Cd doesnt show up?
i was planning on burning some pictures onto a cd but when i put the cd in it didnt show up and i dont know how to get it out now. please help me out here.
thank you.
if you could email any answers you have to [email protected]
if not just post them here.
Mac OS X (10.4.5)
Open your hard disk. Look in the left-hand column and see if your see your CD at the top part of that column.
Similar Messages
-
My iphone doesnt show up in my itunes. It shows up when i plug it into another laptop. Similarly, when i use someone else's iphone, that shows up in my itunes. Obviously my itunes wont recognise my iphone. Please help
Hello ashbyy123,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Have a nice day,
Mario -
I have purchased music on my ipod touch but it doesnt show in my itunes library on my computer.... please help
azmama3 wrote:
I have purchased music on my ipod touch but it doesnt show in my itunes library on my computer.... please help
With your iPod connected to your computer and iTunes running, select your iPod form the left pane, click the File menu in top bar, from there select "transfer purchases from iPod"
Stedman -
i tried to restore my iphone but when it was restoring it said a problem occurred and now it just shows the itunes symbole and its telling me to connect to it but when i try to it doesnt show up on my computer
Hi there starbaeza,
You may find the information in the article below helpful.
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
-Griff W. -
ordered my iphone 6 plus from atnt on september 29 when will it be ship to my house but it doesnt show anything on atnt order information! what should i do?
the truth is that i order my iphone 6 plus on september 26 from atnt store and on site but my credit card was declined
so i tried it the next day but it works but from atnt site doesnt show anything(it only show my order on iphone 6 plus just like the last time)
when will it say your order has been shipped?
when will it be ship to my house?
and also im going to use atnt next on iphone 6 plus
please answer my question!This is a user to user technical support forum. We can't possibly answer your question.
-
I can go on it for about 10 secs then it freezes,
i have to keep restarting it and it doesnt show up on
itunes when i try to restart it please HELP!! >.<
HASNT BEEN JAILBREAKED ASWELL- Try a reset. Nothing is lost
iOS: Troubleshooting applications purchased from the App Store
- If still problem, see it iTunes nows sees the iPod so you can restore the iPod.
- Next see if placing the iPOd in recovery mode will allow a restore. For recovry mode:
iPhone and iPod touch: Unable to update or restore
- Last, try DFU mode and restore.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Hey, my ipad is disabled and i cant open. i tried connecting it with itunes in recovery mode to restore it but it wont work it doesnt show and options itunes doesnt detect my ipad in recovery mode. what do i do know? please help!!!
If you followed these instructions and you were unable to enter recovery mode, I'm still leaning toward a hardware problem. Also, since you have IOS-7, read this. It might help.
-
I have a mac book pro that i bought in late 2009. My current software is snow leopard version 10.5.8. I would like to get the new lion operating system but I cant without first getting the latest version of snow leopard. however when I go to update my software it doesnt show that any update is available.
10.5.8 is Leopard, not Snow Leopard. You need the Snow Leopard DVD;
You can get it only by phone now from Apple.
In the US, call 1-800-MY-APPLE and ask for a sales assistant. Last quoted price was $19.99 for the single-user and $29.99 for the family licence.
For other countries, check here; http://support.apple.com/kb/HE57
Don't forget to ask for Sales; the tech support guys can't help.
If you want Lion, rather than Mountain Lion, the same Sales team can give you a download code to use at the Mac AppStore.
To get the App Store, you need to update your new Snow Leopard from 10.6.3 (which is the version on the installer) to 10.6.8 with the combo update; http://support.apple.com/kb/DL1399
Be warned that the upgrades will render a lot of older software unusable, and will need new drivers for printers and scanners in all likelihood. -
Ipod shuffle 4th gen charges plays but doesnt show up in windows or itunes
Ipod shuffle 4th gen charges plays but doesnt show up in windows or itunes tried to check usb driver but computer says it is working properly
Just disconnecting it without ejecting should not cause permanent damage. It may cause data corruption, if iTunes was in the process of syncing at the time. But iTunes should still see the shuffle and (maybe) tell you to Restore it.
Is it possible that the "accident" damaged the USB cable?
Make sure you have done this on the shuffle since the problem occurred
http://support.apple.com/kb/HT1655
And you should also shut down (power off) the computer, if you have not already.
Have you tried more than one USB port on the computer (not a hub if you use one)? You can also try it with all other USB devices disconnected, except for standard keyboard and mouse (if normally used).
If those things do not help, what version of Windows do you use? -
HT5925 when I connect my Ipod touch it doesnt show on my itunes screen
my ipod doesnt show on my itunes screen when I plug it
Hello alexglvn,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
1. Update iTunes
2. Check the USB cable
3. Verify that Apple Mobile Device Support is installed
4. Restart the Apple Mobile Device Service
5. Verify that the Apple Mobile Device USB Driver is installed
6. Check for third-party software conflicts
Best of luck,
Mario -
my iphone wont turn on. the screen is just barely lit and has a greyish appearance; plus when i plug in my iphone to my macbook pro it doesnt show up in my itunes. what do i do?
http://support.apple.com/kb/ht1808
-
IPod shows up under my computer, but doesnt show up in iTunes
When i plug in the iPod, a window pops up showing the folders contained on the iPod, but the iPod doesnt show up in iTunes.
here is a place to start
iTunes Does Not Recognize Your iPod -
I need help restoring from my computer
My 3gs randomly shuts off so I went to apple they said it was battery. I replaced battery and it would not boot back up. So put old battery back. So now I am trying to use my old phone 3g. When I plug in 3gs and back up it shows that I did. So I eject and plug in 3g phone , when I click restore from backup it doesnt show my other phone 3gs and my name at all.??? can you help
-
i deleted my note by accident i do have notes on icloud. so i had half the note saved but the other half was very important and hard to right. i restored my ipod on i cloud back up but it still doesnt show i put so much time in that anyway to get it back?
How did you delete the Note? If you did a "select all" and "cut", open the Note and shake your iPhone to undo the cut action.
-
hi,
I am having a problem installing windows via bootcamp.
I already partitioned my hdd via Bootcamp, downloaded and copied all the supports for windows, and windows is on an external USB as well. I had to stop the process the other day, so i shut down the computer. Now I am trying to boot from the USB, but I cant get to that point where the computer should restart and windows would start installing.
. After restarting, holding command, it doesnt show up as bootable device.
How shall I move forward? My disk is already partitioned, and if i start the whole process from the beginning, it wants me to partition again - although I already made a 100GB partition for windows.
Please help me out.
best,
ZoltanSo, here is what happened when I tried to make it.(sorry for quality, i had to take them by phone)
At first when I opened it I saw that I could simply resolve it just by stretching the arrow at the bottom, giving the 100 GB back which I partitioned before via Bootcamp. At this point options was not available.
I didnt do it because you mentioned earlier that it might be not designed to install windows.
The second thing I tried I choose 1 Partition from Partition Layout. This time Options were available but I didnt see anything like GPT, the onces that are optionable are on the screenshot.
What do you think how shall I move on? I was thinking to give it a shot with option 1, just stretch it back and try everything from scratch. -
when saving my illustrator file to a pdf it doesnt show all the artwork ie boxes are hidden in the pdf or only showing part of them. Even some text is hidden. I have flattened the artwork so everything is in one layer. How can I fix this?
Hi John
I have indicated on the attached jpeg where the problem is, basically a line of text is missing at the top and part of the feeding diagram is missing. I created the artwork in different layer and then flattened. All text has been converted to outlines, however the areas being affected have no transparency, I have used solid fills or no fills. I get the same result when I export the file as a jpeg. Hope you can help.
Maybe you are looking for
-
My friend is having a problem and I post it here because he can't log in. He has been in my contact list for 6 years. Dear Skype Staff! A few days ago, I ran into a problem and I hope that you will be able to help me in this situation. It seems that
-
I'm trying to purchase ingame from itune but payment decline
Hi
-
I cannot find the bookmark icon (star) on the location bar. Please help!
I just started using Firefox today, as I have had enough with IE freezing up whenever I try to close a link that opens from one browser window. Now after going through the Getting Started tutorial, I see that I cannot find the bookmarks icon (the sta
-
How can I change LDAT user attbibutes from my application ???
how can I change user attbibutes from my application!!!! It always tries to create a new user but I need to change only values (like tel number!!!) of EXSISTING user!!! I can not find any class/method to change the value of existing User attribute !!
-
Hi Experts, When i am going to create delivery, system is giving me fallowing Error. Stock is there, i am not using WBS element anyware still systems is giving me error. Anybody know answer of this error. The detailed description is given bellow, *En