CD drive disappearing/not reading after iTunes 7 installed.

anyone else had this pickle?
After I installed iTunes on this pc (P4 2.6Ghz with SiS 650 chipset) the DVD drive suddenly comes up in device manager as "not working properly" with one of those yellow exclamation points on it...no biggie: we banned the stupid kids from using their ipods on this computer.
now the kids have their own pc...a fair bit older. after i installed itunes on it the CD drive is still active in device manager, but every CD inserted comes up as blank. (ie....the drive no longer bothers reading the disc)
forgive me for being the slightest bit cranky at the windows implementation of itunes, but does anyone have some sort of insight regarding this matter?

I am having the same problem. On IBM T43 laptop.
After the upgrade to 7.2.0.35 my CD drive will read discs and I can even see it when I use file->import; but then I have to import each track individually.
I also don't get "Play using iTunes" in the autorun window after inserting a CD that I used to get.
Doesn't matter whether I put in an audio or movie CD/DVD only windows media options are shown to me.
This is very annoying especially since one of my recent purchases has 45 tracks on it.
IBM Laptop Windows XP

Similar Messages

Why my dvd drive will not read or run any install software,

after i did my system recovery my dvd drive will not load or run any software, need somE HELP

will the drive read cds? If the ODD will read the cds then it maybe a update will fix it. If it won't read those too, you may need to get a new ODD (dvd drive).

Multiple apps not working after iTunes 6 install

ITunes 6.0 and QuickTime 7.0.3 were installed by Automatic Software update. Since then multiple apps including Safari, Mail, and all Dashboard Clients. At first System Preferences was working but has since stopped. All seem to start up but stop after just a couple seconds with the message "The application XXX quit unexpectedly" I have run Disk Utilities Repair Disk Permissions and Repair Disk, from the hard drive and Install DVD. I can't find all the preference files (for Safari and Mail at least). What to do next?

I second this problem. Although I'm not sure what it relates to (if it's the download of iTunes 6.0, or something else), I too am experiencing problems with many different applications quitting unexpectedly. The problem was initially seen when I inserted a DVD to watch, and DVD Player quit. I thought that there might be some new software I could download (which there was... DVD player 4.6), so I downloaded the new software, but the installation application kept quitting. Also, "Software Update" quits unexpectedly, which I found when I tried up update to Mac OS X (10.4.2) from simple 10.4 using that application.
To Steven - sorry that I cannot offer any advice, but can only share with you in your question of What to do next.

After BIOS update DVD driver do not read DVDs anymore - Sat A80

Hi,
I have a Satellite A80-131 and after bios update (last version 2.5) by windows procedure update, my DVD drive do not read DVD medias anymore. It is possible to read CD medias, but not DVD one.
Can I reinstall the old bios? Can I reinstall the firmware?
Thanks
Ronai Lisboa

Hi Ronai
Like Jimi has said in the posting above. It's very unusual that after BIOS updating the DVD drive hasn't read the DVDs.
Furthermore it's not advisable to use any 3rd party applications to DOWNGRADE the BIOS. Usually only the ASP can downgrade the BIOS. Such procedures are very serious and the wrong procedure can damage the motherboard.
However, it's nice that you have solved the problem and that the drive works properly.
Thanks for the feedback.

CD/ DVD Drive is not reading any discs! - HP Pavillion DV6747TX

Hi there, I have a problem. My CD/ DVD Drive is not reading any discs! I have no idea what's happened..it was going fine and then all of the sudden it stopped working.
The computer I have is a HP Pavillion DV6700 or DV6747TX to be exact and the CD/DVD-Rom drive is a TSSTcgrp CDDVDW TS%L632N ATA Device. It seems to be present in the Device Manager and in the Computer Menu. When I put a CD or DVD into the disc drive lights are blinking and it sounds like it's trying to load or do something, but nothing is coming up. CD Drive E still says CD Drive E instead of reading the disc that's in there and when I click on Drive E it says Windows cannot read the disc in drive E.
I have tried searching the net for answers including the suggestions on this website and have tried a few other ideas I have come across but nothing seems to be working. Any help would be greatly appreciated

This is usually a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
Manually delete the registry entries
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
UpperFilters
LowerFilters
Step 1: Start Registry EditorStart Registry Editor
Start Registry Editor...type "regedit" into the run box on the start menu.
Step 2: Delete the UpperFilters registry entry
In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
Expand SYSTEM, and then expand CurrentControlSet.
Expand Control, and then expand Class.
Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
In the details pane of Registry Editor, on the right side, click UpperFilters.
Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?
Step 3: Delete the LowerFilters registry entry
In the details pane of Registry Editor, on the right side, click LowerFilters.
Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
On the Edit menu, click Delete.
Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
Exit Registry Editor.
Step 4: Restart your computer
Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

Tecra M5: DVD drive does not read these mini DVDs

I have canon dvd handycam, and mini dvd works on it. One month back i recorded movie and pictures on mini dvd using handycam and ran mini dvd on my tecra M5 dvd drive, it worked very fine.
Now after 1 month i have 5 mini dvds with movies and pictures which i took on 1 month vacation in diffierent countries, i tried my best but tecra dvd drive does not read these mini dvd, cd drive label appears instead dvd drive when i put mini dvd in it.
All other standard size dvds, cds working fine on it.Its complicated and as well as irritating.
Any suggestions?
Why its messedup?

Seems the lens cannot read this miniDVDs. Possibly the drive lens cannot calibrate and therefore the miniDVDs are nonreadable.
Try the solution from sascha. Maybe youre a lucky man and it works.
If not, try to remove the drive physically from the notebook. Reboot the notebook without the drive. The Windows and BIOS shouldnt recognize the drive.
Then shuts down again, put the drive into the notebook and boot up the unit.
The notebook should recognize the drive and should indicate the firmware again.
Im not sure if this will help you but its attemptable

HT2801 My DVD drive is not reading any DVD

My iMac's DVD drive is not reading any DVD. Whenever I am inserting any DVD, The DVD icon is not appearing and the DVD is ejected out after sometime. I have also tried the troubleshooting steps given in the apple support site by restting the SMC but my iMac still does not read any DVD. What do I do now? Somebody help me.

Could try purchasing a commercially available, retail dry brush CD/DVD lens cleaning system disc. These can sometimes revive a malfunctioning optical disc drive.

Super drive issue not working after upgrade of Maverick or Mountain Liont

Super drive issue not working after upgrade of Maverick or Mountain Liont
try this commands , it will wrk and respond after few trys
go to APPS - Utiltiy - Terminal
Put these commands in
drutil status
drutil info
drutil getconfig
drutil eject
it will keep ejecting for bit or sign of life in it and after couple try in 5 mins it will wrk. and dont waste ur money to buy new one .

Super drive issue not working after upgrade of Maverick or Mountain Liont
try this commands , it will wrk and respond after few trys
go to APPS - Utiltiy - Terminal
Put these commands in
drutil status
drutil info
drutil getconfig
drutil eject
it will keep ejecting for bit or sign of life in it and after couple try in 5 mins it will wrk. and dont waste ur money to buy new one .

CD/DVD Drive is not reading any discs on Equium A100

My cd/dvd drive is not reading any discs whatsoever, blank, written or commercially written. It opens and closes and the light to show it is working is on. Device manager says the device is working properly.
Tried updating drivers, no updates available. Tried system restore back 1 day then 1 week then 1 month and still the problem cannot be rectified. When i put a cd/dvd in the drive and try to access it, it says: D:\ is not accessible. The request could not be performed because of an I/O device error.
Can anybody help me i've tried everything me and my friends can think of, or is it a better idea to just send it back to toshiba under the warranty.

Hello,
Here are a few windows articles that could help.
http://support.microsoft.com/kb/891894/en-us
This one might do the trick, if not try this one.
http://support.microsoft.com/kb/826510/en-us
Hope these help resolve the problem. If not it could be a registry setting error which can be rectified as well. But only if these 2 above do not help to resolve the problem.

My external Iomega DVD drive does not read DVDs. Why?

My external Iomega DVD drive does not read DVDs. Why?

what does this question have to do with a mac? post in the Iomega fourms.

Dvd drive does not read dvd but reads cd only.

my hp compaq 420 core2 duo dvd drive does not read the dvds but only reads the cds. How can i solve this problem, please help me with the correct answer.
This question was solved.
View Solution.

It will likely require replacement of the drive. There is more than one laser in there: one for each function. One can go bad without the other going bad.
608141-001
Above is the part number for the DVD burner drive. I could not find one on eBay. Here is one online:
http://www.mydvddrives.com/replacement-for-hp-compaq-608141-001-sata-cd-dvdrw-dvd-ram-drive-burner-l...
Replacement is easy. Remove a single screw on the bottom and slide the old drive out and replace with the new drive.

DVD drive will not read DVD-Roms

I recently tried to reinstall a game that I had played previously, only to find that my drive will not read it. I can hear the disk spinning, but my computer will not recognize that there is a disk in the drive. I tried some of my other games and I noticed that all of the older games, that ran on CD-Rom, had no trouble installing, while the ones that ran on DVD-Rom never showed up in the drive.
This is strange because I have installed all of these DVD-Rom games on my laptop before with no problem. I've tried doing simple fixes, like updating everything and uninstalling then reinstalling the drivers, but nothing helps.

Hi,
If it worked before then try few System Restore points and check. Could have happened due to some update.
Also provide the Product number of your notebook if restore doesnt help.
Note:
If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
Although I am an HP employee, I am speaking for myself and not for HP.
**Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

My optical drive will not read any music cds now or recognize a blank cd in the drive. it might read some data discs. what is wrong with it and how do i fix it?

My optical drive will not read any music cds or recognize a blank cd. it might read some data cds. what is wrong with it and how can i fix it?

The optics might be dirty. Try running a cleaning CD through it and see if that makes a difference.
If not, it will have to be replace.
Allan

" DVD RW Drive " is not reading / writing DVD. It can read only CD.

HP Pavilion dv6-3140se Entertainment Notebook PC
{Personal Information Removed}
Product Number: XS065EA
" DVD RW Drive " is not reading / writing DVD.
The same DVD can be read on my frnds laptop.
Corresponding drivers r up to date.. I even tried uninstall and then restart and then let my laptop install the required driver automatically. I've tried everything I could find on some forums.
I was told to delete " Upper & Lower filters ". I didnt find Lower filter so I had to delete only "Upper Filter".
Plz assist me..
I will be waiting for ur kind reply.
Thank u so much.

The upper and lower filter thing only applies if the drive is not showing up at all in the Device Manager. If it appears as a drive and will perform any function at all, then it is likely a hardware issue. One way you can be sure is to try to boot from a bootable DVD such as a Windows 7 install Disk. If the computer will not boot from such a disk then it is apparent the hardware is defective, not the Windows software because the problem exists even before Windows loads.
The drive has multiple lasers and it is possible for one to go out but not the others. The drive is easily replaced. See below:
This eBay seller ships worldwide. You would have to transplant your plastic drive face but that is very easy to do:
http://www.ebay.com/itm/HP-Pavilion-DV6-3000-DVD-RW-DVD-RW-Multi-Burner-Drive-TS-L633-603677-001-B-/...

My USB super drive is not reading DVD

when i connect my usb super drive is not reading DVD

External SuperDrive DVD player fix - RESOLVED!
This solution worked for my Superdrive, which I had installed in a USB external case, so now it can play movies using Apples DVD Player App, but additional steps may be needed, as I outline below. I had removed the SuperDrive from my mid-2009 Macbook Pro 15" 2.53 ghz to install a second hard drive with Other World Computing's "Data Doubler" adapter, and mounted the SuperDrive in an OWC Value Line SuperSlim external case.
I don't know if the first two steps below are necessary, but I had done them first, because others suggested them as fixes before I found the solution in the 3rd step.
1) I installed Apple's SuperDrive Firmware Update 3.0, which is on Apple's support site at http://support.apple.com/en-gb/HT201953
2) Then I applied a fix on this page, http://www.hardturm.ch/luz/2011/10/how-to-make-the-macbook-air-superdrive-work-w ith-any-mac/comment-page-12/#comment-106449, using Text Wrangler to edit the preference file at /Library/Preferences/SystemConfiguration/com.apple.Boot.plist by adding code mbasd=1 between the two string values. However, that still did not resolve the problem. I left the preference file with the code “mbasd=1″ included, as outlined on that site.
3) Then, I used the fix at http://macriot.com/mcrt/?p=2294 which requires modification of some code embedded into OS X’s DVDPlayback framework; essentially replacing the words “internal” with “external”
Now my external Superdrive plays movies using DVD Player.

CD drive disappearing/not reading after iTunes 7 installed.

Similar Messages

Maybe you are looking for