CD door will not open cmt-hpz9 micro system

How do I remove CD's when door will not open.

If you experience difficulty with the disc tray opening or closing, follow these steps to try to resolve the issue:
If the issue is still unresolved, service may be required. Click here to check for your service options.
If my post answers your question, please mark it as "Accept as Solution"
http://bit.ly/Win-4K

Similar Messages

G5 Powermac SuperDrive Door Will Not Open - (mechanical problem)

...so my superdrive was acting up, making noises etc. so I removed the superdrive from the case, took it apart, put it back together, re-installed it but now it will not open the door on the case (outer door) ... the cd tray will not come out unless I hold the outer door open.
reinstalled several times to make sure its lined up ok, but it still doesn't work.
when I hold the door open and push the eject button, the cd tray comes out fine.
the door doesn't seem to be jammed. moves fine.
I don't believe its a software problem
now what?

it would be good if there was a burner that could burn cd, dvd, dual layer and HD / Blueray too.
There is, but to get/use an internal one you need IDE to SATA converters since all Blu-Ray drives are SATA...
http://eshop.macsales.com/item/LG/WH10LS30K/
Or an external one...
http://eshop.macsales.com/item/Other%20World%20Computing/MRF8BDSD12X/
But you need Toast 10 to Write Blu-Ray, so maybe...
http://eshop.macsales.com/item/Other%20World%20Computing/MRF8UEBDW10T/

I have a Sony CDP-CX335. The door will not open and the turntable inside will not move

Can someone please help me trouble shoot this issue. I have disconnected the power and turned back on, I have held the eject button for a minute+ with the unit on and off. The door still will not open automatically and the turntable inside will not move. There are no dics inside. When turned on the light flashes inside.

Hi puffinparks,
Please check the link below for further assistance.
https://eservice.sony.com/webrma/web/index.do
Thanks.
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

CD changer door will not open.

I have a Sony Remote Controlled Hi-Fidelity home stereo system, model# HCD-441 and serial# 8812786, manufactured in 1994. It has the receiver, double cassette decks and 5-disc cd changer. I cannot get the cd changer door to open and it will not play cd's. The cd display works, I can skip discs, the little dash (--) light blinks like it is reading the cd's but nothing else happens. I know there are cd's in the changer.

Hi RogoWallo33,
Welcome to the Sony Community!
Thanks for your message. Regarding your concern, If you experience difficulty with the disc tray opening or closing, follow these steps to try to resolve the issue.
Turn off the power to the disc player or the stereo system, if the disc player does not have a separate POWER button.
Unplug the power cord from the AC outlet.
Verify there is nothing is blocking the tray from opening or closing.
Let the disc player or the stereo system remain without power for approximately one minute.
Plug the power cord back into the AC outlet.
Turn on the power to the disc player or stereo system.
Attempt to open or close the disc drawer or tray.
If the issue is still unresolved, service may be required. Here's the website if you want to setup a repair for your unit: Sony Product Repair
If my post answers your question, please mark it as "Accept as Solution"
Regards,

New key board eject key will not open Drive Door

I know this has been answered, but I cannot find it. I have added a new white key board (not the thin one) to an 800 Mhz iMac flat-panel and of course the CD drive door will not open with the eject key.
I'm considering removing the door and gluing a pull-handle on the tray! Seriously, why would Apple make the eject key incompatible on the newer keyboards?
Thanks
Message was edited by: Peter Mars

Odd, I had the A1048 (later white keyboard with USB1.1 ports on back) keyboard on my iMac G4, I've just plugged it in my Alu Intel iMac and the Eject Key ⏏ still functions as expected. Have you checked the keyboard shortcuts in  menu > System Preferences... > Keyboard & Mouse?
Alternatively pop the ⏏ key and the F12 key off the keyboard and swap them over.
cheers
mrtotes</foint>

Old address book will not open in Snow Leopard

After upgrading to SL, attempting to access AB in the dock brings up the message "This version of Address Book will not open in this operating system. You have Address Book version 4.1.2". Querying Apple Support brought suggestions from reinstalling just Address Book to utilizing Time Machine. Solution was incredibly simple.
When upgrading to SL, the OS upgraded AB...but only in Applications. If you're getting this message, go to Applications and click on AB there. If it opens, just delete AB in the Dock, then transfer the new, updated AB to the dock, and you're all set.

Somehow you've retained an old version of Addressbook (version 5.0.3). The current version is 6.1
Look in the apps folder to see if you have the current version, the dock icon may be pointing to the old version.
Regards,
Captfred

I have a 5 month old Magic Mouse and I want to replace the batteries for the first time but the battery door will not release any suggestions?

The battery compartment door on my Magic Mouse appears to be jammed shut and will not open, the device is only 5 months old and this is the first time I have needed to open it to change the batteries. Are there any suggestions?

It could be you are approaching it incorrectly.   It can be a tricky little gadget that actually works with minimal pressure.
Try turning over the mouse so the compartment panel faces you, optical sensor topmost. Then holding the mouse at each side but not on the panel itself, flick the small, black rectangular panel downwards.   The top of the panel should spring out, though it may require you to manipulate it fully away from the mouse.
Once you have replaced the batteries, starting at the bottom reverse the procedure then clip into place.   Remember to move the small switch next to the optical sensor upwards which should turn on the green light.   Then click twice to connect.

Firefox crashes when opening and will not open in safe mode

Recently FF3 started crashing when opening. It will not open in safe mode as well. I have uninstalled it including deleting the install folder and profile folders as well as registry entries. Upon reinstallation is will still not launch in any mode.
I have scanned for malware with several scanners and that has not found anything.
Here is the crash report cause - nsCOMPtr_base::~nsCOMPtr_base() | nsDocShell::SetupNewViewer(nsIContentViewer*)
Anti-virus is Trend Micro Worry Free for Business. I uninstalled it and Firefox and then reinstalled only Firefox and still get the same thing.
I do not know what to try next.

Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.3
BuildID: 20100401064631
CrashTime: 1274739594
EMCheckCompatibility: true
Email: [email protected]
FramePoisonBase: 00000000f0dea000
FramePoisonSize: 4096
InstallTime: 1274097386
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 525200
StartupTime: 1274739562
Theme: classic/1.0
Throttleable: 1
URL: http://en-us.start3.mozilla.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
Vendor: Mozilla
Version: 3.6.3
This report also contains technical information about the state of the application when it crashed.

IPhoto will not open normally - hangs up

When I try to open iPhoto, it hangs and will not open. I can go in the "back door" by choosing a photo and selecting "open with" and iPhoto, but the application won't open normally. I got my new laptop last December and migrated my applications, etc. iPhoto worked fine for a few months but has recently not been able to open.

Here's the iPhoto forum:
https://discussions.apple.com/community/ilife/iphoto

3210 all-in-one access door will not close

I opened the access door to my 3210 printer to change ink cartriges and now the door will not close. It seems to be locked or jammed in the open position. This is a first in all of the ink changes I have done. Help. Is there any way to get this unlocked?

my access door won't close either. did you find a solution. please help.

My system preferences will not open, what is wrong?

can some one please give me a hand... I can not open my system prefence from and of the 3 way it can be opened. Is there any place on line that I could possibly reinstall the OS so that it can be functional?

Thanks for your response, and sorry it did not make sence... I wanted to know why my system prefence will not open. I click on it and absoltuley nothing happens. I try to back door it by right clicking to try and change my back ground picture, but that gives me a sound you would hear when the CPU or program won't let you do somthing. Maybe someone else has had the same problem and was able to fix it. I hope that clears it up.

I am trying to import developed images from LightRoom 5 in o Photoshop 6. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, you do not have necessary access permissions or another progra

I am trying to import developed images from LightRoom 5 Photoshop 6 for further editing. I am receiving this message and the images will not open.....'Could not open scratch file because the file is locked, or you do not have necessary access permissions or another program is using the file. Use the 'Properties' command in the Windows Explorer to unlock the file. How do I fix this? I would greatly appreciate it if you would respond with terms and procedures that a computer ignorant user, such as me, will understand. Thanks.

Have you tried restoring the Preferences yet?

TS2518 Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the

Help, I had aperture open and working on a image and did not have a battery in and bumped the power off. As a result it will not open my master, it is locked. when I try to open that Library it says There was an error opening the database for the library. I have tried every thing. I updated the other libr but now it will not open the main to update. What do I do?

Try starting Aperture with the command and option keys held down. You'll get 3 options.
Try each, starting at the top, in order, checking after each to see if it fixes the issue.

I have dloaded and reloaded firefox 7 b4 i had firefox 5 now after system restore and proxy setting changes an d default settings fire fox still will not open what am i doin wrong

ater upgrading to firefox 7 from version 5 i cant open this web browser it worked b4 but after upgrade it will not open. i did system restore to go back to a time when it did work and i still have this problem.the message says website is too busy or proxy settings r wrong but i changed them every way possible.i uninstalled the program and reinstalled it with no success. even google chrome will give me same message is my pc infected? or is there a way to get firefox to be my primary web browser?my operating system is win7 vista i am currently backing up my files to a portable drive and my intension is to save files and reboot entire system and then d-load firefox again will this solve this issue?

ater upgrading to firefox 7 from version 5 i cant open this web browser it worked b4 but after upgrade it will not open. i did system restore to go back to a time when it did work and i still have this problem.the message says website is too busy or proxy settings r wrong but i changed them every way possible.i uninstalled the program and reinstalled it with no success. even google chrome will give me same message is my pc infected? or is there a way to get firefox to be my primary web browser?my operating system is win7 vista i am currently backing up my files to a portable drive and my intension is to save files and reboot entire system and then d-load firefox again will this solve this issue?

Have Macbook Pro & 4th gen iPod Touch. Downloaded & installed iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says "iTunes" Data too new to be used with this version of iTunes.

Have a Macbook Pro and a 4th gen iPod Touch. Downloaded and install iOS 4.3.2 yesterday. Upgrade went without a hitch, but now iTunes on My Macbook Pro will not open. I get an error that says --The file "iTunes Library" cannot be read because it was created by a newer version of iTunes--. I am running iTunes 10.1. I searched for Updates to my MacBook Pro (running 10.6.7), but comes back saying no updates available. WHAT IS GOING ON??

Is your computer still authorized in the Store menu in iTunes?
iTunes Store: About authorization and deauthorization
When I changed to my new MacBookPro I had to authorize it although I used TimeMachine to transfer my settings and data.
Did you try to deselect Wi-Fi syncing and enable it again after that?
iTunes 10.5 and later: Troubleshooting iTunes Wi-Fi syncing
Did you already transfer your purchases and manually started a backup?

CD door will not open cmt-hpz9 micro system

Similar Messages

Maybe you are looking for