CD Drive doesn't respond

The cd drive is blocked with something and I cannot insert cds without a more force than normal. Once the cd is in, there are some sounds, but then the drive just kicks the cd back out. What's going on here?

I am having a very similar problem. My CD drive used to work fine, but a while ago it started rejecting some CDs and now it won't work for any CD. It makes a slow whirring noise as if trying to spin, then a loud churning noise and then it spits them out. But it plays DVDs fine.
Any suggestions?
Thanks

Similar Messages

Graphic driver doesn't respond when running Firefox 4 RC1 and battery mode.

I unplugged AC adaptor from my laptop and started Firefox 4 RC1. Screen was freezed for some time and Windows restarted graphic driver every 2-4min. It was happened on random page (facebook, twitter, some news pages).
Windows 7 32-bit, ATI Mobility Radeon HD2400 (driver: 11.2 (02/15/2011)), Firefox 4 RC1 (clean installation).
It doesn't happened with Firefox 3.6 or with AC adaptor plugged in.
How to fix it?

Just some general comment
Is your battery getting flat ? or have you changed any of the powersaving etc options. Some laptops will make changes when in battery mode and even slow down the CPU etc.
Are you using different settings on firefox 3.6 and 4 ?
* What about your FlashPlayer settings especially the hardware acceleration.
* And what version of flash payer is in use on each computer <br /> check using http://kb2.adobe.com/cps/155/tn_15507.html that tests using the version installed in the current browser
Presumably you have problems only on sites where you are using FlashPlayer, so it may be worth looking at [[Flash-based videos and sound do not play correctly]]. I have noticed whenever new versions of FlashPlayer are released some users will find problems, sometimes the video card drivers need updating.

I am experiencing the problem "your computer restarted because of a problem" from the past 3 months and its mostly everyday, also I click on the report it to apple button and it says report submitted but apple doesn't respond. HELP!

Also I am using a mid 2012 macbok air.
Here is the stuff it showed me:
Interval Since Last Panic Report: 116543 sec
Panics Since Last Report:          1
Anonymous UUID:                    6230F21B-9B4A-4F55-C557-9B70A3D3FBD4
Thu Jun 13 12:46:57 2013
panic(cpu 1 caller 0xffffff800d8b8709): "Double fault at 0xffffff800d828034, registers:\n" "CR0: 0x000000008001003b, CR2: 0xffffff8132e1ff98, CR3: 0x000000000fc28000, CR4: 0x00000000001606e0\n" "RAX: 0xffffff8132e200b0, RBX: 0xffffff7f8df368db, RCX: 0xffffff8132e200b0, RDX: 0xffffff800db74970\n" "RSP: 0xffffff8132e1ffa0, RBP: 0xffffff8132e200a0, RSI: 0xffffff8132e20108, RDI: 0xffffff7f8df368db\n" "R8: 0x000000000000000a, R9: 0x0000000000000010, R10: 0x0000000000000000, R11: 0x0000000000000000\n" "R12: 0x00000000e00002c2, R13: 0xffffff8020fdbf00, R14: 0xffffff7f8df39ee0, R15: 0xffffff8020ea1000\n" "RFL: 0x0000000000010286, RIP: 0xffffff800d828034, CS: 0x0000000000000008, SS: 0x0000000000000010\n" "Error code: 0x0000000000000000\n"@/SourceCache/xnu/xnu-2050.22.13/osfmk/i386/trap_native.c: 280
Backtrace (CPU 1), Frame : Return Address
0xffffff80f5ac5ec0 : 0xffffff800d81d626
0xffffff80f5ac5f30 : 0xffffff800d8b8709
0xffffff80f5ac60a0 : 0xffffff800d8cddcf
0xffffff8132e200a0 : 0xffffff800db74a62
0xffffff8132e200c0 : 0xffffff7f8df31d8d
0xffffff8132e20130 : 0xffffff7f8df2d283
0xffffff8132e201a0 : 0xffffff7f8df2f5a0
0xffffff8132e20260 : 0xffffff800dc4729a
0xffffff8132e202c0 : 0xffffff7f8dda3f3e
0xffffff8132e20330 : 0xffffff7f8e219fed
0xffffff8132e20360 : 0xffffff7f8e219d05
0xffffff8132e20390 : 0xffffff7f8dd9841c
0xffffff8132e20480 : 0xffffff7f8df2fad4
0xffffff8132e204f0 : 0xffffff7f8dd97fae
0xffffff8132e20580 : 0xffffff7f8dd9939e
0xffffff8132e20660 : 0xffffff800dc4729a
0xffffff8132e206c0 : 0xffffff7f8dd9e8fe
0xffffff8132e20790 : 0xffffff7f8ddc25ce
0xffffff8132e20810 : 0xffffff7f8dda431b
0xffffff8132e20880 : 0xffffff7f8dda42a1
0xffffff8132e208d0 : 0xffffff7f8e21a5c1
0xffffff8132e20910 : 0xffffff7f8e214662
0xffffff8132e20940 : 0xffffff7f8dd9841c
0xffffff8132e20a30 : 0xffffff7f8df2fad4
0xffffff8132e20aa0 : 0xffffff7f8dd97fae
0xffffff8132e20b30 : 0xffffff7f8dd9939e
0xffffff8132e20c10 : 0xffffff800dc4729a
0xffffff8132e20c70 : 0xffffff7f8dd9e8fe
0xffffff8132e20d40 : 0xffffff7f8ddc25ce
0xffffff8132e20dc0 : 0xffffff7f8dda431b
0xffffff8132e20e30 : 0xffffff7f8dda42a1
0xffffff8132e20e80 : 0xffffff7f8e21a5c1
0xffffff8132e20ec0 : 0xffffff7f8e214662
0xffffff8132e20ef0 : 0xffffff7f8dd9841c
0xffffff8132e20fe0 : 0xffffff7f8df2fad4
0xffffff8132e21050 : 0xffffff7f8dd97fae
0xffffff8132e210e0 : 0xffffff7f8dd9939e
0xffffff8132e211c0 : 0xffffff800dc4729a
0xffffff8132e21220 : 0xffffff7f8dd9e8fe
0xffffff8132e212f0 : 0xffffff7f8ddc25ce
0xffffff8132e21370 : 0xffffff7f8dda431b
0xffffff8132e213e0 : 0xffffff7f8dda42a1
0xffffff8132e21430 : 0xffffff7f8e21a5c1
0xffffff8132e21470 : 0xffffff7f8e214662
0xffffff8132e214a0 : 0xffffff7f8dd9841c
0xffffff8132e21590 : 0xffffff7f8df2fad4
0xffffff8132e21600 : 0xffffff7f8dd97fae
0xffffff8132e21690 : 0xffffff7f8dd9939e
0xffffff8132e21770 : 0xffffff800dc4729a
0xffffff8132e217d0 : 0xffffff7f8dd9e8fe
0xffffff8132e218a0 : 0xffffff7f8ddc25ce
0xffffff8132e21920 : 0xffffff7f8dda431b
0xffffff8132e21990 : 0xffffff7f8dda42a1
0xffffff8132e219e0 : 0xffffff7f8e21a5c1
0xffffff8132e21a20 : 0xffffff7f8e214662
0xffffff8132e21a50 : 0xffffff7f8dd9841c
0xffffff8132e21b40 : 0xffffff7f8df2d37e
0xffffff8132e21bb0 : 0xffffff7f8df2f5a0
0xffffff8132e21c70 : 0xffffff800dc4729a
0xffffff8132e21cd0 : 0xffffff7f8dda3f3e
0xffffff8132e21d40 : 0xffffff7f8e219fed
0xffffff8132e21d70 : 0xffffff7f8e219d05
0xffffff8132e21da0 : 0xffffff7f8dd9841c
0xffffff8132e21e90 : 0xffffff7f8df2fad4
0xffffff8132e21f00 : 0xffffff7f8dd97fae
0xffffff8132e21f90 : 0xffffff7f8dd9939e
0xffffff8132e22070 : 0xffffff800dc4729a
0xffffff8132e220d0 : 0xffffff7f8dd9e8fe
0xffffff8132e221a0 : 0xffffff7f8ddc25ce
0xffffff8132e22220 : 0xffffff7f8dda431b
0xffffff8132e22290 : 0xffffff7f8dda42a1
0xffffff8132e222e0 : 0xffffff7f8e21a5c1
0xffffff8132e22320 : 0xffffff7f8e214662
0xffffff8132e22350 : 0xffffff7f8dd9841c
0xffffff8132e22440 : 0xffffff7f8df2d37e
0xffffff8132e224b0 : 0xffffff7f8df2f5a0
0xffffff8132e22570 : 0xffffff800dc4729a
0xffffff8132e225d0 : 0xffffff7f8dda3f3e
0xffffff8132e22640 : 0xffffff7f8e219fed
0xffffff8132e22670 : 0xffffff7f8e219d05
          Backtrace continues...
      Kernel Extensions in backtrace:
         com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f8dd95000->0xffffff7f8ddf0fff
            dependency: com.apple.iokit.IOPCIFamily(2.7.3)[1D668879-BEF8-3C58-ABFE-FAC6B3E9A292]@0xffff ff7f8dd6c000
         com.apple.driver.AppleUSBHub(5.5.5)[54546EC2-8891-334B-9626-1EF6A02450DE]@0xfff fff7f8e213000->0xffffff7f8e227fff
            dependency: com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f8dd95000
         dl.uds.netusb.controller(1.0d1)[8A6F03A2-5A6B-7137-C413-815E20000EB4]@0xffffff7 f8df25000->0xffffff7f8df41fff
            dependency: com.apple.iokit.IOUSBFamily(5.5.5)[A276B40E-978D-3623-93D3-8621B3CEECFC]@0xffff ff7f8dd95000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
12D78
Kernel version:
Darwin Kernel Version 12.3.0: Sun Jan 6 22:37:10 PST 2013; root:xnu-2050.22.13~1/RELEASE_X86_64
Kernel UUID: 3EB7D8A7-C2D3-32EC-80F4-AB37D61492C6
Kernel slide:     0x000000000d600000
Kernel text base: 0xffffff800d800000
System model name: MacBookAir5,2 (Mac-2E6FAB96566FE58C)
System uptime in nanoseconds: 117875499067298
last loaded kext at 105449581298871: com.apple.driver.AppleUSBTCKeyEventDriver          237.1 (addr 0xffffff7f8f551000, size 12288)
last unloaded kext at 105568296897670: com.apple.driver.AppleUSBCDC          4.1.23 (addr 0xffffff7f8f545000, size 12288)
loaded kexts:
foo.tap          1.0
foo.tun          1.0
dl.uds.netusb.controller          1.0.0d1
com.rim.driver.BlackBerryUSBDriverInt          0.0.74
com.apple.driver.AudioAUUC          1.60
com.apple.filesystems.autofs          3.0
com.apple.iokit.IOBluetoothSerialManager          4.1.3f3
com.apple.driver.ApplePlatformEnabler          2.0.6d1
com.apple.driver.AGPM          100.12.87
com.apple.driver.X86PlatformShim          1.0.0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleBacklight          170.2.5
com.apple.driver.AppleMCCSControl          1.1.11
com.apple.driver.AppleIntelHD4000Graphics          8.1.0
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AppleHDA          2.3.7fc4
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleMikeyDriver          2.3.7fc4
com.apple.driver.AppleIntelFramebufferCapri          8.1.0
com.apple.driver.AppleSMCPDRC          1.0.0
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.ApplePolicyControl          3.3.0
com.apple.driver.AppleSMCLMU          2.0.3d0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleUSBTCButtons          237.1
com.apple.driver.AppleUSBCardReader          3.1.7
com.apple.driver.AppleUSBTCKeyboard          237.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.3.1
com.apple.driver.AppleUSBHub          5.5.5
com.apple.driver.AppleUSBXHCI          5.5.5
com.apple.driver.AirPort.Brcm4331          614.20.16
com.apple.driver.AppleAHCIPort          2.5.1
com.apple.driver.AppleUSBEHCI          5.5.0
com.apple.driver.AppleSmartBatteryManager          161.0.0
com.apple.driver.AppleEFINVRAM          1.7
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleACPIButtons          1.7
com.apple.driver.AppleHPET          1.8
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.7
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.kext.triggers          1.0
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOSurface          86.0.4
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.iokit.IOAcceleratorFamily          30.14
com.apple.driver.DspFuncLib          2.3.7fc4
com.apple.iokit.IOAudioFamily          1.8.9fc11
com.apple.kext.OSvKernDSPLib          1.6
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.1.3f3
com.apple.driver.AppleSMBusController          1.0.11d0
com.apple.driver.AppleHDAController          2.3.7fc4
com.apple.iokit.IOHDAFamily          2.3.7fc4
com.apple.driver.AppleSMBusPCI          1.0.11d0
com.apple.driver.X86PlatformPlugin          1.0.0
com.apple.iokit.IOBluetoothFamily          4.1.3f3
com.apple.driver.AppleGraphicsControl          3.3.0
com.apple.iokit.IONDRVSupport          2.3.7
com.apple.driver.AppleSMC          3.1.4d2
com.apple.iokit.IOGraphicsFamily          2.3.7
com.apple.driver.IOPlatformPluginFamily          5.3.0d51
com.apple.driver.AppleUSBMultitouch          237.3
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.driver.AppleThunderboltDPInAdapter          1.8.9
com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.9
com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.6
com.apple.driver.AppleUSBMergeNub          5.5.5
com.apple.driver.AppleThunderboltNHI          1.6.3
com.apple.iokit.IOThunderboltFamily          2.2.6
com.apple.iokit.IOUSBUserClient          5.5.5
com.apple.iokit.IO80211Family          522.4
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOAHCIFamily          2.3.1
com.apple.driver.AppleEFIRuntime          1.7
com.apple.iokit.IOHIDFamily          1.8.1
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220.2
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          345
com.apple.driver.AppleKeyStore          28.21
com.apple.iokit.IOUSBMassStorageClass          3.5.1
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.5
com.apple.iokit.IOStorageFamily          1.8
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.5
com.apple.iokit.IOUSBFamily          5.5.5
com.apple.driver.AppleACPIPlatform          1.7
com.apple.iokit.IOPCIFamily          2.7.3
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0
Model: MacBookAir5,2, BootROM MBA51.00EF.B02, 2 processors, Intel Core i7, 2 GHz, 8 GB, SMC 2.5f7
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434353153364D465238412D50422020
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434353153364D465238412D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xE9), Broadcom BCM43xx 1.0 (5.106.98.100.16)
Bluetooth: Version 4.1.3f3 11349, 2 service, 11 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: APPLE SSD SM256E, 251 GB
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1d100000 / 2
USB Device: hub_device, 0x0424 (SMSC), 0x2513, 0x1d180000 / 3
USB Device: BRCM20702 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x1d181000 / 6
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x821f, 0x1d181300 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8404, 0x1d183000 / 5
USB Device: Apple Internal Keyboard / Trackpad, apple_vendor_id, 0x024c, 0x1d182000 / 4
USB Device: hub_device, 0x8087 (Intel Corporation), 0x0024, 0x1a100000 / 2
USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x8510, 0x1a110000 / 3

Apple doesn't respond to crash or panic reports. They're for internal use only.
Any or all of the following third-party system modifications may be contributing to your problem:
OpenVPN client
Driver for unknown USB network device
BlackBerry Desktop Manager
If the panic is recurrent, I suggest you uninstall them, one at a time, according to the developers' instructions, to see whether you can determine which is at fault. A conflict between modifications may be involved. Reboot and test after each uninstallation.
Back up all data before making any changes.

Screen ipad doesn't respond during video viewing home sharing with multiple iOS devices simultaneously

A have a problem with the videos app and iTunes home sharing on multiple iOS devices.
This is my setup. On my iMac 2006 with Snow Leopard I have:
- 100+ dvd's ripped in my iTunes movie section
- 600+ episodes ripped in iTunes TV-section in 35 TV-shows
- 1 apple tv, 1 iPad 2, 1 iPad mini
On an average evening my family is watching different tv-shows simultaneously on the apple tv, the ipad, an iphone, and an ipad mini.
This is done through home sharing on the one iTunes library.
All updated apps, software etc..
What happens on the ipads, after viewing for more than 10 minutes, the user interface doesn't show up when tapping the screen. The touchscreen doesn't respond, only the home button works. Clicking the home button closes the app, but the sound of the video keeps on playing. Opening up the videos app again gives a black screen with sound still playing and still no button or UI.
The only workaround which currently works is killing the videos app. Power off the ipad and power on again, reconnect to the shared library, wait until it has found all the content (1+ minutes) and startup the tv show again.
All in all, a nasty way to pause your viewing or switching to another movie of tv episode, or even wanting to finish viewing.
The problem has haunted me for a year now, patiently waiting and hoping software-updates would fix it. They didn't.
A fix would obviously hugely improve my user experience, getting it on par with Apples usual quality of service.
Anyone familiar with this problem? Apple: is it possible to fix it in an update?

Same here for over a year now.
You cant imagine how happy i am that im not the only one with this problem.
many of frinds have the same setup as me (ipad 2, 27"imac, express, apple tv 2)
No problem
I had the problem on Snow Leopard, lion and now on mountain lion.
I'am also starting to get a new problem - sometimes when waching a movie on iPad or ATV it just quits the movie and you have to start it again
on the iPad most of the time it also shows the wrong cover art. I tried all the hints here, and i works for a day or two then its wrong again
I store my itunes library on an external drive - you ???

Cd drive doesn't work since loading itunes

Since installing itunes my computer's cd doesn't work. How can I fix this problem?

Last month my girlfriend was trying to import songs from a cd into her iTunes (v4.7) on her laptop. Her cd-rom drive quit responding. The computer recognizes that the cd drive is there, but it won't recognize any disks. If you put a disk in, the drive doesn't even spin the cd. This happens when itunes is on and off. When I try to access the device via DOS, I get the message, "the device is not ready".
I figured that it was probably her laptop cd-rom crapping out. So, since she could no longer use her computer to put her songs onto her ipod, I was letting her use mine. I had an even older version of itunes V4.1 or 4.2. Now, I hadn't tried to import songs into iTunes in a long time. Lo and behold, I try to import a cd (Death Cab for Cutie:Something About Airplanes) and the cd stops responding. It's the exact same thing that happened to my girlfriends laptop. I tried to update to v5 but that didn't help. When I do the cd diagnostic, the offending drive says "Drive is empty".
On my computer, I have removed upper and lower filters in the registry...no change. I have never had easy cd creater, but we both have ahead Nero Burning Rom software. I can't boot from the drive. I have uninstalled the drive and let windows re-detect it...no change. Windows detects the drive, it just won't read anything...no audio cds, no data cds...
We are now down 2 cd drives and we only have one left.
Is this what you have experienced Randy?

I have a 2009 Mac Pro 10.8.3 and half of the time Disc Utility doesn't respond? Any ideas?

I have a 2009 Mac Pro 10.8.3 and half of the time Disk Utility doesn't respond and I have to force quit and restart the machine. Any ideas?

You have some (major) issues.
Are you in Recovery Mode ? Used Option key or Command R to get there?
I would grab the ML installer ESD you saved and do a clean install on another drive and begin to rebuild to a new system.
You may or may not have TimeMachine but have backed up problem files.
Having a bootable backup clone of your system is a must.
Hard shutdowns will add more layers of problems and add to whatever there was before.
Generally there is not a need to use Disk Utility other than to repair permissions either before or after installing updates.
Have you:
tried with everything else unplugged so you don't have any external devices
tried with a safe boot
Why.
After any forced shutdown you should use ML Recovery and one Safe Boot on the first next boot from a working system.

How to eject a cd when the normal ejecting function doesn't respond

How do I eject a disc that doesn't respond to the normal ejecting function?

Five ways to eject a stuck CD or DVD from the optical drive
Ejecting the stuck disc can usually be done in one of the following ways:
1. Restart the computer and after the chime press and hold down the left mouse button until the disc ejects.
2. Press the Eject button on your keyboard.
3. Click on the Eject button in the menubar.
4. Press COMMAND-E.
5. If none of the above work try this:
Open the Terminal application in your Utilities folder. At the prompt enter or paste the following:
/usr/bin/drutil eject.
If this fails then try this:
Boot the computer into single-user mode. At the prompt enter the same command as used above. To restart the computer enter "reboot" at the prompt without quotes.

C4585 doesn't respond - PC trying wrong IP address

When I attempt to enable network printing on my C4585, the computer attempts to communicate with it at IP 192.168.1.71, but the printer (according to its own setup sheet, and the router) is on IP 192.168.1.78. The computer does seem to realise this partway through the setup, but still reports that the printer is not responding on 192.168.1.71.
Here's the sequence of messages during the installation:
Connecting to printer…Checking settings for network adapter Edimax nLite Wireless USB Adapter ...
Starting networking services ...
Searching for CN8BCFB17H057K ...
Searching for Hardware Address (MAC) of 00237dace55d ...
Sending PING request to 192.168.1.71 ...
Checking network topology ...
Starting networking services ...
Sending SLP request to 192.168.1.71 ...
Checking wireless radio ...
Checking gateway 192.168.1.254 ...
Checking subnet mask 255.255.255.0 ...
Checking IP address 192.168.1.78 ...
Checking IP address 192.168.1.78 ...
After this it fails, and a new dialog box pops up to tell me that it couldn't communicate with the printer on 192.168.1.71.
I've tried manually adding a new TCP/IP printer port using the Windows printer properties, pointing to IP 192.168.1.78, but the printer doesn't respond on that address.
Other notes:
- I'm on Windows XP (the computer is several years old)
- when I install the printer software (downloaded from the HP website last year), it throws up an error near the end of the installation, telling me that it's looking for a feature which is only available on a CD
- printing works fine over USB
Any suggestions? I'd like to either clear the printer's current IP setting so that it can get the same one that the computer wants to contact it on, or else tell the computer to use the printer's IP address.
I'll try redownloading the printer driver now and reinstalling, in case that helps. Any other suggestions would be appreciated.

Hi leighcaldwell,
First, uninstall the HP software using the scrubber method.
1. Type %temp% in the run field
2. Look for, and open the folder starting with 7z (Example: 7zS2356)
3. Open folder Util
4. Open folder CCC
5. Run the L3uninstall.bat if you have an HP computer, otherwise L4uninstall.bat
6. When the uninstall has completed restart the computer
7. Run Disk cleanup from Accessories\ System Tools
8. Restart the computer but do not reinstall yet.
Then reset the wireless on the printer:
To restore network defaults
1. Press the Wireless button on the product.
2. Press the button next to the down arrow on the display until Restore Network
Defaults is highlighted, and then press OK.
3. Confirm that you want to restore the network defaults.
Reinstall the software for a wireless connection type.
I was an HP employee.
Please mark the post that solves your problem as "Accepted Solution"

IDVD '08 doesn't respond anymore when trying to browse the media files

I created a new project, selected a theme and then clicked "Media" to drop the Media files into my DVD project. For some reason, after that, iDVD doesn't respond anymore. I see no disk activity (with iostat) and I see iDVD consuming a lot of CPU cycles (with top) .
Any idea why this might be happening? It is getting a bit frustrating.

tell us about the content you are trying to use within iDvd'08.
Might you have any Non-standard QT plugins on your mac (ie, Perian or Divx)?
also tell us how much available hard drive space is remaining on the boot volume / your main HD.
Take a look in your console log /crash reports and post the info on this forum.
apple > about this mac > more info > Software > Logs
http://docs.info.apple.com/article.html?artnum=302988
http://discussions.apple.com/thread.jspa?messageID=6682333&#6682333
Message was edited by: SDMacuser

After upgrade to Win 10 ENVY TouchSmart 15-j001tx Notebook PC display doesn't respond to touch

I just upgraded to Windows 10 from 8.1 and after I did, my touch screen doesn't respond or work. I basically have a non-touch display... ugh I've searched this forum and the hp support for possible drivers but don't see anything. I've even tried the Win 10 Drivers Update process with no success. Any suggestions?

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP ENVY TouchSmart 15-j001tx Notebook and the Touch display doesn't respond to touch after a Windows 10 update. If your computer is having problems finding and installing operating system updates, try using the Windows Update Troubleshooting tool to fix the problem. Here is a document that shows how to update drivers that are not working correctly with Windows 10. Here is a link to your driver page. I would try the section on Driver -Chipsets. Intel Management Engine Interface Driver should help. Restart the Notebook after the install. I hope something here helps you. Thanks.

Tecra M4 - DVD drive doesn't recognize any disk under Vista

Hi,
after the installation of Vista my dvd drive doesn't recognize any disks !
No upgrade from XP! It was a clean Vista installation.
I found several links about the registry entries upper and lower filter this entries doesn't exist in my registry under the class CDROM.
I tested the drive under XP it works fine and recognizes everything.
Drivers are correctly installed no problems in the device manager is prompted.
So i have no idea how to get it working, seems to be a Vista problem
Could any one help me ? I'm really frustrated about this
Thanks for your help

Maybe this helps:
- Remove the CD/DVD drive from the device manager.
- Then access the registry and remove the Upperfilters and Lowerfilters values completely from the following registry key:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
- Then reboot the notebook
But what happens exactly? What disks are not recognized?

Optical drive doesn't work all the time

My optical drive doesn't mount movies i bought on dvds. IT'S like it has a mind of its own, it only plays movies when it feels like it and forget any install dvds like Snow Leopard, printers etc...! What's the problem with it? I cleaned it and all my dvds are like brand new, no scratches or any thing.

Hello marinfo
Welcome to Apple Discussions
It is normal for all the fans to be running all the time.
If your iMac is making noise, then there is something wrong and you need to take it in for service.
Dennis

SAP Business One 8.8. Report doesn't show and workstation doesn't respond.

Hi all,
We have a customer with:
SAP Business One 8.8 (8.80.237) PL: 19 HOTFIX1.
Sql Server 2005
Crystal Reports 12.1.3.1028
We have done some reports wich run under server machine but not under workstation.
Even i've done a dummy report without any data connection and it doesn't run under workstation (server machine works perfectly). This dummy report only show a label with static text "Hola".
We don't receive any error message, SAP Business One client doesn't respond and in task manager you can see "not responding" message.
SAP support connected to our customer installation and they suggested us formatting workstations computers. We did it but the problem persists. Thank you very much for your help.
Kind regards,
Nauzet Díaz

Hi,
In this case, why you not responded to SAP for their suggestion of formatting the workstation?
If you unfortunately closed the old support ticket, then just raise a new support ticket with reference of the old one too.
Regards,
Bala

Lumia 900 doesn't respond while charging

Hi, so basically my AT&T Lumia 900 doesn't respond to my touch during charging. If I unplug the phone it responds fine, but when it's plugged in it can't pick up any of my touch commands. Even if I draw across the screen very slowly I get nothing. I live in New Zealand and we have 240v/50mA power sockets over here but the charger says that's within the range it's supposed to handle. Is this a hardware problem with my phone and how can I fix it?
The phone is running windows phone 7.5 (ver. 7.10.8779.8). Any help would be appreciated, thanks.

I've only received the phone on Thursday and this is the second time charging it (I read somewhere that I should drain the battery completely the first few times to condition the battery, but after finding that some phones bricked themselves when the battery was completely empty I avoided it). In both cases the same thing seems to be happening however the first time was not as severe I feel and I attributed it to the screen protector thing (the "Talking and Driving it can wait" thing from AT&T already attached out of the box). When the phone is at 100% though I have no lag.

What does this mean: The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry.??

Is this an iTunes or disc issue? I have burned music to these disc before.
Error message: "The attempt to burn a disc failed. The disc drive didn't respond properly and can't recover or retry."
Using........
iTunes 10.7
Memorex Music CD-R 40X 700MB 80min
MacBook Pro
Mac OS X 10.7.5
2.4 GHz Core i5
4 GB 1333 MHz DDR3

Not sure. Try this:
Troubleshooting CD burning errors:
http://support.apple.com/kb/HT2955

CD Drive doesn't respond

Similar Messages

Maybe you are looking for