getting ORA-12500 TNS Listener failed to start a dedicated server process error on windows.
    Then I did the same experiment on Red Hat Linux. SGA size was 1633MB and where as PGA aggregate target was only 10MB. I was unable to start instance when I set the SGA size more than 1633MB.
    With that setting I was able to connect more than 200 sessions with database inspite of running query doing heavy sort in 4 sessions without getting ORA-12500 error. I was even able to connect more than 400 sessions with database after setting PGA aggregate target to 1GB on Linux.
    Now my confusion is why linux was able to handle more DB sessions. I know it’s a process base model and each session is a separate process and has its own addressable space but as PGA is allocated against every session and PGA memory comes from 2GB limit then why PGA memory did not exhaust on linux. Is PGA allocated differently on linux as compared to windows?

    Perhaps the problem is easier to understand if you leave PGA_AGGREGATE_TARGET out of this issue completely.
    The out of memory problem you had, has nothing to do with PGA_AGGREGATE_TARGET setting directly. The difference in number of processes comes from architectural differences in how Oracle uses memory in windows vs unix.
    On windows the SGA + ALL PGAs must fit into one 4GB address space (in practice even smaller as youve noticed). This is because there's only one process, oracle.exe. One process = one address space.
    On Unix, you have many processes and every process can use portion of their own address space for PGA.
    So, on windows (32bit) you run out of address space for the single oracle.exe process. On unix you dont hit this limit just because the number of processes grows (but if some process wants to use a lot of PGA memory, then they eventually run out of address space (talking about 32bit again))
    On unix you probably ran into another limit - amount of total usable virtual memory (RAM+swap) available in your system
    Tanel Poder
    http://blog.tanelpoder.com

  • [SOLVED]Arch Linux, and Windows 8.1 Dual Boot issue

    Hi guys. I recently bought a new laptop, and decided to run Arch Linux and Windows 8.1. I installed Windows 8.1 first as recommended by the beginners guide, and then installed Arch Linux. I made sure UEFI was enabled in my BIOS, and made sure everything was on a GPT partition. The install itself went fine. My laptop loads grub, and Arch Linux shows up and boots, but there is no option to boot into Windows 8.1. The only way I can boot into Windows 8.1 is by accessing my motherboard, and choosing to launch the windows boot manager instead of the grub launcher. How can I get Windows 8.1 to show up in grub? Thanks in advance guys.
    Last edited by Painguy (2014-08-20 20:19:37)

    Painguy wrote:
    -----------Edit------------------
    Yeah just ran this after installing os prober
    grub-mkconfig -o /boot/grub/grub.cfg
    and it works now. Sorry for the crazy posts guys. Thanks for the suggestions and help.
    Yeah I'm sure I'm doing something wrong lol. I did not install OS-Prober. I think that's where the issue is. I'm missing the menu entry in grub.cfg right? Do I just run os prober or do I have to manually edit grub.cfg.
    If that's not the case then here is what I did up until now. What I did was start with a blank SSD drive. I used cgdisk to make the disk use a GPT partitioning scheme. I installed windows 8.1 and checked in windows to make sure it boots into UEFI-GPT mode and it does.  I then installed arch linux using the beginners guide. I made sure to use cgdisk to create any extra partitions, and installed GRUB to the efi partition that windows had created ( I did not format this partition ). I then finished the installation and rebooted, and Grub only shows arch linux. I don't think I'm dealing with anything MBR related. I made sure I used the GPT partitioning scheme....i think lol.
    All you need to do is run os-prober then run grub-mkconfig. It should pick up Windows at that point.

  • LabVIEW for Linux and hardware registers

    Hi all,
    I'm considering using LabVIEW for Linux in an upcoming project based around
    PC/104. As the only way to communicate to the PC/104 module inputs is via
    hardware addressing, I need to know whether it is possible to directly
    address hardware in LabVIEW for Linux. If not can you suggest a way of doing
    this? Also does LabVIEW for Linux and say RedHat make for a more stable
    system than LabVIEW for Windows and Windows 2000/XP?
    Thanks in advance.
    Regards,
    Shane Broadbent
    - remove the 'nospam' to reply by e-mail

    Hi Shane.
    I know that you can address hardware in Labview for Linux: I do it with an NI6071e,k 6602 and 6503. I don't know specifically about the PC/104, but I imagine it can also be done.
    Generally you can talk to the hardware registers using code interface nodes (CINs) in Labview. In the CIN you just use a 'write()' command. I don't think there's anything more to it than that. Creating the CINs is no trouble at all.
    Don't know about stability of Labview with Linux compared to windows, all though others tell me stability is pretty much the same.
    hope this helps and good luck!

  • Problems using RMI between linux and windows.

    I have problems using RMI between linux and windows.
    This is my scenario:
    - Server running on linux pc
    - Clients running on linux and windows PCs
    When a linux client disconnect, first time that server try to call a method of this client, a rmi.ConnectException is generated so server can catch it, mark the client as disconnected and won't communicate with it anymore.
    When a windows client (tested on XP and Vista) disconnect, no exceptions are generated (I tryed to catch all the rmi exception), so server cannot know that client is disconnected and hangs trying to communicate with the windows client.
    Any ideas?
    Thanks in advance.
    cambieri

    Thanks for your reply.
    Yes, we are implementing a sort of callback using Publisher (remote Observable) and Subscribers (remote Observer). The pattern and relative code is very well described at this link: http://www2.sys-con.com/ITSG/virtualcd/java/archives/0210/schwell/index.html (look at the notifySubscribers(Object pub, Object code) function).
    Everything works great, the only problem is this: when a Publisher that reside on a Linux server try to notify something to a "dead" Subscriber that reside on a Windows PC it does't receive the usual ConnectException and so tends to hang.
    As a workaround we have solved now starting a new Thread for each update (notification), so only that Thread is blocked (until the timeout i guess) and not the entire "notifySubscribers" function (that contact all the Subscribers).
    Beside this, using the Thread seem to give us better performance.
    Is that missed ConnectException a bug? Or we are just making some mistake?
    We are using java 6 and when both client and server are Linux or Windows the ConnectException always happen and we don't have any problem.
    I hope that now this information are enough.
    Thanks again and greetings.
    O.C.

Maybe you are looking for

  • Change logs for Cost Center

    Hi Friends Can any one help me how to get Changes made to Cost Center????.. Infact, in one Cost Center, prices for activity type has been changed. Because of that we could find difference of actual costs recorded. Later on corrected to original one. 

  • Update name, surname from display name - script needed

    Hello I'm moved from Postfix to Office365. My users has only display name field filled. This is a problem when we try to find an user, because only way is to find it when You will put name in search field. I decided to build a script that will first

  • Hot deployment of class files (non-EJB)

     

  • MOD_WL - Apache 2 frontend stuck when one of Weblogic Servers stuck

    We are using an Apache 2 Web Server as a frontend of our Weblogic Server 10.3.2 installations, using mod_wl configured as follow: <Location "/csi"> WebLogicHost jerico.procergs.reders WebLogicPort 8012 SetHandler weblogic-handler ErrorPage http://www

  • Payment advice vs Payment Specification

    Hi, What's the difference between Payment advice FPAV - From Customer vs Payment Specification FPAY1B - Create for Payment Lot Thanks a lot, Mario