CD does not mount on desktop and is not recognised by OSIRIX since moved over to Mavericks
Dicomm CD not recognised in Mavericks on desktop or by Osirix
System Preferences > CDs & DVDs > When you insert a blank CD > choose one
Same for DVD, assuming this is all the same for Leopard as for Tiger and you're talking about blank discs.
Similar Messages
-
I recovered a back up from my time machine via a wired connection after getting the 'white screen of death'. Now Time Machine does not recognise any back ups on the time machine when connected wirelessly and wants to do a first back up of the whole machine. How do I get my mac to recognise these older back ups? It connects to the wifi network the time machine creates fine, with the same name and password.
I recommend the following.
1. Reset the TC to factory.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
2. Rename the TC to SMB standard.
That means short names.. 2-20 characters but less than 10 is excellent. eg TCGenx (use number for x that is actual generation of the TC)
No spaces.
Pure alphanumeric. No apostrophe.
3. Ensure IPv6 is set to link-local..
Do the same thing for ethernet if that is used.
4. Manually mount the TC disk in Finder.
Use Go in the top menu.. connect to server.
Type in
AFP://TCname.local (where TCname is your new short name for the TC and local is default domain .. it helps using the domain I found).
You will then find the computer either can or cannot find the network resource.. if it fails something else is wrong with the actual network and you will need to fix that.
It will request the password if it is found.. password is public by default unless you changed it.. type in the password and check to keep it in your keychain.
5. Delete current TM setup and redo it with the newly named TC.
See A4 here. http://pondini.org/TM/Troubleshooting.html
If your backups cannot be found, try B6 again, now that you actually know that the disk has been properly discovered. -
IPod Nano: Error Message "The USB device has malfunctioned and Windows does not recognise it"
Hi everyone, I just received 2 brand new iPod Nanos for my kids for Christmas, thought I'd be smart and sync them both now before wrapping them so I don't have to be messing around with them on the day. One synced without a problem, then using the same cable, same computer, same USB port, the 2nd one came up with "The USB device has malfunctioned and Windows does not recognise it" I've tried restarting my computer, unplugging and reinserting the USB. Is there anthing else I can try before returning it? Thanking you for any help.
I have solved my problem, I ended up ringing Apple and got an awesome lady who told me to reset it by pressing the sleep button and menu button together for about 10 seconds and once it actually turned on for the first time the computer then recognised it, so it's all good, :-) Thank you lovely lady!
-
I have a 16GB iPhone 3GS. Tried synching my phone through iTunes (11.0.1 I think... on a 2009 Macbook Pro). Now when I connect to iTunes, it says it does not recognise the content on my phone. Is this because my phone (and laptop) are too old?
Also, when I tried to Restore the settings, an Error Message pops up that says " The iPhone software update server could not be contacted. The requested resource was not found.
I'm trying to free up space on my phone by removing [literally] thousands of old photos which were originally synched to the phone, because I had forgotten to uncheck the photos button when I synched it ages ago.
I have also tried synching it on my 24" iMac (running OSX Snow Leopard). But again, when I try restoring the phone through itunes, it says the file is corrupted. It sggests unplugging the device, and then plugging it in again. I have done this numerous times with no success.
I'm guessing it must be because my phone (and versions of iTunes, and OSX) are all too old.
Please can anybody help.
Cheers,
Dan_nz.There are multiple reasons that lead to issue. You should read the troubleshooting guide to get the right solution to solve the issue: iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
-
I was in the middle of updated iOS7 onto my 4s then it crashed, tried to restore and backup and it wont power off restart it just shows a black screen.
Tried the tips
Does not recognise my phone as I updated Itunes to see if this would work and I have lost all my back ups and every thing,
when i try the power on butter and the home button I get the apple icon, then it shows power cord and itunes logo and then returns to a black screen, I can hear it beeping like when you put it on the charge each time this happens on my PC.
please can anyone else help me???Unable to Update or Restore..?
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Take your time... Pay particular attention to Steps 3 and 4
Note:
Some users have reported as many as 8 or 9 attempts were necessary before success. -
please help. ive bought a second hand ipod nano, when i connect it to my pc, it does not recognise it in itunes,yet it comes up as a sigma mass usb device. its an ipod nano 8gb?. im running on windows vista,my own ipod classic runs fine.
there is a good chance that this can be related to bad contact in USB lead.. e.g not enough power from IPOD to PC so that pc cannot recognise it. Where I work I get alot of USB devices on pc's that are not recognised and most of the time it is the connection to the device that is not good enough because the flat end of the USB adapter has been gradually bent over time just slightly and now contact is not good. It can also be todo with drivers or If you are using it through a USB hub.
so if it is not working through USB hub try direct. also try in back of PC as these Ports or direct access to main board to pc and would be less trouble some if there was a voltage loss from mainboard in pc to front of unit. -
i have suddenly got this message 'one of the USB device attached to this computer has malfunctioned, and Windows does not recognise it'. it says error code 43. the usb drives (2 in no.) have stopped working as in they dont recognise the external hard drive
or pen drive. I have a HP pavilion dv4 series notebook. the usb drives were working fine - however suddenly yesterday this strange message cropped up. life has taken a drastic turn! please help.
in device status is says: Windows has stopped this device because it has reported problems. (Code 43)
location: Port_#0002.Hub_#0005
driver provider: microsoft
date of driver: 21-06-2006
driver version: 6.1.7600.16385
HELP!!!!!!!!!!!Hi ameet2005,
Please check if the following suggestions help:
First, please disconnect all USB devices and then perform the following steps:
1. Click "Start" button, type “devmgmt.msc” (without quotation marks) in the “Search” bar and press "Enter". Click “Continue”
if necessary.
2. In Device Manager, double click to expand "Universal Serial Bus controllers", right click on the Host Controller, click "Uninstall" and click "OK".
3. Repeat the step 2 to uninstall all items under "Universal Serial Bus controllers".
Then, restart your computer and Windows 7 will reinstall all USB controllers automatically.
If the issue persists, please check if it can be resolved by running
System File Checker.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ” -
I synced by ipod touch with itunes and it wiped all my music. Now itunes does not recognise my ipod. How can i fix this?
Here
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X
Does the iP{od work OK
Does it charge when connected? -
I have a 6th gen nano and windows 8.1. Itunes does not recognise my nano. I have tunes to download
B noir
Yes that is correct
Okay. Have you tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8 -
I have updated my laptop to windows 8.1. My laptop now does not recognise my iphone, nano or ipad? I have uninstaled and reinstalled. I can downlaod pictures off my iphone but not connect to itunes?
Please helpiOS: Device not recognized in iTunes for Windows
-
I am a windows user that has converted to Mac and loving it but when I updated to Lion my wireless internet dongle would not work anymore and the Macbook Pro does not recognise the device at all so I am unable to reinstall it again. Any ideas would be greatly appreciated.
Go to Finder > Preferences then select the General tab
Make sure External disks is selected. -
My Imac and macbook pro stopped accessing my MP640 via the home wifi set up, so I sent all the canon software to the trash on both computers, thinking I should reinstall the software I got with the printer, but the software does not recognise os 10.7.5. I am using a netgear modem. I also use time machine to back up to time capsule.
Your Canon Pixma MP640 driver:
http://support.apple.com/kb/DL899 -
trying to reinstall my adobe photoshop and premier on computer the adobe download does not recognise the serial nos that i have that are in my adobe account.thanks,gem
Here are a couple links that might help
Error "The serial number is not valid for this product" | Creative Suite
Creative Cloud applications ask for serial number
And try using this cleaner
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 -
Lightroom 5.7.1, Yosemite OS X - Synchronise Folder function doesn't work in Lr.
Is there a compatibility issue? I can see the folders/images in Finder but when trying to synchronise folders in Lr it does not recognise that there are any images and therefore unable to import to catalogue. Anyone has any idea how to make it work. Thanks a lot.Hi Elba,
Thank you very much for your reply. Not sure, however, that we are talking about the same problem.
I am trying to perform the same function in Lr that I have been doing for many years in the past and has only been a problem in the last few days (possibly coinciding with upgrading to Yosemite, trying to find out whether that is the problem)
I am not intending to sync any files with Creative Cloud but only trying to use 'Synchronize Folder' function in Lr. Normally, I would right click on a particular folder in Lr catalogue and click on that function to check that the Lr Catalogue is perfectly matching my drives where the original photos are actually stored.
The problem that I only started to encounter is that I can see the files on the actual drives but they do not appear in my Lr Catalogue and they are completely invisible to Lr. I simply can not get Lr to recognise them and then import them to catalogue.
If for example, I export images to Ps and then save and close them, they do appear on my drive but are invisible to Lr and I can't get them imported into the catalogue. Import to folder also not producing any results as they are still invisible to Lr.
Completely baffled by it. Any idea what could be the reason?
Kind regards,
Nik -
After updating my iphone5, my phone went back to factory setting and now I can't sign in with my apple id because it does not recognise it... Help?!
Yes, my telco is an approved carrier. If my phone was brand new, I think so, they opened it in front of me.. I really couldn't remember it was 1.4 years ago. It did seem new.
Well it says, "_____" cannot be used to unlock this iphone. I've tried both my apple ids but it didn't work.
Maybe you are looking for
-
Apple TV Energy friendly Screen saver - ALL BLACK?
I've searched for all ways to dim screen savers or those best for plasma tvs to avoid screen burn On Apple TV. but what about a screen saver like on MacBooks that are all black to conserve energy? All these large and colorful images floating around a
-
Add SOAP header before the WebService request (Windows Forms)
I have to add this header before my Request: <h:FordDealerIdentity xmlns:h="urn:ford/star/security/v1.0" xmlns="urn:ford/star/security/v1.0"> <soapenv:Header> <SiteCode>SZBRA</SiteCode> </soapenv:Header> </h:FordDealerIdentity> My request: var srv =
-
Can Oracle and Sybase Coexist on Sun Box ??
Hello Everybody, I an trying to find out if Oracle and Sybase can coexist on same Sun Solaris box ??. I would really appreciate your help. Thanks,
-
Record video using webcam in webapplication
HI all, I have a requirement like, need to record video through webcam in my webapplication. can u please guide me how can do that. i dont know anything how to do this. please guide me in solving this requirement. thanx in advance
-
JDeveloper wont start without commenting out setjavahome in jdev.conf
Jdeveloper crashes on start. Running jdev.exe in console I get a "Duplicate handle failed" error from java. If I edit the jdev.conf and comment out the line SetJavaHome.... then Jdeveloper will start after being prompted to find java.exe. Tried unins